Query on programe RFLKORD10 for tcode FI.27 for account statement

for tcode : fi.27
If table bsid or bsad has dunning area with some specific value then i want to split account statement.
(we copied rfkord10 into zprogram and use that one.)
if anyone worked on same then please help me out.
Solution with coding or more technical explanation will be appreciated.
points will be rewarded.

on what basis u want to split ? first get the all the data into one internal table then split Internal table into 2 or 3 based on ur split conditions ?
just try , its simple , work around data only,so config .
Regards
Prabhu

Similar Messages

Any menu exit or badi for tcode F110

Dear all,
My requirement is that whenever the user runs tcode F110, a flat file has to be generated with all the details from tcode F110. How can i do that? Should i change the std pgm or any menu exit or badi available. Plz help me in this regard.

Hi
Following are the User Exits and BADIs available:
Enhancement
RFFOX074                                Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075                                Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081                                Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082                                Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100                                Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101                                Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102                                Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103                                Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104                                user exit
RFFOX105                                Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200                                Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210                                Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211                                Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230                                General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240                                Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250                                Enhancement for User Exit 250 (RFFODK_E)
RFFOX901                                Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902                                Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001                                Enhancement to Transaction FDTA (event after the download)
FEDI0002                                Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003                                Function exits for EDI docs in FI - Save PEXR segments
FEDI0004                                Function exits for EDI docs in FI - particular events
FEDI0006                                Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003                                Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041                                Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042                                Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043                                Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061                                Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062                                Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063                                Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064                                Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065                                Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066                                Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071                                Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072                                Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073                                Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT                         FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB                    F110: Check before scheduling a proposal/update run
Cheers
Shakir

How to find USER-EXIT for tcode - F110

I am new in USER-EXIT Please help   how to find USER-EXIT for F110
ASAP

Hi,
Enhancement/ Business Add-in            Description
Enhancement
RFFOX074                                Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075                                Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081                                Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082                                Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100                                Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101                                Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102                                Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103                                Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104                                user exit
RFFOX105                                Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200                                Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210                                Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211                                Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230                                General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240                                Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250                                Enhancement for User Exit 250 (RFFODK_E)
RFFOX901                                Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902                                Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001                                Enhancement to Transaction FDTA (event after the download)
FEDI0002                                Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003                                Function exits for EDI docs in FI - Save PEXR segments
FEDI0004                                Function exits for EDI docs in FI - particular events
FEDI0006                                Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003                                Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041                                Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042                                Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043                                Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061                                Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062                                Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063                                Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064                                Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065                                Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066                                Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071                                Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072                                Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073                                Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT                         FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB                    F110: Check before scheduling a proposal/update run
No.of Exits:         36
No.of BADis:          2
Arunima

Modification of values of variant through program for tcode CJB1

hi,
How can we modify variant values for the variant created in TCODE CJB1 and also how to get the variant name saved for tcode CJB1 ? is there any FM available or any sample code for getting/changing the above senario.
many thanks in advance
bobby

check these fm's
RS_ALL_VARIANTS_4_1_REPORT     All Variants for a Report
RS_CHANGE_CREATED_VARIANT
RS_CREATE_VARIANT              Creating a variant (not using a selection screen)
RS_GET_SCREENS_4_1_VARIANT     All screens assigned to a variant
RS_RWSET_CREATE_VARIANT
RS_RWSET_SAVE_VARIANT
RS_VARIANT_ADD
RS_VARIANT_ADMIN_DATA
RS_VARIANT_ATTR_SAVE
RS_VARIANT_CATALOG             Returns variant directory for a report in an internal table
RS_VARIANT_CAT_PRINT
RS_VARIANT_CHANGE              Change Variant
RS_VARIANT_CHECK_TSTC          Checks entries in report transaction maintenance
RS_VARIANT_CLIENTCOPY          Function Module for Client Copy
RS_VARIANT_CONTENTS
RS_VARIANT_CONVERT_TO_DYNAMIC
RS_VARIANT_COPY                Copy variant
RS_VARIANT_DELETE              Delete Variant (In Current Client or All Clients)
RS_VARIANT_DEL_ALL_CLIENTS
RS_VARIANT_DISPLAY
RS_VARIANT_DISPLAY_FROM_SELSCR
RS_VARIANT_DISPLAY_SUBSCREENS
RS_VARIANT_EXISTS              Checks whether variant exists
RS_VARIANT_FETCH

Transport Query generated program using SQ01

Dear All,
Please let me know how to transport a query generated program using SQ01. I have created a program from SQ01 query creation and assign a tcode to this program. When the program was generated there was no request create so how to make a request to transport this generated program to PRD.
Thanks in advance.

Hi,
for query transport (export/import or download/upload (which I prefer because it can be done between different SAP systems where no transport mechanism exists)) go to SQ02 and tick the button that looks like a car.
The t-code assignment (and maybe the the T-code is added in an area menu using SE43) needs to be transported seperately (if you use downlaod/upload as this does not create a transport request.
best regards, Christian

Enhance screen for tcode FCH9

I need to enhance the screen for tcode FCH9 to add more void reason. I do not want the check to be voided though. Is there is a user exit to enhance this screen or will have to create a custom transaction for this.

Hi,
there are no screen exits or BADIs which you can use to enhance SU01. So the only way how to do it is using enhancement framework and direct modifications of SAP programs.
Cheers

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

Need to create a mass upload program for appraisal document creation for multiple employee

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi Priyaranjan,
I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
Even tcode also u can get it prepared by Abap'ers.
Thanks and Regards
Balaji

Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

Hi Expertise,
I need to create a mass upload program for appraisal document creation for manager and his multiple employee
at a time using tcode appcreate.
Please help me out.
Best regards,
Priyaranjan

Hi,
I have done appraisal document creation for bulk using txt file.
this fm used for single for creation in standard tcode (phap_prepare): 'WZ_HRHAP_0DOC_WZ01_START'.
So create ztcode usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
While recording for single I have used manual option instead of automatic .

Problem in BDC for TCode S_ALR_87013620

Hi Gurus,
I have recorded the BDC for TCode S_ALR_87013620.
Executed the report S_ALR_87013620 by providing necessary details.
Displays the report and then clicked on Report-> Print -> PrinterNa
But when I execute through program it does not work. UNable to view Screens for Report-> Print->Printername
screens.

Hi Praveen Kumar
Go TCode S_ALR_87013620
In Program --> execute and print (Shift+f1)
this will execute and print your report..
i think ....no need BDC for printing i guess.....
Thanks
Ramesh

Screen exits/BADIs available for Tcode-QM02/QM03

Hi Everyone,
                   I have to modify a screen for Tcode-QM02( 'Checklist' tab) and add a drop down field to it.I have not worked on screen exits/BADIs prior to this please let me know how to proceed with this.
      Alsoplease tell me how can I manually go and check out whether a exit or BADI is available for this transaction?
Please reply as its a bit urgent.
Thanks and Regards
Abhishek

hi,
check these exits n badi's.
Transaction Code - QM02                     Change quality notification
Enhancement/ Business Add-in            Description
Enhancement
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0001                                Create PM/SM notification: Determine reference object
IWO10027                                User exit: Generate user-defined settlement rule
IWO10026                                User check on setting status 'Do not perform'
Business Add-in
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
goto system - status of ur transaction and find porogram name
then goto attributes of program n find package.
now goto smod or se18 click f4 click information system u will get all exits or badis available.

Program RFEBKA00(T-Code-   ff.5 ) for upload data problems

Hi Gurus,
Program RFEBKA00(T-Code-   ff.5 ) for upload the bank statement data and passing the with parameters.
When execute then :
Getting warning message     u201CWRONG PARAMETER: FILE_NAMEu201D
   Getting error message       u201CFile in disk drive can not be openu201D.
My text file data for upload:--
0000 01INGBNL2AXXXX00001
0000 01INGBNL2AXXXX00001
940 00
:20:INGEB
:25:0656905271
:28C:132
:60F:C100708EUR25470,35
:61:100709C2885,40N078
:86:AT673200000003743077 RLNWATWW F . W Kopieranstaltbetriebs- GmbH
:86: RG: 1001853
:61:100709C1296,41N078
:86:0666065284 Drukkerij Wilco BV Postbus 1477 3800 BL AMERSFOORT F
:86:ACT.NRS 1001851
:62F:C100709EUR29652,16
:64:C100709EUR29652,16
:65:C100710EUR29652,16
:65:C100711EUR29652,16
:65:C100712EUR29652,16
:65:C100713EUR34204,84
:65:C100714EUR34204,84
:65:C100715EUR34204,84
:86:D000000C000002D0,00C4181,81
:86:CF (Netherlands) Holding Limited BV
-XXX
If you have any Idea for upload data in ff.5 TCode please help.
Subasha Sahoo

Hi Sunita,
If your data is in a text file , simply save the file as tab delimited.
Then use FM 'GUI_UPOAD' to upload the file data into internal table.
Hope this helps.
Regards,
Abhijeet Kapgate

IDOC FOR TCODE F110

Hi GURUs,
1. I want to know whether there is any IDOC availlable for TCODE : F110 (payment run).
2. After payment run i want to download the file in text format ,so is there any way to download the file by using IDOC.
Thanks for your help.

For this take the ABAPer help.
1st: For 1st payment method, create one BDC program with all details and the parameters will be constant except the "Run date" and "Next payment date". In TCODE:SM36, you can schedule job at specific time. In that job give this BDC program name.
Once you do the payment run system automatically, clears the Vendors
Data to Bank server is possible using the IDoc - ( take the help of ABAPer in developing this IDoc) using the Automatic Job scheduling the IDoc, you can maintain this after completion of the above job. Before to this get the data to be sent to the Bank Server in a template format with SAP field mapping.
2nd: As this payment method requires the authorisation, you can go by manual execution of the IDoc , instead of the Automantic job scheduling.
3rd: Same like 1st..but the day of execution will deferrs...(ABAPer will take care of it)
Disadvantages:
- in the BDC program you have to hard code the number range
- you can't have an option to block / release the block using the edit proposal option
- IDoc creation depenedency should based on the volume of the payment documents: means after how much time this IDoc job scheduling should happen
Re: Automatic scheduling of the automatic payment programme

Error In BDC when uploading for tcode FS00

Hi Experts,
problem in uploading BDC session method for tcode FS00. when i run my program it is giving apopup error message that (BDC_INSERT screen invalid)
but my screen number is correct. i have checked this in recording program also.
THere are subscreens in this iam not using any subscreen numbers in my program.
Points will rewarded.
Thanks in advance.
Francis.

Hi Francis,
Check your T-code which u mentioned in that FM bdc_insert. Mostly the problem with that FM only. Check the coding for rrecording, if u miss the coding for any record then you may get problem.
Hope this helps you.
Regards,
Kumar

User exit for BADI for Tcode: IW31

Hi
Can any one tell me User-exit or BADI for Tcode: IW31.
Whenever an Order is released (IW31) or saved then automatically Purchase Requisition will be created by standard program. My requirement is like at the same time , we need to create Purchase order automatically based on Requisition created above within the transaction IW31.
Thanks in advance.
Sowjanya.

Try this
BADI : IWO1_ORDER_BADI
IWO1_PREQ_BADI
IWO1_SCREEN_MODIFY
User Exit : IWO10012 (SMOD)

Query on programe RFLKORD10 for tcode FI.27 for account statement

Similar Messages

Maybe you are looking for