Query Servers for a specific certificate

Hello,
We have a wildcard certificate on our domain. Our CA is not longer supporting the SHA-1 algorithim and I need to re-key my certs to SHA2. The problem I have is my previous network admin did not document the servers the wildcard cert was installed
on. I was wondering if there was a powershell script that would check the Personal Store and tell me if
*.domain.com is installed. Otherwise I have about a week to check around 100 servers manually.
Please help,
Cheston

Hey Cheston - alright I threw something together this morning right quick... You have to be able to open a PSSession to each of the computers, but the code looks like this:
$local = @() # blank array to store data
$adm = Get-Credential # for admin creds
Get-ADComputer -ldapFilter "(&(operatingsystem=*server*))" | % {
$s = New-PSSession -ComputerName $_.name -Credential $adm
$local += Invoke-Command -Session $s -ScriptBlock { (gci Cert:\LocalMachine\My) }
$local # print all the certs.
G. Samuel Hays, MCT, MCSE 2012, MCITP: Enterprise Admin
Blog:gsamuelhays.blogspot.com
twitter:twitter.com/gsamuelhays

Similar Messages

Filtering a Query result for a specific value of a key figure

Hi folks,
I want to filter a query for a specific value of a key figure. The report should display all customer who has an account balance greater than EUR 500'000.
Can I only implement this kind of filter via a condition in Query-Designer? If I run that query on an InfoCube with non-cumulative key figures over all our customers (> 400'000) I have problems with the consumption of the memory. If I restrict the amount of the customers to 50'000 - 60'000 then it works. It seems that the query reads all customer records in an internal table before applying the condition.
Is there another way to deal with? Any help appreciated.
Kind regards
Hansjörg Luzi
Graubündner Kantonalbank
CH-7002 Chur

You could try to implement an alternative solution: define a new Characteristc with discrete values (in the following example I suppose to have intervals of 10)
KF -> CHAR
115 -> 110 (110 <= KF < 120)
5 -> 0 ( 0 <= KF < 10)
83 -> 80 ( 80 <= KF < 90)
Then you can use these dicrete values to filter ...
I know that it's not so "flexible" (discetization must be predefined), but query response time is quicker and you can use Aggregates ...
Hope it helps
GFV

Can you authenticate users from 2 different AAA-servers for one specific tunnel-group?

I need to authenticate users from two separate AD LDAP databases on the same tunnel-group. I would like them to use the same tunnel-group and thereby using the same group-alias. I tried creating a new aaa-server group and putting both LDAP servers into group but apparently the ASA does not roll through the separate servers in the aaa-server group and will stop if the first server states that the authentication failed.
I also tried assigning multiple aaa-server groups into the tunnel-group authentication-server-group but that also did not work. I finally tried to create a separate tunnel-group and assigning it the same group-alias but the ASA will not allow me to assign the same group-alias to different tunnel-group. What is the best way to accomplish this without having to create a new group-alias that will show up and possible confuse the dumb users requiring this access? Please help.

If you don't want ANY drop down I believe you can do it in a kludgy sort of way.
Eliminate all the group aliases (which are used to populate the dropdown) and make a local database of the users for the sole purpose of assigning / restricting them to a non-default tunnel-group which authenticates to the secondary LDAP server.
You can also send out a non-published URL that points to a second tunnel-group not in the dropdown.
Of course, we can accomplish this if the AAA server is ISE. ISE 1.3 can authenticate users to multiple AD domains (with or without trust relationships) or a single domain with multiple join points in the Forest.
The ISE answer makes me wonder - could you establish trust between the domains and authenticate users that way?

Microsoft Exchange 2013 eDiscovery - specific search query: looking for specific hyperlinks within e-mails content/body

Dear all:
I am currently using the MS Exchange 2013 eDiscovery feature with the objective to identify which of my users have received emails containing specific hyperlinks (e.g. http://website1/webroot/file.zip, http://website2/webroot/file.zip, etc.) from an unknown
sender.
To this end, I have been creating an eDiscovery on-hold case looking for a specific search criteria in all mailboxes.
As the search criteria, I have tried many options but was unable to obtain satisfying results: I know I am missing some e-mails from this specific search (I checked manually). I have notably tried the following search queries (with and without the body:
search operator, with and without double quotes, etc.)
body:http://website1/* OR body:http://website2/*
body:"http://website1/*" OR body:"http://website2/*"
body:"website1*" OR body:"website2*"
body:"*website1*" OR body:"*website2*"
When replaying these queries on my local Outlook client, everything works fine and I get results as expected.
However, when going through the ECP eDiscovery feature, I am missing some results.
Therefore, I am looking for any advice on what Exchange eDiscovery KQL query I should use to identify all emails containing, in their message body, a list of specific hyperlinks/URLs.
Many thanks in advance for your help.
S.

Alas I do not know the answer to resolution via ECP and like you I have found it to be a bit maddening to use ECP for discovery tests Ive done when comparing results with our DigiScope product. I know we can accomplish what your looking to do via Regular
Expression but again that's with a 3rd party tool.
One thought is I suppose it could be an indexing issue with the DB, so perhaps rebuilding the index would help?
If you do get it working I would love to know the resolution since many of my tests with ECP have left me yelling at the screen. When its works its cool when not well...
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
--> 2007 --> 2010 --> 2013 with Lucid8's
DigiScope

App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results

Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspx

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

Query Builder - Getting Universelist for one specific Group

Hi All,
I am in need of a query string (in query builder) that will return me All the universes for a specific group.Is it possible to do and if possible what will be the way to do this?
Thanks in advance for your help,
Anirban

Hi Anirban,
What is the BusinessObjects version you are using ( i.e. BO XIR2 or BOXI 3.0)?
Regards,
Deepti Bajpai

CQWP does not return result for a specific query when filtering on a managed metadata field.

Hi,
We are facing a serious production issue. We've search the web extensively but to no avail.
Problem:
CQWP does not return result for a specific query when filtering on a managed metadata field.
ULS log:
The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
Query:
The query is as follows:
(I've translated this from dutch so pardon any typo's)
Query: (top selection) Display items from all sites in the site collection
ListType: Documentlibrary
Contenttype:
Items from this group:Custom Document Contenttypes
Items from this content type: Verklaring
Filter: Soort is equal to X
extra info: the field soort (Type) is a managed metadata field that was assigned the value X
Managed Metadata Structure:
-managed metadata service
-Contoso
    -Enterprise Taxonomy (term set)
      -Document (term)
        -Verklaring (term)
          -Soort (term)
            -x (term)
EXTRA INFO:
When I modify the filter to filter on Title the CQWP DOES return the correct document!
When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
QUESTION:
Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
Why does the CQWP return the document when filtering on a managed metadata field over a single library.
(The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
Here are the ULS logs.
Product: Web Content Management
Category Publishing
Level: Monitorable:
CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien. Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien. Probeer
het opnieuw.     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)
bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     --- Einde van intern uitzonderingsstackpad
---     bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
siteDataQuery, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)
bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query: '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
Product: Web Content Management
Category Publishing
Level: Warning
Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien. Probeer het opnieuw.
at the following url: /. Titel webonderdeel: Inhoudsquery
Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
Product: Web Content Management
Category Publishing
Level: Medium (this message is displayed 14 times)
ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.

Hi,
while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
We have a fairly large term store (4000+ lines).
If somebody has a clue or tip that would greatly appreciated!
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql. This can result in blocking in sql and excessive memory use on the front
end. Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components. If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed:    bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
SqlQueryData monitoringData)     bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
retryfordeadlock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock)     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
site, String webUrl, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery()     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
viewPath)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()
bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()
bij System.Web.UI.Control.EnsureChildControls()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()
bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest()
bij System.Web.UI.Page.ProcessRequest(HttpContext context)     bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context)     bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
context)     bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c

How to query the opening balance for an specific account for an spec. date

Hi all,
for my user query I need to calculate the opening balance for an cash account for an specific date.
Any ideas, how can I do this?
Or may be you know a field in an SBO table that already contains information I need...
Best Regards,
Inna

Hi Inna,
to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
Symptom
How to find the opening balance of a business partner or G/L account.
Other terms
Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
Reason and Prerequisites
Consulting
Solution
There are several possible approaches:
Approach 1 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 2 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data.
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
Approach 3 - G/L Account Opening Balance:
1. Go to Financials -> Chart of Accounts -> click on the account name once.
2. Click on the orange link arrow next to the field 'Balance'.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 4 - Business Partner and/or G/L Account Opening Balance:
1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
3. Ignore the red system message in the bottom of the screen.
4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
5. Copy the query below:
SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1] T0 WHERE T0.[TransType] = '-2' and T0.[ShortName] = '[%1]'
6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
7. Click on 'Execute'.
8. Click on 'Existing Values'.
9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
All the best,
Kerstin

Query on IDOC Ack (STATUS) config in XI for a specific partner comm.

Hi Experts,
Is it possible to configure the IDOC Ack (STATUS.SYSTAT01 message) in XI for a specific partner communication? We want to configure our system like ALEAUD but the message type should be STATUS.SYSTAT01 and the acknowledgment should be send to sender system for a specific partner only if XI receives any IDOC like (Orders) from that specific partner. For other partners (same sender system) we donu2019t want this acknowledgment settings and configuration. If possible please provide the configuration filters steps etc. Thanks for your valuable inputs in advance.
Thanks,
Satish
Edited by: Satish Jaiswal on Jan 8, 2009 2:55 AM

Hi Husain,
I have the document you have mentioned. Please note my requirement is to filter the Ack while creating and sending to R/3 based on Partner and Message type. The document provides info only on Message type filter but not parner specific for same sender system!!! Any help appreciated. Also note: BPM and Alert is out of scope.
Looking for some ALE configuration tricks to achieve this.
Thanks
satish
Edited by: Satish Jaiswal on Jan 9, 2009 2:40 AM

Verify Specific Certificate is Installed

I have hundreds of servers I need to verify that specific certificates are installed from time to time. Rather than logging in and spot checking them, I'd like to run a script that can verify. I've looked through numerous postings using CERTUTIL which seems
to be the correct tool but I'm just not finding the write verbose. I can use the -store command and see there are some 50 certs installed, I can even see my cert I'm trying to verify. Rather than having to look through the entire list I was trying to find
just that one cert. When I use the -isvalid tag and specify the serial number or hash tag I get:
CertUtil: No local Certification Authority; use -config option
CertUtil: No more data is available.
I know I'm missing something here but just can't find it. Can anyone point me in the right direction?

If you have PowerShell Remoting enabled on these computers, you can use PowerShell's Cert: drive to check it, rather than trying to parse the output of CertUtil. For example:
Invoke-Command -ComputerName SomeRemoteComputer -ScriptBlock {
Get-ChildItem -Path Cert:\LocalMachine -Include SomeCertificateThumbprint -Recurse |
Select-Object -First 1
If you know which certificate store you need to query, you can also just look for the certificate right in the remote computer's registry. For example, you could look for the registry key "HKEY_LOCAL_MACHINE\Software\Microsoft\SystemCertificates\MY\Certificates\SomeCertificateThumbprint"

Is it too much to ask MS for a simple ad-hoc query tool for end users?

Hello
This is a general MS BI topic and not specific to Power Query, but I couldn't find a more suitable general forum for it.
This posting is the result of the frustration I have with MS BI stack, whereby a simple ad-hoc drag and drop query tool to get the data in a table format (preferably from a relational
data source) is missing, something that other big vendors have, such as SAP Business Objects Universe and the associated tools. The deprecated SSRS Report model and SMDL was the closest MS ever got to this functionality (although that had some limitations
too), which unfortunately is dead now in favour of all sort of "Power" tools that basically can’t deliver the same functionality.
The requirement is pretty simple: provide users with a tool that they can drag and drop fields from different entities in a data model without having to worry about entity relationships and
apply necessary filters and get the data out in Excel or CSV, no fancy (or even simple) aggregation or formatting is required, and users should only see the rows they are authorized to see, i.e. row level security (RLS) of data.
Let’s see what we have at our disposal from MS BI:
From the modeling perspective, we have relational models in the database that support RLS with views, but obviously cannot maintain PK-FK relationships in the database model between views. Other
models are .Net Entity Data model Framework model exposed as OData, and SSAS tabular, SSAS PowerPivot, SSAS multidimensional, which you can find a good comparison of their features here:
http://www.sqlchick.com/entries/2012/3/4/decisions-powerpivot-ssas-tabular -or-ssas-multidimensional-m.html
From the tools perspective we have:
Power Query on top of a relational database (SQL Server): Can connect to relational databases easily, generated queries are optimal, detects relationships with entities, but only when entities
are tables and have PK-FK relationships enforced in the database. So can’t detect relationships with views and hence can’t enforce RLS, so this is not an option unless users keep joining entities, which is not a desirable option either.
Power Query on top of an OData: Works well except that queries generated for multiple entity expansion are terrible (look here for more details:
http://social.technet.microsoft.com/Forums/en-US/7a8b8e52-d3a9-42af-bc52-9d5459c00529/odata-multilevel-expand-query-issue?forum=powerquery). In addition all filtering and projections are done at client side, so even if you want 1 row out of 1 million, all
rows are brought over to Excel before filtered. Overall this results in unacceptable performance even for small sized data.
Power Query on top of a tabular model: Doesn’t support that type of data source yet (http://social.technet.microsoft.com/Forums/en-US/ebcccb5e-7058-4046-917d-3d7fcf60cbdc/tabular-model-as-data-source-for-power-query?forum=powerquery).
Even if it did, tabular models don’t support Many-to-Many relationships out of the box and not sure if there are plans to support tabular models in Direct Query mode in Power Query to take care of RLS.
Excel on top of tabular models or multidimensional models: The tabular model should not be in Direct Query mode and you only get to use PivotTable to query the model. PivotTables are not famous
for generating optimal MDX queries, so performance is not going to be acceptable if you are dealing with large dimensions, especially large junk and degenerate dimensions. You can use drilltrough to get details of a measure, but you have to specify the columns
for a drilltrough action upfront, no flexibility for users to select what they want to see.
PowerPivot on top of relational databases: The query designer cannot detect relationships between views, so users have to perform manual joins, not an option.
PowerPivot on top of a multidimensional or tabular model: The query designer doesn’t generate optimal MDX queries by drag and drop. Especially there doesn’t seem to be a way to add related
attributes of a dimension attribute to the query without cross joins which results in poor performance on large dimensions. Other issues found here
http://sqlblog.com/blogs/marco_russo/archive/2010/08/24/using-ssas-2005-2008-as-powerpivot-data-source-query-designer.aspx. In addition the result set has ugly column names and issues with data types, such as interpreting numeric data types as Text, and
there’s no straight forward way of getting the data from PowerPivot directly to Excel. The user either has to do a copy/paste (which doesn’t work on large datasets) or create a pivot table, bring the measure, and drillthrough the measure to get the details
in table format.
PowerPivot with OData: Treats every entity as a separate table to import, not suitable for our use case.
Report Builder and SSRS on top of relational, multidimensional or tabular model: Given the query designer is the same as PowerPivot, it has similar issues. In addition, there are 4 more steps
from designing a query to generating an Excel or CSV output, not an option.
PowerView: Works against tabular and multidimensional models, but there’s no way of exporting data to Excel sheet. Besides the add-in is not available for Excel 2010.
Good old MS-Access: Link to tables and views through ODBC, create relationships between entities and give each user a copy of that Access database to create their queries, and deal with the
nightmares of updates to the model and distribution of new models to the users! Did I mention Access as an option?
So there you go, 10 options, none of which can deal with a seemingly simple use case sufficiently. At the moment, the best among them appears to be option 6 against a heavily optimized OLAP
cube, and perhaps #3 when/if Power Query support for tabular models in direct query mode arrives. Perhaps I am missing something very obvious, and would like someone to enlighten me here.
Thanks
MR

Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789

How to Search for a specific element in a MultiGraph?

Hi there
Im trying to implement a Multigraph ADT in Java. Multigraph is a graph that has multible edges connecting a node. I assume you all know what a Graph ADT looks like.
So i think ive got all the basic methods functions of a normal graph/mulitgraph and now i want to search for a element in it
The question is how will i so that?
Do i use a breadth first search?
But i thought a BFS traverses all the elements in a graph? And how can i use a BFS to search for a specific element in a graph?
Thanks

Hey there
thanks for your reply but i still some query.
I thought of doing that but i want to remember the nodes i revisted to get to the target (not all - but the quickest route to that node)
My design so far is:
have 3 Interface namely Graph, Node & Edge.
Classes will inherit those interface to provide the actual implementation as i want the details/coding to be abstract meaning i can give many different way of implementations.
The graph class will add nodes & edges where when adding edges, edge will store 2 nodes in it respectively source & destination nodes.
Both Node & Edges will be stored in graph using some data structures atm (arrayList i presume)
My Design is that i want to (my aim of the task of searching) search for a node in the multigraph by inputting (maybe 2 nodes) into method - start node target node! The method should return a list of nodes to get to the target node.+
So so far i have this wee algorithm in mind:
+1. Input start + target node as parameters+
+2. Use BFS to search the graph+
+3. When reached target node - halt+
+4. return the list of nodes that visited to get there (but not all - only the precise & fastest)+
So will that work?
If so how do i go about doing implementation?
Thanks

Search for records in the event viewer after the last run (not the entire event log), remove duplicate - Output Logon type for a specific OU users

Hi,
The following code works perfectly for me and give me a list of users for a specific OU and their respective logon types :-
$logFile = 'c:\test\test.txt'
$_myOU = "OU=ABC,dc=contosso,DC=com"
# LogonType as per technet
$_logontype = @{
2 = "Interactive"
3 = "Network"
4 = "Batch"
5 = "Service"
7 = "Unlock"
8 = "NetworkCleartext"
9 = "NewCredentials"
10 = "RemoteInteractive"
11 = "CachedInteractive"
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0""
or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>" -ComputerName
"XYZ" | ForEach-Object {
#TargetUserSid
$_cur_OU = ([ADSI]"LDAP://<SID=$(($_.Properties[4]).Value.Value)>").distinguishedName
If ( $_cur_OU -like "*$_myOU" ) {
$_cur_OU
#LogonType
$_logontype[ [int] $_.Properties[8].Value ]
#Time-created
$_.TimeCreated
$_.Properties[18].Value
} >> $logFile
I am able to pipe the results to a file however, I would like to convert it to CSV/HTML When i try "convertto-HTML"
function it converts certain values . Also,
a) I would like to remove duplicate entries when the script runs only for that execution.
b) When the script is run, we may be able to search for records after the last run and not search in the same
records that we have looked into before.
PLEASE HELP !

If you just want to look for the new events since the last run, I suggest to record the EventRecordID of the last event you parsed and use it as a reference in your filter. For example:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[(EventID=4624 and
EventRecordID>46452302)]]</Select>
<Suppress Path="Security">*[EventData[Data[@Name="SubjectLogonId"]="0x0" or Data[@Name="TargetDomainName"]="NT AUTHORITY" or Data[@Name="TargetDomainName"]="Window Manager"]]</Suppress>
</Query>
</QueryList>
That's this logic that the Server Manager of Windows Serve 2012 is using to save time, CPU and bandwidth. The problem is how to get that number and provide it to your next run. You can store in a file and read it at the beginning. If not found, you
can go through the all event list.
Let's say you store it in a simple text file, ref.txt
1234
At the beginning just read it.
Try {
$_intMyRef = [int] (Get-Content .\ref.txt)
Catch {
Write-Host "The reference EventRecordID cannot be found." -ForegroundColor Red
$_intMyRef = 0
This is very lazy check. You can do a proper parsing etc... That's a quick dirty way. If I can read
it and parse it as an integer, I use it. Else, I just set it to 0 meaning I'll collect all info.
Then include it in your filter. You Get-WinEvent becomes:
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624 and EventRecordID>$_intMyRef)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0"" or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>"
At the end of your script, store the last value you got into your ref.txt file. So you can for example get that info in the loop. Like:
$Result += $LogonRecord
$_intLastId = $Event.RecordId
And at the end:
Write-Output $_intLastId | Out-File .\ref.txt
Then next time you run it, it is just scanning the delta. Note that I prefer this versus the date filter in case of the machine wasn't active for long or in case of time sync issue which can sometimes mess up with the date based filters.
If you want to go for a date filtering, do it at the Get-WinEvent level, not in the Where-Object. If the query is local, it doesn't change much. But in remote system, it does the filter on the remote side therefore you're saving time and resources on your
side. So for example for the last 30 days, and if you want to use the XMLFilter parameter, you can use:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[TimeCreated[timediff(@SystemTime) <= 2592000000]]]</Select>
</Query>
</QueryList>
Then you can combine it, etc...
PS, I used the confusing underscores because I like it ;)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Interactive report gives an error only for a specific user

An interactive report based on a very complicated select gives an error only when a specific user is logged on.
The error is:
ORA-00932: inconsistent datatypes: expected - got CLOB.
For other users logging using this page it works fine.
Authentication for this application is done using a stored function.
The query does not use the current userid in it.
Why does it fail for a specific user? if there is a problem, it should fail all the time.

Hi ankur,
By what you said the report dont have any date parameters or no date columns.
"Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
select to_date('01-DEC-06'),to_date('01-12-06') from dual;
Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
Hope its helpful.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

Defining an exit variable for a specific day based on Fiscal Period

If I do not have Calendar Day time dimension available for reporting is it possible to define a customer exit variable for a specific day. The days are the first and last day of the financial year?
Example
User Input for Fiscal Period: 2009004
The exit is to define a value for 01.01.2009 and 31.12.2008 (end of last year)
Thanks

Hello Niten,
yes it is possible. Procedure:
- add a new column in the report structure
- hide this column
- create a new text variable in this column (for customer exit)
- now you can fill this variable during query execution based on 0FISCPER
You don't want to filter by this variable. Right?
Buy,
André

Query Servers for a specific certificate

Similar Messages

Maybe you are looking for