Query Interrupts w/ Oracle

Hi,
Any ideas on clean methods for interrupting long running queries to
Oracle. Are any methods included in R3 for this.
Thanks,
Will

Jennifer Medeiros@SUNLIFE
09-18-97 01:20 PM
Question:
Are you using OCI (Oracle Call Interface) to access Oracle? If so, you
want to look up two calls:
OCAN
-- Cancels current call
OBREAK
-- Breaks current call
Of course, you still need to set some kind of alarm (to know when a call is
going on "too long")
If you're not using OCI, (if you're using embedded SQL to access Oracle)
this won't work.
Good Luck
Jennifer Medeiros
CSC Consulting
One Newton Executive Park
Newton Lower Falls, MA 02162 USA
wshea @ uswest.com
09/09/97 01:40 PM
Please respond to [email protected]
To: forte-users @ sagesoln.com
cc: (bcc: Jennifer Medeiros/Group/CNO/SunLife)
Subject: Query Interrupts w/ Oracle
Hi,
Any ideas on clean methods for interrupting long running queries to
Oracle. Are any methods included in R3 for this.
Thanks,
Will

Similar Messages

Query works in Oracle Client but not JDBC

The query is as follows:
SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '15-JAN-01' and '15-JAN-03';When I run this query in the Oracle client (SQL+) it tells me that THE_COUNT is 4 which is correct but when I use the following JDBC code I get THE_COUNT is 0 which is incorrect.
public ResultSet viewTotalSentOrdersByDate()
throws SQLException, Exception {
      String beginDate = "15-JAN-01";
      String endDate = "15-JAN-03";
      ResultSet rs = null;
    try {
      String queryString = ("SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '" + beginDate + "' and '" + endDate + "'");
      System.out.println(queryString);
      Statement stmt = con.createStatement();
      rs = stmt.executeQuery(queryString);
      while(rs.next()) {
       System.out.println(rs.getString("THE_COUNT"))
    } catch (SQLException sqle) {
      error = "SQLException: Could not execute the query.";
      throw new SQLException(error);
    } catch (Exception e) {
      error = "An exception occured.";
      throw new Exception(error);
    return rs;
}Thanks for the help
Zac

The query is as follows:
SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '15-JAN-01' and '15-JAN-03';When I run this query in the Oracle client (SQL+) it tells me that THE_COUNT is 4 which is correct but when I use the following JDBC code I get THE_COUNT is 0 which is incorrect.
public ResultSet viewTotalSentOrdersByDate()
throws SQLException, Exception {
String beginDate = "15-JAN-01";
String endDate = "15-JAN-03";
ResultSet rs = null;
try {
String queryString = ("SELECT COUNT(*) THE_COUNT FROM sentorders WHERE ordersentdate BETWEEN '" + beginDate + "' and '" + endDate + "'");
System.out.println(queryString);
Statement stmt = con.createStatement();
rs = stmt.executeQuery(queryString);
while(rs.next()) {
System.out.println(rs.getString("THE_COUNT"))
} catch (SQLException sqle) {
error = "SQLException: Could not execute the query.";
throw new SQLException(error);
} catch (Exception e) {
error = "An exception occured.";
throw new Exception(error);
return rs;
}Thanks for the help
Zac

Query off of Oracle using WinSql - Need help with query

I am trying to query off of Oracle using program WinSql.
I have a table(tticpr200110) that has the following sample data:
ITEM     CODE     T$AMNT
23500076 ACL     .0049
23500076 APM     0
23500076 APO     .0093
23500076 EXP     .0001
23500076 RES     .0072
and what I want it to look like is:
ITEM     ACL     APM     APO     EXP     RES
23500076     0.0049     0     0.0093     0.0001     0.0072
(actually I need the last 2 columns added together to be MATL-but can deal with that down the road).
Seems simple enough, but I don't know to put into the columns.
Any help would be GREATLY appreciated as soon as possible would be even better.

My table - tticpr200110 when it runs I get the following sample data for part number 23500076:
The first coloumn ITEM is the part number.
The second column CODE is 1 of 5 different cost codes
The third column is the cost for that code for that part.
ITEM CODE AMNT
23500076 ACL 0.0049
23500076 APM 0.0000
23500076 APO 0.0093
23500076 EXP 0.0001
23500076 RES 0.0072
I want to make a query that makes the data look like this:
ITEM ACL APM APO EXP RES
23500076 0.0049 0.0000 0.0093 0.0001 0.0072
(similar to a pivot table in excel or acess)
I hope this helps better.
Thanks!

Query based on Oracle and MS Access connections

I hope this is in the correct spot.
I am using Oracle SQL Developer to extract data from some Read Only tables in Oracle.
What I would like to do it have a list of numbers in a MS Access database to select the same number from Oracle tables, then export the data out to Access or Excel. There may be several thousand numbers at a time.
I asked if they would give me one table with one column in Oracle I could read/write to but the answer was no.
I have my connection strings working to both the Oracle tables and to the Access database but i can not figure out how to build a query using both tables.
If I build a query to the Access table can I use that query somehow in the query of the Oracle table?
Thanks
Steve

Not real sure if this is doable or would help, but perhaps you can load the access table into an Oracle Global Temporary Table? See http://www.oracle-base.com/articles/8i/TemporaryTables.php (and google on it). I think I'm assuming your 11 hour query had something to do with shovelling a bucketload of data to the access side, perhaps if you could show us the plan on the Oracle side that access was generating to get the Oracle data there might be a different answer.
Oftentimes cross-db tools won't use Oracle features like analytics, or do slow-by-slow row processing where a short procedure could do things within the Oracle sql engine and return data in larger arrays.
Sometimes mass data cleansings benefit from using server side tools outside of the db. Do you have the data from before it was loaded to Oracle? What Oracle platform are you on?

Query Builder in Oracle 9i

We use the tool Query Builder in our Oracle BD version 8.0.5.1. We have a development version of Oracle 9i and I don't see anything like Query Builder. What product is replacing Query Builer in Oracle 9i ??
THANKS

Version 1.5.1 Build MAIN-5440 for Mac OS X
Update: It is actually selecting the columns. If I click a column and look in the Show SQL and View Results it's there but it's just not displaying it on the select columns screen.
This must be a bug?

Sub-query problem on Oracle 10g

The following query works on Oracle 10.2.0.1.0 on windows,but doesn't work on Oracle 10.2.0.2.0 on Linux.
Error report: SQL Error: ORA-00904: "T"."AUDIT_USECS": invalid identifier 00904. 00000 - "%s: invalid identifier"
It works after i remove the sub-query. I found that if use fields of T in sub-query,then error occurs. Is it saying that sub-query can't access the fields in main query?
What's the problem?
Is there any grammar erros?If so,what's the right likes?
Thanks!
CREATE TABLE AUDITHISTORY(
CASENUM numeric(20, 0) NOT NULL,
AUDIT_DATE date NOT NULL,
USER_NAME varchar(255) NULL,
AUDIT_USECS numeric(6, 0) NOT NULL,
TYPE_ID INT NOT NULL )
Query:
SELECT T.CASENUM,
T.USER_NAME,
T.AUDIT_DATE AS STARTED,
(SELECT *
FROM (SELECT S.AUDIT_DATE
FROM AUDITHISTORY S
WHERE S.CASENUM=T.CASENUM AND TYPE_ID=2
AND S.USER_NAME=T.USER_NAME
AND (S.AUDIT_DATE > T.AUDIT_DATE OR (S.AUDIT_DATE = T.AUDIT_DATE AND S.AUDIT_USECS > T.AUDIT_USECS))
ORDER BY S.AUDIT_DATE ASC,S.AUDIT_USECS ASC
) WHERE rownum <= 1) AS ENDED
FROM AUDITHISTORY T WHERE TYPE_ID=1
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for Linux: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production

Try this way:
SQL> select * from AUDITHISTORY;
   CASENUM AUDIT_DAT USER_NAME            AUDIT_USECS    TYPE_ID
        10 12-MAR-10 USER                         100          1
        10 14-MAR-10 USER                         100          2
        10 16-MAR-10 USER                         100          2
SQL> SELECT T.CASENUM,
2 T.USER_NAME,
3 T.AUDIT_DATE AS STARTED,
4 (SELECT max(S.AUDIT_DATE) keep (dense_rank first order by S.AUDIT_DATE ASC,S.AUDIT_USECS ASC)
5   from AUDITHISTORY S WHERE S.CASENUM=T.CASENUM AND TYPE_ID=2
6 AND S.USER_NAME=T.USER_NAME
7 AND (S.AUDIT_DATE > T.AUDIT_DATE OR
8       (S.AUDIT_DATE = T.AUDIT_DATE AND S.AUDIT_USECS > T.AUDIT_USECS))
9 ) as ended
10 FROM AUDITHISTORY T WHERE TYPE_ID=1;
   CASENUM USER_NAME            STARTED   ENDED
        10 USER                 12-MAR-10 14-MAR-10Max
http://oracleitalia.wordpress.com

Create a query builder in oracle Apex

Hi
We have a request to create a query builder in oracle Apex particularly.But it provide the application builder and Utilities when we create the apex workspace.My question is any possibility are to make the application builder and utilizes as invisible
regards
apexuser

hi scott,
we no need to buid a report.we want generate a sql query using GUI drag and drop query builder.
our suggestion is provide synonym for all objects and give to clinet,but in apex query builder only show view and table...
it not show synonym thats the problem..
simply we want oracle query browser.just want build a query.through synonym schema.
we cerate a oracle user and provide synonym for live tables.then we provide the synonym user to client place,so they want build a query simpl.
they dont have sql knowledge.
regards
apexuser

Giving Query Interrupted Error on Spectrum screen

Hello All,
I want to do a screen capture for Spectrum analyzer ESA series. I am getting screen-shot but always same not the current one. If and only if i dont use MMEMEL function after the binary data read sub vi i get screen-shot but not the current one. And if i use Function MMEMEL then i get blank screen-shot. And on the screen of Spectrum i always get message that QUERY INTERRUPTED and at the error output i get warning. I dont know whats making these things to happened... I will be very glad if anyone help me with this...
thanks in advance...
Pals
Solved!
Go to Solution.
Attachments:
PSA Screen Capture via GPIB1.vi ‏35 KB
VISA Read Binary Block Data to File1.vi ‏12 KB

Hi Pals,
I think this problem is more related to your your spectrum analyzer then to LabVIEW. Is there any documentation or sample code from the vendor how to get a screenshot? Or do they offer any LabVIEW driver VI's on their homepage?
There is probably one thing you could try to change in your code, you can use a delay betwenn the VISA Writes, maybe the analyzer needs some time time to procees a command
Kind regards
Carsten

Does oracle 10gr2 has a visual query builder like oracle Express ?

Hi
Thank you for reading my post
does oracle 10gr2 provide a visual query builder like oracle express ?
Thanks

SQL Developer<br>
<br>
Nicolas.

How to convert SQL Server hierarchical query (CTE) to Oracle?

How to convert SQL Server hierarchical query (CTE) to Oracle?
WITH cte (col1, col2) AS
SELECT col1, col2
FROM dbo.[tb1]
WHERE col1 = 12
UNION ALL
SELECT c.col1, c.col2
FROM dbo.[tb1] AS c INNER JOIN cte AS p ON c.col2 = p.col1
DELETE a
FROM dbo.[tb1] AS a INNER JOIN cte AS b
ON a.col1 = b.col1

See: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2129904
Ah, just spotted it's a delete statement - you won't be able to do it using subquery factoring in Oracle.
I had a go at trying to convert for you, but notice that you reference the cte from inside the cte... I can only assume you have a table called cte too...
DELETE FROM dbo.tb1
WHERE col1 = 12
OR col2 IN (SELECT col1 FROM cte)
Edited by: Boneist on 22-Jun-2009 09:19

SAP query load to Oracle

Hi,
I'm looking for the best way to automate the results of an SAP query (Quickviewer) to Oracle. The query would run nightly. I searched all SND forums but did not find much. I also looked at the SAP application help for Quickviewer.
Regards,
John

David,
Just an FYI the error message that you have found is not connected to your BLS transaction but rather the default IDoc listener trying to connect to something that doesn't exist. This listener will automatically start each time xMII starts, as a result you can set it up to connect to an RFC destination or delete the default configuration and it will go away.
Now onto your issue; How many Production Orders are being returned from the BAPI? How are you loading each of them into Oracle? How much memory is allocated to ServletExec vs. How much is available on the machine? By default xMII will limit all SQL/Tag queries to their <b>RowCount</b> with a max at 250k rows but this does not apply to the JCo call.
My suggestion here is to look for the other error message that pertains to your transaction which may reside in the ServletExec logs and not xMII, they can be found on your xMII machine here: http://localhost/servletexec/admin/login.jsp
Hope this helps.
Sam

"GPIB error Query Interrupted" flashes on HP54542A

I've written a display and control program in Delphi 7 for the HP54542A. The program uses NI commands and the GPIB-32.dll library, per NI's recommendation. The program appears to work properly, but I frequently get the message "GPIB error-Query Interrupted" flashing on the scope screen. I've tried putting delays in the software after read and write commands, but that seems to have no effect. Any suggestions? The version of the GPIB-32.dll that I have is dated 1999. I'm using a fairly new NI PCMCIA card in a new Dell laptop.

tfowler,
Perhaps someone in the community has some experience with the HP54542A. We do have a newer GPIB driver which has a newer GPIB-32.dll that you could try:
NI-488.2 Download
We also have CVI and LabVIEW instrument drivers for this instrument that you could try out (since you are using Delphi you could at least check out what the drivers are doing and get some ideas):
54542A Driver Downloads
Craig H.

Keithley 6514 query interrupted problem

I am trying to read a current from Keithley 6514 Electrometer. The current is really small so it takes a while for the electrometer to find the right range. I use a VISA Write to send "MEAS:CURR?" and a VISA Read followed immediately. I sometimes got error -410, which means query interrupted. Somehow VISA Read returned before the measurement was completed. How do I fix this?

You may be able to configure the Electrometer to enable SRQ events. This way, the Electrometer could assert the SRQ line when it has completed the measurement. I believe with VISA you'll call viEnableEvent() for VI_EVENT_SERVICE_REQ. You'll need to send another string to the instrument to enabling SRQ events. That information should be in the manual from Keithley. You can then call viWaitOnEvent() to wait until the operation has completed.
Craig A
National Instruments Engineer

Query optimization in Oracle 8i (tunning)

Hi everyone,
The following SQL statement use more than 15% of the CPU of the machine where it is executed. Please if somebody can help me to rewrite or hinting the query.
This is the statement:
SELECT
/*+ INDEX(APD IDX_ABAPLANI_DET_SOL) */
apd.sinonimo,
apd.sinonimo_planificacion,
apd.cod_despensa,
apd.estante_cod,
apd.correlativo_solicitud,
apd.prioridad,
apd.correlativo_det_sol,
apd.insumo_sinonimo,
apd.cantidad_solicitada,
apd.cantidad_despachada,
apd.estado,
apd.sinonimo_usuario,
apd.sinonimo_observacion,
ap.fecha_creacion,
ap.centro_resultado,
aud.nombre,
aud.a_paterno,
aud.rut,
aud.username,
cenres.cod_flex codigocr,
insumo.cod_flex insumocod,
cenres.des_flex despensa_descripcion,
cenres.des_flex crdescripcion,
insumo.des_flex insumodescripcion
FROM
aba_usuario_despachador aud,
cenres,
insumo,
aba_planificacion_detalle apd,
aba_planificacion ap
WHERE ap.sinonimo = apd.sinonimo_planificacion
AND aud.sinonimo = apd.sinonimo_usuario
AND ap.centro_resultado = cenres.sinonimo
AND insumo.sinonimo = apd.insumo_sinonimo
AND apd.sinonimo_usuario = NVL (:b1, apd.sinonimo_usuario)
AND apd.sinonimo_planificacion = NVL (:b2, apd.sinonimo_planificacion)
AND apd.correlativo_solicitud = NVL (:b3, apd.correlativo_solicitud)
AND apd.estante_cod = NVL (UPPER (:b4), apd.estante_cod)
AND apd.cod_despensa = NVL (UPPER (:b5), apd.cod_despensa)
AND apd.estado = NVL (:b6, apd.estado)
AND ap.centro_resultado = NVL (:b7, ap.centro_resultado)
AND TO_DATE (TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy'), 'dd/mm/yyyy')
BETWEEN TO_DATE (NVL (:b8,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')
AND TO_DATE (NVL (:b9,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')
AND apd.estado NOT LIKE :b10
ORDER BY apd.sinonimo;The version of the database is 8.1.7.4.0.
Here is the output of EXPLAIN PLAN:
Plan
SELECT STATEMENT CHOOSECost: 2,907 Bytes: 104,312 Cardinality: 472
     32 SORT ORDER BY Cost: 2,907 Bytes: 104,312 Cardinality: 472
          31 CONCATENATION
               15 FILTER
                    14 NESTED LOOPS Cost: 11 Bytes: 52,156 Cardinality: 236
                         11 NESTED LOOPS Cost: 10 Bytes: 177 Cardinality: 1
                              8 NESTED LOOPS Cost: 9 Bytes: 133 Cardinality: 1
                                   5 NESTED LOOPS Cost: 8 Bytes: 67 Cardinality: 1
                                        2 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION_DETALLE Cost: 7 Bytes: 52 Cardinality: 1
                                             1 INDEX FULL SCAN NON-UNIQUE ADMABA.IDX_ABAPLANI_DET_SOL Cost: 3 Cardinality: 1
                                        4 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION Cost: 1 Bytes: 15 Cardinality: 1
                                             3 INDEX UNIQUE SCAN UNIQUE ADMABA.PK_ABA_PLANIFICACION Cardinality: 1
                                   7 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_USUARIO_DESPACHADOR Cost: 1 Bytes: 3,498 Cardinality: 53
                                        6 INDEX UNIQUE SCAN UNIQUE ADMABA.ABA_USUARIO_DESPACHADOR_PK Cardinality: 53
                              10 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 14,828 Cardinality: 337
                                   9 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 337
                         13 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 1.037.828 Cardinality: 23,587
                              12 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 23,587
               30 FILTER
                    29 NESTED LOOPS Cost: 11 Bytes: 52,156 Cardinality: 236
                         26 NESTED LOOPS Cost: 10 Bytes: 177 Cardinality: 1
                              23 NESTED LOOPS Cost: 9 Bytes: 133 Cardinality: 1
                                   20 NESTED LOOPS Cost: 8 Bytes: 67 Cardinality: 1
                                        17 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION_DETALLE Cost: 7 Bytes: 52 Cardinality: 1
                                             16 INDEX RANGE SCAN NON-UNIQUE ADMABA.IDX_ABAPLANI_DET_SOL Cost: 3 Cardinality: 1
                                        19 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_PLANIFICACION Cost: 1 Bytes: 15 Cardinality: 1
                                             18 INDEX UNIQUE SCAN UNIQUE ADMABA.PK_ABA_PLANIFICACION Cardinality: 1
                                   22 TABLE ACCESS BY INDEX ROWID ADMABA.ABA_USUARIO_DESPACHADOR Cost: 1 Bytes: 3,498 Cardinality: 53
                                        21 INDEX UNIQUE SCAN UNIQUE ADMABA.ABA_USUARIO_DESPACHADOR_PK Cardinality: 53
                              25 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 14,828 Cardinality: 337
                                   24 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 337
                         28 TABLE ACCESS BY INDEX ROWID OPS$NUCLEO.NUC_CODIGOS_FLEXIBLES Cost: 1 Bytes: 1.037.828 Cardinality: 23,587
                              27 INDEX UNIQUE SCAN UNIQUE OPS$NUCLEO.NUC_CODFLEX_PK Cardinality: 23,587                Thanks in advance!
Edited by: user491853 on 21-ago-2012 15:29

A few comments looking at your sql query:
How much time the query is taking?
How many rows are there in the tables?
Make sure the stats are up-to-date.
Please kindly follow the instructions provided by others as well.
>
The version of the database is 8.1.7.4.0
>
Suggestion: Upgrade your version. Oracle Cost Based Optimizer is more smarter now.Upgrading will make your life much more easier as there are so many enhancements.
AND TO_DATE (TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy'), 'dd/mm/yyyy')
BETWEEN TO_DATE (NVL (:b8,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')
AND TO_DATE (NVL (:b9,TO_CHAR (ap.fecha_creacion, 'dd/mm/yyyy')),'dd/mm/yyyy')Why are you using TO_DATE/TO_CHAR on a date column?
AND ap.centro_resultado = NVL (:b7, ap.centro_resultado)the same can be rewritten as below:
AND (ap.centro_resultado =:b7 and :b7 is not null) or :b7 is null This applies to other predicates you are using as well.
The table used in the plan is not found in your sql query eg NUC_CODIGOS_FLEXIBLES.
Regards
Biju

Query tunning in Oracle using Explain Plan

Adding to my below question: I have now modified the query and the path shownby 'Explain plan' has reduced. The 'Time' column of plan_table is also showing much lesser value. However, some people are suggesting me to consider the time required by the query to execute on Toad. Will it be practical? Please help!!
Hi, I am using Oracle 11g. I need to optimize a Select query(Need to minimize the execution time). I need to know how 'Explain Plan' would help me. I know how to use Explain Plan command. I refer Plan_table table to see the details of the plan. Please guide me regarding which columns of the Plan_table should be considered while modifying the query for optimization. Some people say, 'Time' column should be considered, some say 'Bytes' etc. Some suggest on minimizing the full table scans, while some people say that I should minimize the total no. operations (less no. of rows should be displayed in Plan_table). As per an experienced friend of mine, full table scans should be reduced (for e.g. if there are 5 full table scans in the plan, then try to reduce them to less than 5. ). However, if I consider any full table scan operation in the plan_table, its shows value of 'time' column as only 1 which is very very less. Does this mean the full scan is actually taking very less time?? If yes, then this means full table scans are very fast in my case and no need to work on them. Some articles suggest that plan shown by 'Explain Plan' command is not necessarily followed while executing the query. So what should I look for then? How should I optimize the query and how will I come to know that it's optimized?? Please help!!...
Edited by: 885901 on Sep 20, 2011 2:10 AM

885901 wrote:
Hi, I am using Oracle 11g. I need to optimize a Select query(Need to minimize the execution time). I need to know how 'Explain Plan' would help me. I know how to use Explain Plan command. I refer Plan_table table to see the details of the plan. Please guide me regarding which columns of the Plan_table should be considered while modifying the query for optimization. Some people say, 'Time' column should be considered, some say 'Bytes' etc. Some suggest on minimizing the full table scans, while some people say that I should minimize the total no. operations (less no. of rows should be displayed in Plan_table). As per an experienced friend of mine, full table scans should be reduced (for e.g. if there are 5 full table scans in the plan, then try to reduce them to less than 5. ). However, if I consider any full table scan operation in the plan_table, its shows value of 'time' column as only 1 which is very very less. Does this mean the full scan is actually taking very less time?? If yes, then this means full table scans are very fast in my case and no need to work on them. Some articles suggest that plan shown by 'Explain Plan' command is not necessarily followed while executing the query. So what should I look for then? How should I optimize the query and how will I come to know that it's optimized?? Please help!!...how fast is fast enough?

Query Interrupts w/ Oracle

Similar Messages

Maybe you are looking for