Query showing less data than the listcube

Hi Gurus,
For the same keyfigure I am getting $20 less in the query but the LISTCUBE of the multiprovider is showing correct value compared to R/3.
Please extend your ideas.
Thanks
Nisha

Hi,
It is exactly the same filter criteria that I have put in the LISTCUBE which is pulling correct data in the list cube.
Thanks

Similar Messages

  • Downstream server has less updates than the Upstream server.

    Hi, I have a DSS (Downstream server) that syncs the metadata from a USS(Upstream server) at our place. I counted the number of updates in the database using the `IsLatestRevision` field in the revision table. They are different on both the WSUS servers.
    The DSS has less updates than the USS. The query is as follows. 
    SELECT COUNT(*)
      FROM [SUSDB].[dbo].[tbRevision]
      where IsLatestRevision=1
    Is this the proper way to count the number of updates, if yes, why there is a mismatch. 
    Please help, i am confused on this. Any help appreciated.

    Hi Suraj,
    is the downstream server configured in autonomous mode (the default), or is it in replica mode? It's only in replica mode that all of the updates will be replicated.
    If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :)

  • I've the iphone 4s, and My battery show me 40% than the phone shut down,some of my friends the same, from when i'll update the system os.

    I've the iphone 4s, and My battery show me 40% than the phone shut down,some of my friends the same, from when i'll update the system os.
    We've think that Apple do it for making the change of the phone!!  :O
    what will we have to do for making the downgrade of OS of the phone?
    tks Andrea

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    Apple has never supported downgrading of the iOS.

  • Input ready query is not showing loaded data in the cube

    Dear Experts,
    In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
    Thanks,
    Gopi R

    Hi,
    input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
    In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
    1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
    2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
    If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
    Regards,
    Gregor

  • Request for DataSource from Souce System has a lesser SID than the request

    Hi Experts,
    Request REQU_48Q572FT5LVYNE8BD4KOD5WTV(72.714) has not or not correctly been updated; Please edit
    Message no. RSM096
    Diagnosis
    Request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714) for DataSource 2LIS_13_VDKON from source system EP1CLNT410 has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object.
    This is not possible because the sequence of requests has to be followed.
    Delta- and init requests have to be updated to the DataStore object in the request sequence.
    Procedure
    First update request REQU_48Q572FT5LVYNE8BD4KOD5WTV(72.714) for DataSource 2LIS_13_VDKON from source system EP1CLNT410 from the PSA into the DataStore object.
    You can also set request REQU_48Q572FT5LVYNE8BD4KOD5WTV(&V2) to 'RED' in the monitor if this data is not required in the DataStore object. The request is then ignored during the check for completeness.
    Request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714 ) for DataSource
    2LIS_13_VDKON from source system EP1CLNT410 has the status green and a
    lesser SID (and is therefore older) than the request that you currently
    want to update into the DataStore object.
    This is not possible because the sequence of requests has to be
    followed.
    Delta- and init requests have to be updated to the DataStore object in
    the request sequence.
    First update request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714 ) for
    DataSource 2LIS_13_VDKON from source system EP1CLNT410 from the PSA into
    the DataStore object.
    You can also set request REQU_48Q572FT5LVYNE8BD4KOD5WTV (72.714 ) to
    'RED' in the monitor if this data is not required in the DataStore
    object. The request is then ignored during the check for completeness.
    The error is triggered in the process chain, the request is already green, how do i resolve this, i already tried RSRQ is showed the request green, do you have any more idea to resolve this?
    Thank you in advance.

    Hi Ver Baylon,
    After having deleted the request in the manage ODS you should run DTP not the info package again. Better yet I think you should do the following steps.
    1. Double click on the corresponding info package. Then go to scheduler on the top left tab of the window and click on the “initialization options for source system”. There delete all the queues that exist.
    2. Manage the PSA and delete all the requests
    3. Delete form manage the DSO all the requests from the DSO.
    Then go to the info package in the update tab and do a “Initialize without data transfer”
    In the next step do a delta update.
    After that execute a full DTP.
    Check the results then
    Hope that helps
    John

  • Status of data in Bex query shows wrong date

    Dear Experts,
    The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
    we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
    Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and  BI version is 7.0.
    Kindly please help for resolving the issue.
    Best Regards,
    Mannu.

    Hi Vijay,
    The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
    'Status of data' is not a filed. if it an information to tell the status of data in query result.
    Please find the following steps to find the 'status of data'
    go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
    Best Regards,
    Mannu

  • Showing less data at retrival time

    Hi Everyone,
    I have a datafile with me to load the data into cube.when i am loading the data it is loading succeesfully with out any error but at the time of retrival of data it is showing less when i compared with my original data.
    Then i checked the data in cube based on agents hierarchy and i observed data for some of the agents are loosing because that agent is parent for some members so the children data is overwriting the parent data when we run default calc all but i have the data for that parent itself in our data file.like
    for example
    A is parent B and C is children of A when we run default calc Band C data is overwriting the A's data but i have the data for 'A' also. like this i am loosing the data of A but i need to maintain the A' s data also.For this i created 'A' itself as a child under it and i renamed the parent A like A(Supervisor).
    like A(Supervisor)Parent and A,b,c are children
    Like this i am getting the correct data but i am doing all this modificaions manually by identifying manually.
    I have around 23000 agents are there with different hierarchies so i am getting very difficult to identify and add like this manually.
    Is there any script to write to solve this problem like if we miss any data is should take care about (or)
    Is there any other method to do this task faster.
    If any one knows please tell me how to proceed in this issue.
    Thanks in advance.
    Sravan

    You can create an adjustment account under A called A_adj, load data to A, B, and C, then before you consolidate, write a script that goes through and calculates the adjustment (A_adj) by taking the difference between A and B + C. "A_adj" = "A" - ("B"+"C");
    Now to get all this to work dynamically will take some work but using @CHILDREN and @CONCAT functions along with @CURRMBR, should get it done. As for performance, that would remain to be seen.
    Is there any particular reason why your supporting detail doesn't support the totals you are getting? Perhaps you should be going back to the source and getting a better data feed that has all the correct numbers in it. I know you can't always do that, but before engineering a big work around, I would take a pass at the source and see if you can get better data to begin with.

  • How to show grouped data in the same table?

    Hi,
    I am using JDev 11.1.1.2.0 with ADF 11g.
    I have a below requirement
    I have a tbl as below
    Columns -==> RC TL Code
    Data ==> 0 0 Prof
    0 1 Prin
    0 2 Tech
    1 0 Prin
    1 2 Prof
    I prepared a query with a grouping on TL so that I can show my data as below
    TL - 0
    RC Code
    0 Prof
    1 Prin
    TL - 1
    RC Code
    1 Prin
    TL - 2
    RC Code
    0 Tech
    2 Prof
    Really confused on to what type of component should I use and how can the component be repeated once dragged and dropped onto the canvas. Is this possible using ADF? If not what is the alternative?
    Thanks in advance.

    Hi Bharat,
      Unload the Repository and Delete the Table and fields in Hierarchy table and Recreate and reload the data.OIther wise you have to lot of manual work.
    Thanks
    Ganesh Kotti

  • BW Query showing more Material than R/3 Query, Why..??

    Hi All,
    I am facing problem when running the query on Inventory cube 0IC_C03.
    I have loaded data from 3 Data Sources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM as mentioned in below link and strictly followed by applying Marker updates after the load
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Now the problem is,
    End User trying to compare BW Inventory Query (Plant Analysis: Stock) values with MC.1 (Plant Analysis: Stock: Selection)
    In R/3 (MC.1) showing the total number of materials are 3755 for the period 01.2008
    In BW Query for the same period (01.2008) total number of materials are 3960
    I am doubting why BW showing more materials?, this resulting the differance value for Valueated Stock value and Valuated Stock Quantity when we compare with R/3.
    When i am comparing material wise in BW query with MC.1, whatever the missing Materials are showing in BW Query as 0 Quantity but some value
    Ex:    Values is =  -£ 51.46 and Quantity is = 0 EA
    Please provide me some inputs, your help will be appreciated.
    Regards,
    Rajesh

    Hi Rajesh,
    Please check the Material numbers which are coming extra in BW not in R/3 whether they are under any material group. If they are all in under the "#" material group then u can restrict the query by filtering the material group "#".
    Just filter Excluding the "#" material group in the query.
    Then you will get the right values.
    Hope this may help you.
    The difference between the BW and R/3 material numbers is because. Some extra materials may get from the UM datasource, so you are getting only values and not the quantities.
    Try the above idea. I hope it works.
    With Regards,
    Ravi Kanth.

  • Bex Query showing incorrect data

    Hi Experts,
    I have a Bex query on an infoset. The infoset is based on Sales Order Line Item DSO and Sales Order Condition DSO. I am refering Net value from Sales Order Line Item DSO. In the query, the values of Net Value is not coming correctly. When i check the value in Sales Order Line Item DSO it shows 100. However, in the query it shows 500. When i checked the infoset, it had 5 records. In each record, the net value was 100. What should i do to get the correct value of Net Value in the query.
    Have anyone faced similar problem ?
    Please reply as soon as possible.
    Thanks,
    Saachi

    Hi Sachi,
    This is a common problem in infoset.
    Sales order line item - SLI say
    Sales order condition - SC say.
    The value you see in your net value field depends on your join condition in the infoset.
    Currently you have join in such a way that 1 record in SLI correspods to 5 records in SLC (this is as per your join condition), hence you see this error. Youcan manupilate your join condition to get the required result, if this is viable.
    However, in most cases you may not be able to alleviate the fields defining the join.
    Say your sales order and item form the joining fields, then in sales order condition DSO you have 5 records for that sales order and item.
    The way you could probably avoid net value getting multiplied 5 times is by using exception aggregation  with reference char a characteristic in the query.
    The ref char should uniquely identify the 5 sales order item condition lines.
    (basic principle - we have to net value/ no of lines in Sales order condition DSO [5 in this case] .)
    The problem, however is, whenever you consider uniqueness defining fields, you would look at the keys of DSO, because they define uniqueness. One could have multiple infoobject when defining a DSO key.
    So you would'nt be able to define any record with only one particular infoobject(ref char), based on which you could define the  exception aggreation.
    You could define one more data field in the DSO which is a concatenation of all of its keys and then use it in exception aggreg as a reference char in the query.
    One more way is to load data from the two DSO to further cubes to achieve the requirement.
    I think, this is the limitation with the infoset.
    Please let me know if you find any other solution.
    Hope it helps,
    Regards,
    Sunmit.

  • Date Picker query showing "No Data Found", works in SQLPlus

    I have created 2 Date Picker items - P2_START_DATE and P2_END_DATE. I have set the format of these to 'DD-MON-YYYY'.
    This is the query I have to select the data based on the values from the date pickers:
    select sample_date,reading from meter_data where sample_date between to_date(:P2_START_DATE,'DD-MON-YYYY') and to_date(:P2_END_DATE,'DD-MON-YYYY') order by sample_date;
    The P2_START_DATE is '20-JAN-2011', the P3_END_DATE is '21-JAN-2011'.
    The query returns "No Data Found" when run in APEX, but when I run this in SQLPlus on the host I get data:
    select sample_date,reading from meter_data where sample_date between to_date('20-JAN-2011','DD-MON-YYYY') and to_date('21-JAN-2011','DD-MON-YYYY') order by sample_date
    20-JAN-2011 .39
    20-JAN-2011 .14
    20-JAN-2011 .14
    20-JAN-2011 .18
    21-JAN-2011 .13
    Can someone explain what I'm doing wrong? I have tried a few different formats, with no luck.
    TIA

    Hi Jeff,
    My Requirement is also looks like same, but am not able figure it out the reason why am getting no data found message in my chart(report).
    Requirement:
    I have a page, where two date picker(html5) items let say P30_FROM_DATE, P30_TO_DATE are there, apart from this i have one button as well,
    when the user select the from and to date from the date picker, and as soon as click on the button (SHOW), need to display the 2D Stacked Bar Char.
    so to achieve this, i have created a blank page, under region i have created a chart (2D Stacked Bar Chart), under items--> i have created two date picker items and one button.
    my query is
    SELECT NULL LINK,
           FLOW_STATUS_CODE LABEL,
           COUNT(ORDER_NUMBER) VALUE
      FROM
           OE_ORDER_HEADERS_ALL
    WHERE
           CREATION_DATE
           BETWEEN TO_DATE(:P30_FROM_DATE,'DD-MON-YYYY') AND TO_DATE(:P30_TO_DATE,'DD-MON-YYYY')
    GROUP BY FLOW_STATUS_CODE;
    Issue:
    Once i select the From and To Date, when am click on Show button, am not able to see as desired chart, instead am getting no data found message in the chart location.
    Can you please tell me how to do this.
    i would like to know that, how do i capture those two date item values in my query, and how do i initiate my report when am pressing button.
    please revert back to my below mail.
    Regards
    Santhosh Kumar. K
    [email protected]

  • Report shows no data in the Viewer

    Hello,
    i'm new to Crystal Reports and i have to develop a few Reports.
    I load the data with a stored procedure form a sql-server. This is working and i get all datas i need. But the Report Viewer doesn't show any data.
    I don't know why.
    If i do it over a select statement and not a stored procedure, the Report Viewer shows me each data set up to 9 times.
    I'm working with three tables.
    Here is the c# code i wrote.
    command = new SqlCommand();
    command.Connection = connection;
    command.CommandType = CommandType.StoredProcedure;
    SqlParameter myParam = new SqlParameter("@FormulareAuftragNr", SqlDbType.VarChar, 5);
    myParam.Value = AuftragNr;
    command.Parameters.Add(myParam);
    command.CommandText = "dbo.Abfrage_Arbeitsplan_Bericht";
    connection.Open();
    SqlDataAdapter dataAdapter = new SqlDataAdapter(command);
    ds = new DataSet("ABC");
    dataAdapter.Fill(ds, "dbo.Abfrage_Arbeitsplan_Bericht");
    druckarbeitsplan.SetDataSource(ds);
    CR Version : latest
    VS Version : 10.30319.1
    OS : Windows 7
    it is for an Windows App
    Johannes

    CR Version : latest
    That is not enough info. All my content below is based on the assumption that you are using CRVS2010 (V. 13.x)...
    The code does not show you loading an actual report(?). Also, I'm assuming that after:
    druckarbeitsplan.SetDataSource(ds);
    you have code to show the report in the viewer or you're printing  exporting the report?
    For datasets see [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533323335333433333332%7D.do] KB. Also, make sure you are using the full 4.0 framework, not the client framework.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • ICal still shows previous day in ical proper, but shows current date in the dock

    iCal is open in the MONTH, on my desktop permanently, but it continually shows yesterdays date.  It isn't till I actually click on the following day in iCal proper that the date changes to the current date. The iCal icon on the dock works fine with no issues.  When I first purchased the iMac iCal worked aok.  Software is continually updated.

    I have the same issue. I am also running iCal 5.0.2 under Lion 10.7.3. It worked fine for me on Lion 10.7.2, and it still works ok for me on my iPhone 4 running iOS 5.1. It does look like a bug to me. I have the issue connecting to a Google Calendar as well as to another (non-Apple) CalDAV server.
    Let me know if you call Apple Support to report this issue.

  • Service Level Tracking Reports show no data from the data warehouse db.

    Hi, I have some Service Level Tracking reports that will only show data from the last few days.  If I select last month as the time frame, there is no data displayed.  All of these reports have previously worked fine.  Nothing to my knowledge
    has changed, and it appears that the data is still being collected in the data warehouse database.  Any thoughts would be greatly appreciated.

    Is this meant for SCOM forum
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Finder has a different date than the one in iphoto for date created

    ok...I found a bunch of pics that have the wrong date created. I changed it in iphoto. I also tried changing it in photoshop bridge. However, the finder is still using some weird date for the date created. Why is this? It's effecting my picture frame.

    I have a similar problem. I've downloaded a ton of pictures covering 5 months of touring into file folders on the computer. When I view those in the finder and ask to show the creation dates it lists them correctly. I then imported the pictures into iPhoto, and again, the creation dates are correct. Now when I drag selected pictures out of iPhoto into a desktop folder to be placed onto a digital picture frame, the creation dates all show the date and time they were imported into iPhoto.
    Is there a way to keep the original creation dates with those pictures when pulling them from iPhoto? If not I will have to go back to the original files and sort thru them using preview or some other method. I have tried this and the dates are preserved in the newly composed folder for importing to the picture frame, but it is really time consuming.
    John

Maybe you are looking for