Query Changes Transport Request

I created TP request for query keyfigure properties decimal poing change.I imported TP request to GRA. I have not seen changes in GRA.
Query in GRA is Display mode. when i try to open the query i am getting message authorisation check is required.
anybody idea how to reflect the changes in GRA query keyfigure decimal point changes.
please let me know.

Hi,
You have to make sure that all the elements of the queries are captured in the transport request. For that, in transport connection, while capturing the query, filter on "ELEM" and include them in transport connection.
As for authorization, you will not have it except in development. Thatu2019s the reason why you can not change the query in GRA directly. You always have to transport the changes.
Regards,
Yogesh

Similar Messages

  • How can i change transport request description

    I need to  change transport request description for one table
    Note:
    Considering this post as Basic and Locking it for futher postings.
    Answer: Double click on the Request and using the change option, change it's Description
    Edited by: Vijay Babu Dudla on Jun 29, 2009 7:02 AM

    Hi,
       I know I am a little to late to the party! But for all those who are going to search for this in the future there is a very good blog...i am posting the link below...
    Basically run the program RDDIT076...
    http://scn.sap.com/community/abap/blog/2015/03/12/program-to-change-transport-request-description-after-release
    Regards,
    Divaker

  • How to change Transport Request Description in SAP

    Hi experts,
    I want to change Transport request description, please suggest me whether its is possible or not. else i have to delete the same request and re-create as per my requirement.
    Thank in advance..
    looking forward for expert comments...
    With Best Regards,
    Bharat B

    Hi Bharat ,
    You can chnage the description of the transport request if thesame is not moved from Development --> to Quality .
    Use T Code SE09/SE01 and select the required transport request no  and Double click on the same .
    Then click on Change  Icon and properties Tab . Here you can change the description of the Transport request.
    Thanks and regards
    Veera

  • Change Transport Request of a OSS Note

    Hi,
    We have implemented 10 OSS notes in one of our environements and saved all the notes in a single Transport Request. But we need to change Transport Request for 5 of these notes.
    Can anyone suggest the best way to change the transport request of a OSS Note, which should change the transport request of objects that are part of manual corrections as well?
    Thanks,
    Phani

    I understand the other 5 notes are required as well, just in a different transport request. Assuming that some are complex fixes touching many objects and might even be dependent on each other, maybe the safest way would be to reverse all 10 as described (in reverse order as they have been applied, last in first out), delete the transport request, then apply them again using the desired transport requests.
    Manual steps need special attention, as always.
    Thomas

  • Assigning a SAP Query to Transport Request

    Hi Friends
    I have a SAP Query, now I want it to transport to the other system, while saving the query it is not prompting for transport request. Is there any possibility to assign that SAP Query to a transport request, if yes, please let me know the process.
    Regards
    Praveen

    Dear All,
    This regarding creation of SAP Query .
    Situation:
    Infosets and User Groups were created in a DEV SERVER CLIENT 200 and saved in a request ie.REQ01
    Now i wanted to create a Query QU01 in the Same User Group  in DEV SERVER CLIENT 210  so i tried creating a Infoset but i get this error message
    Note: I am not able to create & save an Infoset.
    Message no. TK414
    Diagnosis
    You cannot edit request D01K901880 of user X00012, since this request is reserved for changes in client 200. You are logged on to client 210.
    Can anyone clear this error? what is the solution?
    Thanking You
    Andrew

  • Query - Finding Transport Request

    Hello Everyone,
    I have queries in different transport requests. Given a query, how do i find out the corresponding transport request it is associated with.
    Thanks

    Hi
    There are a few way's.
    here is quick one:
    go to RSA1,'Transport Connection',Query here look for the Query name and copy its technical name.
    next, goto se01 and list allthe open transports.
    then, stand on the upper node and expand all (via right click).
    now search for the Query tech string.
    look at this example:
    BD3K901829   EHAYUT       Repair                                                                               
    5  Elements of the Query Builder                                                                               
    08PZF7C9RLQDY096E84FDEP5P                                0FKIJTURI31LH2H7YB9QIH8RF                                0NFU8RCIYLVISNUB70IQN6653                               
    0OPF8SUCLC6JYHIUS40FDPRTW                               
    2KUERICC8W93EDPYQHDI24AH                                
    Reg's
    Edan

  • Query regarding transport request

    Hey guys,
    I have a question regarding transport requests.
    If only the report source code is included in the transport request, the text elements of the program will not be transported to the next box?
    when you transprot the main program or the function pool, does it follow that all the changes in FM's under the function pool will be transported to the next box?
    Thanks a lot!
    Rgds,
    Mark

    Hello,
    If you create transport request with just the report, text element will not be transported:
    LIMU REPS <Program>   
    For text element, you need the following transport entry:
    LIMU REPT <Program> 
    If you want to transport both, you can have the following entry:
    R3TR PROG <Program>         
    If you have the following transport, all the components of function pool will be transported.
    R3TR FUGR <Function Group>   
    Thanks,
    Venu

  • Planning book changes transport request failed in quality.

    Hi all,
    I have to make some changes in Macros for one of our planning book. As per practice I made these changes in Development and tested everything looks fine and created transport request to Quality. Request failed in quality with error code 8. which says individual objects could n to transport succesfully. I further tried to analyze the issue and looked at objects and they look like Slections ids were failed. Can anyone advie how do I locate and correct these - .
    I created transport request from function sapapo/tsobj and selected the planning book. I think this has selected all selctions ids also. Later I created another transport request from Planning book and this went through succesfully.
    But how I can corect the old transport request which is showing in red light as error.
    Thanks
    KV

    Hi KV,
    Regarding your wrong request, you can't dop much about it.
    Don't worry, I will be suprise if you were the first to have a wrong request in your system.
    I suggest you check your internal practice to know how to handle this kind of request.
    But basically the idea is: do not transport further. If possible "reject" it to ensure nobody will ever transport it.
    Another point: in your case it looks like you don;t really want to transport selection. It is however quite useful to do so, especially for the selection used in background job. I often suggest to:
    1. Have different naming convention for batch jobs selection and selection for interactive use (you can even control selection creation / usage with autorisation to avoid misuse)
    2. transport all selections related to batch job. If you decide to do so, you need to ensure all these selections are correctly defined in your development AND you need to delete this selection in all your target system (to avoid the locking issue you got)
    Sorry if all  this is a bit outside topic...
    I hope it helps
    Julien

  • How to change Transport request into local object $temp.?

    Hi experts,
    I would like to know to how to change a Transport request into and local object.
    I have already assigned Infopackage to TR, but its not required. We dont want this infopackage to be transported to prod. So how can i change that as a local object.
    Please put our valuable inputs.
    Thanks in advance.
    Regards,
    Dubbu

    Go To that Infopackage ,
    Extras Menu----Object catalog entry.  There you can change package name.
    or
    In SE09---Under the transport requests you can search for the infopackage name and delete from the TR.
    Regards,
    Srikanth
    Edited by: srikanth on Feb 19, 2009 2:26 PM
    Edited by: srikanth on Feb 19, 2009 2:27 PM

  • How to change transport request to local object again--plz help

    Hi all,
    By mistake I saved my FM in transport request.It is not released yet.I want it to be back in local object.Issue is that,when i deleted subrequest and that object from se09,package is not getting changed because the Function group is SAP standard,and not allowing changes.
    Plz help.....I am in real problem..
    Thanks in advance
    Meena

    Hi,
    Goto SE01,
    enter the TR number
    DISPLAY
    Expand the TR object list
    Place cursor on the object & right click & select DELETE object
    You will get a popup asking the object is locked..do u want to proceed.. say YES
    This will remove the object from the TR..
    Now you can delete the TR if it doesnt hv any other objects. If you delete the TR then object wud authomatically come under local objects.
    else...
    Open the object & goto attributes.. change the class & save.
    Best regards,
    Prashant

  • How to change transport Request of an Object

    Hi all,
    I had assigned a transport request for an object (DTP) in transport organizer. Now i need to put this object in a different transport Request number. Is this possible? If so can someone suggest me how to do this?
    Thanks
    Maddy

    Delete the DTP.
    Add the DTP to the new request - You can do this in SE03 or Transport Connection.
    Or
    Merge Requests using Context Menu on the Request.
    Or
    Open the DTP - Extras ( ? ) _ Object Direct Entry - Click on Change - Assign it to a new request. - You have to delete the DTP/Unlock it from the earlier request.

  • Opening Query: u0091BEx transport request '' is not available or not suitable"u0092

    Hello,
    I tried was able to run and modify a query last week. When I try to modify/run it now, it gives the message below and allows me to run it but not modify.
    ‘BEx transport request '' is not available or not suitable"’
    What are the possbile causes and remedies to this problem?
    Thanks in advance.

    dear Amanda,
    here can imply 'copy' since as the result objects(query and elements) in production are exactly same with dev. but the terms 'copy' itself in query normally refer to copy query from one infoprovider to another infoprovider.
    (transaction rszc).
    i think she mean the query objects included in transport request and will be carried on to qa/production server.
    once the new queries 'placed on transport'(in request), we must immediately create a bex request for the same package, otherwise nobody can save their queries (that included in the request).
    transport bex
    http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
    copy query
    http://help.sap.com/saphelp_bw33/helpdata/en/9f/f57539d6d1c93be10000000a114084/frameset.htm
    hope this helps.

  • How to change transport request

    hi,
    i have accidentally select the wrong transport request number when create a report at SE38, which i dont want and i would want to create a new request number .
    but i were unable to do so. can any one help me on this? thanks

    If you have assigned the report to a wrong request.
    Go to SE10, open the request, then the task, place the cursor on the report name (the report which you do not wnt in that request) and press the delete button on the task bar. This will delete only the entry of the report name from the request. the remaining objects in the request remain the same.
    Now open SE38, with the new report and press save, this will prompt for a transport request, create a new one and save it
    Please do not open multiple threads for teh same query.
    Regards
    Gopi

  • Assigning Query to Transport Request

    Hello ,
    I need to modify the Query
    0CSRV_C01_Q0102 Service Tickets Current Month Completion Rate by Emp Resp
    The Requirement is I need to change the
    Text view of Employee Responsible to Mediun Length text .
    When i changed the text and saved it is not asking for the Request .
    Then I go to RSA1 - Transport connection - Query - Collcted necessary objects .
    I can see the Application/Infoarea/Infocube/Query element/Infoobject/Routine
    My question is as I changed the Text view of Employee Responsible to Mediun Length text
    I need to select the employee Responsible in the Query Elements only or what I am supposed to do .
    Thanks ,
    Rahul

    Hello ,
    Kams thanks for the reply as I mentioned I just need to change the Text display ofone of the Infoobject .
    Soit seemd from your reply I just need to include the Infoobject in the Query Element and then transport that correct .
    Please correct me in case I missed some thing .
    Thanks ,
    Rahul

  • Changing transport Request

    Hi
    Accidentally i Put all my Bex object in diffrent tranport  day GBDK 92100. Now i would like to change it to GBDK92200. When i am trting to do that. It says objects are locked . Release all objects .
    Could  you tell the procedure to change the tranport request .
    Thanks in Advance

    If there are  elements in your transport that are loacked then release or delet the old transport in which you collecetd nby mistake or you can try unclocking the elements and delete the elements from wrong transport and recollect in new transport .
    To delete an element you ahve to go to tools in SE10 and then put in your old request and then unlock the request and then come back and double clik on your tarnsport and edit and select your elements that youw ant to delee and then delete them and then save your cahnges. Thus you unlock your elements and delet them from worng request now you can go back collect them againa nd transport them in the correct one.
    Make sure there is no open transport while collectinga nd transporting othet than the one you want as that would collect your changes in the open transport.

Maybe you are looking for

  • AWR Report - suggestions to improve performance.

    Hi Folks, Web application server version - 10.1.2.0.2 Database version - 10.1.0.4.0 OS version - AIX 5.3 WORKLOAD REPOSITORY report for DB Name         DB Id    Instance     Inst Num Release     Cluster Host xxxx      3419432639 xxxx            1 10.

  • [SOLVED]Kernel 3.0 boot problems.

    I recently built the 3.0 kernel (downloaded from kernel.org) and am trying to make it bootable. After creating an image and editing grub, I get an error talking about how modules.dep was not found, that /dev/sda7 does not exist and can't be mounted t

  • Cannot update or install latest version of iTunes 10.5.2

    I have iTunes running on Windows XP. I try to update to the latest version of iTunes 10.5.2, by using the menu Help / Check for update. It found the latest version 10.5.2 and download it. During the installation, it says it cannot remove the previous

  • Is there a way back?

    My PC decided to die today, so the only way of starting it up, was to restore it back to a previous date - a date where I have no music on my computer or iTunes library! I still have all music, apps etc on my iPhone, but obviously don't want to plug

  • Creating new Tablespace in 10g XE using Database Home Page

    How can I add a Tablespace using the "Database home Page" GUI? I've done this before, but now do not see a link for "Create Tablespace" under the Administration -> Storage icon. I'm logged in as sys.