Query regarding short dump
Hi
The runtime error is DBIF_RSQL_INVALID_RSQL and the exception is CX_SY_OPEN_SQL_DB.can anyone explain me these errors.
At this select query it going to short dump.Could anyone help me.Its urgent.
Select aaufnr agstrp agsuzp biedd b~iedz into table i_uncount
from afko as a inner join afru as b on aaufnr = baufnr
for all entries in i_ordscp
where aaufnr = i_ordscp-aufnr and bgrund = 'ONS'
and b~stzhl = '0000000'.
Error Analysis:
The data read during a SELECT access could not be inserted into the target field.
Either the conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
The target field is all correct.I've checked it.
Could anyone please help me.Its really urgent.U'll definitely be given points.
Thanks
chandrika.
Hi Sarath ,
Please look at the internal table decleration and the sequence of fields in select statement .
What is happening is that the select is tying to place the value of iedd into aufpl as a result of which this incompatibilty occurs.
So you can either user into corresponding-fields or modify the sequence of your internal table.
I would sugges the second option , as first can effect the performance.
So just declare the it as
TYPES:BEGIN OF t_uncont,
aufnr like afko-aufnr,
gstrp like afko-gstrp,
gsuzp like afko-gsuzp,
iedd like afru-iedd,
iedz like afru-iedz,
aufpl like afko-aufpl,
END OF t_uncont.
Regards
Arun
Similar Messages
-
Regarding short dump ASSERTION_FAILED
Hi
I tried to delete info object characteristcs from Info object from transaction RSA1. it gives short dump.
pls advice how to avoid this.
"ASSERTION_FAILED" " "
"CL_RSAWBN_OBJ_IOBC_IOBJTREE===CP" or "CL_RSAWBN_OBJ_IOBC_IOBJTREE===CM002"
"GET_IOBC"
Termination occurred in the ABAP program "CL_RSAWBN_OBJ_IOBC_IOBJTREE===CP" -
in "GET_IOBC".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 34
of the (Include) program "CL_RSAWBN_OBJ_IOBC_IOBJTREE===CM002".
is it patch problem ?
Regards
ChandraHI,
Did you saw this?
http://wiki.sdn.sap.com/wiki/display/BI/RuntimeErrorASSERTION_FAILEDinABAPProgramCL_RSAWBN_TREE_VIEW
Regards
Lucas -
Hi all,
whenever im trying to load the data it gives me the shortdump error
plzz sugest wat 2 do
regardsHi Akhilesh,
Try the below steps to sort out the short dump,
1. Goto Monitor --> Status Tab --> using wizard or menu path
--> Environment --> Short dump --> warehouse
2. Select the Error and double clk
Analyze the error message.
3. -->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
4. Refresh the Transactional RFC screen and go to the Data Target which failed and see the status of the Request -->Chk for it to be green.
5. If it does not work there may be bad request if it is that case go to the Data Targets and delete the bad requests and do the update again.
Regards,
Mani -
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
Regarding short dump in program SAPLCNDP with Raise_Exception
Hi all,
I am getting short dump "RAISE_EXCEPTION" in my system .
Exception condition "CNTL_ERROR" raised.
A RAISE statement in the program "SAPLCNDP " raised the exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLCNDP " in
"DP_SYNC_URLS".
The main program was "SAPLSMTR_NAVIGATION ".
The termination occurred in line 31
of the source code of program "LCNDPU40 " (when calling the editor 310).
Needed reply urgently.
Thanks in Advance,
NagamaniIn the shortdump, look for the value of the feature on which the error occurred.. ie the variable FEATURE_ID & try if you can activate that feature using Tcode PE03.
~Suresh -
Need help regarding short dumps in BW
hi all,
We have a problem in our production.Thousands of short dumps have been created in a day stating
"Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB"
=====================
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-14400: inserted partition key does not map to
any partition"
===================
The RSRV check shows "Inconsistency: High value for table /BIC/B0000xxx000: 0002 ; PARTNO value in RSTSODS: 010."
When a repair was run on this table the short dumps stopped.Is there any other steps that should be taken to avoid such dumps in future/is there something that we have missed to maintainin in BW.
Please explain in detail, it will be of great help.
ThanksHi All,
Thanks a lot for the valuable messages.
So when all these stated notes are followed, and if in future if a simillar problem comes, the recovery step would be running the RSRV test and repair on the particular object?
Thanks once again.
Shailaja -
Regarding Short dump while data extraction
Hi All,
We are trying to extract data from DB Connect. When we try to pull the data by giving selections, we are getting short dump.
Name of Run time error.
PERFORM_CONFLICT_TAB_TYPE
Exception Name
CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for this error.Hi Jayanth,
Check these ...
Perform_conflict_tab_type error
Oracle to BW Load Runtime error CX_SY_DYN_CALL_ILLEGAL_TYPE
Raja -
Regarding short dump while loading data
Hi All,
I am loading data using 0FI_GL_4. This is a periodic load which was working fine till March. There are lot of postings that happened in April and period was open till 20th. Now when I am trying to load that for 12th period April. I am getting the following error "ABAP/4 processor: DBIF_RSQL_SQL_ERROR" in short dump.
This is the error analysis:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSEG_CPUDT_DATA" "(FUNCTION)"
I am tried to load data 5 times till now and every time I am getting the same error. I checked with Basis people for the DB space and it is fine.
Why I am suddenly getting this error???Hi,
it looks like an internal table overflow in your source system.
Try reducing the data_package size of your load or ask your basis guys to have a look on short dump and perhaps increase this memory.
Try RSA3 in the source system and see if it works with your data_package size values from BW and see if it works. If not reduce the number of records...
On which plugin release is your system running?
hope this helps,
Oliviier. -
Please help me regarding short dump
iam in lm. one of my process chain getting this this short dumpDBIF_RSQL_SQL_ERROR erroor.Extraction completed but bw side it getting the error showing 0 from XXX redords iam getting this
thanks in advanceHi
You will get this type of Error when you are not having sufficient memory in the Production Server or the Utilization Space is more than 95% you will get the these type of Error
GO to DB02>Space Statistics> Daily > Weekly> Monthly
and also get ST 22 ABAP Dump Analysis if you are facing SOL trace error
you have to inform to the basis people he will check and he add the data file
if it is useful please assign some good points
regards
madan -
Hi Gurus,
When there is short dump is there a systematic procedure to solve the short dump apart from checking in ST22 so that we specify this short dump is error due to BAsis or due to BW .
Is there any thing that?
Please share some knowledge regarding short dumps?For sure its not always R/3 or its not always due to data.
BW: Dump due to Transformation code.
BAsis: Dump due to less table space.But having said its always hard for to identify if its due to table space or due to transformation so if you know how to identify them ,i would appreciate ur help -
Short dump in report generation for bex query
Hi,
I have e newly installed SAP NetWeaver 7.3 and I'm not able to run BEx-Queries. When I start transaction RSRT and try to generate the report for the selected bex query, I get the following short dump:
Category ABAP Programming Error
Runtime Errors RAISE_EXCEPTION
ABAP Program SAPLRRSI
Application Component BW-BEX-OT
If I start the test in RSRV for that query I get:
Generation limits for the generated report
Unable to load report GPEM3XZBL2Y9VX9H6SN
Am I missing a profile parameter for that generartion limits or something else?
Thanks in advance!Hi,
Check whether your SAP GUI is activated and installed correctly.
check following threads
Runtime error RAISE_EXCEPTION has occurred
Dump when activating Business Content 7.35
Thanks and regards
Kiran -
Timeout Short Dump on a Data Query to a blank table.
Hi,
My program gives a short dump on quering a blank table. The dump says timeout.
what could the possible problem be.
regards,Runtime Error TIME_OUT
Occurred on 02/19/2009 at 10:35:35
Time limit exceeded.
What happened?
The program "SAPLE31C" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
After a certain length of time, the program is terminated. In the case
of a work area, this means that
- endless loops (DO, WHILE, ...),
- database accesses producing an excessively large result set,
- database accesses without a suitable index (full table scan)
do not block the processing for too long.
The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The
current setting is 5400 seconds. Once this time limit has been exceeded,
the system tries to terminate any SQL statements that are currently
being executed and tells the ABAP processor to terminate the current
program. Then it waits for a maximum of 60 seconds. If the program is
still active, the work process is restarted.
successfully processed, the system gives it another 5400 seconds.
Hence the maximum runtime of a program is at least twice the value of
the system profile parameter "rdisp/max_wprun_time".
How to correct the error
You should usually execute long-running programs as batch jobs.
If this is not possible, increase the system profile parameter
"rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
(for example);
- Database has an unsuitable index: Check index generation.
You may able to find an interim solution to the problem
~~~~~~~
The line to which it points is a select query on a table that has not records. -
Short Dump While selecting Variant for ABAP query
Hi,
ABAP query is going to short dump (CONNE_IMPORT_WRONG_COMP_LENG) while selecting a Variant. If i create and use variant then i am able to see Output of Variant.But not able to use Earlier created variants .
I think some mismatch between variant values and selection screen fields.Can anyone tell me how to rectify this ?
I am not able to debug the code as dump is coming in a System program(RSDBSPVD).Can anyone tell me which database table i can use to get values of the Variant.
Thanks in Advance.
Nirmala KHi nirmala,
chk the links:
http://help.sap.com/saphelp_webas620/helpdata/en/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/c0/9803a7e58611d194cc00a0c94260a5/content.htm
regards,
keerthi. -
Short Dump for Dynamic Select Query
Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
<t> TYPE table.
DATA: it_fldcat TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details TYPE abap_compdescr_tab,
wa_details TYPE abap_compdescr.
DATA: ref_descr TYPE REF TO cl_abap_structdescr.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
SELECT * INTO TABLE <t>
FROM (p_table)
WHERE (tab_cond)
ORDER BY (tab_ord).
ENDFORM. " GET_CCNUM_2Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
* CLEAR wa_it_fldcat.
* wa_it_fldcat-fieldname = wa_details-name .
* wa_it_fldcat-datatype = wa_details-type_kind.
* wa_it_fldcat-intlen = wa_details-length.
* wa_it_fldcat-decimals = wa_details-decimals.
* APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
* EXPORTING
* it_fieldcatalog = it_fldcat
* IMPORTING
* ep_table = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table). " New code by naren
Please Try this..
Thanks
Naren -
Regarding 2LIS_03_BF short dump
Hi Friends
Kindly help me in this regard, I got below short dump while executing "2LIS_03_BF" in RSA3 extract checker.
We wrote the customer exit for this data source, I put the debug point in my routine, but it not stopped. hope this error occuring before the routine. Please let me know the procedure what I should do here
Short dump:
Runtime Error IMPORT_ALIGNMENT_MISMATCH
Exception CX_SY_IMPORT_MISMATCH_ERROR
Occurred on 31.07.2007 at 09:06:01
Error when importing object "MC03BF0_TAB".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR
was neither
caught nor passed along using a RAISING clause, in the procedure
"MCEX_BW_LO_API" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When importing object "MC03BF0_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 174.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
The exception must either be prevented, caught within the procedure
"MCEX_BW_LO_API"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
There is a probably a new version of the program which does not
match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the ABAP/4 Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"IMPORT_ALIGNMENT_MISMATCH" CX_SY_IMPORT_MISMATCH_ERRORC
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
Information on where terminated
The termination occurred in the ABAP program "SAPLMCEX" in "MCEX_BW_LO_API".
The main program was "RSFHGEN2 ".
The termination occurred in line 226 of the source code of the (Include)
program "LMCEXU06"
of the source code of program "LMCEXU06" (when calling the editor 2260).
Processing was terminated because the exception "CX_SY_IMPORT_MISMATCH_ERROR"
occurred in the
procedure "MCEX_BW_LO_API" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLMCEX ". Its source code starts in line 5
of the (Include) program "LMCEX$06 ".
Thank & Regards
lasyaHi Fiends
One more question regarding above problem?
will it be problem in my code which I wrote in Routine, let me know?
CASE i_datasource.
WHEN '2LIS_03_BF'.
PERFORM 2lis_03_bf_exit
TABLES c_t_data.
endcase.
FORM 2lis_03_bf_exit TABLES p_c_t_data STRUCTURE mc03bf0.
Endform.
Thanks & Regards
lasya
Maybe you are looking for
-
Training and Event Management Business Events
Hi Experts, I would like to know if there is any BAPI/ FM available to create a Business Event Under particular Busness Group and Type. I have Some more things to have a clarification on 1. When we create Business Event in PV10, Where all the data is
-
How to change the text in Logon Page in NWDS7.3/EP7.3
Hello Experts, I am using NWDS7.3, & there is a requirement to change the text "User authentication failed " to some custom text. The message generally comes when you use wrong used id and password while logging portal url. I have downloaded the WAR
-
PO Approval Notification to Originator
Hello, When a PO is created and is forwarded on for approval, when it is finally approved does the originator or Buyer receive an email stating its approved ? Does this functionality exists in Oracle & if Yes, what setups are required to enable the s
-
How to uninstall applications from my nokia n97
i installed adictionary to my mobile and the mobile said that it not compatible with phone continue anyway and i said yes and the application has been istalled but it does not work and i want to unistall it when i goto application manager and select
-
TS2776 what does this mean it came up in itunes (-42404)
well i tried to download a game in the itunes store and then this came up a required itunes component is not installed (-42404) and i dont know what this means