Query Glossary for words beginning with a specific letter

I am going to have a page that is a glossary of terms. It's a 2 field table.  Word and Definition.  Is there a way to pull all the words beginning with a specific letter?  How complicated would that query be?

select * from mytable where word like "A%"

Similar Messages

  • Is RoboHelp for Word packaged with RoboHelp 11?

    Is RoboHelp for Word packaged with RoboHelp 11?

    No. The last version to include Rh for Word was Rh10. Is there a specific reason for wanting to stick with Rh for Word? There is a learning curve with Rh HTML but it shouldn't be too difficult.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Are you aware that people make thrash apps beginning with the AAA letter just to be the first app you see in AppStore, so its harder to find the true apps with all that thrash?

    Are you aware that people make thrash apps beginning with the AA letter so they can be found before the other good apps? Its now hard to properly scroll the new app with all the thrash.

    Am I aware? Yes. But I am just another Apple user and developer. Is Apple aware? Does Apple care? You need to tell Apple that you are aware and you care by sending feedback: https://www.apple.com/feedback/
    Of course, the fact that Apple doesn't even have a feedback category for the App Store might be some indication of how much they care.

  • Robohelp 8 for Word: Problem with the Hotspot Topic

    Hello Everybody:
    I'm a beginner user of Robohelp 8 for Word trial version. My project is a WinHelp 2000, imported from a version X3, and I have a problem with Robohelp when I save the value "Topic" of the property "Jump" of the tab what is called "General" at the window "Hotspot Properties". This Hotspot is part of a Shed Image (accesible from Help Image Properties > Shed ...  > Image Workshop > Properties button). After edit the topic, I press the "Aceptar" (OK) button (note that I use a Windows XP SP3 Spanish Version and some buttons are located)  and close the Hotspot Properties window, and I close Image Workshop window too.
    If immediately after I open the Image Workshop window and the same hotspot property window edited before, Robohelp lose the new value "Topic" and only it puts one letter. When I make the compilation they are multiple errors like this: HC3025: Warning: ESTA0058_2.SHG :  Jump to undefined Topic ID: "A".
    Please, help me. Thank you very much.
    P.D.: This image shows the problem:

    The licence you bought was for RoboHelp Office which includes both the RoboHelp for Word and RoboHelp HTML applications. Each of these three has it's own installation file so I suspect that they have installed just the RoboHelp HTML application. They should have the details for the RoboHelp for Word application, or better still the RoboHelp Office application which gives you the options of what to install according to your needs.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • RoboHelp for Word 7 with version 5 source files

    I am trying to compile a WinHelp 4 file in RoboHelp 7, and it
    will not compile. The project is old and was last used in RoboHelp
    X5. I would love some suggestions. This is a very large help file
    and I don't want to recreate it.
    Working on a Windows XP pc.

    I am having the same problem.
    A colleague sent me some Robo for Word projects that were
    created with X5. I cannot work on them.
    I have uninstalled and reinstalled RoboHelp 7 &
    downloaded both patches. I can create and compile new projects in
    Robo.
    However, when I try to open one of these X5 projects, or one
    of the project documents, the RoboHelp Explorer becomes
    unresponding.
    I tried creating a new project & copying a doc into the
    new project's doc, tried importing one of the problem docs into a
    new project, tried deleting the .rtf files out of the old project.
    In all cases, the Explorer stops responding.
    Grateful for any other ideas.

  • I'm looking for a computer with these specifications, can anyone help me?

    I need to know if anyone can give me the names of a few laptops that have these MINIMUM specifications:
    Intel Pentium 4 or AMD Athlon 64 Processor or any better processor
    4 GB of RAM
    Windows 7
    1280 X 800 or more with qualified hardware-accelerated OpenGL graphics card, 16 bit color, and 256MB of dedicated VRAM (not Shared Memory)
    Graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics card.
    DVD-drive compatible with dual-layer DVDs, Read/Write drive
    QuickTime 7.6.2 or newer
    I'm going to an art school, and will probably be getting into some Graphic Design stuff, so if you don't know a computer that has a lot of these specific terms, could you give me perhaps a few names of good laptops for art students to buy?

    Hello Balkoth,
    I work for Intel and aside from this being my job, I'm going to tell you to consider investing in a stronger processor. If you are going to be getting into Graphic Design, you will need more processing power. For your needs, I would suggest looking into the new Intel® Core™ i7 processor.
    This is our top-of-the-line processor, ahead of the curve and will continue to perform as technologies continue to emerge. Not only will you have graphics support for Shader Model 3.0, and OpenGL 2.0, DirectX 9-capable graphics cards, but the i7 has Turbo Boost Technology (Speeds up your processor when you computer needs more performance) and  Hyper-Threading Technology (multitasking that allows your computer to work on two tasks at the same time). Even if you don't need all of these features now, you never know what you will need down the line. My general rule of thumb is to never buy something that is already behind the curve.
    I would also recommend you looking into our other smart processors, i3 and i5, but I believe the i7 will be the best for your processing needs. Here is a couple computers I found with i7 processors and Windows 7 that you were looking for. Hope this helps!
    Intel- Sponsors of Tomorrow 
    Dell Studio Laptop with Intel® Core™ i7 Processor - Black Chainlink
    Model: S1747-3209CBK | SKU: 9718895
    Watch your favorite movies in high-definition or create customized CDs and DVDs with this laptop's DVD±RW/CD-RW drive with Blu-ray Disc support. The built-in 2.0MP webcam and 17.3" high-definition plus display are handy for video chatting with friends and family. Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel.
     4.7 Read reviews (65)
    Sale: $949.99
    Toshiba Satellite Laptop / Intel® Core™ i7 Processor / 16" Display - Slate
    Model: A665-S6070 | SKU: 9992966
    This laptop features an Intel® Core™ i7 processor, 4GB memory and a 640GB hard drive for fast computing and ample file storage. The 16" widescreen TFT-LCD display and NVIDIA GeForce graphics provide a crisp, clear picture.Windows 7 Home Premium preloaded Which Windows 7 edition is best for you? Compare.Learn more about Intel® processors. Information provided by Intel. Take a product tour.
     1 Read reviews (1)
    Sale: $899.99
    Apple® MacBook® Pro / Intel® Core™ i5 Processor / 15.4" Display - Aluminum
    Model: MC372LL/A | SKU: 9911539
    Video chat with friends and family using this laptop's iSight webcam with omnidirectional microphone and 15.4" widescreen display. Enjoy high-speed wireless access via the built-in AirPort Extreme wireless network connection.
     5 Read reviews (5)
    Sale: $1999.99
    I am an Intel employee and state that my opinions are my own personal opinions and are not made on behalf, or to represent, Intel.

  • IWork Pages - How to make sentences begin with a capital letter?

    After loading Mavericks I updated my PAGES app to Version 5.0. 
    Cannot figure out how to start each sentence with the first letter capitalized automatically.

    If 'dropped' that would be a real bummer!
    I really would like to purge Microsoft Word 4 from all my Macs.  I was really hoping Pages has matured into a modern robust word processor. The opposite seems the case....it seems more basic than the Mac word processors of the late 1980's.  Thanks for your input........not good news if true.......but I'm afraid you are right.

  • Search for all words in a table column that any of the words start with a certain letter

    I have products table. Each row has a Description which may have a few words within it. I wanted to know if it's possible to search through it and find all descriptions that have match the search. But, I want it to consider it a match even if it's not the
    first word of the description, but rather the start of any word in the description.
    For example:
    Descriptions
    Nice Casual Gloves(This should show up, and although it's not in the very beginning of the description it's at the beginning of a new word.)
    Nice Dressy Gloves(This should show up, and although it's not in the very beginning of the description it's at the beginning of a new word.)
    Great Dresses (This should show up)
    Fancy Outerwear
    Glasses (This should show up)
    Shoes
    Sheer Stockings (This should not show up because although it has a "g" it's not in the beginning of a word.)
    Boots
    Galoshes (This should show up)
    I would want to search within this list Where Description like 'G%' but I don't want it to only get the descriptions that start with "g" at the beginning of the description, but rather any "g" at the beginning of any word. I do not want
    to get all descriptions that have a "g" somewhere in the word (then I could just do WHERE DESCRIPTION LIKE '%g%'), rather only if it somewhere within the description but at the beginning of any word.
    Thank you so much
    Debra has a question

    The most perfect solution would be to get a CLR routine to either (a) Do a regular expression match, (b) Run a split routine at CLR speeds then do a simple LIKE, or (c) both (a) and (b).  If your requirements grow to handle more and more complex searches,
    you may have to do it that way eventually.
    However, like the other answers, here's a way to do it reasonably well given your current requirements.  You may have to tweak the REPLACE logic if you have frequent OTHER forms of word delimiters.
    Method:  Pull data; add space before and after original text; replace all common word separators other than space with a space (so for example, "(These pretzels)", "He said 'These pretzels are making me thirsty" and so forth would
    be replaced with a space before "The"; then do a Patindex (you could do with just a LIKE also) on the search string prefaced with a space.  Here's an example, stealing from table sys.messages just for ease of demonstration.
    With SampleData as
    Select top 100 *
    , ' ' + Replace(Replace(Replace(Replace(text, '"', ' '), '''', ' '), '/', ' '), '(', ' ') + ' ' as TextPlus
    from sys.messages
    where language_id = 1033
    Select TextPlus
    , patindex('% The%', textplus)
    from SampleData
    where patindex('% The%', textplus) > 1
    Same logic, in the most concise format:
    Select top 100 Text
    from sys.messages
    where language_id = 1033
    and ' ' + Replace(Replace(Replace(Replace(text, '"', ' '), '''', ' '), '/', ' '), '(', ' ') + ' ' like '% the%'

  • Searching for inspection lots with a specific result

    Hi,
    Is there a way to search for an inspection lot or point containing a specific result?
    Like show me all the inspection lots where characteristic "color" is entered as "red"
    thanks,

    Hi Alper,
    To get it for specific material, there is an STD report available.
    Try QGP1.
    Regards,
    Shyamal
    Edited by: Shyamal Joshi on Jan 2, 2009 7:00 PM
    Or there is an other way also but for that thing you need to strictly follow the below steps, without fail.
    - Go to any inspection lot (T Code QA13) where this MIC's result is recorded. Ideally UD should be completed for this lot.
    - In the "Characteristic" screen click on the "Chars relevant for usage decision", so it will display you all the results.
    - Now click on the appropriate MIC. e.g. click on the MIC "color".
    - Now click on the Result History or "Cntrl+F9".
    - A small selection window will pop-up.
    - Here there will be two main selections are available, 1> with Inspection Char. and 2> with Master insp. char.
    - We need to "Master insp. char." activated (GREEN)
    - Now at lower part of this screen there are four sub selection tabs such as Material, Object, Inspection lot, & time are available.
    - In all the tabs a check box "Selection Active" is available, deactivate it.
    - As soon as you deactivate it, the selection criteria will change into Yellow colored triangle.
    - Noe Execute this selection.
    - It will give you the data as you are looking for.
    Pls revert if there is any query.
    Regards,
    Shyamal

  • Query required for JE posted with the customer

    Dear Experts,
                   Following is the scenario - Accountant passes Journal Entries once in a while with regard to customers also, i would require a alert for the scenario.
                    Whenever the user posts a JE with regard to a customer alert has to generate to the manager else a query report is required would do.
    Saravanan

    Hi,
    You can use the below as an alert for Manual Journal Entries that has been created the last 2 days with posting to Business Partner account.
    SELECT t0.transid, t0.shortname
    FROM JDT1 T0 INNER JOIN OJDT T1 ON T0.TransId = T1.TransId
    WHERE shortname <> account and  T1.createdate > getdate()-2 and t0.transtype = 30
    If you want to have a different date range just change the '-2' to the amount of days you want, if you only want entries created today, just remore it. If you prefer it to be by posting date rather than by creaation (system) date, just change createdate to refdate.
    Hope it helps,
    Jesper

  • Shall v maintain price control  for material type with plant specific ?

    Hai Guru,
                       In OMS2, we change HALB price control [valuation] as V or S.  whether shall v maintain this for plant specific.?
    Kindly guide
    With Regards
    Swetha

    Hi
    if you do not make the indicator Price control manadatory active then you can have different price indicator for each plant. However thsi indicator is never done plant specific. If you wish to have plant specific then you may have to have a new material type and again you need to control the MM01 creation for that particular plant by means of Authorisation control which is littel involved also but can be done.
    Regards

  • Quick Office for Word docs with tracking

    Can I use Quick Office for iPad to view Word docs and see the tracking changes? I don't think so, but thought I'd ask. I did a search and didn't see this posted but I could have missed it. If I did, apologies for the redundancy.

    From what I've read on here, none of the Office apps are able to track changes.

  • Change Open With for all files with a specific extension

    Hi, I've been using OS X for quite some time, but more recently cannot see how you do the following which is proving frustrating:
    * Open Get Info for a file,
    * Use the drop down under Open With to choose Other,
    * Select an appropriate application that wasn't on the drop down list (in this case Smultron text editor for CSV files),
    * Press the Change All button and the drop down turns back to Excel which was the previous default.
    So basically, how do I change all files with CSV extension to Smultron when Smultron wasn't in the list of Open With items and I have to use Other from the list. This is repeatable for any file type with any application that isn't listed and is on both my iMac and my work's MacBook. Try it yourself and you'll see what I mean!!
    Thanks

    Stuart Mchattie wrote:
    Thanks NeroWolf,
    Your solution does work for that single file, but doesn't change the system wide association of that file extension with a particular application. It is because this works that I believe the problem I am having is uncircumventable and is in fact a bug in the OS. Could anyone else confirm this?
    Cheers,
    Stuart
    It might be a bug. What I found is that the icon does not change unless I log out/in or reboot, even when the app normally puts an icon on the file.
    For example if I change an audio file to always open with VLC, it does even though the icon remains as before. However, even though clicking plays the audio with VLC, if I right click the file and select "Open With" it still says iTunes (app) default which is incorrect.
    Message was edited by: nerowolfe

  • Need a SCCM SQL Query Report for Installed Software with Packages and Applications.

    I need a report that will show the number of installs of all of the workstations applications and packages over a given period of time. 
    This will let us know how effective our deployments are and how well the on-demand software is being adopted.
    Any help?

    Your Install Source might be an option as most SCCM deployments will install from C:\Windows\ccmcache\xx [where xx is a random folder name]. Most software vendors will put an install source in the registry, but not all do, so it won't be completely accurate.
    When software is installed manually, the install source path won't be C:\Windows\ccmcache\xx.
    Here is a SQL query I have for Install Source:
    SELECT v_GS_COMPUTER_SYSTEM.Name0 as 'Computer Name', v_GS_INSTALLED_SOFTWARE.ProductName0 as 'Software Title', v_GS_INSTALLED_SOFTWARE.InstallSource0 as 'Install Source', v_GS_INSTALLED_SOFTWARE.ProductVersion0 as 'Version', v_GS_INSTALLED_SOFTWARE.InstalledLocation0
    as 'Installed Location', v_GS_INSTALLED_SOFTWARE.InstallDate0 as 'Install Date'
    FROM v_GS_COMPUTER_SYSTEM INNER JOIN v_GS_INSTALLED_SOFTWARE ON v_GS_COMPUTER_SYSTEM.ResourceID = v_GS_INSTALLED_SOFTWARE.ResourceID
    WHERE v_GS_INSTALLED_SOFTWARE.ProductName0 like '%Office 365 Pro%'
    ORDER BY v_GS_COMPUTER_SYSTEM.Name0

  • Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

    The broken image symbol appears in place of the images but associated web links do work ok.
    Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
    Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
    Any help appreciated.

    You only need to post a URL to your web site. We can see your code in Browser.
    So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
    You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

Maybe you are looking for