Query of GL line items along with "the other side of the JEs"

Hello All,
I am trying to create an ABAP program or SAP query that would allow me to create an output of all line items posted to a general ledger account for a particular fiscal year(s) along with the other side the journal entry.
Said another way, I want all documents posted to a general ledger account along with the rest of the line items included with those journal entry.
For example, if I wanted to do this for Bad Debt Expense (P&L acct), I would like to see all those bad debt write off postings that were (credit Trade AR and Debit Bad debt Expense) vs. adjusting the bad debt reserve or any other posting in there.
Rather than looking at each transaction individually, I think this query would allow me to see the big picture of all posting to a particular account.
Any help is appreciated.

Rob,
I appreciate the insight. I think you answered my questions, but could you provide me with a little more detail so I am on the same page as you.
For the BSIS and BSAS, I am assuming I can just use a FI  t-code FBL3N to obtain the information.
Could you explain to me how to get the output in such a way and how to include it in the BSEG to get the complete journal entries for all of the document numbers I would get from the FBL3N. Or can I perform this in one function.
Thank you.

Similar Messages

  • How to make plant default on the line item along with the item category

    Hi All,
    I want to default Plant on the line item along with the item category.In order to meet the following scnario.
    1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
    Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
    First line item is the main item which appears along with the Plant 1 which contains valuated items
    Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
    I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
    Rahul

    Delivering Plant is determined in the following order
    1. Customer material info record.
    2. Customer master
    3. Material master.
    Use one of them an default your plant.
    I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
    regards
    jude

  • HT204407 The location for my device finds me the other side of the world ..I am writing this query on it ..what is happening

    On find my friends app. It shows my iPad on the other side of the world even though I am currently writing on it..any thoughts ? I'm in France it says the iPad is in Guadaloupe

    Hello there Smart43,
    It sounds like you are not able to correctly see the message you are typing because the keyboard is in the way. I can understand how that would be pretty frustrating. I would start by quitting the running apps on your device:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • When I open a new tab, I have to move to the other side of the page to click "home". Can I set the same "home" default for new tabs?

    My home page opens in the initial FireFox window, but new tabs open with a blank page. To get to my default page I have to click "home", but now it's way over on the other side of the page.
    Can I set a default for new tabs?

    right click on the control bar and choose "adapt" (or something like that). A window will pop up. Ignore that window and move the home button to the place you want it ''on the control bar''

  • Will the smart cover damage the other side of the screen?

    I notice that the smart cover magnetically attaches only on one side of the ipad. However, i on a number of occassions left the smart cover in a position where it made contact with the other side of the ipad where it doesnt magnetically attaches. When this happens, the screen blanks out for a moment, until i get the smart cover out of the way. Can someone enlighten me on does this blanking out of the ipad screen or having magnetic stuffs touching the ipad damage any parts of the ipad? Thank you so much for joining this discussion!

    No, the minor magnetic interference of the cover will not damage the device. Rest easy

  • At the bottom - the url if you click on it - it switches to the other side of the browser. How do I disable that completely - it's annoying and gets into the way

    This is not an issue of functionality. But in convenience. When you click on a link or pass over a link in a webpage, at the bottom of the browser it shows the url. sometimes if you hover or that it switches to the other side of the browser. For example: The Link is firefox. Hover over it and at the bottom is shows http://www.mozila.org. And if you click on it while it is going to the website, if you hover over the URL it moves to the other corner of the browser. My question is - is there a way to disable that function in Firefox. Sometimes that URL just sits there if you don't have over it or click it off. It's just a bit annoying at times.

    That can happen if the link is at the bottom on the browser window and is (partly) covered by the link preview notification that used to be on the status bar in previous Firefox versions.
    If you hover such a link that is covered by the pop-up the Firefox may swap that link for right to left or vice versa.
    You can use this extension to hide the pop-up that shows the URL of a link on hover and other data that previously appeared on the Status bar.
    *Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

  • My itunes shows my iphone but it has an apple logo and a lock on the other side of the screen but i can't sync or restore my iphone.

    My itunes shows my iphone but it has an apple logo and a lock on the other side of the screen but i can't sync or restore my iphone.
    what do i do?

    Did you enable your Menu and Sidebar?
    Ctrl+S to view Sidebar
    Ctrl+B to view Menu Bar

  • Just got my MBP back from repair, must have serial to open FCE. My box is on the other side of the country. Awesome.

    Just got my MBP back from repair, must have serial to open FCE. My box is on the other side of the country. Awesome.

    Phone? E-mail?
    Your serial usually appears on the splash screen .... if you get to see that.
    mish

  • How can I monitor Status word From the other side of the GPIB bus

    I develop Thermal system control that should be operate thru the GPIB IEE 488.2 bus , my instrument application already written in Visual Basic ,The system knowes to do basic operation such as SETPOINT ,AIRDUT , BEGIN , STOP and more but I have do a problem , any time that I capture command from the controller the status word stuck at listener mode and I can not send another command again because my loop is waiting for the other side (the controller ) to tallk by monitor the IBSTA word .
    There is anyway to reset ,clear ,initialize STATUS word again to his default value ?
    Note : I am using VB 6 , the Samples that you have here for Non-controller is good so far if I want to send and recive data manualy (c
    omputer to computer)
    What if I have A system that work and always waiting for capture command and do somthing ?
    I will be very greatful if anyone can help me , send me sample code for Status checking loop.
    MIKI-AVI

    Hello Miki-Avi,
    I'm having a little bit of trouble understanding what you're trying to do. It seems that you have an instrument application that you have written and works in some instances but gets into an infinite loop in other cases. I think that your loop is waiting for something in the Status byte to change, and you're wondering how you can get it to change.
    I'm not sure what bit you're waiting for, but I would assume that it is the LACS bit 2. You do not want to simply reset the IBSTA byte because this byte tells you what is happening on the GPIB interface. So, if you're waiting for the LACS bit to change, then you are waiting for the board to be addressed as a listener. Your controller would address the non-controller as a listener once you sent it da
    ta with an IBDEV and an IBWRT call.
    If you are looking for code for a status checking loop, check the following resources. Remember that you must call ibwait 0 to update your IBSTA byte. The 488.2 Function Reference is very useful in figuring out what you need to do.
    http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3EF8D56A4E034080020E74861&p_node=DZ52353&p_submitted=N&p_rank=&p_answer=&p_source=Internal
    http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/9cc0939663f1c5de862565d70082e89e?OpenDocument
    Please let me know if you need more assistance.
    Scott B.
    National Instruments
    Applications Engineer

  • HT3529 If I'm using my email to send messages and the other person (using a non-Apple phone) is on the other side of the world, will it charge them more?

    Is it the same as sending a normal text message for them, more, or less? This person cannot afford to be charged more, and in any case, their phone can't send messages to phones far away.

    You can only use the Message app on an iOS device to Message other users with the Messages app.
    There are third-party apps like Text+ that can send text messages to all phones. Usually the their phone carriers charge by the text message.
    However, sometime if both devices have the same texting app, the texting is free except for the data charge for the phone.

  • HT5783 My MacBook Pro (Mid-2009) digital output has stopped working. It turns on the red light at the other side of the plug, but fails to connect with my receiver. Output from Airport works fine.

    It was working fine until now, and now suddenly, the sound is gone. I've tried PRAM and SMC reset. Nothing works.
    Using the same cable with my airport express, through airplay, the sound comes out fine.
    It wasn't working when on Mavericks, nor now, on Yosemite.

    Hey marcalc,
    Thanks for the question. I understand that you are experiencing issues with the digital output of your MacBook Pro. The following resource may provide a solution:
    OS X Mavericks: If you can’t hear sound from your speakers
    http://support.apple.com/kb/PH13841
    If you’re trying to listen through a digital receiver
    If you’re using your computer’s digital output port (not available on all computers), choose Apple menu > System Preferences, click Sound, then click Output. Make sure Digital Output is selected.
    Make sure your computer is connected to a digital-ready receiver using an optical digital cable, and that your receiver is set up for digital input (see the information that came with your receiver).
    Try adjusting the volume on your receiver. You can’t use the computer’s volume controls to adjust the volume while using digital output.
    Thanks,
    Matt M.

  • Itunes library on the other side of the world. What do I do??

    Hi,
    I'm very new to ipod. I bought my I ipod in Canada and loaded audio files from a computer in Canada. I'm now living in Australia and found out that I can't load any music onto my ipod unless I'm using my computer in Canada!
    This is the most ridiculous thing. I mean, I just payed for all these mp3s in Canada and now I have to delete them all and start from scratch??
    Is there anyway I can load this ipod with a new computer without having hundreds of dollars of audio files already on there deleted? !!!
    I'm ready to ask for my money back and tell everyone to not get ipods, itunes, etc.

    Check out the following post:
    http://discussions.apple.com/thread.jspa?messageID=10570955#10570955
    Perhaps you can transfer what is on your iPod to the computer in Australia.
    Here is a link to kb article detailing download policy:
    http://support.apple.com/kb/HT1469?viewlocale=en_US

  • CS6 - painting on 3D object showing up on the other side of the object.

    A problem I do not have in CS5 - painting/stamping/blurring etc on a 3D model is showing up in unwanted, unseen areas of the model.  I have tried narrowing the falloff, selecting paintable areas.  Is there a setting I'm missing that fixes that in CS6?

    A little of both of the above, I think. I was making textures for the avatar 3D mesh (I can't find the current links, but they're available for free online) used in open sim and Second Life grids - my work will be used in a real time animation to be shot on a stand-alone opensim grid for a nonprofit arts project. There are funky areas in that model's mapping, which I'm used to working around. After a highly frustrating morning trying to get it done in CS6, I went back to CS5 and finished it. Then I started flipping back and forth between CS5 and CS6 to try to figure out what the differences are - I'm interested in CS6 for working with the screen capture clips. I don't know the tech, but I do see now that there are subtle differences in the way the paint, stamp, erase, smudge, and burn tools behave in CS6 on 3D models. By the end of the day my hands started to figure out the differences, and although it still feels alien, I can use those tools reasonably well on CS6 now, though not as fast.

  • When I open windows live my hotmail account in mozilla,The right side of the window is blank.I only see half my messages.

    When i open my hotmail or windows live mail.I only get half of my messages.The other side of the screen is blank.The right side is blank for some reason.

    You can try basic steps like these in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Report on Open Items along with Qty & Value for LA confirmed items

    Hi,
    I would like to know a report of Open POs(No Goods receipt made) but LA confirmed Items along with Values(Amount)
    i.e
    List of confirmed,unsent items along with Values for plant wise or vendor wise or PO Number wise.
    Regards,
    Vengat

    Hi,
    Any other inputs?
    Our client's requirement is to know how many (Both Qty & Value) of items for the input LA confirmed(ASN received) but no GR Made
    Regards,
    Vengat

Maybe you are looking for