Query header not to display

Hi
I am using BW 3.1 version
Is that possible to not display Report header in WORKBOOK,
Do we have any setting to take off header level
i mean to say when we execute Report it displays the filters and Characteristics and Key figures whet ever we use in our report that i don't want to display directly i want display only RESULT
Thanks,
gal
Edited by: GAL BI on May 7, 2010 4:55 AM

Hi
Open your query in analyzer-> go to design mode and you will be able to see some text boxes [ image with T symbol] remove those text boxes and save it and exit from design mode.
Let me know if not works
-Ashwin

Similar Messages

  • Header not getting  displayed in the next page in the second table

    Dear Experts ,
    I have a query regarding Header not getting  displayed in the next page in the second table of the main window. .Let me elobrate the issue.
    I have a smartform in which there are  2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is  for future delivery date P O separated by text in between.
    Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
    Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
    Please provide a elobrate solution on this problem as the requirement is urgent.
    Thanks,
    Regards,
    Sachin Hada

    Hi Sachin,
    you need to cteate two pages FIRST and NEXT.
    in first page --> FIRST
        next       --> NEXT
    in next page
      page---> NEXT
      next ---> NEXT.
    you copy the first page main window is the same in next page
    aslo
    I think help ful for you
    thanks & Regards
    BHUPAL.

  • Adhoc Query data not getting displayed on Portal

    Hi,
    I have a problem with custom Adhoc query data not getting displayed on the portal.
    It was getting displayed initially but after a user made some changes to the query its not getting displayed.
    The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
    Can anyone help me on this.
    Also if anyone can tell me how do i debug an Adhoc query from potal.
    Is there any tool to debug an Abap program from portal.
    I dont want to use trace,
    Thanks
    GT
    Message was edited by: GT

    Hi GT
    find out the EXACT query u want to launch if it's display
    in BW buisness explorer then change the iview property
    for that query in portal . right click on iview
    BEx Web Application Query String -> assign correct query
    regards,
    kaushal

  • Query Header note of a billing invoice

    Hello,
    In a query for billing invoices I need to add the Header note. I cant find a way to do that. Is there a table or a logical Database that has that item included?
    regards Andreas

    Hi
    So in your query you have to add an additional field and some abap code in order to fill it.
    If you go to header of the text, you can find out the keys: ID, OBJECT, NAME and SPRAS
    The ID and OBJECT can be hardcopyed in your code (because they'll be constants), the NAME is the invoice number (perhaps it can be the client (mant) too, the language should be depend on the language of customer.
    Just as I said, u can use fm READ_TEXT, now the problem will be transfer a text saved in a table (so many rows) to a single string (your additional field for output): that means this field has to be sufficiently long to display the header note, but probably the last part of the note sometimes can be truncated
    Max

  • Content Query Webpart not getting displayed in Mobile view

    Hi,
    I am having a Content Query Webpart in my page.
    In the mobile view it is not getting displayed.
    I read that you can create mobile adapters for the control. But I didnt get how to do it for Content Query Webpart.
    Any help appreciated..

    Is deactivate "Mobile view" a option for you? if then then CQWP will work in same page. You can deactivate that feature from site feature.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Dynamic LOV query will not be displayed

    Hello,
    we created the following record group
    select ename, empno from emp order by 1
    then we created a list of values depending on the record group:
    We added ename to  emp.mgr and empno to null in the LOV
    Then we changed  the emp.emg item to type CHAR and POPUP list
    When we run the form nothing is displayed in the colum of MGR and only 1 record in th tabular form is displayed.
    Please help us
    Regards

    When I save nimber with country code contact name will be displayed,
    and if I store the number without the country code and I get a call it does not show the contact name!!
    This problem exists for all Iranians!

  • BI query not properly displaying in Consumer Portal - Through FPN - RRA

    Hi Everyone,
    we have implemented FPN between EP 7.0 and BI 7.0 . A role with BI reports (iview created using Bex7.0 template) are working fine in BI Portal.
    When its RRA to a users in EP-consumer portal, its not coming properly. I mean it shows some default header/Menu (like New Analysis Open, Save As, Information, Send etc..) in EP but not displaying the details of the report. Other URL iviews are working fine in RRA, just BI query is not coming properly. All pre-requisite for FPN is done properly and SSO configured.
    Appreciate if some one can provide a solution
    Thanks

    Dear Guru,
    I am also facing the same problem.  What you had faced earlier.  Can you explain the detailed solution to resolve this
    problem. BI query not properly displaying in Consumer Portal - Through FPN - RRA.
    If you can explain the solution that will be great.
    With Thanks and Regards,
    Anil Kumar.

  • Header information not getting displayed in the lines

    Hello Everyone
    I have a very basic question - its very simple but not working for me with so many attempts
    My XML structure looks like this . In the RTF , I have header information and then a table for line information looping through G_LINES.
    IN this lines table I need the SHIP_CUSTOMER_ID of the header to be displayed. I have tried all options like <?../SHIP_CUSTOMER_ID?> or <?../G_ORDERS/SHIP_CUSTOMER_ID?> , however nothing seems to be working and I am not getting the field to be displayed. Can someone please help?
    XML structure is as follows:
    <XXSTOL_29251_PICK_TKT>
    <LIST_G_ORDERS>
    <G_ORDERS>
    <CUSTOMER_NUMBER>1411</CUSTOMER_NUMBER>
    <SHIPPING_INSTRUCTIONS1></SHIPPING_INSTRUCTIONS1>
    <SHIP_CUSTOMER_ID>256</SHIP_CUSTOMER_ID>
    <G_LINES>
    </G_LINES>
    <G_LINES>
    </G_LINES>
    </G_ORDERS
    </LIST_G_ORDERS>
    </XXSTOL_29251_PICK_TKT>

    Are you grouping within G_LINES? If so, use ../../SHIP_CUSTOMER_ID
    or send me the xml and RTF template to [email protected] so that I can get a better look at the data structure and try to help.
    Thanks,
    Bipuser

  • Master data is not getting displayed in the Query Designer

    Hi,
    I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

    Hi,
    I have brought the Emp. No. in the Key Field and also have activate the master data again.
    Yet my Query Designer doesn't have the Emp. No.
    I have done a full load for both Master and Transaction.
    Please advice me what the other alternative.
    Thanks

  • A keyfigure is not getting displayed in the DSO and query

    hi friends,
    i have newly developed a DSO with 11 keyfigures and with some 10 characteristics. i created DTP , transformations etc., and i loaded data into it and activated it succesfully.
    now when i select  display data of this DSO one of my keygure is not getting displayed.
    even tht same keyfigure is not appearing in the query  too.
    but when  i check the active table of this dso in SE11 , tht keyfigure is displayed with values.
    could anyone help through this issue.

    Hi
    Even I faced such an issue earlier. I could resolve it simply by readjusting the DSO i.e. to delete the keyfigure and add it in the structure once again, before this you have to delete the data in the DSO. Also, if you have a multiprovider on the DSO make sure that the keyfigure concerned is identified.
    Let us know if this works for you. Thanks.

  • Data not getting displayed in query

    Hi
    I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
    data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
    how do i resolve the issue
    Regards

    solved

  • Header Vendor text is not getting displayed for PO in BBP_PD transaction.

    Hi Experts,
    We are upgrading   SRM 3.0 to SRM 7.0 .In the upgraded  sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs  the Header text field is populated correctly.
    Inputs on this will be very helpful.
    Regards,
    Ravi.K

    Ravi,
    Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
    SG

  • Page Header Not Displaying at Top of Page

    Report Builder 3
    We have a number of reports that include navigation links in the page header. The links use the Bookmarks Action to move the user to a different page. The pages are separated using Page Breaks. Below is an example:
    > Top row is the Page Header.
    > Second section is the Resource Listing & Alerts page.
    > After the first page a rectangle is placed which has Page Break set to Start.
    > After the rectangle comes the start of the "Data Extract" page. The title is in a rectangle with a Bookmark called Page2.
    > Click the link to be forwarded to the Data Extract.
    > Page displays, but the Page Header is not visible because the screen is scrolled down slightly.
    I have not been able to fix this or find a workaround that forces the Page Header to always display at the top. It has been suggested that putting the page break before the bookmark would force this to work, but that is not working.
    Any ideas?     Thank you! Naamkeek

    Hi  Naamkeek,
    Based on my understanding, you add a bookmark link for “Data Extract” in page header, however, when clicking this fields, other page displays without visible page header.
    In Reporting Service, when setting page header in a report, the page header will display in each report page. In your scenario, since you set BreakLocation as Start in PageBreak property, the rectangle could make the page header upper and screen scroll down
    lightly. So please change this property to End. As we tested in our environment, we set BreakLocation as End in PageBreak property for the blank rectangle. Then adding a bookmark link in page header, when we click “Data Extract”, the page header will appear
    on a new page. Please refer to screenshots below:
    Reference:
    Page Headers and Footers (Report Builder and SSRS)
    Best regards,
    Qiuyun Yu

  • Group Header not displaying on conditional suppression

    I have a report that is used to audit controlled medications.  It is grouped by patient and then by medication order ID.  I only want to display the data when the patient has had their medication ordered more than once.  I have a test patient who is not displaying on my report and I have figured out why, but no clue as how to fix it.  Does anyone have any ideas?  The reason why the test patient in question is not displaying is because they have three medication orders of different medications.  Only one of these was ordered more than once.  I believe my suppression formula is only catching the first medication order and since the line is never greater than one on that, his header won't display....  How can I evaluate all of his different medication orders?
    IF distinctcount({ORDER_MED.ORDER_MED_ID}, {PATIENT.PAT_MRN_ID}) >1 then
       if  count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})>1 then
          false
      else
           true
    else if
    count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})<=1 then
            true

    I think I just figured this out....
    I added this to the group selection criteria...
    count({ORDER_AUDIT_TRL.line}, {ORDER_MED.ORDER_MED_ID})>1

  • How to display current date in query header?

    Hi,
    How to display current date in query header?
    I use Query Designer for development.
    Thanks,
    Arun KK

    Hi Arun,
    You can define fixed header lines and footer lines so that when you generate the query list, they can receive current values of certain fields. When you define a header line or a footer line, you must specify a character string of the type &field, where field is the short name of a field.
    This function allows you (for example) to place a sort criterion in the header line.
    You can include the following fields as variables in the headers directly:
    %NAME
    Name of the user processing the query
    %DATE
    Current date
    %TIME
    Current time
    %PAGE
    Current page number (6 characters)
    %P
    Current page number (3 characters)
    These fields can be used in the short forms N,D,T and P. If you want to use these letters as short names for query fields, the field values from the query are used.
    You can also see the link
    [http://help.sap.com/saphelp_nw70/helpdata/EN/6e/dd68721faf11d6b1d500508b6b8b11/frameset.htm]
    Regards,
    NR

Maybe you are looking for