Giving Query Interrupted Error on Spectrum screen

Hello All,
I want to do a screen capture for Spectrum analyzer ESA series. I am getting screen-shot but always same not the current one. If and only if i dont use MMEMEL function after the binary data read sub vi i get screen-shot but not the current one. And if i use Function MMEMEL then i get blank screen-shot. And on the screen of Spectrum i always get message that QUERY INTERRUPTED and at the error output i get warning. I dont know whats making these things to happened... I will be very glad if anyone help me with this...
thanks in advance...
Pals
Solved!
Go to Solution.
Attachments:
PSA Screen Capture via GPIB1.vi ‏35 KB
VISA Read Binary Block Data to File1.vi ‏12 KB

Hi Pals,
I think this problem is more related to your your spectrum analyzer then to LabVIEW. Is there any documentation or sample code from the vendor how to get a screenshot? Or do they offer any LabVIEW driver VI's on their homepage?
There is probably one thing you could try to change in your code, you can use a delay betwenn the VISA Writes, maybe the analyzer needs some time time to procees a command
Kind regards
Carsten

Similar Messages

"GPIB error Query Interrupted" flashes on HP54542A

I've written a display and control program in Delphi 7 for the HP54542A. The program uses NI commands and the GPIB-32.dll library, per NI's recommendation. The program appears to work properly, but I frequently get the message "GPIB error-Query Interrupted" flashing on the scope screen. I've tried putting delays in the software after read and write commands, but that seems to have no effect. Any suggestions? The version of the GPIB-32.dll that I have is dated 1999. I'm using a fairly new NI PCMCIA card in a new Dell laptop.

tfowler,
Perhaps someone in the community has some experience with the HP54542A. We do have a newer GPIB driver which has a newer GPIB-32.dll that you could try:
NI-488.2 Download
We also have CVI and LabVIEW instrument drivers for this instrument that you could try out (since you are using Delphi you could at least check out what the drivers are doing and get some ideas):
54542A Driver Downloads
Craig H.

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

I'm new to iPad mini and uv I'm trying to get a movie I purchased to where I can watch it offline but when I click the option to download and watch offline it keeps giving me and error with download try again later I have a good wifi connection ??

You have a "good WiFi connection". What does that mean exactly? Can you send and receive email and are other internet related activities working OK for you? Have you tried restarting or rebooting your iPad? Sometimes that helps. If nothing else, it's a good place to start.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

IMac G5 won't boot, external interrupt error

I started my iMac G5 and did get the chime but it automatically goes into OF mode. The fans run loudly and it continously scrolls an "external interrupt" error with a bunch of jargon that goes by so fast I can't read it.
I tried resetting SMU, none of the bootup key sequences work, I can't boot from disk and it won't go into target disk mode. I've searched online "external interrupt" which has been an issue for others, but haven't found an answer to the problem yet.
I just tried resetting SMU again. This time I got the chime again, but now have a black screen. After about 30 seconds of nothing the fans start running and the screen remains black. Help please!

Worth trying a few more times:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on resetting the PMU on a Power Mac G5, G4 and G3 :
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436

Query PLD Error

Hi all,
I have made query on PLD below :
SELECT T0.DocNum, LTRIM(LEFT(T0.JrnlMemo,17)) AS Tipe, (T0.CardCode' - 'T0.CardName) AS Nama, T0.CashSum, T0.CheckSum, T0.TrsfrSum,(SELECT CreditSum FROM RCT3
WHERE RCT3.DocNum=T0.DocNum AND RCT3.CreditCard=4) AS Debit,(SELECT CreditSum FROM RCT3
WHERE RCT3.DocNum=T0.DocNum AND NOT(RCT3.CreditCard=4)) AS Kredit,(SELECT SUM(CashSum) FROM ORCT T1 WHERE T1.Canceled='Y' AND T1.DocNum=T0.DocNum) As R_Cash,(SELECT SUM(TrsfrSum) FROM ORCT T1 WHERE T1.Canceled='Y' AND T1.DocNum=T0.DocNum) As R_Trans,(SELECT SUM(CreditSum) FROM RCT3 WHERE RCT3.DocNum=T0.DocNum AND (T0.Canceled='Y') AND RCT3.CreditCard=4) AS R_Debit,(SELECT SUM(CreditSum) FROM RCT3
WHERE RCT3.DocNum=T0.DocNum AND (T0.Canceled='Y') AND NOT(RCT3.CreditCard=4)) AS R_Kredit,(SELECT RCT2.DocEntry FROM RCT2
WHERE RCT2.DocNum=T0.DocNum) AS No_Invoice
FROM ORCT T0
WHERE (T0.DocDate >= [%0]) AND (T0.DocDate <= [%1]) AND T0.CashAcct = [%2]
ORDER BY T0.DocNum
We tried that query in Tools --> Query print Layout and the screen msg error after that query run. The message is "Internal Error (8153) occured (message 131-183)".
Why is the message error appeared? How to solve this error? Because the query if we run on SQL enterprise manager did not problem. It can be run normally.
Please help me about this matter.
Thanks a lot,
Agung

Hi,
Add dbo. infront of the table name in from clause.
As shown below.
SELECT T0.DocNum, LTRIM(LEFT(T0.JrnlMemo,17)) AS Tipe, (T0.CardCode' - 'T0.CardName) AS Nama, T0.CashSum, T0.CheckSum, T0.TrsfrSum,(SELECT CreditSum FROM dbo.RCT3
WHERE RCT3.DocNum=T0.DocNum AND RCT3.CreditCard=4) AS Debit,(SELECT CreditSum FROM dbo.RCT3
WHERE RCT3.DocNum=T0.DocNum AND NOT(RCT3.CreditCard=4)) AS Kredit,(SELECT SUM(CashSum) FROM dbo.ORCT T1 WHERE T1.Canceled='Y' AND T1.DocNum=T0.DocNum) As R_Cash,(SELECT SUM(TrsfrSum) FROM dbo.ORCT T1 WHERE T1.Canceled='Y' AND T1.DocNum=T0.DocNum) As R_Trans,(SELECT SUM(CreditSum) FROM dbo.RCT3 WHERE RCT3.DocNum=T0.DocNum AND (T0.Canceled='Y') AND RCT3.CreditCard=4) AS R_Debit,(SELECT SUM(CreditSum) FROM dbo.RCT3
WHERE RCT3.DocNum=T0.DocNum AND (T0.Canceled='Y') AND NOT(RCT3.CreditCard=4)) AS R_Kredit,(SELECT RCT2.DocEntry FROM dbo.RCT2
WHERE RCT2.DocNum=T0.DocNum) AS No_Invoice
FROM dbo.ORCT T0
WHERE (T0.DocDate >= %0) AND (T0.DocDate <= %1) AND T0.CashAcct = %2
ORDER BY T0.DocNum
This clue was given by suda from the same forum and it worked for me.
Tell me whether this has worked or not for you.
Thanks
Ravi

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

Case stmt with Like giving me syntax errors

Hi, The following stmt is giving me syntax error. Please help. Thank you.
SUM(CASE WHEN (GL_CODE_A.ACCNT = '12300100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING') OR (GL_CODE_A.ACCNT = '45600100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING' AND GL_CODE_A.GOALS LIKE (‘%R’)) THEN IFNULL(GL_JE_LINES.ENTERED_CR, 0) - IFNULL(GL_JE_LINES.ENTERED_DR, 0)ELSE 0 END)
-- how to debug this stmt, the error message is too long, and how do you all debug a syntax error in OBIEE?
-- Can you please let me know where the error is?
[nQSError: 10058] A general error has occurred. [nQSError: 27002] Near : Syntax error [nQSError: 26012] . (HY000)

ssk1974 wrote:
Hi, The following stmt is giving me syntax error. Please help. Thank you.
SUM(CASE WHEN (GL_CODE_A.ACCNT = '12300100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING') OR (GL_CODE_A.ACCNT = '45600100' AND GL_JE_HEADERS.SOURCE = 'Temp Transaction' AND GL_JE_HEADERS.JE_CATEGORY = 'PENDING' AND GL_CODE_A.GOALS LIKE (‘%R’)) THEN IFNULL(GL_JE_LINES.ENTERED_CR, 0) - IFNULL(GL_JE_LINES.ENTERED_DR, 0)ELSE 0 END)
-- how to debug this stmt, the error message is too long, and how do you all debug a syntax error in OBIEE?
-- Can you please let me know where the error is?
[nQSError: 10058] A general error has occurred. [nQSError: 27002] Near : Syntax error [nQSError: 26012] . (HY000)You debug your statement like you debug everything. Take it apart and rebuild it slowly until you find the piece that causes the error. One thing I see right off is that you have smart quotes around your %R.
Don't add anything from Word, because smart quotes don't work. Change the single quotes to straight quotes and your query should work.

MIR4 transaction is giving ABAP Runtime Error

Hi Experts,
When I am trying to display the invoice in MIR4 and/or MIRO the system is generating ABAP runtime error. DYNPRO_FIELD_CONVERSION. This is in Version ECC 6.0.
Short text
    Conversion error
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the curren
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manag
    termination messages, in particular for long term reference.
Error analysis
    The program has been interrupted and cannot resume.
    Program "SAPLMR1M" attempted to display fields on screen 6310.
    An error occurred during the conversion of this data.
How to correct the error
    There was a conversion error in the output of fields to the screen.
    The formats of the ABAP output field and the screen field may not match.
    Some field types require more space on the screen than in the ABAP
    program. For example, a date output field on the screen requires two
    more characters than the corresponding field in the ABAP program. When
    the date is displayed on the screen, an error occurs resulting in this
    error message.
                  Screen name.............. "SAPLMR1M"
                  Screen number............ 6310
                  Screen field............. "DRSEG-REMNG"
                  Error text............... "FX015: Sign lost."
    Other data:
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Please help us to solve this issue.
Thanks and Regards,
Havina
Edited by: Havina Kutty on May 19, 2009 11:54 AM

Hello,
Please refer
Note 503934 - MIRO: Dump DYNPRO_FIELD_CONVERSION -> field 'REMNG'
Note 445853 - MIR4:more credit memos than invoices for service
Note 393189 - MIRO: Incorrect update of BPMNG -> DYNPRO_FIELD_CONVERSION
Regards,
Ravi

My photoshop on adobe creative master suite collection keeps giving me a error on the graphics hardware that is not officially supported ? is that why i am having probelms submitted my photoshop to class.

it keeps giving me a error that the graphics hardware that is not officially supported ? could this because of why i can't send my school work in?

BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

App world keeps giving me the error message

I have a blackberry Q10 and everytime I try and download something from the app world it keeps giving me the error message of ' an error has occured. Please try again later' this started happening when I upgraded my app world.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support. Also check your BB10 OS level to be sure it also is up to date.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In ME29n (PO appr), error "Cannot Find Screen Element shell in Replay Mode"

In ME29n (PO approval), in the header I pressed on the release button, the recording went well. and while executing the script it worked well. Problem is When there is any change in the ME29n HEADER screen (e.g. expanding header and collapsing header: specially if header is in Collapsed mode) , ecatt is giving error "Cannot Find Screen Element shell in Replay Mode" "Error in eCATT command SAPGUI".
Please help me how to avoid this error either in recording phase or in SAP settings.
Also discuss how to make ecatt script independent of the system settings like HEADER is in collapsed mode or expanded mode.
Thanks in advance.

Hello Srinivas,
Once the value is retrieved into the variable , based on whether you need collapse or not you can put ur SAPGUI recording inside the loop and continue ur operation.
eg:
say currently its collapse and u need collapse to carryout ur process
IF ( RC = "COLLAPSE HEADER CTRL+F5" ).
your process (SAPGUI recording)
ELSE (if its expanded and u need collapse)
call the script to collapse or you can record to collapse and the continue your process
ENDIF.
Hope this answers your question , let me know if not.
Thanks & Best regards,
Ajay

Error regading the screens..

hello All,
I am doing the following functionality.
On prog1 screen there is button b1 on clicking that i am submiting prog2.
Same,
On prog2 screen there is button b2 on clicking that i am submiting prog1.
I am clicking the buttons as b1 -> b2 -> b1. After some clickings it is giving me the error message "Maximum number of internal sessions reached". and then it is not working i am trying to see the error message explanation but i think it is not available
How can i remove this. I dnt want to create new sessions while clicking buttons.
What i have to do to remove this message.
thank you for your help.

Hi,
when ever you click button its creating new session.and maximum we can open 6 sessions for 1 login.
so just try the below
LEAVE TO SCREEN v_screen
Its just replace the current screen without creating new session for your program.
Regds
Sivaparvathi
Please reward points if helpful.............

Keithley 6514 query interrupted problem

I am trying to read a current from Keithley 6514 Electrometer. The current is really small so it takes a while for the electrometer to find the right range. I use a VISA Write to send "MEAS:CURR?" and a VISA Read followed immediately. I sometimes got error -410, which means query interrupted. Somehow VISA Read returned before the measurement was completed. How do I fix this?

You may be able to configure the Electrometer to enable SRQ events. This way, the Electrometer could assert the SRQ line when it has completed the measurement. I believe with VISA you'll call viEnableEvent() for VI_EVENT_SERVICE_REQ. You'll need to send another string to the instrument to enabling SRQ events. That information should be in the manual from Keithley. You can then call viWaitOnEvent() to wait until the operation has completed.
Craig A
National Instruments Engineer

Error while generating screens in BDT

Hi All,
I getting following error while generating screens using t-code BUSP for a CAA2 t-code
"Client 040 appl.object REWB screen REWB10:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes.
Could some body help me in this regards?
with regards,
Sumanth

Hi,
For a dynpro there are 199 Lines available for screen elements and on the average the restriction of 10 views per section and 10 sections per screen. Just check this.
Thanks and warm regards,
Smita.

SAP System Message: Syntx error or generation error in a screen

dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
albert

hello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert

Giving Query Interrupted Error on Spectrum screen

Similar Messages

Maybe you are looking for