Query on sqlnet.log
Hi Experts,
Whenever any network issues or something happens so that connection between client and Oracle server has lost.
Can that information store in client sqlnet.log file or do need to set some settings so that it'll write into sqlnet.log.
Why i am asking this is we have an issues today i got one error
ORA-12571 - TNS: Packet Writer Failure
in one of our process log file. So want to know is this a network issues or any other issues ??
1009072 wrote:
Hi Sybrand,
Thanks for your quick response. I have below one concern
Errors, orginating at the client, automatically are written to sqlnet.log
i dont see any sqlnet.log file in client ORACLE_HOME/network/admin location. That means from client side everything was ok when the issue occurred ??
sqlnet.log files aren't always written to ORACLE_HOME/network/anything. I've seen them show up in the 'current' directory of the client process that created the error.
Similar Messages
-
With the error message in my sqlnet.log,what can I do?
I am installing Oracle IAS Today in my win2000 server system.When I restart my computer,I fond these message in the sqlnet.log file :
Fatal NI connect error 12515, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=yfz)(PORT=1521))(CONNECT_DATA=(SERVER=SHARED)(SERVICE_NAME=mouse)(PRESENTATION=http://admin)(CID=(PROGRAM=D:\Program Files\Oracle\jre\1.1.7\bin\jrew.exe)(HOST=YFZ)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.1.7.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.1.7.0.0 - Production
Time: 25-1TB -2002 16:02:39
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12564
TNS-12564: TNS#:>\>xA,=S(refuse connect)
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
What the problem is ?
Any help appreciate!The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Fatal NI connect error 12203 resulting huge increase in sqlnet.log file
Hi,
I am getting the following error message in SQLNET.LOG file on the client machine. This is my upload program which takes few hours to complete and during the program run, the size of SQLNET.LOG file keeps on increasing and goes to 100's of MB and it contains only this error repeatedly.
But my program gets connected to Database and does the upload. But the size of SQLNET.LOG file grows like anything. Pls let me know what's going wrong.
ERROR in SQLNET.LOG File -
Fatal NI connect error 12203, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle80)(ARGV0=oracle80ORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\ORAWIN95\BIN\IFRUN60.EXE)(HOST=IT_DBA)(USER=IT))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.0.5.0.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.0.4.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.0.5.0.0 - Production
Time: 06-MAR-03 12:37:08
Tracing not turned on.
Tns error struct:
nr err code: 12203
TNS-12203: TNS:unable to connect to destination
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 102
TNS-00102: Keyword-Value binding operation error
nt secondary err code: 0
nt OS err code: 0
Regards,
Mitesh V.Hi,
Actually I thought this error is appearing in only one of the machines, but when I am figuring out, I found the same error in almost all the client machines.
Though the programs are running fine getting the database connectivity, I am not able to find why it is giving error showing connection through BEQ protocol.
Pls someone tell me why this is happening and how I will find out which protocol it is using.
Regards,
Mitesh Vijayvargiy -
Very Urgent, sqlnet.log, nmi.log file sizes
Hi all,
Please here my dabatabase server c drive almost full, the machine became very slow, i want to reduce any files thus giving some free space, i found sqlnet.log, nmi.log files are aeach 600 MB, my server database is 24 * 7, OLTP.
is there nay chance i can delete this? or replace with with two empty file with same names overwriting them and restart the server?
what are the problems if i do so? anybody tell whjat i should do?
THnks in advanceHi,
You can check the path of the system tablespace files from the DBA_DATA_FILES view. But to change that from C: to D: you will need downtime. This activity can only be done at the mount stage.
First identify which tablespace is being hit the most. Add a datafile to that tablespace in the D: so that the load can be balanced between C: and D:.
If SYSTEM is one of those tablespaces then add a datafile in D: for SYSTEM tablespace like this
ALTER TABLESPACE SYSTEM
ADD DATAFILE 'D:\.....' SIZE 100M AUTOEXTEND ON MAXSIZE 2048M;
You do not require a restart for this; It can be done online.
Before you could do the above activity I suggest you try to free up some space on C: inself. Check if the alert log is on C: and has grown in MBs. Check if the archive logs are on C: if your database is in ARCHIVELOG mode. Delete any dump file that you might have created in the past and is not of any use. Clear the Event Viewer in Windows. Empy the Recycle bin. etc.
In a nutshell, MAKE SOME PLACE TO LIVE!
Regards. -
Ora-12514 - sqlnet.log states ora-12564
Oracle 8.1.5 w/Patch level 02 applied
I have come to the end of my rope. I have tried and tried to connect to my database using the following: sqlplus system/manager@mydbname and always get ora-12514. When I look at the sqlnet.log file I find:
Tns error struct:
nr err code: 0
ns main err code: 12564
TNS-12564: TNS:connection refused
etc etc etc
I turned trace on level 6 for the client and I find these items scattered about:
nncpmlf_make_local_addrfile: construction of local names file failed
niotns: Call refused: (DESCRIPTION=(TMP=)(VSNNUM=135286784)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514(EMFI=4))))
nioqper: error from nscall
etc etc etc
I am so frustrated. Somebody please help.
Randy
nullHi Randy,
I got the same problem and I fixed it using the "netasst" (for
solaris) or Net8 Assistant (for windows).
Within the Assistant select your Service Naming (mydbname as in
your exemple), in the right site check the "Use Oracle8i Release
8.0 Compatible Identification" box. This will enable the SID
field, enter there your "mydmname" and save this new
configuration.
Exit the Assistant and test your connect string.
I hope this will fix your problem.
Regards,
Jeferson
[email protected] -
Sqlnet.log file creation permissions
One of my sites has a sqlnet.log file that has been symlinked to /dev/null and we are trying to determine if this has caused the issue with /dev/null's permissions being reset to 660 instead of 666.
It looks like the other sqlnet.log files that are not symlinked to /dev/null are 640 so we are not sure this is the issue.
Does anyone know if oracle changes permissions on the sqlnet.log file at creation or access time? And how it might change those permissions?
This is on Oracle 10g running on RHEL4
edit: I typed sqlnet.ora instead of sqlnet.log ... oops.
Edited by: user12198769 on Nov 10, 2009 7:35 AMlooks to be just the default in that file:
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
There are several sqlnet.log files in other places on the server yet there is only one oracle home on here so is there another location that has sqlnet.ora info? -
Got error in sqlnet.log TNS-12535: TNS:operation timed out
connection not getting from client machine to database. got error in sqlnet.log
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 15-MAR-2010 17:09:30
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.20.237.14)(PORT=1879))
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 15-MAR-2010 17:53:26
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.20.237.14)(PORT=2045))
even no any parameter set in sqlnet.orahi,
Please check the connectivity from server to client.
And also check whether the tnsnames.ora file has the TNS entry of the DB server which you are trying to connect.
Then TNSPING the server with tns name.
If this also doesnt work try commenting all lines in sqlnet.ora file on server.
Check the listener status also on the server. -
Is there a way I can control (using OCI) the directory where the sqlnet.log file is being created. In our application the user can change the current directory and hence the sqlnet.log files appear all over the place.
We'd like to have all log files for this application in the same directory so setting the LOG_DIRECTORY_CLIENT in sqlnet.ora is not an option (as this changes the log for all applications).An OCI application creates SQLNET LOGs in the current directory by default.
However the SQLNET can be trapped by OCI calls and put into Applications LOGs -
Querying for users logged into attendant console with AXL (help)
I am wondering if anyone knows of any AXL commands that can be used to query who is logged into attendant console? I know that there is a perfmon counter that will tell you how many users are logged in but there is no other detail beyond that. Any help would be greatly appreciated! Thank you in advance for the assistance.
So after speaking with O365 Support and examining the Activesync Logs (hold down control, rt. click on the exchange tray app bottom right corner of the screen, click Test ActiveSync) we were able to see outlook trying our on-premise exchange servers first.
Despite failing on them, and moving on to activesync.outlook.com, it still would not mount the O365 mailbox & shared mailboxes appropriately. If we set DNS to manual on the workstation to publics, the problem would go away.
Disabling SCP by running the following command on both our exchange servers fixed the issue:
Set-ClientAccessServer -Identity “SERVERNAME” -AutoDiscoverServiceInternalUri $NULL
Credit to AgileIT! Here's the complete reference: http://www.agileit.com/news/outlook-profile-autodiscover-service-order-of-precedence-and-disabling-scp-for-hosted-exchangeoffice-365-migrations/
4 Hours dealing with this issue. -
Hello,
We are seeing a lot of log messages like the one below when an MDO select query is run. There is a message for every numeric column. There doesnt seem to be any issue with the queries working properly its just creating a lot of log messages. Has anyone else had this issue?
Exception of type com.sap.sql.log.OpenSQLException caught:
Cannot fetch column 22, which has JDBC type DOUBLE, into a Java variable of type
float..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Cannot fetch
column 22, which has JDBC type DOUBLE, into a Java variable of type float.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:83) ...Hi Christian,
You are right. As in your case it is a select query it does not reflect the error automatically. In my case, I had an insert query so it failed then and there, which was easier to debug and fix.
I have one question regarding your case. When you read the MDO using the query, what do you do with the output? Do you assign it to any local/transaction property in the output links of the query block or in a proceeding assignment block?
Because, the error mentions that the assignment of float to double datatype fails. So, in theory there should be some assignment done with the output.
Please check if you could figure out this part in your transaction.
Regards,
Saumya Govil -
Query apache access logs for Vists, Visit duration
I need help in querying for Vists, Visit duration in mins ..etc from apache access logs. A Visit is considered new if time difference between requests is greater than 60 mins.
ID VISITS VISIT-DURATION-MINS
'Usr-A' 3 112
'Usr-B' 2 34
My data is as below:
ID,TIME-HR-MIN
'Usr-A','01/01/2012 00:45'
'Usr-A','01/01/2012 00:49'
'Usr-A','01/01/2012 00:53'
'Usr-A','01/01/2012 01:04'
'Usr-A','01/01/2012 01:05'
'Usr-A','01/01/2012 01:09'
'Usr-A','01/01/2012 01:10'
'Usr-A','01/01/2012 01:11'
'Usr-A','01/01/2012 01:13'
'Usr-A','01/01/2012 01:14'
'Usr-A','01/01/2012 01:15'
'Usr-A','01/01/2012 02:00'
'Usr-A','01/01/2012 02:01'
'Usr-A','01/01/2012 02:19'
'Usr-A','01/01/2012 03:53'
'Usr-A','01/01/2012 03:59'
'Usr-A','01/01/2012 04:07'
'Usr-A','01/01/2012 04:11'
'Usr-A','01/01/2012 16:30'
'Usr-A','01/01/2012 16:37'
'Usr-A','01/01/2012 16:38'
'Usr-A','01/01/2012 16:39'
'Usr-B','01/01/2012 01:45'
'Usr-B','01/01/2012 01:46'
'Usr-B','01/01/2012 01:48'
'Usr-B','01/01/2012 01:49'
'Usr-B','01/01/2012 01:50'
'Usr-B','01/01/2012 02:07'
'Usr-B','01/01/2012 02:08'
'Usr-B','01/01/2012 02:09'
'Usr-B','01/01/2012 02:10'
'Usr-B','01/01/2012 05:21'
'Usr-B','01/01/2012 05:23'
'Usr-B','01/01/2012 05:30'Hello
I think this gives you what you need, although I think Usr-A has a total of 121 minutes not 112...
with visit as
( select 'Usr-A' id,TO_DATE('01/01/2012 00:45','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 00:49','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 00:53','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:04','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:05','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:09','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:10','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:11','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:13','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:14','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 01:15','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 02:00','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 02:01','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 02:19','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 03:53','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 03:59','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 04:07','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 04:11','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 16:30','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 16:37','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 16:38','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-A' id,TO_DATE('01/01/2012 16:39','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 01:45','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 01:46','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 01:48','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 01:49','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 01:50','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 02:07','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 02:08','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 02:09','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 02:10','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 05:21','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 05:23','dd/mm/yyyy hh24:mi') time_hr_min from dual union all
select 'Usr-B' id,TO_DATE('01/01/2012 05:30','dd/mm/yyyy hh24:mi') time_hr_min from dual
SELECT
id,
COUNT(*) num_visits,
SUM(visit_time) total_visit_time
FROM
SELECT
id,
SUM(visit_time) * 60 visit_time
FROM
SELECT
id,
time_hr_min,
visit_time,
MAX(marker)OVER(PARTITION BY id ORDER BY time_hr_min) marker
FROM
( SELECT
id,
time_hr_min,
CASE
WHEN visit_dur > 1
THEN
0
ELSE
visit_dur
END visit_time,
CASE
WHEN rn = 1
THEN
1
WHEN visit_dur > 1
THEN
rn
END marker
FROM
( SELECT
id,
time_hr_min,
ROW_NUMBER() OVER(PARTITION BY id ORDER BY time_hr_min) rn,
(time_hr_min - LAG(time_hr_min) OVER( PARTITION BY
id
ORDER BY
time_hr_min)
) * 24 visit_dur
FROM
visit
GROUP BY
id,
marker
GROUP BY
id
ORDER BY
id
ID NUM_VISITS TOTAL_VISIT_TIME
Usr-A 3 121
Usr-B 2 34
2 rows selected. HTH
David -
Auto Pay Program : query in Additional Log Tab page in F110
Hello Experts,
In T-Code F110, on Additional Log Tab page, could you please explain for whats the purpose these check boxes, their meaning/importance & when all/each one of them could be used :
1. Due date check
2. Payment method selection in all cases
3. Pmnt method selection if not successful
4. Line items of payment documents
This something which worrying me & i request your help.Hi,
These check boxes determine what to be written on to the logs.
For instance, if 'Due date check' is ticked, and if an invoce does not meet the criteria, it will be written on the logs. But, if it is not checked, such data will not be available in the logs.
Regards,
Sridevi -
Query on available.log file process list
Hi gurus,
I am aware that available.log is the file where we can see the status of the monitored process for an instance and it is located in work directory.
I also guess it is not 100% reliable.
I would like to know what are the monitored process for available.log in a solaris environment.
the process monitored in the list are getting stop/started frequently.
I would like to check which processes are those .
Thanks,
SowmyaHi Sunny,
Thanks for your info.
This file is getting updated frequently .
that means the processes are getting restarted frequently , isn't it?
Please find the details from the log ::
Available 29.07.2010 14:45:22 - 29.07.2010 14:45:22
Unavailable 29.07.2010 14:45:27 - 29.07.2010 14:45:27
Available 29.07.2010 14:46:23 - 29.07.2010 14:46:23
Unavailable 29.07.2010 14:46:27 - 29.07.2010 14:46:27
Available 29.07.2010 14:47:23 - 29.07.2010 14:47:23
Unavailable 29.07.2010 14:47:27 - 29.07.2010 14:47:27
Available 29.07.2010 14:48:23 - 29.07.2010 14:48:23
Unavailable 29.07.2010 14:48:27 - 29.07.2010 14:48:27
Available 29.07.2010 14:49:23 - 29.07.2010 14:49:23
Unavailable 29.07.2010 14:49:27 - 29.07.2010 14:49:27
Available 29.07.2010 14:50:23 - 29.07.2010 14:50:23
Unavailable 29.07.2010 14:50:27 - 29.07.2010 14:50:27
Available 29.07.2010 14:51:23 - 29.07.2010 14:51:23
Unavailable 29.07.2010 14:51:27 - 29.07.2010 14:51:27
Available 29.07.2010 14:52:23 - 29.07.2010 14:52:23
Unavailable 29.07.2010 14:52:27 - 29.07.2010 14:52:27
Available 29.07.2010 14:53:23 - 29.07.2010 14:53:23
Unavailable 29.07.2010 14:53:27 - 29.07.2010 14:53:27
But the server is up and running fine .
Is this file 100% reliable?
Or can it be a bug somewhere ,for ex may be kernel bug which is updating the file incorrectly? -
大部分中间件服务器瞬间连不上大部分核心数据库,以下是其中一台db的报错日志:
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production
Time: 30-AUG-2012 11:20:00
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 78
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.131.39.78)(PORT=41574))
查询了metalink文档Metalink文档ID 1384945.1。说可以根据nt main err code: 505来直接判断属于network的问题。不知道大家有什么看法,好像只是根据nt main err code: 505来判断,是不是有点证据不足?ALERT.LOG ,LISTENER.LOG 同一时间点的日志以code形式贴出来
或者
如果需要发送附件,可以直接发邮件到 [email protected] -
I am using flat file GTC connector for reconciling the user records. Is it possible to have separate log file for GTC since I need to ascertain which are the user records which have failed and for what reason. Could you please help me how to configure separate logging for GTC or suggest an alternate approach.
Thanks Rajiv,
are you suggesting to read failed events from database using OIM API ? or we another way or procedure?
Thanks,
Maybe you are looking for
-
Photoshop CC 2014 for PC will not copy or paste
Running: Photoshop CC 2014 for PC Windows 8.1 Pro, R2 64 bit, AMD FX3 8350 with 16GB RAM. 75% of RAM free Photoshop CC 2014 for PC will not copy or paste. When I create a line of text and want to copy and paste the text in the same document, the copy
-
Hello, We have a report that is working on the development and the production server. I just downloaded the Report Builder version 7.0.1 When I change the report (move a filed from one pixel left) and save it, the server returns an error: The report
-
Photoshop Elements 7 Editor Error & 10 trial error
Photoshop Elements 7 Editor Error Hello, Yesterday I did a clean install of Windows 7 (x64) on my PC & have completely updated it through Windows Updater, I than installed PSE7 (disk that I brought new 3 years ago & has worked fine up till now) & fol
-
How do I burn a dvd in Premiere pro cs4
Hi all, How do I burn a dvd in premiere without having to launch encore? I don't need menus or other dvd navigation features. Thanks for all your help Elio
-
Middle-click for pasting not working
I'm not too sure what the problem is, but here's my setup: I've got X installed, with a minimal .xinitrc for wmii (following https://wiki.archlinux.org/index.php/Wmii) Right now, it's really just until wmii; do true done I've got the following in /et