Query on Mass Allocation - To calulate and book commision on prev qtr sales

Hi
Help required ASAP
I have been assigned a task of booking sales commission on the basis of sales of last Quarter within 3rd day of next month for three regions e.g.: South, West and North. Sales comm percent is say 2%.
I have been using usage based allocation uptill now and have been thinking to use mass allocations for this.
Can anyone give me some clues to have a workaround ?
Thanks
Shanks

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Similar Messages

Source tables for Query views and book marks

Hi Gurus,
We are planning to recreate Query views based on a perticular query from ODS to cube.
1. Is there a table that can provide me all the query views created on the portal, Created by(User Name), description based on the query name.
Basically i am looking for the following:
INPUT: Query Name
OUTPUT:
List of all the query views created on that query
The user name or id who created the query view
Description of the query view
2. I tried in meta data repository but it only gives me query views create in older version of the portal and not 7.0.
Appreciate your immediate assistance.
Thanks,
Ravi Ananthuni

Hi Ravi,
You can get the views created on the query and the ods too. But not through table...
This may not the right process but you can find what you want.
Open WAD --> add any web item into the template --> On the left pane --> Generic --> Data Provider --> Query/View --> Click on the View icon present there.....
A popup window opens --> Click on Infoareas --> Goto your Info provider present there --> Expand it, you will find the query created on the info provider and the Views created on that query.
Hope this helps u...
Regards,
KK.

Release-12.1.1. General Ledger-Mass Allocation-Error

Hi,
I have entered formula for Mass Allocation and I got Valdiated. While I running the Mass Allocation I got an
error. In the View Output File. "Failure detected. Please see log file." When I seeing the Log file. I got the error
GLAMAS module: Run MassAllocations
Current system time is 01-OCT-2009 09:02:38
glamai() 01-OCT-2009 09:02:38**************************************************
01-OCT-2009 09:02:38
AMAS0010: General Ledger MassAllocations Log File
command_mode = C
access set id = 1017
incremental mode = N
average journal flag = N
ledger id override value = 1
ledger override currency = USD
balance segment override value = 02
allocation batch id = 10079
period = Jan-09
journal effective date = 2009/01/31 00:00:00
calc effective date = 2009/01/31 00:00:00
glasob() 01-OCT-2009 09:02:38
gluini() 01-OCT-2009 09:02:38
glugsn() 01-OCT-2009 09:02:38<< glugsn() 01-OCT-2009 09:02:38
<< gluini() 01-OCT-2009 09:02:38
accounted period type = Month
chart_of_accounts_id = 101
number of flexfield segments = 5
balancing segment name = SEGMENT1
management segment name = NA
security segment name = NA
flexfield delimiter = '-'
active segments =
SEGMENT1
SEGMENT2
SEGMENT3
SEGMENT4
SEGMENT5
flex value sets =
1002470
1002471
1002472
1002473
1002474
account segment = SEGMENT3
account segment length= 5
flexfield length = 21
<< glasob() 01-OCT-2009 09:02:38
glasys() 01-OCT-2009 09:02:38***********************************************
* Warning: profile option has not been set up:*
* GL: Number of Records to Process at Once *
* Warning: profile option has not been set up:*
* GL: Number of Accounts In Memory *
foundation user id = 1013417
foundation user name = ZUNAITHA
concurrent request id = 5807601
number of target records to process at a time = 1000
number of flexfields to cache = 2500
cache control segment = SEGMENT3
length of control segment = 5
length of flexfield = 21
<< glasys() 01-OCT-2009 09:02:38
glavcmd() 01-OCT-2009 09:02:38SHRD0117: Inserted 1 record(s) into gl_alloc_history
<< glavcmd() 01-OCT-2009 09:02:38
glacab() 01-OCT-2009 09:02:38glacab() - tf = 1, sqlerrd[2] = 1
glacab--loopcnt = 1 and size 2b Malloced is 984
<< glacab() 01-OCT-2009 09:02:38
glapst() 01-OCT-2009 09:02:38glapst() - pst0_stmt.arr =
SELECT period_name,
     to_char(start_date, 'YYYY/MM/DD'),
     to_char(end_date, 'YYYY/MM/DD'),
     to_number(to_char(start_date,'J')),
     to_number(to_char(end_date,'J')),
     period_type,
     period_year,
     period_num,
     adjustment_period_flag
FROM gl_periods
WHERE      period_set_name ='Accounting'
AND period_type ='Month'
ORDER BY period_year, period_num
AMAS0025: glapst() - Found 225 periods (COA=101)
control->coa_rec.pstat[0].period_name = Dec-95
control->coa_rec.pstat[0].start_date = 1995/12/01
control->coa_rec.pstat[0].end_date = 1995/12/31
control->coa_rec.pstat[0].jstart_date = 2450053
control->coa_rec.pstat[0].jend_date = 2450083
control->coa_rec.pstat[0].period_type = Month
control->coa_rec.pstat[0].period_year = 1995
control->coa_rec.pstat[0].period_num = 12
control->coa_rec.pstat[1].period_name = Adj-95
control->coa_rec.pstat[1].start_date = 1995/12/31
control->coa_rec.pstat[1].end_date = 1995/12/31
control->coa_rec.pstat[1].jstart_date = 2450083
control->coa_rec.pstat[1].jend_date = 2450083
control->coa_rec.pstat[1].period_type = Month
control->coa_rec.pstat[1].period_year = 1995
control->coa_rec.pstat[1].period_num = 13
control->coa_rec.pstat[2].period_name = Jan-96
control->coa_rec.pstat[2].start_date = 1996/01/01
control->coa_rec.pstat[2].end_date = 1996/01/31
control->coa_rec.pstat[2].jstart_date = 2450084
control->coa_rec.pstat[2].jend_date = 2450114
control->coa_rec.pstat[2].period_type = Month
control->coa_rec.pstat[2].period_year = 1996
control->coa_rec.pstat[2].period_num = 1
control->coa_rec.pstat[3].period_name = Feb-96
control->coa_rec.pstat[3].start_date = 1996/02/01
control->coa_rec.pstat[3].end_date = 1996/02/29
control->coa_rec.pstat[3].jstart_date = 2450115
control->coa_rec.pstat[3].jend_date = 2450143
control->coa_rec.pstat[3].period_type = Month
control->coa_rec.pstat[3].period_year = 1996
control->coa_rec.pstat[3].period_num = 2
control->coa_rec.pstat[4].period_name = Mar-96
control->coa_rec.pstat[4].start_date = 1996/03/01
control->coa_rec.pstat[4].end_date = 1996/03/31
control->coa_rec.pstat[4].jstart_date = 2450144
control->coa_rec.pstat[4].jend_date = 2450174
control->coa_rec.pstat[4].period_type = Month
control->coa_rec.pstat[4].period_year = 1996
control->coa_rec.pstat[4].period_num = 3
control->coa_rec.pstat[5].period_name = Apr-96
control->coa_rec.pstat[5].start_date = 1996/04/01
control->coa_rec.pstat[5].end_date = 1996/04/30
control->coa_rec.pstat[5].jstart_date = 2450175
control->coa_rec.pstat[5].jend_date = 2450204
control->coa_rec.pstat[5].period_type = Month
control->coa_rec.pstat[5].period_year = 1996
control->coa_rec.pstat[5].period_num = 4
control->coa_rec.pstat[6].period_name = May-96
control->coa_rec.pstat[6].start_date = 1996/05/01
control->coa_rec.pstat[6].end_date = 1996/05/31
control->coa_rec.pstat[6].jstart_date = 2450205
control->coa_rec.pstat[6].jend_date = 2450235
control->coa_rec.pstat[6].period_type = Month
control->coa_rec.pstat[6].period_year = 1996
control->coa_rec.pstat[6].period_num = 5
control->coa_rec.pstat[7].period_name = Jun-96
control->coa_rec.pstat[7].start_date = 1996/06/01
control->coa_rec.pstat[7].end_date = 1996/06/30
control->coa_rec.pstat[7].jstart_date = 2450236
control->coa_rec.pstat[7].jend_date = 2450265
control->coa_rec.pstat[7].period_type = Month
control->coa_rec.pstat[7].period_year = 1996
control->coa_rec.pstat[7].period_num = 6
control->coa_rec.pstat[8].period_name = Jul-96
control->coa_rec.pstat[8].start_date = 1996/07/01
control->coa_rec.pstat[8].end_date = 1996/07/31
control->coa_rec.pstat[8].jstart_date = 2450266
control->coa_rec.pstat[8].jend_date = 2450296
control->coa_rec.pstat[8].period_type = Month
control->coa_rec.pstat[8].period_year = 1996
control->coa_rec.pstat[8].period_num = 7
control->coa_rec.pstat[9].period_name = Aug-96
control->coa_rec.pstat[9].start_date = 1996/08/01
control->coa_rec.pstat[9].end_date = 1996/08/31
control->coa_rec.pstat[9].jstart_date = 2450297
control->coa_rec.pstat[9].jend_date = 2450327
control->coa_rec.pstat[9].period_type = Month
control->coa_rec.pstat[9].period_year = 1996
control->coa_rec.pstat[9].period_num = 8
control->coa_rec.pstat[10].period_name = Sep-96
control->coa_rec.pstat[10].start_date = 1996/09/01
control->coa_rec.pstat[10].end_date = 1996/09/30
control->coa_rec.pstat[10].jstart_date = 2450328
control->coa_rec.pstat[10].jend_date = 2450357
control->coa_rec.pstat[10].period_type = Month
control->coa_rec.pstat[10].period_year = 1996
control->coa_rec.pstat[10].period_num = 9
control->coa_rec.pstat[11].period_name = Oct-96
control->coa_rec.pstat[11].start_date = 1996/10/01
control->coa_rec.pstat[11].end_date = 1996/10/31
control->coa_rec.pstat[11].jstart_date = 2450358
control->coa_rec.pstat[11].jend_date = 2450388
control->coa_rec.pstat[11].period_type = Month
control->coa_rec.pstat[11].period_year = 1996
control->
glamtt() - sqlcode alloc-target drop table = 942
glamtt() - mtt_stmt.arr is
CREATE TABLE gl_alloc_target_5807601 (
     allocation_formula_id number(15) not null,
     request_id number(15) not null,
     entered_amount number not null,
     accounted_amount number not null,
     je_batch_id number(15) not null,
     je_header_id number(15) not null,
     je_line_num number(15) not null,
     period_name varchar2(15) not null,
     accounting_date date not null,
     max_amount_flag VARCHAR2(1),
     description      varchar2(240),
     code_combination_id number(15),
     message_number      number(15),
     line_type VARCHAR2(1),
     ledger_id number(15),
     validation_error VARCHAR2(30),
     SEGMENT1      VARCHAR2(25),
     SEGMENT2 VARCHAR2(25),
     SEGMENT3 VARCHAR2(25),
     SEGMENT4 VARCHAR2(25),
     SEGMENT5 VARCHAR2(25),
     SEGMENT6 VARCHAR2(25),
     SEGMENT7 VARCHAR2(25),
     SEGMENT8 VARCHAR2(25),
     SEGMENT9      VARCHAR2(25),
     SEGMENT10      VARCHAR2(25),
     SEGMENT11      VARCHAR2(25),
     SEGMENT12      VARCHAR2(25),
     SEGMENT13      VARCHAR2(25),
     SEGMENT14      VARCHAR2(25),
     SEGMENT15      VARCHAR2(25),
     SEGMENT16      VARCHAR2(25),
     SEGMENT17      VARCHAR2(25),
     SEGMENT18      VARCHAR2(25),
     SEGMENT19      VARCHAR2(25),
     SEGMENT20      VARCHAR2(25),
     SEGMENT21      VARCHAR2(25),
     SEGMENT22      VARCHAR2(25),
     SEGMENT23      VARCHAR2(25),
     SEGMENT24      VARCHAR2(25),
     SEGMENT25      VARCHAR2(25),
     SEGMENT26               VARCHAR2(25),
     SEGMENT27               VARCHAR2(25),
     SEGMENT28               VARCHAR2(25),
     SEGMENT29               VARCHAR2(25),
     SEGMENT30               VARCHAR2(25))
tablespace APPS_TS_INTERFACE
PCTFREE 50
STORAGE(initial 200K next 200K maxextents 121 pctincrease 0)
gluddl() 01-OCT-2009 09:02:39<< gluddl() 01-OCT-2009 09:02:40
glamtt() - sqlcode alloc target create table = 0
glamtt() - mtt_stmt.arr is
CREATE INDEX gl_alloc_target_5807601_n1
on gl_alloc_target_5807601 (je_header_id)
TABLESPACE APPS_TS_INTERFACE
STORAGE(INITIAL 20K NEXT 20K MINEXTENTS 1 MAXEXTENTS 121 PCTINCREASE 0)
gluddl() 01-OCT-2009 09:02:40<< gluddl() 01-OCT-2009 09:02:40
glamtt() - sqlcode alloc targets create n1 index = 0
glamtt() - mtt_stmt.arr is
CREATE INDEX gl_alloc_target_5807601_n2
on gl_alloc_target_5807601 (allocation_formula_id, je_line_num)
TABLESPACE APPS_TS_INTERFACE
STORAGE(INITIAL 20K NEXT 20K MINEXTENTS 1 MAXEXTENTS 121 PCTINCREASE 0)
gluddl() 01-OCT-2009 09:02:40<< gluddl() 01-OCT-2009 09:02:40
glamtt() - sqlcode alloc target create n2 index = 0
<< glamtt() 01-OCT-2009 09:02:40
SHRD0119: Deleted 0 record(s) from GL_ALLOC_JE_ID_INT.
sqlcaid: sqlabc: 0 sqlcode: 0 sqlerrml: 0
sqlerrmc:
ORA-00942: table or view does not exist
sqlerrp:      sqlerrd: 0 0 0 0 0 538976288
sqlwarn: sqltext:
oracaid:      oracabc: 0
oracchf: 0 oradbgf: 0 orahchf: 0 orastxtf: 0 orastxtl: 0
orastxtc:
orasfnmc: oraslnr: 0 orasfnml: 0
orahoc: 0 ormoc: 0 oracoc: 0
oranor: 0 oranpr: 0 oranex: 0
SHRD0015: glamai failed:
SHRD0033: Error Status: 0
SHRD0103: Function warning number: -1
glamai() - fatal sql error
Process logging off database and exiting ...
Can anyone help me in this regard
Thanks
Zunaitha

Hello.
Have a look on Metalink Doc ID: 857664.1
Octavio

MO Operating Unit Profile Option Needed for Mass Allocation in R12

Mass Allocation does not work in R12 unless you set MO Operating Unit profile option at GL Responsibility level. Is that an official requirement from Oracle or is that a bug? A client should be able to implement and use GL without setting operating units as they are needed for subledgers.

Hi
I have found the below mentioned information on MO: operating Unit Profile option from the Oracle E-Business Suite Multiple Organizations & Oracle General Ledger Reference Guide which directly or indirectly requires the setting of the profile option at the appropriate level (responsibility, site etc)
Profile Options not Owned by General Ledger:
The following profile option affects the operation of General Ledger, but is not "owned" by General Ledger:
• MO: Operating Unit - This profile option controls which operating unit a particular responsibility is assigned to.
Note: General Ledger's Account Inquiry window ignores the setting of this profile option. This allows you to drill down to your subledgers independent from their multiple organization setup. As a result, when you drill down to subledger details, General Ledger will show you all of the transactions that comprise an account balance, regardless of which organization originated the transaction.
To use multiple organizations, you must define an accounting setup with at least one legal entity, a primary ledger that will record the accounting for the legal entity, and an operating unit that is assigned to the primary ledger and a default legal context (legal entity).
You must set either the MO: Operating Unit or MO: Security Profile profile option for each application responsibility to use Multiple Organizations context sensitive applications. When you connect to the Oracle Applications, you sign on by entering your user name and password. Then, you choose a responsibility that is available to your user. After you choose your responsibility, there is an initialization routine that reads the values for all profile options assigned to that responsibility. Oracle Applications allows you to see only the information for those operating units that are assigned to your responsibility.
Hope this helps.
Thanks and Regards
Manish Jain

Mass Allocation Generate Accounting Error

when Trying to Generate Accounting For Mass Allocation after validating the formula the request results in the following Error
ORA-00942: table or view does not exist
Any one Can help
Regards,
Mohammed Badry

Error:
A - check the Data access set to make sure that you have read\write access to the ledger.. and also make sure the profile option "GL: Data Access Set" has the correct data access set assigned.
B: Ensure that you are using a correct\value combination -> you may have Value set security on, which does not permit you from accessing certain values from a particular responsibility.
C: Ensure that you are using a correct\value combination -> you may have Value set security on, which does not permit you from accessing certain values from a particular responsibility.
D: do a account enquiry on each of the combinations that you have specified in line A, B & C. If there is no balances for the combination in line A then there will be nothing that can be put across to the target.
E: NA - dont know?
F: Ensure that when you have a parent in any of the lines of the mass allocation formula that you are using either Looping or Sum.. Ensure that you do not use a 'C' for constant on a parent value. You can not post to parents in Oracle.
G: you will need to think about turning on Dynamic insertion. this is a whole new discussion on its own
Another quick Suggestion is to try running mass allocations on a test instance with a GL Super User Account which has read\right access to all ledgers. Always test mass allocations in a test environment before moving into prod.
Hope this helps,
Elham Abawi
Edited by: Elham Abawi on 21/02/2010 18:44
Edited by: Elham Abawi on 21/02/2010 18:44

Mass Allocation ERROR

When running mass allocation following errors occured,
Error:
A: Write access is not available to ledger/ledger set in the Target and Offset Lines.
B: Invalid ledger/balancing segment value combination.
C: Invalid ledger/management segment value combination.
D: No journal was created because accounts for allocation basis have zero or no balances.
E: Invalid code combinations id.
F: Flexfield with parent segment value is not allowed.
G: Failed to create a new code combinations id.

Error:
A - check the Data access set to make sure that you have read\write access to the ledger.. and also make sure the profile option "GL: Data Access Set" has the correct data access set assigned.
B: Ensure that you are using a correct\value combination -> you may have Value set security on, which does not permit you from accessing certain values from a particular responsibility.
C: Ensure that you are using a correct\value combination -> you may have Value set security on, which does not permit you from accessing certain values from a particular responsibility.
D: do a account enquiry on each of the combinations that you have specified in line A, B & C. If there is no balances for the combination in line A then there will be nothing that can be put across to the target.
E: NA - dont know?
F: Ensure that when you have a parent in any of the lines of the mass allocation formula that you are using either Looping or Sum.. Ensure that you do not use a 'C' for constant on a parent value. You can not post to parents in Oracle.
G: you will need to think about turning on Dynamic insertion. this is a whole new discussion on its own
Another quick Suggestion is to try running mass allocations on a test instance with a GL Super User Account which has read\right access to all ledgers. Always test mass allocations in a test environment before moving into prod.
Hope this helps,
Elham Abawi
Edited by: Elham Abawi on 21/02/2010 18:44
Edited by: Elham Abawi on 21/02/2010 18:44

Mass Allocation

I need to create mass allocation, where need to distribute the amount of Account no. 53563 in various companies and this segment is my balancing segment, having perent and child. error came when validating mass allocation formula.
Batch Name: Mass allocation
Batch Description:
Type: Actual
Formula Name: Formula
Formula Description:
Formula Status: Error
Line B: You cannot loop on a detail segment value; use parent value to loop
Line C: You cannot sum on a detail segment value; use parent value to sum
Target Line: You cannot loop on a detail segment value; use parent value to loop
Ledger Currency Entered
Line Amount Ledger Accounting Flexfields / Segment Types Type Currency Type Currency
C C C C C C C C C C C
A PFL_Primary2021(BDT) 01.000.000.000.00000.53563.000.000.00000.00000 Actual BDT T
C L C C C C C C C C C
B PFL_Primary2021(BDT) 01.000.000.000.00000.53563.000.000.00000.00000 Actual BDT S STAT
C S C C C C C C C C C
C PFL_Primary2021(BDT) 01.000.000.000.00000.53563.000.000.00000.00000 Actual BDT S STAT
C L C C C C C C C C C
Target PFL_Primary2021(BDT) 01.000.000.000.00000.53563.000.000.00000.00000 Actual
C C C C C C C C C C C
Offset PFL_Primary2021(BDT) 01.000.000.000.00000.53563.000.000.00000.00000 Actual
Batch Status: Error
Please suggest.
Thanks in advance.
Parimal

Please refer MOS note:
Mass Allocation error: You cannot loop on a detail segment value;use parent value to loop [ID 369211.1]

Query-Automatic assignment of Record type to Book of Business-Pls help me

I have a query about Automatic assignment of record in Book of Business.
Using 5 record types & 50 regions as a part of Book of Business. You can say 50 sub-books.
I want to assign these 5 record type to particular Book when to create & modify.
Eg. When I create new account it should be automatically assigned to Book 1 & later I modify this account for reassignment to new user then it should be automatically added to the new user’s book.
I need to create workflow for this as Assign to book criteria for both when new record saved & when modified record saved.
I have tried this & its working; however problem is with the creation of two many workflows.
50 region (Books) x 5 record types * 2 - Create/modify flow = 500 workflows for one country!
If I am right then I can assign 1 record type with action as create or modify in 1 book only.
How to reduce these no. of workflows?
Pls help me out in this regard.
Regards
Mangesh

Mangesh,
I am sorry to tell you that there is no quick answer to this but i will say that maybe you need to rethink your book structure and their requirements here.
I have 4 types and 7 regions so you need to create books to allocate all these on create and also modify. Customers have raised concerns with this to Oracle and they are looking into it but they are along way from completing this. Sorry to spoil your day but i would strongly ask you to consider your books structure before you complete this.
Otherwise if you are using webservices you could assisgn the book when the record is piped into the CRM and then you only need to complete the modify workflows.

How do I retrieve apps and books that were lost in recent software update for my iPad?

Is it possible to retrieve lost apps and books in recent software update?

Yes it should be possible deppending on your version of ios on your ipad. In the app store you can go to "purchased" and download any apps you've previously purchased. I'm not sure if this will also work for books or not. Also, if you haved synced your ipad to your computer, itunes will have all your data (books, apps, music etc...) and you can load it all back up.

Music and books can't be deleted

The music and books that I have purchased can't be deleted ! It's driving me nuts and I want them off really bad. Please can someone tell me how you can do it !

Did you try Settings>General>Restrictions>Deleting Apps>Off? That might be why the app will not delete. And remember that the preinstalled apps can't be deleted or reinstalled.
DId you try Settings>General>Usage>Storage>Manage Storage>Music. Then select the songs, albums, etc that you want to delete and then tap the Efot button in then screen? You can also select books in the Setrings and delete them there. Songs and albums can be deleted in the music app by swiping from right to left across them to get to the red delete button. Books can be deleted by going to the Library pane of iBooks, Tao the select button, tap the books that you want to delete in order to select them, then tap Delete in the upper left.
IF none of that works for you, close all apps on the iPad and then reset the device. Then try again. No data will be lost.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT201272 1 track from iTunes is only playing until 3:50 (should be 14:48). Rest of album is OK. Happens on computer & iPod. How do I fix that track? "Purchased (new)" on right side of iTunes doesn't give me a Music option - just Apps and Books.

Hello,
I've purchased and downloaded an album from the iTunes store. It has 5 tracks. Tracks 1-4 are all fine. Track 5 is broken - it should have approx 15 minutes of music, but only plays to just under 4 minutes. This happens on my computer and on my iPod. How can I fix this please?
I've tried going to the "Purchased (new)" option in the quick links on the right hand side of the iTunes store. I thought I'd see an option for "Music" on the page it takes me to, but I don't get that option: I only see Apps and Books.
I'm using the computer that I purchased and downloaded the album from. It is authorised for this account.
I'm not aware of interrupting the download yesterday - it all seemed OK to me at the time and I thought it had completed successfully.
The album is Dvořák: Cello Concerto, Zuill Bailey, Indianapolis Symphony Orchestra & Jun Markl. It's the last track (In Nature's Realm) that's got the problem.
Thanks for any help.

Unfortunately you can't redownload music in all countries, as you have found.
You can however contact iTunes support regarding this issue here:
http://www.apple.com/support/itunes/contact/

I am trying to re-download some songs I deleted by mistake. I go to purchases and it only shows me options for Apps and Books, no list for Music. How can I get the music list to show up or alternatively how can I re-download the songs?

I messed up and deleted a few songs by mistake. When I go to the "purchases" option it only lists apps and books that have been downloaded, but music is not an option to see what was downloaded previously. Anyone know how I can re-download the songs ?
Thanks for any help! I am using the most recent version of iTunes.

I have been having the same problem.. and yes, I am in the US. I have tried reinsatllin gitunes several time and that doesn't work either

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

SQL Query (updateable report) Region - Conditionally Hide and Set Values

SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
       contract_id,
       CASE WHEN hardware_id IS NOT NULL THEN
               'HA'
            WHEN backup_dev_id IS NOT NULL THEN
               'BD'
            WHEN hardware_os_id IS NOT NULL THEN
               'HS'
       END item_type,
       hardware_id,
       backup_dev_id,
       hardware_os_id
FROM   "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID         NUMBER                        NOT NULL,
CONTRACT_ID     NUMBER                        NOT NULL,
HARDWARE_ID     NUMBER,
BACKUP_DEV_ID   NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
      (    hardware_id    IS NOT NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NOT NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NOT NULL
      )    Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value     Return Value
Hardware Asset    HA
Backup Device     BD
Computer System   HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far...

Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.

Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
Please help.

thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

Query on Mass Allocation - To calulate and book commision on prev qtr sales

Similar Messages

Maybe you are looking for