Query regarding transport request

Hey guys,
I have a question regarding transport requests.
If only the report source code is included in the transport request, the text elements of the program will not be transported to the next box?
when you transprot the main program or the function pool, does it follow that all the changes in FM's under the function pool will be transported to the next box?
Thanks a lot!
Rgds,
Mark

Hello,
If you create transport request with just the report, text element will not be transported:
LIMU REPS <Program>
For text element, you need the following transport entry:
LIMU REPT <Program>
If you want to transport both, you can have the following entry:
R3TR PROG <Program>
If you have the following transport, all the components of function pool will be transported.
R3TR FUGR <Function Group>
Thanks,
Venu

Similar Messages

Assigning a SAP Query to Transport Request

Hi Friends
I have a SAP Query, now I want it to transport to the other system, while saving the query it is not prompting for transport request. Is there any possibility to assign that SAP Query to a transport request, if yes, please let me know the process.
Regards
Praveen

Dear All,
This regarding creation of SAP Query .
Situation:
Infosets and User Groups were created in a DEV SERVER CLIENT 200 and saved in a request ie.REQ01
Now i wanted to create a Query QU01 in the Same User Group in DEV SERVER CLIENT 210 so i tried creating a Infoset but i get this error message
Note: I am not able to create & save an Infoset.
Message no. TK414
Diagnosis
You cannot edit request D01K901880 of user X00012, since this request is reserved for changes in client 200. You are logged on to client 210.
Can anyone clear this error? what is the solution?
Thanking You
Andrew

Query Changes Transport Request

I created TP request for query keyfigure properties decimal poing change.I imported TP request to GRA. I have not seen changes in GRA.
Query in GRA is Display mode. when i try to open the query i am getting message authorisation check is required.
anybody idea how to reflect the changes in GRA query keyfigure decimal point changes.
please let me know.

Hi,
You have to make sure that all the elements of the queries are captured in the transport request. For that, in transport connection, while capturing the query, filter on "ELEM" and include them in transport connection.
As for authorization, you will not have it except in development. Thatu2019s the reason why you can not change the query in GRA directly. You always have to transport the changes.
Regards,
Yogesh

Error regarding Transport Request in Queries

Hi all,
We are facing this problem in Queries, we have a certain query, when I try to change it ,it is throwing an error saying that a particular Transport request is not available. I have checked in SE09 (Transport Organizer) and that perticular request as said does not exists. If I Try to generate a new Transport Request for the query,then again, I am not able to as an error occurs saying that the objects present are in different systems.
Has anyone faced a similar kind of situation before??
By the way we have upgraded to NW 2004s.
Regards,
Partha

Hi Partha,
go to - transport connection - click on Bex icon - Assign a request or create a new request and assign to Bex.
System would look for a transport request to save all the changes done to the queries, if one isnt assigned, the system wouldnt allow you to edit any of the queries.
Assign points if this helps.
Regards,
Anil

Regarding transport request for BEx.

Dear All,
Would you like kindly suggest regarding my case ..
Now in our transport system for BEx, we must create 1 transport request number (RSA1 - Transport Connection - BEx). Then this transport no is used by all modification in query designer / BEx.
But..
I've ever found in one system, that Each modification in every BEx/Query Designer has it own transport request number.
My Question is ..
Do you know to make BEx transport system like this ???
I mean, every modification in query designer/BEx has its own transport request no..
Is it because of updating some patch ??
Or is it because we must configure it in some t-code ? If yes, could you explain me how to do it ??
Really need your guidances.
Best regards,
Niel.

What I can suggest you for this. Do you have any request number in RSA1-> Transport Connect-> BEx.
Then every time you try to change a query(already transported )it says it is not assigned to transport request.
IN the transport connection assign to a request as we do for cubes etc then do the changes
For the new query it will be saved under $tmp. so what ever you want to transport assign it to request no as we do for cubes and then transport
Regards
PV

Query - Finding Transport Request

Hello Everyone,
I have queries in different transport requests. Given a query, how do i find out the corresponding transport request it is associated with.
Thanks

Hi
There are a few way's.
here is quick one:
go to RSA1,'Transport Connection',Query here look for the Query name and copy its technical name.
next, goto se01 and list allthe open transports.
then, stand on the upper node and expand all (via right click).
now search for the Query tech string.
look at this example:
BD3K901829   EHAYUT       Repair
5 Elements of the Query Builder
08PZF7C9RLQDY096E84FDEP5P                                0FKIJTURI31LH2H7YB9QIH8RF                                0NFU8RCIYLVISNUB70IQN6653
0OPF8SUCLC6JYHIUS40FDPRTW
2KUERICC8W93EDPYQHDI24AH
Reg's
Edan

Query Regarding Change Request management !!

Hey friends,
I want to know one thing about CHARM?
Lets assume that we implement CHARM in satellite system landscape.
After the implementing Charm Can we still create Transport request without using CHARM ??
I mean if a user logged into satellite system ( who does not have user id in solution manager ) creates transport request, will that transport request be created.??
Plz advise,
Will reward.
Regards,
Suzzane

Hai Suzzane,
Yes we can create transport request if proper authorization is maintained.
Under normal condition the developers will have the authorization to create transport request in satellite systems.
When we introduce charm,we must remove that authorization to have total control from charm.If the developer is still haveing the authorization to create he can create TP.
Hope this is helpful.
Thanks and regards,
Avinash.

Regarding transport request type

Hi
In t.cde SE-09 there 4 types of requet types explaine me about last two types .i.e
thansport of copies and relocation
Thanks &Regards
Ravi

Hi,
hi,
Change requests:- Changes to Repository and Customizing objects are recorded in change requests
Have a look at this
[http://help.sap.com/saphelp_erp2005/helpdata/en/4b/b155e40c3e11d3959a00a0c930dcc1/frameset.htm]
Transporting Customizing Settings
All system setting changes are put in project-specific change requests. You can transport the system settings into other SAP Systems with the change requests. The change requests are managed in the Transport Organizer.
There are two types of Customizing change requests:
Customizing request
Customizing requests contain changes to client-dependent tables.
Workbench request
Workbench requests contain changes to client-independent tables.
You can monitor the change requests by project in the project management. The Transport requests tab contains the following functions for the current client:
Activate CTS functionality
As prerequisite for creating change requests. When the CTS functionality is active, the pushbutton label changes to Display CTS project data. When the CTS project is finished, the pushbutton label changes to Reactivate CTS functionality.
Assigned CTS requests
Go to Transport Organizer request overview, where you can create requests for a project.
CTS project object list
The project object list is unchanged. When the customizing project is finished, the complete object list can be exported.
CTS project status switch
Sets the project status switch.
End CTS project
End your customizing project. You can reactivate it later.
See transport control by project for further information about the Change and Transport System (CTS) for customizing projects.
[http://help.sap.com/saphelp_erp2005/helpdata/en/09/88f330db9911d2b41a00609419f767/frameset.htm]
HTH,
Regards,
Dhruv Shah

Regarding Transport request from system to file or product CD

Hello Gurus,
Can anyone tell me how to transport transport request from system to file or product CD.
It is urgent.
Thanks in advance.
Best Regards,
zubera

Hi Albert,
Thanks for your reply.
I want to know the steps how to tranport TP ( tranport request ) from system to file.
Please can you detail procedure or any link to transport TP from SAP to file and file to SAP system.
Thanks in advance.
Best Regards,
zubera

Regarding transport request for updt rules.

Dear All,
Could you help me to find out the way regarding this .. ?
If we open transport request list (tcode se10), then we'll see the tree/part of update rules. We'll see in update rules part, is an number/code..
Could we know from that code what the name of update rules ?? Do you know the table that contain regarding the information ??
Many thanks.
Regards,
Niel.

Hi Pankaj,
Many thanks for the response you give to me. It solved my case.
Regards,
Niel.
Hi Maruti,
Many thanks for the response, but i don't know why when i was filling the updid into that table then execute it, i didn't get it ..
Regards,
Niel.

Regarding Transport Request

Dear ABAPers,
I have assigned one task by fi team...regarding to that they need to upload data into sap system through bdc...but they don't want to provide transport request num agn n agn...soo, in the initial step only they want to provide the transport request...after that n-number of records have to be uploaded but it should not ask for transport request after the 1st record...hope u all understand the issue and expecting suggestions from all abapers...pls suggest me....
Thanks & Regards,
xxxxxxxxxxxxxxx.

IN SE10, Click the icon for "Transport Organizer Tools".
Click Find Requests. Click Execute.
Enter transport number. clear out the Owner field, click the appropriate checkboxes below. Click Execute.
At the next screen, click Edit, Expand. Now you will see all of the objects.
Regards,
Rich Heilman

Hi gurus regarding transport request

hi gurus,
in configuration is there any things without creating transportation request?
regards,
srikanth..

It also depends on the client settings, which is done by the BASIS guys. If the client settings are done in such a way that system should not generate requests then it will not generate a request.
If the system is created as a Sandbox then also system will not ask for a request.
Regards,
GSL.

Opening Query: u0091BEx transport request '' is not available or not suitable"u0092

Hello,
I tried was able to run and modify a query last week. When I try to modify/run it now, it gives the message below and allows me to run it but not modify.
BEx transport request '' is not available or not suitable"
What are the possbile causes and remedies to this problem?
Thanks in advance.

dear Amanda,
here can imply 'copy' since as the result objects(query and elements) in production are exactly same with dev. but the terms 'copy' itself in query normally refer to copy query from one infoprovider to another infoprovider.
(transaction rszc).
i think she mean the query objects included in transport request and will be carried on to qa/production server.
once the new queries 'placed on transport'(in request), we must immediately create a bex request for the same package, otherwise nobody can save their queries (that included in the request).
transport bex
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
copy query
http://help.sap.com/saphelp_bw33/helpdata/en/9f/f57539d6d1c93be10000000a114084/frameset.htm
hope this helps.

Query regarding transporting deletion of roles

Hi,
When I delete a role in dev, in order to make the deletion effective across the landscape I need to put it in a transport request.
If I don't do that, and instead create a new role in dev by the same name as the one that was deleted, and then I transport this new role, will the new role overwrite the old one in the quality and production systems?
Or am I first required to transport the deletion, and then transport the newly created role ( by the same name)?
Thank you.

hii
This is little critical and tricky but you know whenever u do any modifcation with the role like deleting a role or creating a role the best pratice is to put in the transport request so that this request can be transported throughout the landscape .........
As per u r question dear u have created role in the development that role is already their in prd system with profile attached to it if u delete in dev and try to create the role with same name in dev again that role might not be deleted till u transport the new role frm dev to prd but their might be inconsisentcy with the new role which u have created as their might be cofusion with the two profiles the new profile and the old profile in prd server if u send the delete transport request frm dev to prd for the role which was their in the prd server the old role and profile will be lost so when u create a new role and transport it frm dev to prd their might be no inconsistency between the old profile and new profile,,,,,,,,,,,,,
takecare

Regarding transport request number

is it possible to assign an object to a released transport request number.
Just help me out .

Hi kasturi,
assigning an object to an already released transport request number is not possible, you need to generate a new one and assign the object to it.
<b>Saying thanks in SDN is by Rewarding points,</b>
Kiran

Query regarding transport request

Similar Messages

Maybe you are looking for