Query in Snmp.acl file

I am using JDK1.5 for monitoring the JVM Thread & Memory details. I have enabled the SNMP monitoring with the following configuration in snmp.acl file
acl = {
communities = public, private
access = read-only
managers = gnanasekar
But, when I query the device from "gnanasekar" machine, the request is getting timed out. If I change it to "localhost" then it is working.
Do I have to configure anything else?
Thanks

Ok, managed to solve my own question, more or less. FYI:
I read the template file properly and used the "netmask prefix notation" as it suggest, which is apparently CIDR notation. Put simply, I specified "192.0.0.0/8" for the managers and this seems to allow connections from any IP address of the form 192.X.X.X which is fine for my purposes.
I think specifying "192.168.1.1/24" would allow connections from any IP address of the form 192.168.1.X - searching the web for CIDR notation explains.....
Regards,
Adrian
Edited by: AdrianFitz on 21-Jul-2010 19:41 fixed formatting

Similar Messages

How do we add trap-recipients to the acl file?

How do we add trap-recipients to the acl file?
Any examples.

Here's some documentation I am working on for my place of work - hope this helps:
There are two Sun-provided configuration files of note that must be maintained and provided to the SNMP agent program as command line arguments when it runs. They are:
X.acl (subagent access control file, where X is your agent name)
X.reg (subagent registration file, where X is your agent name)
Note: For more information on either of these files, read the Solstice Enterprise Agents User Guide found on the Sun website, but don't expect too much.
The reg file specifies the subagent name and OID tree it is responsible for, among other things.
The acl file contains a list of communities that will be sent traps. This file will need to be periodically updated with the IP addresses of any entity that wants to receive traps from the X subagent. The file looks in part like this:
acl = {
communities = public, private
access = read-write
managers = dv, localhost
trap = {
trap-community = SNMP-trap
hosts = dv, localhost
enterprise="Xenterprise"
trap-num = 1-5
Where "dv" and "localhost" are configured in the /etc/hosts file as IP addresses to send traps to and "Xenterprise" is an enterprise that must be registered EXACTLY as is shown in the /etc/snmp/conf/enterprises.oid file. (Note: Some of the enterprises in this file have spaces within their name. This WILL NOT WORK. So if for some reason, an enterprise you were going to use is "MY Enterprise" you must changes this file because your MIB will not compile with an enterprise with spaces in the TRAP-TYPE declaration.
So, to add a new community, add an argument to the "managers" and "hosts" line in the .acl file and ensure that this reference has its IP address listed in the /etc/hosts file.
Furthermore, in /etc/snmp/conf/snmpdx.acl a comparable entry needs to be added as well. The snmpdx executable is the master agent that the subagent communicates with. It also has an entry in its .acl file as follows:
trap = {
trap-community = SNMP-trap
hosts = dv, localhost
enterprise="Xenterprise"
trap-num = 1-5

Extract data from Query to a Flat File - scheduling in the background

Hi All,
We need to extract data from a query to a flat file periodically, but each time 10 separate executions based on 10 profit centers, to get the separate files.
So, we have PC1, PC2, ... PC10 Profit centeres.
We have Query1, with profit center variable.
We have created 10 variants for Query1 so that we can execute for 10 profit centers.
Now, we have used RSCRM_BAPI to execute the Query1 and write to a flat file. Now we are having a problem in getting this feature used to execute the query automatically for 10 different varaints.
Thanks in advance,
_ Shashi

Shashi,
You can try using Information Broadcasting or Reporting Agent. You can schedule this in Information Broadcasting.
check this link for Information Broadcasting... <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm</a>
Nagesh Ganisetti.

How can i use the ACL file to control the access from the other website?

Hello all~
My Sun one is 6.1 sp3 on Windows 2003 SE, and I am try to use the ACL file to control the access.
My ACL file is below:
version 3.0;
acl "path=my_path_on_HD";
deny absolute (all)
(user = "anyone") and
(dns = "*.my_site.com");
deny absolute (all)
(user = "anyone") and
(dns = "*.other_site.net");
Once I add the "deny", anyone include my site is decline for vist the path specify in the ACL file. But if remove the "deny", everyone include other one's website can access the file.
Can anybody tell me how to make it work?

I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object>

How to display the out put of the sql query in a text file using forms

I want to display the out put of the sql query in a text file using forms 6.0.Same could be done using spool command in sqlplus but i want it using forms....Fiaz

Have a look at the text_io package:
http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=3&vtTopicFile=f1_help/oraini/c_text_io.html&vtTopicId=
cheers

How to save query result on the file server as excel file?

Hi everyone,
I need to save the the query result on the file server as excel file.
Do you have any idees how can I do it?
Regards
Erwin

i dont think you can save as excel file but you can save it as CSV use APD or RSCRM BAPI for this

Steps to save a Query/Report as Excel file in Share folder

Hi,
I have a requirement where i need to schedule a BI report automatically on a daily basis and save it in a Sharepoint folder as a excel file. I have gone through the Forums but didnt get a clear idea on how to proceed this with. I read about RSCRM_BAPI transaction but i hope we need to do this manually to save the file each time. Also, in Broadcaster there are options only to send Email & save in Portal.
So, if anybody have idea on saving a Query/Report as excel file in a Share folder automatically, kindly help me in suggesting the steps to do this activity.
Regards,
Murali

Hi
1. Create Three Floders in AL11 i.e. in Apllication Server. Eg Name it F1, F2 and F3.
2. First dump the .csv files into F1. (Name xyz.csv).
3. Then using UNIX/WINDOWS (depends on your OS) script , first check the file is there are not in F1, if yes then rename the file with date and time or date and transfer the files from F1 to F2 i.e xyz06032010.csv.
4. Then Create a small ABAP program to check the file in F2, if it is there then Trigger the Event, and using that event you execute teh PC.
5. Then using UNIX/WINDOWS (depends on your OS) script , transfer the files from F2 to F3 i.e xyz06032010.csv
6. Next day morning F1 and F2 are empty and F3 is having the backup files.
So use this method, I used the similar logic and it is working fine.
Timinings are importent i.e what time you need to dump the fule in F1 and what time you need to run UNIX/WINDOWS (depends on your OS) script , transfer the files from F1 to F2 and what time UNIX/WINDOWS (depends on your OS) script , transfer the files from F2 to F3.
OR
1. Create Two Floders in AL11 i.e. in Apllication Server. Eg Name it F1 and F2
2. First dump the .csv files into F1. (Name xyz.csv)
3. Then load the data using InfoPackage, through PC.
4. At the end of the load Attach a simple Program to Move the xyz.csv file from F1 to F2.
5. So next day the file will come to F1 and the it will load and at the end it will move to F2.
Else you can use simple one or two lines of UNIX/WINDOWS (depends on your OS) script to move the file from F1 to F2 , once you load is over.
While moving the file from F1 to F2 you can append the date at the end of the file and then move to F2, it is use full for future reference.
See Blogs and Article, similar logic...
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
How to transfer the Data from SAP-System to Non-SAP system without additional Cost/License
/people/surendrakumarreddy.koduru/blog/2009/03/11/how-to-transfer-the-data-from-sap-system-to-non-sap-system-without-additional-costlicense
To Check the Files/Reports in Application Server and Trigger Mail Alerts.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4096bf2d-bcea-2b10-4ab4-e0683830d9b2&overridelayout=true
Thanks
Reddy
Edited by: Surendra Reddy on Mar 12, 2010 6:41 AM

WCF Service and Sharepoint Form library : How i can read a access a form libray and query a item from file name and read form xml in WCF service ?

WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
Ahsan Ranjha

Hi,
In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
SharePoint 2013 REST API
http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
SharePoint 2013 Client Object Model
http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
Best regards
Patrick Liang
TechNet Community Support

Query related to .tpz files

Hi,
I am having query related to .tpz files.
I am having XI Development server on AIX. My XI Prd server will be on windows NT .
<b>Can i transport .tpz file from development server to production server as both the servers are on different platforms.</b>
Regards
Prabhat

I think it should not be a problem....
One of the reasoning is that SAP standard content for XI also comes as tpz files...
best way to know is to just try it out...
here is the link from sap help on transporting objects..
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Thanks,
Renjith

Export query result to txt file

Hello,
I'm trying to export a query result to txt file but I facing some problems.
I'm using the comand below:
set echo off newpage 0 space 0 pagesize 0 feed off head off trimspool on
set colsep ,
spool C:\estados.txt
select id_estado,cod_estado,nme_estado from tb_estado;
spool off
First problem: My select statement is being writen on my estados.txt
Second problem: The results are being writen with a lot of blank spaces in start of line, for example, instead of write "1,AC,Acre" the line is write as " 1,AC,Acre".
Third problem: The "spool off" statement is being written on my estados.txt
How could I solve it?
Thanks

1. Works here - what version of SQL*PLUS are you using?
2. If you want to prevent spaces, you have to write your SELECT like this:
select id_estado || ',' || cod_estado || ',' || nme_estado from tb_estado;Note: not tested.
3. See 1.
C.

Query Output to CSV file

Hi,
I am trying to export a Query result to CSV in comma-delimited tab format.
In SBO it is allowing to save the query results as CSV file; but when I opened
it is in 'Text Unicode' filetype.
Is there anyway save it directly as CSV in comma-delimited tab format.
Thanks Regards
Shiva

Hi Gordon,
Sorry could not reply soon.
Its a smiple query
"SELECT ItemCode, ItemName, ItmsGrpNam,
LeadTime, VATLiable, CardCode"
The things is we might make some changes to it based on customer requirement. But the fact is no matter what query, I have no problem with query. It is while saving it is making a 'tab-delimited' file rather than 'comma-delimited file'. User has to manually open it and save it as CSV file.
Regards
Shiva

Write the output of a query in ODI to file

Hi Friends,
I am using ODI 11g.
In ODI I want to write the output of the below query to a unix file.
SELECT 'H'|| rpad('SB9KT.KTPRTO.EBSDATA.D0000000','30',' ')|| rpad(to_char(sysdate, 'YYYYMMDDHHMMSS'), 16, ' ')
FROM dual;
Please suggest any inputs.
Thanks,
Lony

lony wrote:
Hi Friends,
I am using ODI 11g.
In ODI I want to write the output of the below query to a unix file.
SELECT 'H'|| rpad('SB9KT.KTPRTO.EBSDATA.D0000000','30',' ')|| rpad(to_char(sysdate, 'YYYYMMDDHHMMSS'), 16, ' ')
FROM dual;
Use OdiSqlUnload tool to write the output of the sql query to a file
Please suggest any inputs.
Thanks,
Lony

How to write the output of an SQL query to a text file?

I am using Oracle 11g and SQL plus.
I have a large table called rating.
Whenever I do
SQL> select * from rating;
The output goes much beyond what the SQL Plus screen can show. I want to therefore store the output of this query into a text file.
How can this be done? Please help. Thanks.

SQL> SPOOL results.txt
SQL> select * from rating;
SQL> SPOOL OFF

Select query results into excel file

Hi,
I want to put the results of a select query in an csv file(tab separated columns). I dont want to spool command for this . Is there any other method to do this.
Thanks

To get data from oracle to excel to use odbc driver to achive this.

Saving query result to a file

Hi,
I have a sql*developer version 1.5 but i am getting a problem while saving query result to a file. When i click on "script output "-> "file icon" nothing is showing.
Can anyboby guide me whether its a bug or some other settings are required.
I have oracle 10.2.0.3 working on linux.
Thanks & regards
Girish

I am getting the same thing and as far as I know it is a bug.
As a workaround, you can either copy the contents of the script output or run the query as a statement (F9) instead of as a script (F5) and export the query results from the results tab.

Query in Snmp.acl file

Similar Messages

Maybe you are looking for