Query on using attribute bindings in popup

Hi,
Am using Jdev 11g. Data controls are created using plain java objects.
Use case is as follows:
I have a tree table which displays records (Say employee records).
Now i select a row in tree table and click "Edit" button. The details for the selected employee should be displayed in pop up window.
Approach followed by me:
1. Created a tree table using declarative bindings.
2. On click of Edit, i invoke pop up using "Show Popup Behavior" operation.
3. The pop up component consists of form layout with Employee attributes. (Basically Employee object returned by method getEmployeeById(int empId) is mapped to UI components)
Am setting parameter empId for method getEmployeeById as follows in Edit action binding dialog: ${bindings.<Tree Iterator name>.currentRow.dataProvider.empId}
Can anyone suggest as to what is incorrect over here/better way of implementing this? I am avoiding the approach where in the methods are invoked explicitly in managed bean.
Regards
Navin

Hi,
I was able to get the selected row value for paramter binding using following expression.
${bindings.<Tree Iterator name>.currentRow.dataProvider.empId}
But now i see that, in case i select a record at level 1 in tree, the above expression returns the selected PARENT record information.
Ex:
Emp1
------Emp1-C1
------Emp1-C2
Emp2
Emp3
Above expression works fine when i select either Emp1, Emp2 or Emp3. But when i select Emp1-C1 or Emp1-C1, expression returns Emp1.
Any suggestions ?
Thanks
Navin
Edited by: user10593915 on Mar 10, 2009 11:32 PM

Similar Messages

How to find out Query last used by whom

Dear All,
Can any one tell me that "How to find out the Query last used by whom. I have already searched in SDN but no luck. In my system BW Stats are not installed and I have already checked the below tables.
RSZELTDIR - Directory of the reporting component elements
RSZELTTXT - Texts of reporting component elements
RSZELTXREF - Directory of query element references
RSRREPDIR - Directory of all reports (Query GENUNIID)
RSZCOMPDIR - Directory of reporting components
RSZRANGE - Selection specification for an element
RSZSELECT - Selection properties of an element
RSZELTDIR - Directory of the reporting component elements
RSZCOMPIC - Assignment reuseable component <-> InfoCube
RSZELTPRIO - Priorities with element collisions
RSZELTPROP - Element properties (settings)
RSZELTATTR - Attribute selection per dimension element
RSZCALC - Definition of a formula element
RSZCEL - Query Designer: Directory of Cells
RSZGLOBV - Global Variables in Reporting
RSZCHANGES Change history of reporting components
I am able to find out the Date and time but not the user name. So could you please help on this.
Regards
Sankar

i think u have missed it.
RSZCOMPDIR IS THE ONLY TABLE WHICH PROVIDES THE DATA.
ENTER TECHNICAL QUERY Name in RSZCOMPDIR-COMPID.
RSZCOMPDIR-TSTNAM gives you the user id of sap bw user who made the change.
RSZCOMPDIR-TSTPDAT gives you date on which change was made .
RSZCOMPDIR-TSTPTIM gives you timestamp on which change was made .
all users details can be obtained from TCODE SU01 where you need to enter sap user id.
You can also get user name( description) by using tcode SE09 and entering above sap user id.

What are the Query criterion property attributes to search for KB's in SCCM 2012

A client is ask what servers might have a particular hotfix(ex: KB2798040) installed. The Hotifx is not in our WSUS catalog because it is not a critical security patch so it is not downloaded. What is the SCCM 2012 R2 Query criterion property attributes
to find a particular KB?

Depending on the OS of the client, that information may not be collected by default.
Rather than collecting all of the HotfixID class, instead, consider using DCM for this single HotfixID.
Sherry has previously posted about ways to do this,
http://myitforum.com/cs2/blogs/skissinger/archive/2011/08/17/non-security-hotfix-detection-for-windows-7-2008.aspx
and here's a post by Nick which seems to be based on the very same approach:
http://t3chn1ck.wordpress.com/2010/10/20/sccm-dcm-inventory-for-installed-windows-hotfixes/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me <b>How can i fetch records from 3 tables with a single query without using joins</b>
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

WebCenter Sites Query Content using API

Hi all,
I have created a asset called "TVLContent" and for this asset, I created 2 attributes: "Question" and "Answer".
I need to create a query search using API, to get any content where "Question" or "Answer" attribute contains "Why".
I'm using the line code below, for searching, but doesn't work.
-----Code
Session ses = SessionFactory.getSession();
Condition c1 =ConditionFactory.createCondition("Question", OpTypeEnum.LIKE, "%Why%");
Condition c2 =ConditionFactory.createCondition("Answer", OpTypeEnum.LIKE, "%Why%" );
Query query = new SimpleQuery( "TVLContent", "FAQs", c1.or(c2) , Arrays.asList("name", "id", "Question", "Answer"));
query.getProperties().setIsBasicSearch(true);
AssetDataManager mgr = (AssetDataManager) ses.getManager(AssetDataManager.class.getName());
List<Long> firstResults = new ArrayList<Long>();
for(AssetData data : mgr.read(query)) {
//read data, e.g. data.getAttributeData("Question").getData()
------Code
If I change the query condition to c1 only, the query works fine,
e.g. Query query = new SimpleQuery( "TVLContent", "FAQs", c1 , Arrays.asList("name", "id", "Question", "Answer"));
If I change the query condition to c2 only, the query works fine.
e.g. Query query = new SimpleQuery( "TVLContent", "FAQs", c2 , Arrays.asList("name", "id", "Question", "Answer"));
But when I create a new condition (c1.or(c2)) doesn't work.
e.g. Query query = new SimpleQuery( "TVLContent", "FAQs", c1.or(c2) , Arrays.asList("name", "id", "Question", "Answer"));
How to fix this?
What's the best way to create this query using API?
See below the attribute definition:
Name: Question
Attribute Type: text
Attribute Editor: TVLTextArea
TVLTextArea XML (
<?XML VERSION="1.0"?>
<!DOCTYPE PRESENTATIONOBJECT SYSTEM "presentationobject.dtd">
<PRESENTATIONOBJECT NAME="TEXTAREA">
<TEXTAREA WRAPSTYLE ="SOFT"></TEXTAREA >
</PRESENTATIONOBJECT>
Name: Answer
Attribute Type: text
Attribute Editor: TVLCKEditor
TVLCKEditor XML (
<?XML VERSION="1.0"?>
<!DOCTYPE PRESENTATIONOBJECT SYSTEM "presentationobject.dtd">
<PRESENTATIONOBJECT NAME="TEXTAREA">
<TEXTAREA WRAPSTYLE ="SOFT"></TEXTAREA >
</PRESENTATIONOBJECT>
}

Hello,
Can you share the condition which you are trying to pass?
Try something like this example;
Condition condition = ConditionFactory.createCondition( <ATTRIBUTE NAME>, OpTypeEnum.EQUALS, <ATTRIBUTE VALUE> );
List<String> attributes = new ArrayList<String>();
attributes.add(<ATTRIBUTE NAMES>); // add as many as required
SortOrder sortOrder = new SortOrder(<Attribute Name to sortby>, <ORDER - Ascending or Descending>);
Query query = new SimpleQuery( <Asset Type>, null, condition, attributes, Collections.singletonList(sortOrder));
for( AssetData data : assetDataManager.read( query ) ) {
// get all the data as mentioned here: http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/asset_api_tutorial.htm#WBCSD2395
Note: Import correct classes in your template or CSElement.
Regards,
Guddu

Filtering in query through navigational attribute.

Hi all,
I want to restrict my query on the basis of navigational attribute (Material Type) of my info object (0Material) in query designer but when i drag material attribute in Filter tab page it doest work and does not appear in filter tab.
Please help me how can i restrict this in this manner.

if it is selected, then in query, drag drop 0material___type infoobject.. do not use attribute under 0material.. you can find this in the same dimension as of 0material.

Query Filter on attribute

Hi,
I am designing the BEx Query that requires the data to be filtered based on the attribute value of an infoobject - both are available in the BEx Query.
However when I apply the Filter on the same infoobject in the BEx Query, it does not return me any data as result.
Can you please let me know if there is a better way to filter Query Results based on attribute of a characteristic.
Regards,
Amogh

Goto RSD1 > Infoobject Maintainence > Key in your Infoobject name & check the /BIC/M* table. Find all entries applicable for restriction. Make sure all the existing entries are same as that is visible at Info provider level. In BEx, if you are sure you are not going to make changes to query frequently, use Filters at Query level. Include all relevant entries you find applicable for your Characteristic Info object. As suggested in previous posts you need a Navigational Attribute for your Info object; if you want to capture Attribute data. Else, if you wish to create a filter at run time, use an input enabled Variable, which can capture Multiple Entries.

How to use attributes from different context nodes in one view?

I am VERY new to the concept of CRM and currently working on creating an alternate version of the BP_HEAD_SEARCH. With help from SAPPRESSs book 'SAP CRM Web Client' i was ble to create my own simple Z-component.
However after going back and forth the book and the forum (including this [article|https://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]) i was not able to find a solution to my problem. My current search uses BuilHeaderAdvancedSearch as context node for searching. But the search should also be able to use attributes from BuilActivity, which is directly related to BuilHeader. I can't seem to find a way to get attributes from BuilActivity into the search window of my component without having to change SAP-Standard.
Is this really the only way? Please advise on possible code and insertion point.

Any suggestions?

Can I refactor this query to use an index more efficiently?

I have a members table with fields such as id, last name, first name, address, join date, etc.
I have a unique index defined on (last_name, join_date, id).
This query will use the index for a range scan, no sort required since the index will be in order for that range ('Smith'):
SELECT members.*
        FROM members
        WHERE last_name = 'Smith'
        ORDER BY joindate, idIs there any way I can get something like the following to use the index (with no sort) as well:
SELECT members.*
        FROM members
        WHERE last_name like 'S%'
        ORDER BY joindate, idI understand the difficulty is probably; even if it does a range scan on every last name 'S%' (assuming it can?), they're not necessarily in order. Case in point:
Last_Name: JoinDate:
Smith          2/5/2010
Smuckers     1/10/2010An index range scan of 'S%' would return them in the above order, which is not ordered by joindate.
So is there any way I can refactor this (query or index) such that the index can be range scanned (using LIKE 'x%') and return rows in the correct order without performing a sort? Or is that simply not possible?

xaeryan wrote:
I have a members table with fields such as id, last name, first name, address, join date, etc.
I have a unique index defined on (last_name, join_date, id).
This query will use the index for a range scan, no sort required since the index will be in order for that range ('Smith'):
SELECT members.*
FROM members
WHERE last_name = 'Smith'
ORDER BY joindate, idIs there any way I can get something like the following to use the index (with no sort) as well:
SELECT members.*
FROM members
WHERE last_name like 'S%'
ORDER BY joindate, idI understand the difficulty is probably; even if it does a range scan on every last name 'S%' (assuming it can?), they're not necessarily in order. Case in point:
Last_Name: JoinDate:
Smith          2/5/2010
Smuckers     1/10/2010An index range scan of 'S%' would return them in the above order, which is not ordered by joindate.
So is there any way I can refactor this (query or index) such that the index can be range scanned (using LIKE 'x%') and return rows in the correct order without performing a sort? Or is that simply not possible?Come on. Index column order does matter. "LIKE 'x%'" actually is full table scan. The db engine accesses contiguous index entries and then uses the ROWID values in the index to retrieve the table rows.

How to write a SQL Query without using group by clause

Hi,
Can anyone help me to find out if there is a approach to build a SQL Query without using group by clause.
Please site an example if is it so,
Regards

I hope this example could illuminate danepc on is problem.
CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
CREATE OR REPLACE FUNCTION GET_ARR return my_array
as
     arr my_array;
begin
     arr := my_array();
     for i in 1..10 loop
          arr.extend;
          arr(i) := i mod 7;
     end loop;
     return arr;
end;
select column_value
from table(get_arr)
order by column_value;
select column_value,count(*) occurences
from table(get_arr)
group by column_value
order by column_value;And the output should be something like this:
SQL> CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
2 /
Tipo creato.
SQL>
SQL> CREATE OR REPLACE FUNCTION GET_ARR return my_array
2 as
3   arr my_array;
4 begin
5   arr := my_array();
6   for i in 1..10 loop
7    arr.extend;
8    arr(i) := i mod 7;
9   end loop;
10   return arr;
11 end;
12 /
Funzione creata.
SQL>
SQL>
SQL> select column_value
2 from table(get_arr)
3 order by column_value;
COLUMN_VALUE
           0
           1
           1
           2
           2
           3
           3
           4
           5
           6
Selezionate 10 righe.
SQL>
SQL> select column_value,count(*) occurences
2 from table(get_arr)
3 group by column_value
4 order by column_value;
COLUMN_VALUE OCCURENCES
           0          1
           1          2
           2          2
           3          2
           4          1
           5          1
           6          1
Selezionate 7 righe.
SQL> Bye Alessandro

Unable to parse query when using dblink in forms 4.5

Hi,
I have created a query that uses a DBlink because I need to do query on a table located on another dbase. I've used the query on creating my report using Reports 6i. The report needs to be called from a menu on our system, which was developed under Developer 2000 (forms 4.5). The problem is, when I tried to access the report from the menu, it returns the error 'unable to parse query'. What I did after getting error was to create a dummy module using Forms 6i, and call my report from there. It worked fine.
By the way, the table that I'm accessing using the dblink is under Oracle 9i dbase, and the dbase of the system that I've been working at is Oracle 8i.
I don't have any idea on what's causing this error. Is there a compatibility issue when using a dblink located in Oracle 9i database with forms 4.5?
Thanks!

Hello,
Not sure if it is the good answer, but I know that Forms does not recognize dblink and owner.object syntax. You have to create a simple synomym that point to the distant object and use this synonym within Forms.
Francois

WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER

Dear Sir,
please any one can answer me as soon as possible its very urgent
WEB BASED MAPPING APPLICATION TO DEVELOP QUERY UTILITY USING MAPVIEWER
I     As oracle mapviewer Chapter 8 (Oracle Maps) says generating our own Web based mapping application we are trying to generate our own maps for our own data contains in our layers like example boundary lines and roads and etc. and we are following complete example as described in Oracle Mapviewer Document Chapter 8.
Before this step we tried with demo data downloaded from OTN mvdemo. And we downloaded latest demo today itself from the OTN and imported into our database schema called mvdemo. And we copied all three jar files mvclient and mvconnection and mvpalette into our jdeveloper .
II.     We created a jsp to execute the following code from oracle mapviewer chapter 8 documents
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/customizable" prefix="cust"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jwcache.tld"
prefix="jwcache"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/fileaccess.tld"
prefix="fileaccess"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/jesitaglib.tld"
prefix="JESI"%>
<f:view>
<html>
<head>
<META http-equiv="Content-Type" content="text/html" charset=UTF-8>
<TITLE>A sample Oracle Maps Application</TITLE>
<script language="Javascript" src="jslib/loadscript.js"></script>
<script language=javascript>
var themebasedfoi=null
function on_load_mapview()
var baseURL = " http://localhost:8888/mapviewer/omserver";
// Create an MVMapView instance to display the map
var mapview = new MVMapView(document.getElementById("map"), baseURL);
// Add a base map layer as background
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
// Add a theme-based FOI layer to display customers on the map
themebasedfoi = new MVThemeBasedFOI('themebasedfoi1','mvdemo.customers');
themebasedfoi.setBringToTopOnMouseOver(true);
mapview.addThemeBasedFOI(themebasedfoi);
// Set the initial map center and zoom level
mapview.setCenter(MVSdoGeometry.createPoint(-122.45,37.7706,8307));
mapview.setZoomLevel(4);
// Add a navigation panel on the right side of the map
mapview.addNavigationPanel('east');
// Add a scale bar
mapview.addScaleBar();
// Display the map.
mapview.display();
function setLayerVisible(checkBox){
// Show the theme-based FOI layer if the check box is checked and
// hide the theme-based FOI layer otherwise.
if(checkBox.checked)
themebasedfoi.setVisible(true) ;
else
themebasedfoi.setVisible(false);
</script>
</head>
<body onload= javascript:on_load_mapview() >
<h2> A sample Oracle Maps Application</h2>
<INPUT TYPE="checkbox" onclick="setLayerVisible(this)" checked/>Show customers
<div id="map" style="width: 600px; height: 500px"></div>
</body>
</html>
</f:view>

<%-- oracle-jdev-comment:auto-binding-backing-bean-name:backing_mapPage--%>
III.     When we run this jsp it’s giving us following Two errors
1     Error:     ‘MVMapView’ is undefined
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
2     Error:     ‘themebasedfoi’ is null or not an object
     Code:     0
     URL:     http://192.168.100.149:8988/MapViewerApp-WebProj-context-root/faces/mapPage.jsp
Please let us know what could be problem as soon as possible. Very urgent
Please let us know where we can find Mapviewer AJAX API’s for Jdeveloper Extention
Thanks
Kabeer

I currently use parameters, and they are passed from the form to the report. Report is then generated based on a function returning ‘strongly typed’ cursor. The ‘strongly typed’ cursor in my case returns a record consisting of an orderly collection of fields.
This collection of fields is returned by another function that relies on the IF … THEN logic.
However, the number of IF ... THEN statements is quite large (currently 64 covering all possible combinations of 6 parameters available in the form).
I would like to avoid the large number of IF … THEN statements, and hope that there is a way of passing a string to a query, where the Dynamic SQL would in Select close and Where close reflect parameters passed by the form.
In addition to this I would like to avoid creating and populating a table or a view dedicated to the report, because this may lead to a conflict in case of multiple users concurrently generating reports with different choice of parameters.
Edited by: user6883574 on May 28, 2009 9:16 PM

How to set input/output "use" attribute in the WSDL file of BPEL process?

Hello,
I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process).
I wrote manually the corresponding WSDL file for my BPEL process, where I stipulated for the operations exposed by my process ( in <soap:binding> tag) the value of the attribute "style" to "rpc". Also, for each <input> and <output> of the operations (inside the <operation> tag), I set manually the attributes "use" to the values "encoded". Something like this:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers"/>
<input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</input>
<output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</output>
</operation>
The issue is that, when the BPEL process is built and deployed, the WSDL file generated automatically by BPEL (based on the one manually writen) set the values of the "use" attributes to "literal". This is what is generated:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers" />
<input>
<soap:body use="literal" namespace="http://acm.org/samples" />
</input>
<output>
<soap:body use="literal" namespace="http://acm.org/samples" />
</output>
</operation>
Is there any chance to keep the original values (written by hand) for the "use attributes?
Many thanks in advance!
Regards,
Marinel

I am not sure I understand your question. If you want all your BPEL service to be rpc still by default, you can change the templates: C:\eclipse\plugins\bpelz_0.9.XXX\templates.
The BPEL PM engine support both style of invocation.
I hope this helps. -Edwin

Error while querying workflow message attributes for task

Can some one please help me with this error?
I get this error when I submit a task in worklist app. I have figure out that it is causing due to one payload in the table in the task. If remove that payload I am able to submit the task.
Error while querying workflow message attributes for task a99d1cf3-5e91-4c4a-8660-aeae91bfbec0 with version 5.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services.
oracle.jbo.JboException: Error while querying workflow message attributes.
Error while querying workflow message attributes for task a99d1cf3-5e91-4c4a-8660-aeae91bfbec0 with version 5.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services.
     at oracle.bpel.services.datacontrol.XSDDataControl.invokeOperation(XSDDataControl.java:460)
     at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:430)
     at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
     at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
     at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2144)
     at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:467)
     at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)

Can anybody help me on this?
I did some google but I get this only which is not much helpful.
http://download.oracle.com/docs/cd/E14571_01/core.1111/e10113/chapter_bpm_messages.htm

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Query on using attribute bindings in popup

Similar Messages

Maybe you are looking for