Query related to PLZU table

Hello ,
After upgrade , we have observed that there are junk characteristics in field PLZU-PLNNR ( Key for Task List Group)
Could someone explain the contents of table PLZU & what are the dependencies of PLZU with other PL* tables

Hello,
I'm not sure I got your exact request.
Below you can find the routing tables and you can chech the contect of each in the TA SE11
(the key fields are always flagged in the tables).
Routing
PLPO          Routing Operation Details
PLKO         Routing Header Details
MAPL         Routing Link to Material
PLAB          Relationships - Standard Network
PLAS          Task List - Selection of Operations
PLMZ         Component Allocation
PLPH          CAPP Sub-operations
PLFH          PRT Allocation
PLWP         Maintenance Package Allocation
PLMK         Inspection Characteristics
Best Regards,
Dora

Similar Messages

Query related to Internal Table

Hi ,
I have a small query related to internal table , can we dump millions of records to an internal .
The actual requirment is like i need to develop a report in BI side where i have to dump records into an internal table from PSA tables without filtering .
Can we do so ....
or do we have any other option to dump the data to an internal tables .
need some tips on the same .
Thanks ,
VInay.

Hello Vinay,
I believe the following extract will give you a brief idea on the size limitations for an internal table.......
Internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. <u><i>The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries.</i></u>
Hope it proved useful
Reward if helpful
Regards
Byju

Query related to database tables

Hi,
Im having a requirement wherein i would like to create one ztable and the purpose is only to get the fields but not the values for the same. Bez, with the help of these fields in ztable and developing some logic and it shld be dynamic based on the no of fields appended into ztable.
To be clear, can i write a select query only to get the fields from the table but not the values ( in this no way i will get the values bez i won't insert any records for the same).
I thnk im clear from my end.
Thanks
rohith

To get the fields, you can write the query like this too :
tables: dd03l.
data: begin of itab occurs 0,
fieldname like dd03l-fieldname,
end of itab.
*parameters: p_tab like dd03l-tabname.
select fieldname from dd03l into table itab where tabname = 'VBAK'.
LOOP AT ITAB.
WRITE:/ itab-fieldname.
ENDLOOP.

Query related to external table authentication

Hi Gurus,
I am new to OBIEE. When we login to the Oracle Business intelligence, we used to give user as Administrator and password as Administrator.
At this point, can we authentication the userid and password which is stored in external table in a users schema?
~ John

"Administrator" will always be a user which is registered in the repository. All other users can be authenticated by external table authentication.
You can create an init block which sets the USER system variable by
SELECT user FROM users WHERE user = ':USER' and password = ':PASSWORD'

Give me the sql query which calculte the table size in oracle 10g ecc 6.0

Hi expert,
Please give me the sql query which calculte the table size in oracle 10g ecc 6.0.
Regards

Orkun Gedik wrote:
select segment_name, sum(bytes)/(1024*1024) from dba_segments where segment_name = '<TABLE_NAME>' group by segment_name;
Hi,
This delivers possibly wrong data in MCOD installations.
Depending on Oracle Version and Patchlevel dba_segments does not always have the correct data,
at any time esp. for indexes right after being rebuild parallel (Even in DB02 because it is using USER_SEGMENTS).
Takes a day to get the data back in line (never found out, who did the correction at night, could be RSCOLL00 ?).
Use above statement with "OWNER = " in WHERE for MCOD or connect as schema owner and use USER_SEGMENTS.
Use with
segment_name LIKE '<TABLE_NAME>%'
if you like to see the related indexes as well.
For partitioned objects, a join from dba_tables / dba_indexes to dba_tab_partitions/dba_ind_partitions to dba_segments
might be needed, esp. for hash partitioned tables, depending on how they have been created ( partition names SYS_xxxx).
Volker

How to query from the xml table a single, specified element.

I'm quite new in Xml Db. Pleas, can anybody tell me how to query from the xml table below a single element (i.e. the element 'rapportoparentela = NIPOTE' related to the element 'codicefiscale = CRRVNC76R52G337R', or the element 'rapportoparentela = FIGLIO' related to the element 'codicefiscale = CRRRNT51L23G337Q')?
- <dati xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<codiceinterno />
<codicefiscaleassistito>CRRMNL81R31G337H</codicefiscaleassistito>
- <famigliare>
<codicefiscale>CRRVNC76R52G337R</codicefiscale>
<rapportoparentela>NIPOTE</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>CRRRNT51L23G337Q</codicefiscale>
<rapportoparentela>FIGLIO</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>CBRPRN15S65E080W</codicefiscale>
<rapportoparentela>I.S.</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>CRRMNL81R31G337H</codicefiscale>
<rapportoparentela>NIPOTE</rapportoparentela>
</famigliare>
- <famigliare>
<codicefiscale>BCCCML54C50I845G</codicefiscale>
<rapportoparentela>NUORA</rapportoparentela>
</famigliare>
</dati>
Using SELECT extractValue(value(t),'/rapportoparentela') into result FROM NF_XMLT X,
TABLE ( xmlsequence (extract(value(X),'/dati/famigliare/rapportoparentela'))) t
I get all the elements 'rapportoparentela' and I want to get only one specified.
Regards.
Piero

Piero,
you can add the condition "CRRVNC76R52G337R" to your xpath-expression like:
SELECT extractValue(value(t),'/rapportoparentela')
FROM NF_XMLT x
,TABLE ( xmlsequence (extract(value(X),'/dati/famigliare[rapportoparentela="CRRVNC76R52G337R"]'))) tto select only those famigliare-elements that have a child-element rapportoparentela with value "CRRVNC76R52G337R".
When you stored your XML in an XMLType column in the table, i think the following queries are better:
SELECT extractValue(x.your_XMLType_column,'/dati/famigliare/rapportoparentela')
FROM NF_XMLT x
WHERE extractValue(x.your_XMLType_column,'/dati/famigliare/codicefiscale')
= 'CRRVNC76R52G337R'or
SELECT extractValue(x.your_XMLType_column,'/dati/famigliare/rapportoparentela')
FROM NF_XMLT x
WHERE existsNode(x.your_XMLType_column,'/dati/famigliare[codicefiscale="CRRVNC76R52G337R"]')
!= 0

How to improve Query performance on large table in MS SQL Server 2008 R2

I have a table with 20 million records. What is the best option to improve query performance on this table. Is partitioning the table into filegroups is a best option or splitting the table into multiple smaller tables?

Hi bala197164,
First, I want to inform that both to partition the table into filegroups and split the table into multiple smaller tables can improve the table query performance, and they are fit for different situation. For example, our table have one hundred columns and
some columns are not related to this table object directly (for example, there is a table named userinfo to store user information, it has columns address_street, address_zip,address_ province columns, at this time, we can create a new table named as Address,
and add a foreign key in userinfo table references Address table), under this situation, by splitting a large table into smaller, individual tables, queries that access only a fraction of the data can run faster because there is less data to scan. Another
situation is our table records can be grouped easily, for example, there is a column named year to store information about product release date, at this time, we can partition the table into filegroups to improve the query performance. Usually, we perform
both of methods together. Additionally, we can add index to table to improve the query performance. For more detail information, please refer to the following document:
Partitioning:
http://msdn.microsoft.com/en-us/library/ms178148.aspx
CREATE INDEX (Transact-SQL):
http://msdn.microsoft.com/en-us/library/ms188783.aspx
TechNet
Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Allen Li
TechNet Community Support

Regarding ABAP Query related

Hi,
Can any body tell me how to keep query related data in
internal table?
Regards,
Suresh Kumar.

Do you mean that you are running a SQ01 query and you want to get the data from it into your report program?
If this is the case, the normal way that we pass internal tables and stuff from program to program, is thru IMPORT/EXPORT statements. But since you are talking about a query this may be a problem in adding the EXPORT statement to it.
Regards,
RIch Heilman

Query on Custom schema table getting 'Do You want to save changes' message

Hi all,
I am getting the error message whenever I query from the custom table. Here is the description of the issue.
1. I have a button on the first block. When the user clicks on this button , execute_query is called on another block. Then the user getting the message "do you want to save the changes" . Although there are no changes made on the form.
2. The second block is based on a custom table defined on the custom schema.
3. Created public synonym for this table and also gave the all the grants to apps schema on this table.
4. This error was not coming before when the second block is based on Apps schema table.
Any idea on how to fix this.
Thanks

I doubt the problem is related to a schema or public synonym. The message is appearing because the value for an item is being changed after your query executes.
First check to make sure that the blocks that are not based on a table are set to No. See the Database Data Block Property.
If that doesn't solve the problem, then run the debugger and watch to see what item is changing. You may be doing something in a trigger.

Using case when statement in the select query to create physical table

Hello,
I have a requirement where in I have to execute a case when statement with a session variable while creating a physical table using a select query. let me explain with an example.
I have a physical table based on a select table with one column.
SELECT 'VALUEOF(NQ_SESSION.NAME_PARAMETER)' AS NAME_PARAMETER FROM DUAL. Let me call this table as the NAME_PARAMETER table.
I also have a customer table.
In my dashboard that has two pages, Page 1 contains a table with the customer table with column navigation to my second dashboard page.
In my second dashboard page I created a dashboard report based on NAME_PARAMETER table and a prompt based on customer table that sets the NAME_ PARAMETER request variable.
EXECUTION
When i click on a particular customer, the prompt sets the variable NAME_PARAMETER and the NAME_PARAMETER table shows the appropriate customer.
everything works as expected. YE!!
Now i created another table called NAME_PARAMETER1 with a little modification to the earlier table. the query is as follows.
SELECT CASE WHEN 'VALUEOF(NQ_SESSION.NAME_PARAMETER)'='Customer 1' THEN 'TEST_MART1' ELSE TEST_MART2' END AS NAME_PARAMETER
FROM DUAL
Now I pull in this table into the second dashboard page along with the NAME_PARAMETER table report.
surprisingly, NAME_PARAMETER table report executes as is, but the other report based on the NAME_PARAMETER1 table fails with the following error.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1756 message: [Oracle][ODBC][Ora]ORA-01756: quoted string not properly terminated. [nQSError: 16014] SQL statement preparation failed. (HY000)
SQL Issued: SET VARIABLE NAME_PARAMETER='Novartis';SELECT NAME_PARAMETER.NAME_PARAMETER saw_0 FROM POC_ONE_DOT_TWO ORDER BY saw_0
If anyone has any explanation to this error and how we can achieve the same, please help.
Thanks.

Hello,
Updates :) sorry.. the error was a stupid one.. I resolved and I got stuck at my next step.
I am creating a physical table using a select query. But I am trying to obtain the name of the table dynamically.
Here is what I am trying to do. the select query of the physical table is as follows.
SELECT CUSTOMER_ID AS CUSTOMER_ID, CUSTOMER_NAME AS CUSTOMER_NAME FROM 'VALUEOF(NQ_SESSION.SCHEMA_NAME)'.CUSTOMER.
The idea behind this is to obtain the data from the same table from different schemas dynamically based on what a session variable. Please let me know if there is a way to achieve this, if not please let me know if this can be achieved in any other method in OBIEE.
Thanks.

Best practice for a same query against 2 different tables

Hello all,
I want to extract info about tablespaces storage, both permanent and temporary. For that I use 2 different cursors that do exactly the same query but against a different table (dba_data_files and dba_temp_files).
CURSOR permanentTBSStorageInfo (tablespaceName VARCHAR2) IS
SELECT file_name, bytes, autoextensible, maxbytes, increment_by
FROM dba_data_files
WHERE tablespace_name = tablespaceName;
CURSOR temporaryTBSStorageInfo (tablespaceName VARCHAR2) IS
SELECT file_name, bytes, autoextensible, maxbytes, increment_by
FROM dba_temp_files
WHERE tablespace_name = tablespaceName;
First I'm bothered that I have to use 2 cursors to execute the same query against 2 different tables. Is there no another way around?
Then I fetch the results of this cursors in 2 different loops because I didn't find a way to dynamically call the cursors. I am looking for best practice here, knowing that I will do the same parsing against the results of the 2 cursors.
Thank you,

Hi
Check whether the below query is helpful or not
select      fs.tablespace_name "Tablespace",
     fs.tempspace "Temp MB",
     df.totalspace "Total MB"
     from
     (select
     tablespace_name,
     round(sum(bytes) / 1048576) TotalSpace
     from
     dba_data_files
     group by
     tablespace_name
     ) df,
     (select
     tablespace_name,
     round(sum(bytes) / 1048576) tempSpace
     from
     dba_temp_files
     group by
     tablespace_name
     ) fs
     where
     df.tablespace_name = fs.tablespace_name;
Thanks

How can i display all the query items to a table?

how can i display all the query items to a table in a jsp file?
i always have an out of memory error..

any body??any idea?
is it possible thru configuration or i have to write a program by the abaper??
Biswa

Query relating to the creation of Managed Service Accounts

Hi Folks
I am studying for my 70-411 exam and have a query relating to the creation of Managed Service Accounts.
I have successfully created an MSA account named 'MSATest' on a DC using:
new-adserviceaccount -name msatest –dnshostname home-dc-01 -passthru
and
add-AdcomputerServiceAccount -identity home-ap-01 -serviceaccount msatest -passthru
However the guide that I am using now says that I now need to run: Install-ADServiceAccount on the host computer in the domain to install the MSA in order to make available it available for use by services.
So on my member server (home-ap-01) I have installed the Active Directory Module for powershell and ran:
PS C:\Users\administrator.PCECORP> Install-ADServiceAccount -Identity msatest
Install-ADServiceAccount : Cannot install service account. Error Message: 'An
unspecified error has occurred'.
At line:1 char:1
+ Install-ADServiceAccount -Identity msatest
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : WriteError: (msatest:String) [Install-ADServiceA
   ccount], ADException
    + FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:Install
   ServiceAcccountFailure,Microsoft.ActiveDirectory.Management.Commands.Insta
llADServiceAccount
PS C:\Users\administrator.PCECORP>
However this errors, Have I misunderstood the purpose of the Install-ADServiceAccount ? or am I doing something wrong?
Thanks in advance for you help.

Try using -RestrictToSingleComputer parameter when creating service account with New-ADServiceAccount.
Gleb.
Hi Gleb
Thank you for your help, it is appreciated. That did the trick.
All the best.

Query related to multiple attachments in mail adapter

Hi,
I have a query related to multiple attachments in receiver mail adapter.
I have successfully configured mail related scenarios but now I have another requirement in which I have multiple source files in one directory and I want to send one mail for multiple files as mail attachment using receiver mail adapter. Can anybody help me how to achieve multiple attachments in reciever mail adapter.
To clarify the requirement more let us take an example
Ex: I have 5 input files in the source which I pick up using additional files option in the sender file adapter, now I want to send those 5 files into one mail with 5 attachments. Can anybody explain how 5 different payload will be sent as multiple attachments in one mail.
For your information I used, options like "keep attachments" , some parameters in module processesors etcs...but not able to find out as how exactly it will be achieved.......I dont want to use BPM collect pattern for this.....
Need your help on this issue. Please suggest the solution as how it can be achieved using receiver mail adapter.
Thanks & Regards
Prabhat

Hi,
I resolved the issue on my own. Thanks for your help and support.
Thanks & Regards
Prabhat

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

Query related to PLZU table

Similar Messages

Maybe you are looking for