Query in HR report category

Hi All,
My requirement is: I am displaying standrd PNP selection screen. When i select the test run checkbox i should hide the std selection screen. I am able to hide all the fields in the stdandard selection screen but i am getting the empty block. Anybody can suggest me how to approach.
Regards,
Maheedhar

Hi
Are you using LOOP AT SCREEN to hide the fields?
In case the answer's yes, try using the operator CS instead of comparing the fields names. If you just use EQ to compare the name, some labels associated may still be present in the screen, so the block will still show up.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPPERNR' OR
       screen-name CS 'PNPSTAT2' OR
       screen-name CS 'PNPBUKRS' OR
       screen-name CS 'PNPABKRS' OR
       screen-name CS 'PNPXBWBK' OR
       screen-name CS 'PNPXPGPK'.
      screen-active = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Similar Messages

Where do we specify Report category in HR Adhoc query

Hi All.
We have a standard query which shows a selection screen which is different in Production. When I went into the program behind the query and saw the report category, it is different in both the environments.
I am not able to find where do we specify report category in the HR adhoc query.
Can anyone please guide?
Also, how is this possible that a standard report has different report category in Development and production env. ?
Any help would be appreciated.
Aishi

Hi,
There is no place in query, to maintain report category. Whenever an query is created, this table gets updated with default report category depending upon the LDB used. Now if you want to change this default screen to some other screen, then this is the only table where you can change the report category for that query or program.
According to me, you have to maintain this table only, if you want different report category, since there is no place in query where you can do this.
Hope this helps.
Thanks,
Sarika.

Assign Report Category to a SAP Query for PNP LDB

Hello Folks,
How to Assign a Report Category to a SAP Query which is using LDB PNP.
Regards,
Nishanth Kumar

Hi,
SE38 -> Report name -> attributes -> HR Report category
Regards,
Dilek

Select query in a report

Hi!
Is it possible to modify a select query for a report in the following way:
I have created two fields where users input values and operators.
Operators selection is a static list consisting of: =, like , in
Value field is a text field.
The current query is:
SELECT
A,
B,
C
from TABLE
I would like to add:
WHERE
A : P1_OPERATOR : P1_VALUE
but it doesn't work; I get a notification that the operator is incorrect.
It has a defaulft value = and when I set let's say 5 in the value field the whole query should be:
SELECT
A,
B,
C
from TABLE
WHERE
A = 5
Regards!

Hmm, I get the following error:
Updatable report parse error:
ORA-20001: Query must begin with SELECT or WITH
The only difference I see is that your type is SQL Query (PL/SQL function body returning SQL query) while I have SQL Query (updateable report) hardcoded.
I have APEX 4.2.2, I'm not quite sure how to change this...
This is my code:
begin
:P7_QUERY := 'select ROWID,BNK_ID,MSR_PRD_ID,SRC_STM_ID,ID,ID_RETKA,RSP,OZNAKA_RETKA,DATUM_STANJA,OZNAKA_IZVJESCA,OZNAKA_KOMITENTA,MBR_KOMITENTA,KOMITENT_NEREZ,ZUPANIJA,DRZAVA,SEKTOR_NEREZIDENTA,VRSTA_POVEZANOSTI,INSTRUMENT,ISIN,VALUTA,OTKAZNI_ROK,IZVORNO_DOSPIJECE,VRSTA_INDEKSACIJE,VALUTA_INDEKSACIJE,PORTFELJ,UTRZIVOST_KREDITA,ZNACAJKE_KAPITALA,RIZICNA_SKUPINA,UGRADJENI_DERIVAT,ODNOSNA_VARIJABLA,PREDZNAK,IZNOS,IZNOS_ACTUAL,VRSTA_IZNOSA,KOMITENT_PBR,UDJELI_POVEZ_C,AR_ID,AU_ID,ACT_AR_BAL_KN,ACT_AR_BAL,AR_BUSS_ID,MTI_CCY_TP_ID,REG_NO,REG_SFX,JMBG_ID_NO,IP_ID,NO_DYS_OO,TAX_ID_NO,INSTRUMENT_OLD,PREDZNAK_OLD,IZNOS_ACTUAL_OLD,ACT_AR_BAL_KN_OLD,ACT_AR_BAL_OLD,NAPOMENA,NOVI_POSAO_F,LISTA_SUMARNA,LISTA_REKAP,POSTOTAK1,POSTOTAK2,POSTOTAK3,DZS_IDY_CL_ID,HNB_IP_CL_ID,EXG_RT_CRD_RSK_F from DWP.IZV_SLOG_DET
where ' || :P7_X_FC1 || :P7_X_O1 || :P7_X_O1;
return :P7_QUERY;
end;
I have also set Use Generic Column Names (parse query at runtime only) nad P7_QUERY as page item to submit.
Regards,
Ivan

How to add a new field in Query Builder or Report

Hi,
I am writing a report using Oracle 6i query builder and report.
example:
QTY_1 QTY_2 QTY_3
QTY_1 and QTY_2 are table fields and QTY_3 Is not. I need to show the value of (QTY_2-QTY_1) in QTY_3.
I need to create a field QTY_3 which is not in the database table. How do I do that?
Jun

Hi,
Try using formula to return the qty_1 - qty2.
or
select qty_1, qty_2, (qty_1 - qty_2) qty_3
from table;
regards,
CB

See sql query from crystal report without crystal report

see sql query from crystal report without crystal report

Hi,
Depends on datasource type but you could have a look at ODBC trace or if you have access to the SQL Server you could use profiler to monitor the session.
Regards,
Craig
And this will only be of use if you know which Server/Insstance/Database the Report is connecting to...
Please click "Mark As Answer" if my post helped. Tony C.

Cursors are not closed when using Ref Cursor Query in a report ORA-01000

Dear Experts
Oracel database 11g,
developer suite 10.1.2.0.2,
application server 10.1.2.0.2,
Windows xp platform
For a long time, I'm hitting ORA-01000
I have a 2 group report (master and detail) using Ref Cusor query, when this report is run, I found that it opens several cursors (should be only one cursor) for the detail query although it should not, I found that the number of these cursors is equal to the number of master records.
Moreover, after the report is finished, these cursors are not closed, and they are increasing cumulatively each time I run the report, and finally the maximum number of open cursors is exceeded, and thus I get ORA-01000.
I increased the open cursors parameter for the database to an unbeleivable value 30000, but of course it will be exceeded during the session because the cursors are increasing cumulatively.
I Found that this problem is solved when using only one master Ref Cursor Query and create a breake group, the problem is solved also if we use SQL Query instead of Ref Query for the master and detail queries, but for some considerations, I should not use neither breake group nor SQL Query, I have to use REF Cursor queries.
Is this an oracle bug , and how can I overcome ?
Thanks
Edited by: Mostafa Abolaynain on May 6, 2012 9:58 AM

Thank you Inol for your answer, However
Ref Cursor give me felxibility to control the query, for example see the following query :
function QR_1RefCurDS return DEF_CURSORS.JOURHEAD_REFCUR is
temp_JOURHEAD DEF_CURSORS.JOURHEAD_refcur;
          v_from_date DATE;
          v_to_date DATE;
          V_SERIAL_TYPE number;
begin
SELECT SERIAL_TYPE INTO V_SERIAL_TYPE
FROM ACC_VOUCHER_TYPES
where voucher_type='J'
and IDENT_NO=:IDENT
AND COMP_NO=TO_NUMBER(:COMPANY_NO);
     IF :no_date=1 then
               IF V_SERIAL_TYPE =1 THEN
               open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
               FROM JOURHEAD
               WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
               AND IDENT=:IDENT
          AND ((TO_NUMBER(VOCH_NO)=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
          OR (TO_NUMBER(VOCH_NO) BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
          OR (TO_NUMBER(VOCH_NO)<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
          OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
               ORDER BY TO_NUMBER(VOCH_NO);
               ELSE
               open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
               FROM JOURHEAD
               WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
               AND IDENT=:IDENT
          AND ((VOCH_NO=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
          OR (VOCH_NO BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
          OR (VOCH_NO<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
          OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
               ORDER BY VOCH_NO;
               END IF;
     ELSE
               v_from_date:=to_DATE(:from_date);
               v_to_date:=to_DATE(:to_date);
          IF V_SERIAL_TYPE =1 THEN
               open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
               FROM JOURHEAD
               WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
          AND IDENT=:IDENT
               AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
               OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
               OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
               OR (:from_date is null and :to_date is null ))
               ORDER BY VOCH_DATE,TO_NUMBER(VOCH_NO);
          ELSE
               open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
               FROM JOURHEAD
               WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
               AND IDENT=:IDENT
          AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
               OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
               OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
               OR (:from_date is null and :to_date is null ))
               ORDER BY VOCH_DATE,VOCH_NO;
          END IF;
     END IF;
     return temp_JOURHEAD;
end;

Error when opening a BW query with Crystal Reports

Hi all,
I am having problems when opening a BW query with Crystal Reports, the strange thing is that it only happens with
the bo user I have created. If I use a user that already exists and that has SAP_ALL authorization it works.
I don't know if this could be an authorizations issue, but I have created a role with all the authorizations stated in the manual.
The error I am getting is the following:
"An error occurred while generating a new report template. Error in UNKNOWN.RPT file"
Does anyone know what this could be?
Thanks

Well,
I cannot access the system now. But I think it is not an issue of authorization, because I assigned all the good user's role to the bo user,
and even with that, it still don't work.
Thanks

RWI 00200 Error while scheduling the Bex Query based Webi report

Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please advise

Hi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma

Problem with using a Spatial Query in a report region

All: I am trying to create a report region using the below query. The query is syntactically correct and returns 10 rows. I have checked it out in SQL Developer AND in APEX SQL Workshop. It returns rows in 1-2 seconds.
However, after putting the query into a report region, the APEX page locks up when it runs. I've tried masking it in a view, using other functions. I can places the spatial function in the select clause and it works. However, placing the function in the Where clause causes the page to lock up.
Any thoughts?
Thanks,
John
select lastname, address
from changetracking.individuals
where sdo_nn (spatiallocation, MDSYS.SDO_GEOMETRY(2001,8265,MDSYS.SDO_POINT_TYPE(-87.55728,33.137569,null),null,null), 'sdo_batch_size=10') = 'T

QImaging is not officially supported in the Measurement & Automation (MAX) toolkit, though you may find some luck with our free legacy QImaging LabView interface here: http://www.qimaging.com/support/downloads/software/windows/QCamLabViewInstaller221.exe depending on the version lf LabView you're using.If you're looking for something that is actively updated and supported, you may want to get back in touch with Fred at +1.800.874.9789 and ask about our SITK LabView interface as well.
PMQI_Josh,
Yes I've already installed the LabVIEW interface beforehand. Also the version of LabVIEW I'm currently using is 8.6. I'll get in contact with Fred to see if there's a solution to this problem. Thank you.

How to write REF-CURSOR Query in Oracle Reports

Hello Guys!!
I have a form in which you can select regions/divisions/locations etc by the use of check boxes. And the selected values will be inserted into a table, and based on the selected values of the table the report is run.
The issue I have is with the query inside the Oracle reports(attached to this file).
The query works fine until the last two EXISTS conditions.
IF a region exists In the table report_param then it works fine but if there are no divisions in it , then the query returns no values, which is not correct.
Someone has advised me to use a ref-cursor query inside reports tool, which I am not aware off. So, anykind of suggestions or advises are welcome. Please let me know about it as it is very urgent issue for me. Anykind of help would be greatly
appreciated.
Thanks,
Vishal
-------------------------------------------------------Query in Oracle Reports---------------------------------------------------------
select c.key_segment, p.supplier_id,
decode(:in_col_nm, 'BRAND',nvl(p.product_brand,'<Unknown Brand>'), 'PLN',nvl(p.product_legal_name,'<Unknown Legal Name>')) COL_NM,
sum(a.ext_price) sales_dols,
sum(comp_allow_pkg.get_comp_allow_stddiv(a.control_loc_id, a.product_id, a.sold_to_customer_id,
a.doc_dt, a.ext_price, a.units)) cust_reb_dols,
sum(a.units) units,
sum(a.ext_cost) cost_dols
from sales a, key_segment_plns c, product p, rep_wrtr_dw_cust h
where a.doc_dt between :in_start_dt and :in_end_dt
and a.customer_oc = h.control_loc_id
and a.sold_to_customer_id = h.sold_to_cust_id
and a.ship_to_customer_id = h.ship_to_cust_id
and ((:in_dg_cd = 'B' and h.dealer_grower_cd in ('D','G')) or h.dealer_grower_cd = :in_dg_cd)
and a.product_id = p.product_id
and p.product_gl_class_cd = 'CHEM'
and p.product_legal_name = c.product_legal_name
and c.key_segment in ('GLYPHOSATE','PLANT HEALTH/RUST FUNGICIDES','PYRETHROIDS','STROBI FUNGICIDES')--&IN_KEY_SEGMENTS
-- and (:in_oc = 'ALL' or (a.control_loc_id in (select control_loc from control_loc_comb_ocs where control_loc_comb = :in_oc)))
-- SALES DATA FILTERS TO MATCH ACCUM_SALES_DG_MV
and a.sale_type_cd in ('02','08')
and a.document_type_cd in ('I','C','D')
and (substr(a.product_id,-1) in ('0','1') OR nvl(upper(trim(p.product_brand)),'X') = 'TECH FEE')
and a.units <> 0
and a.unit_cost <> 0
and a.unit_price <> 0
-- NEW FILTERS ADDED 9/11/07: LOCATION(BRANCH), BUSINESS TYPE, RSM/ASM/REP
and ((:in_loc = 'ALL') or (nvl(a.warehouse_id,'<blank>') in (SELECT param_value
FROM report_param
WHERE report_id = :IN_REPORT_ID
AND session_id= :IN_SESSION_ID
AND USER_ID = :IN_USER_ID
AND param_name='LOCATION_TYPE')))
and ((:in_uhs_ag = 'ALL') or (:in_uhs_ag = 'NA' and p.product_uhs_ag != 'A') or (p.product_uhs_ag = :in_uhs_ag))
and ((:in_sales_rep = 'ALL') or (nvl(a.territory_id,'<blank>') in (SELECT param_value
FROM report_param
WHERE report_id = :IN_REPORT_ID
AND session_id= :IN_SESSION_ID
AND USER_ID = :IN_USER_ID
AND param_name='SALES_REP_TYPE')))
and EXISTS
(SELECT '1'
FROM locations l, report_param rp
WHERE rp.report_id = :IN_REPORT_ID
AND rp.session_id= :IN_SESSION_ID
AND rp.user_id = :IN_USER_ID
AND rp.param_value = l.region
AND rp.param_name = 'REGION_TYPE'
AND a.warehouse_id = L.ARS_LOCATION)
and EXISTS
(SELECT '1'
FROM locations l, report_param rp
WHERE rp.report_id = :IN_REPORT_ID
AND rp.session_id= :IN_SESSION_ID
AND rp.user_id = :IN_USER_ID
AND rp.param_value = l.region
AND rp.param_name = 'DIVISION_TYPE'
AND a.warehouse_id = L.ARS_LOCATION)
group by c.key_segment, P.supplier_id,
decode(:in_col_nm, 'BRAND',nvl(p.product_brand,'<Unknown Brand>'), 'PLN',nvl(p.product_legal_name,'<Unknown Legal Name>'))

Hi,
I need your help to create a report using Ref-Cursor. please see the below thread
Report using ref cursor or dynamic Sql

Select Query in Crystal Report

Dear all,
I have a report to be developed in which i have to fire more than 2 select quires. I am adding this quires in "Add Command" window, it doesn't give any error but gives output of first query only.
I have tried to use multiple commands in report but the query fields are not having any common field in it so i am not able to link it.
Is there any other way to use more than one query in crystal report?
Thanks in advance.
Ashish Tambe

Dear Charles,
I am willing to develop a report in which i need to select diff data from diff table such as OOPR,ORDR,OINV and many more.based on diff conditions and it may happen that a query can give more than 2-3 records then i need to make summation for that. On the basis of this summation and some more formulas in CR i need to make some conclusions.
This cannot be done in single query. so i need to fire more than one select query.
Regards,
Ashish Tambe

Selection-screen using HR report category

Hi friends,
I have a developed HR report using PNP ldb in which i have used the HR report category to specify my selection-screen.But still my requirment is not getting fullfiled.I require 1)Company Code
2)Payroll Period selection block also.
But even if i dont enter value in this payroll area it should excecute.As of now it throws an error message saying "No valid payroll area specified"
I want to generate report for any month given in other period of the payroll Area wrt company code.

As per your question, remember that, the period will be different for each and every Payroll area.May be same period will behave differenly like weekly, monthly, semi-monthly.. with different payroll area.
So the parameter payroll area will always be mandatory..

Help me about the Report Category !!

In a ABAP report program's "Attributes", we can set the Logical database (eg. in HR, it's PNP) , and then, we can select the "HR report category", for the report screen category setting. After we set the Master Data(infotypes), we will get the report with several pushbuttons in the first line, like Further Selections "Sort order" ...
So, my question is if I want to add some items into the "Sort Order" selection screen, how to do that ?
Thanks a lot
Tom

Hi Tom,
You can create the report category from SE38-> Attributes and then give the LDB name as PNP.
Now click on the HR report category button and proceed creating the new report category by clicking the create button.
The report category name should start with 0* or 7*.
Hope this helps you,
Regards,
Subbu.

Creating new report category in Abap HR

When I try and create a new custom report category, I get a message saying "Choose the key from the allowed namespace". I did use a Z report category (we do have Z report categories that have been created earlier by somebody else). It would be great if somebody could list the steps to create a new report category. By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
I did try using SM30 to create a new entry but got the same message as above.
Thanks.

>
Lakshmi Srinivasan wrote:
By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
> I did try using SM30 to create a new entry but got the same message as above. Thanks.
You can use the Report category HRDKPRNR to meet your reqt.
~Suresh

Query in HR report category

Similar Messages

Maybe you are looking for