Error In BDC when uploading for tcode FS00

Hi Experts,
problem in uploading BDC session method for tcode FS00. when i run my program it is giving apopup error message that (BDC_INSERT screen invalid)
but my screen number is correct. i have checked this in recording program also.
THere are subscreens in this iam not using any subscreen numbers in my program.
Points will rewarded.
Thanks in advance.
Francis.

Hi Francis,
Check your T-code which u mentioned in that FM bdc_insert. Mostly the problem with that FM only. Check the coding for rrecording, if u miss the coding for any record then you may get problem.
Hope this helps you.
Regards,
Kumar

Similar Messages

Problem in bdc session method for tcode FS00

Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY         = BDC.
*& DESCRIPTION      = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
       SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR,          " ACCOUNT NUMBER.
       BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS,          " COMPANY CODE.
       KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS,           " ACCOUNT GROUP.
       XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT,       " P&L STATEMEMENT.
       GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP,          " P&L STATEMENT TYPE.
       XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK,           " BALANCE SHEET STATEMENT
       SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML,        " SHORT TEXT.
       LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML,         " LONG TEXT.
       WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS,         " ACCOUNT CURRENCY.
       XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH,         " ONLY BALANCES IN LOCAL CURRENCY.
       MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ,         " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
       XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW,         " OPEN ITEM MANAGEMENT.
       XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES,         " LINE ITEM DISPLAY.
       ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA,         " SORT KEY.
       FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG,         " FIELD STATUS GROUP.
       XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON,         " RELAVENT CASH FLOW.
       END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
     PERFORM GET_FILENAME.
START-OF-SELECTION.
      PERFORM UPLOAD_DATA.
      PERFORM BDCDATA_OPEN.
      PERFORM BDC_POPULATE.
      PERFORM BDC_CLOSE.
*&      Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
     DYNPRO_NUMBER       = SYST-DYNNR
     FIELD_NAME          = 'P_FILE'
   IMPORTING
     FILE_NAME           = P_FILE.
endform.                    " GET_FILENAME
*&      Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = P_FILE
   FILETYPE                      = 'DAT'
TABLES
    data_tab                     = IT_UPLOAD.
endform.                    " UPLOAD_DATA
*&      Form BDCDATA_OPEN
   FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
   GROUP                     = 'GLMASTER'
   HOLDDATE                  = SY-DATUM
   KEEP                      = 'X'
   USER                      = SY-UNAME.
endform.                    " BDCDATA_OPEN
*&      Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR'    IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS'    IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS'    IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP'    IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK'    IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    TCODE                  = 'FS00'
   TABLES
     dynprotab              = IT_BDCDATA.
endloop.
endform.                    " BDC_POPULATE
*&      Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform.                    " BDC_CLOSE
*&      Form BDC_SUB1
   FORM FOR BDCDATA.
form BDC_SUB1   USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO =   C.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB1
*&      Form BDC_SUB2
      text
form BDC_SUB2   USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.

Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

eehenry wrote:
It is a problem with a secondary provider, "mag cloud" .
Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

Error in BDC when executed in back ground

Hi All,
We are working on a BDC interface for Material Master Basic Data Add or Change using SAP 4.7. The interface is working fine with CALL TRANSACTION (N,A screen modes), BDC foreground and Display error modes.
When the same session is executed in background mode it is not getting processed.
The error is caused while calling screen 2031 which uses a control. The diagnosis we received is given below
Control Framework: Fatal error - GUI cannot be reached
Message no. DC006
Diagnosis
When the Control Framework is started, the system checks whether the installed GUI supports frontend components such as controls. This check failed; the causes may be as follows:
1.) The program is running in the background
2.) A transaction was called using CALL TRANSACTION ... STARTING IN BACKGROUND TASK.
Procedure
Programs that run in the background cannot address controls on the frontend. In this case, the application must either include a fallback that does not depend on the user interface, or the program or transaction must detect for itself that is running in the background and terminate itself.
Is there any alternate method available for running the session in background with the controls?
Please help us in this regard.
Thanks in advance.
Kathirvel Balakrishnan

Hi Kathirvel!
In description of error: 'In this case, the application must either include a fallback that does not depend on the user interface, or the program or transaction must detect for itself that is running in the background and terminate itself.'
Obviously in material master only second option was implemented - termination.
Alternative: using IDOCs or BAPIs like BAPI_MATERIAL_SAVEDATA, BAPI_MATERIAL_MAINTAINDATA_RT.
Regards,
Christian

Group is not assigned error in LSWM when uploading Routings

Hi All,
I am trying to upload the routings using LSMW Direct Input method using program RCPTRA02. While executing the lsmw, i am getting an error " Group cannot be determined for material XXXXXXXX plant XXXXX". But the SAP has to assign the Group while creating the routing for the material and plant. I dont know why its throwing that error. Is there any problem with the mapping which i dont think so. Any suggestions to resolve the error.
Thanks

Hi ben,
we have exactly the same problem. Have you found some solution?
I would appreciate so much if you could keep in contact with me in order to explain me the solution. Please reply the message and write the solution as detailed as it would be possible.
Thanks in advance.

Help. error itms-90451 when uploading to the appstore

I need urgent help, I am submitting my app to the AppStore and I get this error. (see pic)
I uploaded a version of my app literally 2 days earlier and the only difference between that one and this one is that I missed a mouse event listener on a button. The first one went through fine but this one will not..

If you want to do it yourself next time here's how I repackaged the ane to work for tapjoy 10.2 on Windows:
- Unzip everything from the .ane file.
- Remove this folder: \META-INF\ANE\iPhone-ARM\Tapjoy.embeddedframework\Resources
- Rename and move to parent folder the platform.xml files inside iphone-ARM & android-ARM to android_platform.xml and ios_plaform.xml.
- Copy the .swc file inside the downloaded extension rar and paste it in the same location as the renamed xml files.
- Move everything to this folder inside the air sdk:
Open command prompt and run this from the bin folder:
adt -package -target ane TapjoyExtension.ane
extension.xml -swc TapjoyExtension.swc -platform iPhone-ARM -C iPhone-ARM -platf
ormoptions ios_platform.xml . -platform Android-ARM -C Android-ARM . -platform d
efault -C default library.swf
Perhaps you can define the directory for ADT to make it less messy, but I didn't bother.

LEAVE TO TRANSACTION error in BDC batch input FOR LT06 TCODE

Hi,
Iam running CALL TRANSACTION method for creating Material Document numbers for MB1B Tcode .
On capturing the document numbers created in the above process Iam trying to run LT06 tcode to create Transfer orders using session method .
All this process is in a single program .
Here it is creating the transfer orders but with LEAVE TO TRANSATION is not allowed in batchinput error and hence the status of the session is INCORRECT .
It would be helpful if i get the earliest responce .
Thanks

self

Error in BAPI_PO_CHANGE when uploading a account assignment

Hi,
I am trying to change account fields in the Purchase Order. I am using BAPI_PO_CHANGE to change the fields in Purchase Order.
The Purchase order , item no and Account assignment values are given in the excel file. I need to upload every all the PO in the excel file.
And so i fill the BAPI structure for each PO and pass it to the BAPI.
The Problem i am facing is that when i update the Profit center values its throwing an error The Reuistioner (value) and item(10) is assigned to other order account and one more error is document entented is not a sales document

Hi,
It seems you have not filled material number or otherwise segment POITEMX is not correctly filled.
Sanjeev

Keep getting error message 400 when uploading to Youtube

For the past couple of days I've been unable to upload video to YouTube. It gets all the way to 100% then it says it cannot connect to server (400). Previous to this I had uploaded a few videos--no settings are changed but now it doesn't work. I tried signing out & only signing back in right before upload. Also made sure the box that says stay signed in is unchecked. This is getting really frustrating as I use my BB for my business. I'm due for an upgrade in another month & had considered upgrading to a Q10 but now with all the trouble I'm having with my Torch ---constant lockups, having to battery pull a few times a day & how slow it is--I'm thinking of either going to an I phone or a Samsung. Does anybody have a fix for this --I'm not super tech savvy either.

Hi and Welcome to the Community!
Which problem do you wish to address, please? You talked all about YouTube and the 400 error being critical, but then mentioned in passing several other things, so I'm not quite sure which you want to deal with here. It's also completely possible that all you describe are symptoms of the same root cause...
So, based on all you describe, I suspect OS corruption...which, btw, will happen under the right circumstances with any device you might choose to buy.
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error with iTunes when connecting for first time.

Here is the error that I get when I connect my phone to my computer:
The software required for iPhone is not installed. Run the iTunes installer to remove iTunes. then install iTunes again.
I have the latest version on iTunes installed (7.3). I have tried removing itunes and reinstalling 4 or 5 times. Evan restarted my computer few times too. I'm running Vista so not sure if that's the problem.

Hi Bigrash,
Close iTunes, and disconnect your iPhone from your computer.
Go to "Control Panel", and go into "Programs".
Select "Installed Programs".
Here, find "Apple Mobile Device Support" from the list, and click on it. From the "File" menu, select "Change/Remove", and then click "Remove".
After that application has been fully uninstalled, go to this page, to download another copy of the iTunesSetup.exe installer:
Download iTunes - 7.3.0.54
After you've downloaded the iTunes installation pack again, launch iTunes, and connect your iPhone.
Do you still get that same error message, or not?
-Kylene

"An error has occurred" When searching for updates...

When Mac App Store application is searching for updates, I get the following errow:
"An error has occured
The operation couldn’t be completed.
(NSURLErrorDomain error -1012.)"
Anyone familiar with this? Has been occuring for the past week or so. Running Mavericks 10.9.1 and trying to update:(
Thanks in advance for any help;)

Found the issue resolution after I posted... funny searching for the error wouldn't find associated discussions. But searching based on my tags did;)
Thanks MQtx!!!!
https://discussions.apple.com/thread/5829770

Error in Km when submit for approval.

Hi
In Km once in a while we are having error when we submit a document to be approval. If I restart the application, the error will disappear. This is the error log I receive when I submit. Anybody have an idea.
Thank you
Could not create command with alias com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementCommand and classname com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementCommand:java.lang.NullPointerException
     at com.sapportals.wcm.rendering.uicommand.UICommandFactory.getTextAttributesForCommand(UICommandFactory.java:1272)
     at com.sapportals.wcm.rendering.uicommand.UICommandFactory.setPropertiesForCommand(UICommandFactory.java:372)
     at com.sapportals.wcm.rendering.uicommand.UICommandFactory.createExecCommand(UICommandFactory.java:421)
     at com.sapportals.wcm.rendering.uicommand.UICommandFactory.decodeTargetCommand(UICommandFactory.java:620)
     at com.sapportals.wcm.rendering.control.cm.MenuBarControl.onExecute(MenuBarControl.java:319)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.wdf.stack.Control.dispatchHtmlbEvent(Control.java:386)
     at com.sapportals.wdf.WdfEventDispatcher.dispatch(WdfEventDispatcher.java:176)
     at com.sapportals.wdf.WdfCompositeController.onWdfEvent(WdfCompositeController.java:539)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.htmlb.page.DynPage.doProcessCompositeEvent(DynPage.java:204)
     at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:142)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
     at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
     at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:77)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi Luc,
I'm having this same problem in our company.
Our version is also NW2004s SPS11.
Do you still remember what patch you applied to make it work?
It'd be very useful!
Kind regards,
Simone
Message was edited by:
        Simone Teshirogui

Security update 3.6.14 causes Java Error Cache warning when uploading to a distance learning site (Blackboard). How do I uninstall the update?

Sorry, I can't give you a screen shot of the error windows that pop up when I'm having this trouble. Only the text pastes.

https://bugzilla.mozilla.org/show_bug.cgi?id=629030

Error in vi when searching for fieldpoints

Hello,
I changed the range of a Analog Input channel in my .iak file in the MAX. And since then I got an error when I'm selecting "Search..." in a FielPoint IO-channel element in my .vi. But the FieldPoint IO-channel elements I configured before in the same file are still working.
Does somebody know this problem?
I attached two pics with the problem..
Attachments:
error_labview1.gif ‏41 KB
error_labview2.gif ‏39 KB

Hey,
Did you try to delete the .iak file and create a new one?
Christian

Error In BDC when uploading for tcode FS00

Similar Messages

Maybe you are looking for