Query in selected value for radiogroup
Is it possible to have a query in the p_selected_value of an htmldb_item.radiogroup ?
If yes, how ?
If not, is it possible to always set the first radio button as the selected value ?
thx,
Patrick
Hi Enric,
After the execution of a query using Query designer, after the selection of the variable values, you will get navigation block and the data beside that in Data Analysis tab. In this navigation block, you will find only the restricted values after the variable selection. You will not find the values selected displayed over there. When you select a chracteristic and click on filter button, you will get the values which are restricted only within the data displayed beside that in the output.
If you want to have a look at the variable selection parameter that you have selected in the popup, you should go to Information tab and you can check the same there.
The Navigation Pane Web item shows the navigational state of a data provider. All the characteristics and structures of the data provider are listed. You can alter the navigation status by using drag and drop to drag characteristics or structures to an axis (rows or columns) of the table, or to remove them from the axis. Using drag and drop, you can swap the axes in the navigation area; the table changes accordingly. You can also drag characteristics to the filter pane using drag and drop.
Hope this helps u...
Regards,
KK.
Similar Messages
-
Query to select value for max date from a varchar field containing year and month
I'm having trouble selecting a value from a table that contain a varchar column in YYYY-MM format.
ex.
Emp_id Date Cost
10264 2013-01 5.00
33644 2013-12 84.00
10264 2013-02 12.00
33644 2012-01 680.0
59842 2014-05 57.00
In the sample data above, I would like to be able to select the for each Emp_id by the max date. Ex. For Emp_id 10264, the cost should be 12.00.create table test (Emp_id int, Date varchar(10), Cost decimal (6,2))
insert into test values(
10264, '2013-01', 5.00 ),
(33644, '2013-12', 84.00 ),
(10264, '2013-02', 12.00 ),
(33644, '2012-01', 680.0 ),
(59842, '2014-05', 57.00 )
Select Emp_id,[Date],Cost FROM (
select *,row_number() Over(Partition by Emp_id Order by Cast([Date]+'-1' as Datetime) Desc) rn
from test)
t
WHERE rn=1
drop table test -
Copy 'Favorites' in 'Select Values for Variables' screen
I need to copy a list that I created as a 'Favorite' in the 'Select Values for Variables' screen for Customer to all the other userids so that everyone is using the same list of customers. Can someone tell me the table(s) where these values are stored? Is there a function module or program available that copies 'Favorites'.
It would be nice if you could select if the 'Favorites' you create can be 'Global'.
Thanks.the variant values are stored in RSRPARAMETRIZA. the field content stores in XML format. you can write an ABAP program to read and update it.
Edited by: Ananda Theerthan on May 26, 2010 8:56 PM -
Query - select values for variables form list / Bex 7
Hello together,
when I open a query in the 'Business Explorer Analyzer 7' and I want to select the values for my variables from list, BW shows always the values from history.
Is it possible to change this? I want to see always the single values.
Thanks and best regards.
JörgHello Jörg
The variable values in history are shown in drill down button of variable input box, whereas a button beside it will show a list of values when clicked. These are F4 value help selections.
How is variable created? Please create variable with basic settings as
'single value'.
Regards,
Asit Ramteke -
Morning All,
We are in the process of setting up our SCCM 2012 infrastructure and are experiencing issues with our device collection querys based on AD security groups.
I can see the security groups are being updated per adsgdis.log - i can see the computers that are members of the groups in AD are being recorded in the same log. Issue is when we build the device collection query - click the value button for the string,
only 2 of the 18 AD security groups are displayed. These are 2 AD groups we setup initially to test.
We have since added several additional yet they only appear to populate as user groups in config manager.
The same goes for additional OUs that we have created with AD.
When i click the value button only the initial 10 OUs that were created are populating in the list of applicable OUs.
We have the discovery methods Group Discovery & System Discovery enabled and set to search the parent OU recursively
I'm wondering if there might be an SQL issue with this as it initially worked but stopped...
Additionally we added an OU recently that now appears in in the Values options in the query but the ones added previously and additionally after are not showing up....
Any help is appreciated.
Thanks,
JeffGiven the adsgdis.log lists the new pc and the group it's assigned to it appears the AD group discovery is working.
Have the following excert from the adsgdis.log
INFO: Processing discovered group object with ADsPath = 'LDAP://************.****.COM/CN=Software - Microsoft Project Professional 2010 x64,OU=Software,OU=US-West,DC=*****,DC=com' SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180
(0x1FF4)
INFO: DDR was written for group '*****\Software - Microsoft Project Professional 2010 x64' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\userddrsonly\asg8ud94.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012
7:08:13 AM 8180 (0x1FF4)
INFO: DDR was written for system 'THURMANWIN7VM' - E:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box\adhh8419.DDR at 10/4/2012 7:8:12. SMS_AD_SECURITY_GROUP_DISCOVERY_AGENT 10/4/2012 7:08:13 AM 8180 (0x1FF4)
Here you can see it processes the new members in the Software - Microsoft Project Professional 2010 x64 group and captures Thurmanwin7vm as a member.
I did find some log entries that reference permission issues with objects in the SQL database and have opened a case with MS to get that looked into. Hopefully that will be where the issue lies. -
Not getting BI query variable selection screen for few test users
Hi,
i am having problem when i am executing the reports. i am not getting variable screen for the test users ID's. but i am getting the screen when when 0BI_ALL authorization selected.
i want role based authorization, and not complete authorization.
the parameters in su01 are scl(X) and wlc(X X XX X)
Thanks,Can you please check into Infoobject Maintenance screen in Bex Tab i.e. Query Execution Filter Value Selection. assign "Values from Masterdata Table".
Try again and let me know.
Nagesh Ganisetti. -
Variable Entry - Select Values for plant
Hi All,
I am using a variable(OPLANT) in a report and in select screen I just need Key and Text.But Now I see more details. Ex:key,text,country key,business partners and so on. How do I get this to display just key and text from the select values screen.
I tried Business explorer tab settings and set it to key and text but still no luck.
Any Help please ?
Regards
SRHi,
There is a third check you can do apart from the two checks mentioned by Kiran above.
There is column called 'Order for F4 help' in the 'Attribute' tab of an infoobject.
Here the value against each of the attribute being displayed as of now should be made'00'.
When we make custom infoobjects, it is generally kept as '00' by default.
But since this is a standard SAP infoobject, this might have values greater than 0.
This indicates that these values will appear along with the infoobject during the value
help (in the order of the number mentioned).
It might not be possible for you to change this number. In that case you might have to
create an infoobject (copy of this object but without values against 'order for F4 help') and
use in the flow and query.
- Shruti -
Selected Value for CFSelect and other options too
I have an update form with an "Office" field. For a record, I
query the db and get all the data for the record including the
current office. However, since this is an update/edit form, I want
the current office to display as selected, but want to also include
all the other offices. How Do I do this in a cfselect? I can figure
out how to either display the current office, and no other offices,
or I can display all the offices, but not have the current office
selected. Argh.you have a query that pulls data for current record - let's
call it
REC_QUERY, and let's say the field with the office data is
called... OFFICE
have another query that pulls all offices - let's call it
OFFICE_QUERY
set the QUERY attrib of your cfselect to OFFICE_QUERY
set appropriate DISPLAY and VALUE attributes
set the SELECTED attribute of your cfselect to
#REC_QUERY.OFFICE#
hth
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
Unable to set the selected value for a ADF LOV
Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
SubashiniGyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
OADBTransaction txn = am.getOADBTransaction();
if (testvo != null)
OARow row = (OARow)testvo.first();
if (a.equalsIgnoreCase("Approved"))
row.setAttribute("Testrender", Boolean.FALSE);
else
row.setAttribute("Testrender", Boolean.TRUE);
} But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ? -
INFOSPOKE Selection value for Infoobject 0FISCPER
Hi Experts,
In my project there is a requirement to have the variable selection(To and From values) for 0FISCPER infoObject. Currently last day of every month the selection has to be changed manually to take data out of BW. Now client wants to make it automated. Could any one please suggest the solution . If any one has faced the similar situation then please guide me. It is very urgent.
BW USERHi Karthik,
You can use the standard selection option variable and ask the users to enter the wild character before and after the input value.
For example, if the user enters 'INT' , then report output would show all values which has 'INT'.
However, the users would be seeing all the values in the master data or posted values in the transaction data ( as per the setting ) and not customised values as per your requirement.
Thanks,
Krishnan R. -
Selecting values for query where clause
hi guys, this is possibly a silly question but not sure if i am approaching the solution in the correct mannor.
At the top of my form i have text box which the user fills in various values. These values are then used to refine the query results in the block below. I know i can go into the datablock being queried and set the where clause to equal the value of the text boxes above but i dont feel this is the right place to do it.
If i do it that way when the text box above is blank it returns no reults when infact i want to query everything if the values are left blank. So should i put it in pre query? if so what way should it be done?
Any help would be greatly appreciated.
Thanks.Hello,
If i do it that way when the text box above is blank it returns no reults when infact i want to query everything if the values are left blank. So should i put it in pre query? if so what way should it be done?Not really if you use like below in block's where clause...
db_field_name1=NVL(:form_field_name1,db_field_name1) AND
db_field_name2=NVL(:form_field_name2,db_field_name2)-Ammad -
Puzzle why query returned wrong value for last record in update.
Hi all,
10.2.0.4, Windows 32 bit.
Apply 15% dis.count to related 5 items ( total amount 522 ) sorted by lowest amount first (amount = 1).
Last record ( amount = 200 ) will be the total dis.count amount ( 78.3 ) less applied accumulated dis.count amount ( 48.50 ).
Query runs fine without update clause but wrong result for last record with update.
CREATE TABLE "T1"
"ID" NUMBER NOT NULL ENABLE,
"ITEM_ID" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"AMOUNT" NUMBER(10,2) NOT NULL ENABLE,
"dizcount" NUMBER(10,2)
INSERT INTO T1 ( ID, ITEM_ID, AMOUNT, dizcount ) VALUES ( 65, '101', 1, NULL ) ;
INSERT INTO T1 ( ID, ITEM_ID, AMOUNT, dizcount ) VALUES ( 65, '102', 1, NULL ) ;
INSERT INTO T1 ( ID, ITEM_ID, AMOUNT, dizcount ) VALUES ( 65, '201', 200, NULL ) ;
INSERT INTO T1 ( ID, ITEM_ID, AMOUNT, dizcount ) VALUES ( 65, '215', 155, NULL ) ;
INSERT INTO T1 ( ID, ITEM_ID, AMOUNT, dizcount ) VALUES ( 65, '111', 165, NULL ) ;
UPDATE t1 a
SET a.dizcount =
(SELECT
CASE
WHEN rec_count = row_count
THEN (78.3 - NVL(lag(temp_total,1) over ( order by rec_count) ,0))-- 78.3 is total dizcount amount from 522 * .15
ELSE disc_amt
END amt
FROM
(SELECT id,
item_id,
disc_amt,
rec_count,
row_count,
CASE
WHEN rec_count != row_count -- accumulate dizcount amount except for last record
THEN SUM(disc_amt) over (order by rec_count)
ELSE 0
END temp_total
FROM
(SELECT ID ,
item_id,
amount amt,
ROUND(amount * .15,1) disc_amt, -- dizcount is 15%
row_number () over (order by amount) rec_count,
COUNT ( *) over () row_count
FROM t1
WHERE ID = 65
GROUP BY id,
item_id,
disc_amt,
rec_count,
row_count
)b
WHERE a.item_id = b.item_id
);Regards
Zack
Edited by: Zack.L on Jul 26, 2010 1:26 AMZack.L wrote:
Query runs fine without update clause but wrong result for last record with update.Not sure why but looks like another case in favour of MERGE.
MERGE INTO T1
using (SELECT id, item_id,
CASE
WHEN rec_count = row_count
THEN (78.3 - NVL(lag(temp_total,1) over ( order by rec_count) ,0))-- 78.3 is total dizcount amount from 522 * .15
ELSE disc_amt
END amt
FROM
(SELECT id,
item_id,
disc_amt,
rec_count,
row_count,
CASE
WHEN rec_count != row_count -- accumulate dizcount amount except for last record
THEN SUM(disc_amt) over (order by rec_count)
ELSE 0
END temp_total
FROM
(SELECT ID ,
item_id,
amount amt,
ROUND(amount * .15,1) disc_amt, -- dizcount is 15%
row_number () over (order by amount) rec_count,
COUNT ( *) over () row_count
FROM t1
WHERE ID = 65
GROUP BY id,
item_id,
disc_amt,
rec_count,
row_count
))b
on (t1.id = b.id and t1.item_id = b.item_id)
when matched then update set dizcount = b.amt ;This worked for me. I tested on 11.2 but should work on 10.2.0.4
SQL> select * from t1 order by amount ;
ID ITEM_ID AMOUNT DIZCOUNT
65 101 1 .2
65 102 1 .2
65 215 155 23.3
65 111 165 24.8
65 201 200 29.8p.s. BTW, not sure if you want the column names in different cases, but your script, as it is, gave me an error (on 11.2) -
Query to select values that match multiple ranges
Hi,
Oracle 10g.
I have a table POINTS(ID INTEGER, CLASS VARCHAR2(15), CUMUL NUMBER(2,1), ...).
In my application (APEX application), I show a list of point classes, order by cumul.
SELECT CLASS FROM POINTS ORDER BY CUMUL;Then user can choose some range of point classes (CUMUL is not shown in the application, it is just for the example) :
CUMUL CLASS
12.2 31458 <-
13.4 5S84 <- range 1
13.6 78PPH <-
15.0 3R594 <-
15.1 ZB452
15.5 54IO
17.6 21GFD
19.2 A54VV <-
19.9 IC112 <- range 2
20.8 158RC9 <-
21.3 G4G5
23.0 V22 <- range 3For each range, I store only first and last classes selected by a user, in a table USER_SELECTION(ID, ID_USER, FROM_CLASS, TO_CLASS), so using the example above it would give :
ID ID_USER FROM_CLASS TO_CLASS
1 12 31458 3R594
2 12 A54VV 158RC9
3 12 V22 V22
... ... ... ...The problem is that in a query, I need to return all points selected by a user, and I really don't know how to achieve that without too much work... :
SELECT *
FROM POINTS
WHERE USER_ID=12
AND CLASS IN ( *???* );
Any help would be much appreciated.
Yann.It's not exactly clear what data is in what tables etc. but perhaps something like this...
select user_selection.id, points.*
from points, user_selection
where user_selection.user_id = 12
and points.cumul between
(select cumul from points where class = user_selection.class1)
and
(select cumul from points where class = user_selection.class2)
order by user_select.id, points.cumul -
Query to select values greater than, where AS clause is used
Oracle 10g
Requesting your help in writing the query correctly.
I have the following 2 tables. The AddProjectPhase and AddProject tables. It is many to many relationship. Each project can have a predefined set of 4 different phases under it. Each phase has a start date and an end date. I am writing a report to get the phases which have a duration greater than, for example, 3 months.
The query below is working fine to just display the list of all the phases along with the duration of each phase. I am not able to modify it to select the phases which have a duration, for example, 3 or more months.
CREATE TABLE "ADDPROJECT"
( "VERSIONNO" NUMBER(*,0),
"PROJID" VARCHAR2(20),
"PROJNAME" VARCHAR2(60),
"PROJSTARTDATE" DATE,
"PROJSTATUS" VARCHAR2(20),
"PROJENDDATE" DATE,
"PROJENDTYPE" VARCHAR2(20),
"PROJENDREASON" VARCHAR2(1000),
"UCPROJECTMANAGER" VARCHAR2(20),
"FROMDATE" DATE,
"TODATE" DATE,
"SRCHFIELD" VARCHAR2(20),
"OPERATOR" VARCHAR2(20),
"PARENTPROJID" VARCHAR2(20),
"PROJHIDDENDATE" VARCHAR2(20),
CONSTRAINT "PK_B36" PRIMARY KEY ("PROJID", "PROJHIDDENDATE") ENABLE
CREATE TABLE "ADDPROJECTPHASE"
( "VERSIONNO" NUMBER(*,0),
"PROJPHASEID" NUMBER(9,0),
"PHASESTARTDATE" DATE,
"PHASEENDDATE" DATE,
"RRDATE" DATE,
"PHASENAME" VARCHAR2(30),
"PROJPHASESTATUS" VARCHAR2(20),
"PROJID" VARCHAR2(20),
"OPERATOR" VARCHAR2(20),
"FROMDATE" DATE,
"TODATE" DATE,
"SRCHFIELD" VARCHAR2(20),
"REVIEWCOMMENTS" VARCHAR2(1000),
"PROJHIDDENDATE" VARCHAR2(20),
"ISUEVALUATION" NUMBER(1,0),
"SOLUTIONINGTEAMINVOLVEMENT" NUMBER(1,0),
"ISUNAME" VARCHAR2(20),
CONSTRAINT "PK_A63" PRIMARY KEY ("PROJPHASEID") ENABLE
)Below is the query to display the list of all the phases along with the duration of each phase which is working fine.
SELECT pp.phaseName "phasename",
pp.phaseStartDate "phaseStartDate",
pp.phaseEndDate "phaseEndDate",
pp.projPhaseStatus "projPhaseStatus",
ap.projID "projID",
ap.projName "projName",
ap.projHiddenDate "projHiddenDate",
ap.projStartDate "projStartDate",
CASE
WHEN pp.phaseEndDate IS NOT NULL
THEN MONTHS_BETWEEN(1+pp.phaseEndDate,pp.phaseStartDate)
WHEN pp.phaseEndDate IS NULL
THEN MONTHS_BETWEEN(1+sysDate,pp.phaseStartDate)
ELSE null
END "phaseMonths"
FROM AddProjectPhase pp, AddProject ap
WHERE ap.projID = pp.projID
AND ap.projHiddenDate = pp.projHiddenDate
ORDER BY ap.projIDHowever the modified query shown below to select all the phases greater than, for example, 3 months, is resulting in
ORA-00904: "PHASEMONTHS": invalid identifier SELECT pp.phaseName, pp.phaseStartDate, pp.phaseEndDate
FROM AddProjectPhase pp, AddProject ap
WHERE ap.projID = pp.projID
AND ap.projHiddenDate = pp.projHiddenDate
AND PhaseMonths IN
(SELECT
(CASE
WHEN pp.phaseEndDate IS NOT NULL
THEN MONTHS_BETWEEN(1+pp.phaseEndDate,pp.phaseStartDate)
WHEN pp.phaseEndDate IS NULL
THEN MONTHS_BETWEEN(1+sysDate,pp.phaseStartDate)
ELSE null
END) AS PhaseMonths
FROM AddProjectPhase pp, AddProject ap
WHERE ap.projID = pp.projID
AND ap.projHiddenDate = pp.projHiddenDate)
ORDER BY ap.projIDLooking for this?
select *
from (
SELECT pp.phaseName "phasename"
, pp.phaseStartDate "phaseStartDate"
, pp.phaseEndDate "phaseEndDate"
, pp.projPhaseStatus "projPhaseStatus"
, ap.projID "projID"
, ap.projName "projName"
, ap.projHiddenDate "projHiddenDate"
, ap.projStartDate "projStartDate"
, CASE WHEN pp.phaseEndDate IS NOT NULL THEN MONTHS_BETWEEN(1+pp.phaseEndDate,pp.phaseStartDate)
WHEN pp.phaseEndDate IS NULL THEN MONTHS_BETWEEN(1+sysDate,pp.phaseStartDate)
ELSE null
END "phaseMonths"
FROM AddProjectPhase pp, AddProject ap
WHERE ap.projID = pp.projID
AND ap.projHiddenDate = pp.projHiddenDate
ORDER
BY ap.projID
where "phaseMonths" >= 3 -
Error while selecting values for f4 help.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: CCG for setnode-SETNAME.
SELECTION-SCREEN END OF BLOCK B1.
At Selection-screen on value-request for ccg-low.
Select setname from setnode into corresponding fields of table i_setnode where setclass = '0101'.
Sort i_setnode by setname.
Delete adjacent duplicates from i_setnode.
Perform F4_Help_ccg_low.
FORM F4_Help_ccg_low .
data: prog like sy-repid , scrno like sy-dynnr.
prog = sy-repid.
scrno = sy-dynnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'i_setnode-setname'
DYNPPROG = prog
DYNPNR = scrno
DYNPROFIELD = 'CCG-low'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = i_setnode
ENDFORM.
The field which i select from the f4 help is not being diaplsyed on select-option. I have attached the code written above. Please check and if i have done anything pls correct me.
Regards,
Phyrose.Hi
check with this code
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
<b>Reward if usefull</b>
Maybe you are looking for
-
How to filter View Objects on Main Page - Unbounded Task Flow
Hi All, Version: 11.1.1.4 I have a scenario where I am trying to filter the Employee information by EmployeeID and show their related Items. I can do this if I encapsulate Employee and / or Items in bounded task flows and expose their view Criteria i
-
Error while updating from 10.8.4 to 10.8.5 on MacBook Pro
Hi, I wanted to update from 10.8.4 to 10.8.5 as offered by App Store. During installation an error message box showd up saying just "An unexspected error occured" (Translated from german). After hitting "ok", the update disappeared from the AppStore
-
File Failed to be Converted using ADobe ExportPDF online date - 6/25/2013
I am getting this error message. I have tryied the reader, and the web but it doesn't work. could you please help?! Thanks!
-
Gahh, when can I buy an iPhone in Hong Kong??
Ahh... always out of stock. I wonder if I could buy one on the online store in Canada and let them ship it to my house in HK... lol
-
Malware and/or Phishing Incident???
In a moment of "not thinking clearly," yesterday on my iPad I was reading an email from "my bank" that indicated a possible fraudulent charge. I clicked on the embedded html link within the body of the email message and it launched Safari which then