Query sometimes returns no results

In our project, we have some EJB2.1 CMP beans with a redirect finder. The Redirect finder uses Toplink expression to build a ReadAllQuery. The expression provides a kind of findByExample implementation which toplink does not support for Entity beans. During testing the method the query results are most of the time as expected, however sometimes no objects are returned.
I did some debugging and comparison of log file in case of the correct case and the case where it goes wrong. The difference is in the result of method expression.doesConform(). In the correct case, the following exception is thrown (the text is translated from dutch, so it will differ from original english message):
[TOPLINK-6092] (TopLink (Oracle OC4J CMP) - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException
Description exception: A non instantiated ValueHolder has been detected. Instantiate the Valueholders before execute this query in memory.
In the case where it goes wrong (no results), the doesConform method simply returns false.
I assume it has to do with in-memory querying, and I have tried to change some of the setting available (caching, conform result in unit of work,..). all of those did not solve the problem.
Hope somebody can help me out here.

We found a workaround for this problem.
Our expression contained a LIKE "%%%:%%" or something similar, but the important thing here that if subsequent % are the cause of the problem. when we remove the subsequent % (so we have "%:%") then the result of the query is always the same.
Although I don't understand what the cause of the problem is, we have a solution for this issue.

Similar Messages

Basic NOT EXISTS query not returning any results

DB Version: 10gR2
One of our tables in the test schema is having less number of columns than the PROD shema.
To determine which are missing columns in this table in Test schema i did the following.
-----In Test Schema
CREATE TABLE XYZ2
(COL1 NUMBER);        ----------only one column
SQL > CREATE TABLE tables_test_list AS SELECT TABLE_NAME,COLUMN_NAME FROM USER_TAB_COLS;
Table created.--- In the prod schema
SQL> CREATE TABLE XYZ2
2 (COL1 NUMBER,
3 COL2 NUMBER       ----------- same table name with an extra column
4 );
Table createdAnd from the PROD schema i execute the following SQL to determine what are the columns that are missing in the TEST schema
select column_name from User_Tab_Cols outer
where table_name='XYZ2'
and not exists (select 1 from TEST_SCHEMA.tables_test_list inner where outer.TABLE_NAME=inner.TABLE_NAME )But the above query is not returning any results. Any idea why?

Actually, the example from the link I posted earlier:
[email protected]> (
2 select 'IN T1, NOT T2', column_name,data_type,data_length
3    from user_tab_columns
4   where table_name = 'T1'
5 MINUS
6 select 'IN T1, NOT T2', column_name,data_type,data_length
7    from user_tab_columns
8   where table_name = 'T2'
9 )
10 UNION ALL
11 (
12 select 'IN T2, NOT T1', column_name,data_type,data_length
13    from user_tab_columns
14   where table_name = 'T2'
15 MINUS
16 select 'IN T2, NOT T1', column_name,data_type,data_length
17    from user_tab_columns
18   where table_name = 'T1'
19 )
20 /

IPTObjectManager.Query not returning correct result (Java)

Hi,
I am having a problem with the IPTObjectManager.Query method. The code is given below. The issue I am having is, that when I search for a community in a specific folder not results are returned. However if I search in all folders (using -1 as the second parameter to the method) it returns multiple communities including the one I need. Anyone else had the same issue with this??
// THIS CODE WORKS AND RETURN MULTIPLE COMMUNITIES
// THE hotelCode VARIABLE IS A STRING VARIABLE CONTAINING A VALUE
// WHICH IS THE COMMUNITY NAME.
// Create a ObjectManager object
IPTObjectManager objectManager = session.GetObjectManagers(ObjectClass.Community.toInteger());
// define the query based on the passed string
Object[][] vQueryFilter = {
     new Object[]{new Integer(PT_PROPIDS.PT_PROPID_NAME)},
     new Object[]{new Integer(PT_FILTEROPS.PT_FILTEROP_CONTAINS)},
     new Object[]{hotelCode}};
// Run the query and return results
IPTQueryResult ptQueryResult = objectManager.Query(
     PT_PROPIDS.PT_PROPID_ALL, -1, PT_PROPIDS.PT_PROPID_NAME, 0, -1, vQueryFilter);
// THIS CODE DOES NOT WORK. I AM PASSING IS THE FOLDER ID OF THE
// FOLDER WHICH CONTAINS THE COMMUNITY
// Create a ObjectManager object
IPTObjectManager objectManager = session.GetObjectManagers(ObjectClass.Community.toInteger());
// define the query based on the passed string
Object[][] vQueryFilter = {
     new Object[]{new Integer(PT_PROPIDS.PT_PROPID_NAME)},
     new Object[]{new Integer(PT_FILTEROPS.PT_FILTEROP_CONTAINS)},
     new Object[]{hotelCode}};
// Run the query and return results
IPTQueryResult ptQueryResult = objectManager.Query(
     PT_PROPIDS.PT_PROPID_ALL, 303, PT_PROPIDS.PT_PROPID_NAME, 0, -1, vQueryFilter);

I don't know about G6, however in version 5 there does not appear an easy way of doing it. I guess the "easiest" way would be to query sub-folders first, build and array of their ids, and then query for communities in those folders. This is using server API. Something like this (.NET):
publicvoidGetFolderCommunities(intfolderId){    IPTAdminFolder folder =this.session.GetAdminCatalog().OpenAdminFolder(folderId, false);    IPTQueryResult qr =folder.QuerySubfolders(PT_PROPIDS.PT_PROPID_ALL, [b]1, null, 0, -1, newobject[][] {             newobject[] { PT_PROPIDS.PT_PROPID_FOLDER_FOLDERTYPE }, newobject[] { PT_FILTEROPS.PT_FILTEROP_EQ } , newobject[] { PT_ADMIN_FOLDER_TYPES.PT_ADMIN_FOLDER_TYPE_COMMUNITYFOLDER } } ); int[] folderIds =newint[qr.RowCount()]; Console.WriteLine("------ sub-folders for communities -------"); for(inti =0; i <qr.RowCount(); i++) {        intobjectId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_OBJECTID);        stringobjectName =qr.ItemAsString(i, PT_PROPIDS.PT_PROPID_NAME);        intparentFolderId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_FOLDER_PARENTFOLDERID);        folderIds[i] =objectId; Console.WriteLine("{0}: {1}; parent: {2}", objectId, objectName, parentFolderId); } qr =this.session.GetCommunities().Query( PT_PROPIDS.PT_PROPID_ALL, -1, (object) null, 0, -1, newobject[][] {            newobject[] { PT_PROPIDS.PT_PROPID_FOLDERID }, newobject[] { PT_FILTEROPS.PT_FILTEROP_IN } , newobject[] { folderIds } } ); Console.WriteLine("------ communities from sub-folders -------"); for(inti =0; i <qr.RowCount(); i++) {        intobjectId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_OBJECTID);        stringobjectName =qr.ItemAsString(i, PT_PROPIDS.PT_PROPID_NAME);        int parentFolderId =qr.ItemAsInt(i, PT_PROPIDS.PT_PROPID_FOLDERID);        Console.WriteLine("{0}: {1}; folder: {2}", objectId, objectName, parentFolderId); }}
Or you could use EDK RPC search. Again, in .NET:
publicvoidSearchForCommunities(intfolderId){ IPortalSearchRequest searchRequest =this.ptSession.GetSearchFactory().CreatePortalSearchRequest(); searchRequest.SetObjectTypesToSearch(newObjectClass[] { ObjectClass.Community }); searchRequest.SetDocFoldersToSearch(newint[] {}, true); searchRequest.SetAdminFoldersToSearch(newint[] { folderId}, true); searchRequest.SetResultsCount(0, 100); searchRequest.SetResultsOrderBy(PortalField.OBJECT_ID); searchRequest.SetFieldsToReturn(newPlumtreeField[] {}); searchRequest.SetQuery("*"); ISearchResponse searchResponse =searchRequest.Execute(); intreturnedMatches =searchResponse.GetReturnedCount(); ISearchResultSet resultSet =searchResponse.GetResultSet(); IEnumerator enumerator =resultSet.GetResults(); while(enumerator.MoveNext()) { ISearchResult result =(ISearchResult) enumerator.Current; Console.WriteLine( result.GetFieldAsInt(PortalField.OBJECT_ID) +": "+ result.GetFieldAsString(PlumtreeField.NAME) ); }}
Ruslan.

Search-Mailbox Search Query not returning correct results.

Hi,
I'd appreciate some assistance with the search and delete I'm trying to I'm run.
I'm using the following command to find messages with a certain message class received before 01/01/14 in a mailbox.
Get-Mailbox xxxxxxxxxxxxxxx | Search-Mailbox -SearchQuery '(Received:< 01/01/14) AND ("IPM.Note.Worksite.Ems.Filed")' -EstimateResultOnly | select displayname, success, resultitemscount,Resultitemssize
When I first ran the command it returned 130,000 items, I ran it again with a -DeleteContent switch, all the items were successfully removed from the mailbox, great! However, when I look in the mailbox I can see ~1000 items with the message class in the command
and dated 2013 or earlier, they meet the search criteria so I don't understand why when I run the command again it returns 0 items.
Help!

Hello,
Based on your description, your cmdlet is ok.
When you run the cmdlet with a -DeleteContent switch, the messages are not delete permanently. please try to run the cmdlet with a -DeleteContent switch and -Force switch to check the result.
Besides, please use get-mailboxstatistics | fl cmdlet to check information about mailbox.
Cara Chen
TechNet Community Support

SCCM query not returning the results I want

I would like to use a query that will query my systems that have a particular piece of software (Flash), but I do not want it to include servers that are in a particular group.
Explanation: I have about 20 servers with Flash installed that require it. About half of them I can update regularly, the other half I can't. So, I have an AD group for each - the ones I can patch, and the ones I can't. I want the query
to look for systems with "Adobe Flash" in the display name, but exclude the servers in both of these groups. That way I can create a collection of computers that have Flash installed where it shouldn't be and can keep an eye on where it is
being installed.
The query looks like this in the criteria tab;
Add/Remove Programs.Display Name is like "%Adobe Flash%"
and
System Resource.System Group Name is not equal to "LAB\FlashPatchGroup"
The query language looks like this;
select distinct SMS_R_System.Name, SMS_R_System.description, SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName, SMS_G_System_ADD_REMOVE_PROGRAMS.Version from SMS_R_System inner join SMS_G_System_ADD_REMOVE_PROGRAMS on SMS_G_System_ADD_REMOVE_PROGRAMS.ResourceID
= SMS_R_System.ResourceId where SMS_G_System_ADD_REMOVE_PROGRAMS.DisplayName like "%Adobe Flash%" and SMS_R_System.SystemGroupName != "LAB\\FlashPatchGroup"
The problem I am having is that when I run the query, it is pulling everything with Flash, including the ones in the AD group. Anyone see a problem with the way I'm doing this?

Hi Jorgen,
Thank you for that - very helpful because I actually knew nothing about sub-select queries. So now the overall logic makes sense, but unfortunately the only examples I've been able to find don't cover exactly what I want to do.
The overall examples I have found work like this;
- Create a query to find computers with a particular application installed
- Create a subselect query that says find users that are NOT subject to the preceeding query
What I need to do, however, is this;
- A query finds computers with a particular piece of software installed
- It compares the computer to 2 Active Directory groups I have created.
- The query produces all computers with that particular piece of software that is NOT in the AD groups I have created. This way I can easily identify servers that have Flash installed that shouldn't.
Any ideas? I have been trying to follow the subselect queries to do something similar but I just cannot make it work. I've tried to create a subselect query that says "Add/Remove Programs Display Name contains "%Adobe Flash%" but is not in (subselect
query)" and it just doesn't like it.
Regards
Juice

SQL Query Not Returning Correct Results

I am trying to pull all records that are set for mailing and
are from every state except for Nebraska and some counties in Iowa.
It isn't pulling correctly. Any help would be greatly appreciated.
SELECT HS_SATCode.School, HS_SATCode.Add1, HS_SATCode.City,
HS_SATCode.State, HS_SATCode.[Zip Code], HS_SATCode.county,
HS_SATCode.mail_list
FROM HS_SATCode
WHERE (((HS_SATCode.State)<>'NE') AND
((HS_SATCode.mail_list)=1)) OR (((HS_SATCode.State)='IA') AND
((HS_SATCode.county)<>'Adair' And
(HS_SATCode.county)<>'adams' And
(HS_SATCode.county)<>'audubon' And
(HS_SATCode.county)<>'buena vista' And
(HS_SATCode.county)<>'calhoun' And
(HS_SATCode.county)<>'carroll' And
(HS_SATCode.county)<>'cass' And
(HS_SATCode.county)<>'cherokee' And
(HS_SATCode.county)<>'clay' And
(HS_SATCode.county)<>'crawford' And
(HS_SATCode.county)<>'dickinson' And
(HS_SATCode.county)<>'fremont' And
(HS_SATCode.county)<>'greene' And
(HS_SATCode.county)<>'guthrie' And
(HS_SATCode.county)<>'harrison' And
(HS_SATCode.county)<>'ida' And
(HS_SATCode.county)<>'lyon' And
(HS_SATCode.county)<>'mills' And
(HS_SATCode.county)<>'monona' And
(HS_SATCode.county)<>'montgomery' And
(HS_SATCode.county)<>'o''brien' And
(HS_SATCode.county)<>'osceola' And
(HS_SATCode.county)<>'page' And
(HS_SATCode.county)<>'pottawattamie' And
(HS_SATCode.county)<>'plymouth' And
(HS_SATCode.county)<>'ringold' And
(HS_SATCode.county)<>'sac' And
(HS_SATCode.county)<>'shelby' And
(HS_SATCode.county)<>'sioux' And
(HS_SATCode.county)<>'tayland' And
(HS_SATCode.county)<>'union' And
(HS_SATCode.county)<>'woodbury') AND
((HS_SATCode.mail_list)=1))
ORDER BY HS_SATCode.mail_list, HS_SATCode.State,
HS_SATCode.county

Wow, that's a lotta brackets. And most of them are
unnecessary. Let's reduce it a bit.
WHERE
HS_SATCode.State)<>'NE' AND HS_SATCode.mail_list =1
OR (HS_SATCode.State='IA' AND
HS_SATCode.county<>'Adair' )
Can you see how this will send mail to Nebraska?

Design a procedure which returns a result set of a select Query

Hi...
Can some one help me out with a brief design or work around for creating a stored procedure which runs a select Query and Returns a result set...
If not a stored procedure, at least a function which makes the job simple....
Awaiting help in this regard ........

Hi...
I am sorry for providing insufficient Info...
Actually I am using Oracle 10G DB...
I have a select Query..
Since I am a part of team which is building a Complete Data Driven site, Even an SQL Query and a PL/SQL function body was stored in the Table itself to bring in some kind of Dynamism in the site.... But the master table was loaded with a lot of data and hence Now we decided to Store everythin in a generic package..
I used REF CURSORS to store a result set of a simple SELECT Query.... and declaring it as an out parameter in my Procedure body so that the JAVA team can directly access the Procedure from the JAVA layer....
Now I want to know can I do anything more efficient to carry out the above operation....

WMI Query to SCCM 2012 results zero results in c#

In 2007 this works without issues, however in 2012 when attempting the 2nd query it returns zero results. However if I do this manually I can produce results...Here is my code:
using (WqlConnectionManager connection = Connect(getServer))
   string query = "select * from SMS_ObjectContainerItem WHERE ContainerNodeID='" + ProfileID + "'";
   foreach (IResultObject getobject in connection.QueryProcessor.ExecuteQuery(query))
     getPackageID = getobject["InstanceKey"].StringValue;
     query = "select * from SMS_Collection WHERE CollectionID='" + getPackageID + "'";
**This is where it will return zero results**
     foreach (IResultObject searchID in connection.QueryProcessor.ExecuteQuery(query))
        CMProfiles profile = new CMProfiles();
        profile.Name = searchID["Name"].StringValue;
        profile.ID = getPackageID;
        results.Add(profile);
I'm pulling my hairs trying to understand by the 2nd query is not returning any results. When this works fine in SCCM 2007

What you are using here are the SDK libraries, which are admittedly very thin wrappers around WMI, but not quite. Have you tried implementing this directly using WMI? I have written software that manipulates 2007 / 2012 and eventually found that
the SDK libraries just sort of got in my way, so now I do all of my interactions with SCCM directly with WMI and forgoe the SDK libraries.
Before I changed over, I did find that there are some oddities in using the SDK. What I eventually found that worked for me was to bind to the 2007 SDK libraries, deliver them with my application and use the 2007 libraries regardless of if I was connecting
to 2007 or 2012. What I found was that I would run into issues using the 2012 libraries to talk to 2007, but the 2007 libraries would work fine with both.
I have tested your queries, directly using WMI and PowerShell on a 2012 server and they work fine. I am presuming that the folder that you are attempting to access is a Device Collection folder.
Once again, I would suggest using WMI directly, especially if making a product that will work with 2007 and 2012; you will be a much happier person.
It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link.

How to Display Columns when Query is returning No Columns?

I am Creating a Load Status Dash Board and I want to Dispaly Columns when Load is Not Started too. As of Now My query is returning no Results which needs to Modified and Display Columns and Status Not Started to it? Could you please suggest any solutions to it? Thanks

Hi,
if you like to show a message instead of NO RESULTS . then you could easily get it by changing the custom text in the properties
if you want it in a table format . you need to have a table with some data according to the reporting requirement
thanks

Query returning zero results for yesterdays same hour

I have the following query:
SELECT
d_dtm,
BTS_ID,
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
END AS "LASTATT",
sum(V_ATT_CNT) as "V_ATT_CNT",
CASE WHEN D_DTM = D_DTM
THEN sum(V_ATT_CNT)
END AS "ATT"
FROM
DMSN.DS3R_FH_1XRTT_FA_LVL_KPI
WHERE
to_date(D_DTM, 'DD/MM/yyyy') >= (SELECT TO_DATE(max(D_DTM),'DD/MM/YYYY') FROM DMSN.DS3R_FH_1XRTT_FA_LVL_KPI)-2
GROUP BY
d_dtm,
BTS_ID
having
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
END > 0
But it is not returning any results because of the "having" clause. I know it should return results because all I want it to do is in one column have the V_ATT for the current time period, and in the 2nd column, have the V_ATT 24 hours ago. I've checked the data and I should get results back but can't seem to figure out why this is not working...
Edited by: k1ng87 on Apr 22, 2013 1:03 PM

Hi,
k1ng87 wrote:
I have the following query:
SELECT
d_dtm,
BTS_ID,
CASE WHEN D_DTM = (D_DTM-24/24)
THEN sum(V_ATT_CNT)
END AS "LASTATT",
...You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (including, but not limited to, code) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
That's just one of many useful things found in the forum FAQ {message:id=9360002}
But it is not returning any results because of the "having" clause. You're right:HAVING CASE
     WHEN d_dtm = (d_dtm - 24/24)
     THEN SUM (v_att_cnt)
     END > 0
Whatever d_dtm is, it's not d_dtm - 24/24, so the WHEN condition will never be TRUE. That means the CASE expression will always return NULL, and NULL is not greater than 0, so the HAVING condition will never be TRUE.
k1ng87 wrote:
confused on what I'm missing here...I'm using version 11g, not sure if that matters for this ? though....There is no version 11f or 11h, so it's kind of silly to say you're using 11g. Why not give your actual version number, like 11.2.0.2.0? Sometimes, the part after 11 makes a huge difference.
But probably not in this case, as you said.   What's more important is for you to post CREATE TABLE and INSERT statements for a little sample data, and the results you want from that sample data.
No kidding; see the forum FAQ {message:id=9360002}.

CONNECT BY query doesn't return any results...

Hi All
I am trying to execute this CONNECT BY query...but it does not return any result.
Could anyone please suggests what am I doing wrong. Or how should I modify the query to get the results.
SELECT Distinct dt.DID FROM DEPT dt left outer join EMPLOYEE emp on dt.DID = emp.DID WHERE dt.parentid in (SELECT DEPT.DID FROM DEPT CONNECT BY PRIOR DEPT.DID = DEPT.PARENTID START WITH DEPT.PARENTID in (2000,-2000)) or dt.parentid=2000
Any help would be really really appreciated.
Thanks and Regards
-Josef

Take the nested query and run it in SQL developer (or SQL Plus) against the database directly. Does it give any results? That query returning no results is the most likely cause of the problem.

Same Query returning different result (Different execution plan)

Hi all,
To day i have discovered a strange thing: a query that return a different result when using a different execution plan.
The query :
SELECT *
FROM schema.table@database a
WHERE     column1 IN ('3')
       AND column2 = '101'
       AND EXISTS
              (SELECT null
                 FROM schema.table2 c
                WHERE a.column3 = SUBSTR (c.column1, 2, 12));where schema.table@database is a remote table.
when executed with the hint /*+ ordered use_nl(a c) */ these query return no result and its execution plan is :
Rows     Row Source Operation
      0 NESTED LOOPS (cr=31 r=0 w=0 time=4894659 us)
   4323   SORT UNIQUE (cr=31 r=0 w=0 time=50835 us)
   4336    TABLE ACCESS FULL TABLE2 (cr=31 r=0 w=0 time=7607 us)
      0   REMOTE (cr=0 r=0 w=0 time=130536 us)When i changed the execution plan with the hint /*+ use_hash(c a) */
Rows     Row Source Operation
   3702 HASH JOIN SEMI (cr=35 r=0 w=0 time=497839 us)
22556   REMOTE (cr=0 r=0 w=0 time=401176 us)
   4336   TABLE ACCESS FULL TABLE2 (cr=35 r=0 w=0 time=7709 us)It seem that when the execution plan have changed the remote query return no result.
It'is a bug or i have missed somthing ?
PS: The two table are no subject to insert or update statement.
Oracle version : 9.2.0.2.0
System version : HP-UX v1
Thanks.

H.Mahmoud wrote:
Oracle version : 9.2.0.2.0
System version : HP-UX v1Hard to say. You're using a very old and deprecated version of the database, and one that was known to contain bugs.
9.2.0.7 was really the lowest version of 9i that was considered to be 'stable', but even so, it's old and lacking in many ways.
Consider upgrading to the latest database version at your earliest opportunity. (or at least apply patches up to the latest 9i version before querying if there is bugs in your really low buggy version)

Returning a result set/record from a dynamic query

There seems to be plenty of examples for using Native Dynamic Sql to formulate and execute a dynamic query, however there are no examples of returning a result set or records which contain the rows of data that are retrieved by executing the query. Could someone give us an example?

Welcome to the Oracle forum....
CREATE OR REPLACE PACKAGE curspkg_join AS
TYPE t_cursor IS REF CURSOR ;
Procedure open_join_cursor1 (n_EMPNO IN NUMBER, io_cursor IN OUT t_cursor);
END curspkg_join;
Create the following Oracle package body on the Oracle server:
CREATE OR REPLACE PACKAGE BODY curspkg_join AS
Procedure open_join_cursor1 (n_EMPNO IN NUMBER, io_cursor IN OUT t_cursor)
IS
v_cursor t_cursor;
BEGIN
IF n_EMPNO <> 0
THEN
OPEN v_cursor FOR
SELECT EMP.EMPNO, EMP.ENAME, DEPT.DEPTNO, DEPT.DNAME
FROM EMP, DEPT
WHERE EMP.DEPTNO = DEPT.DEPTNO
AND EMP.EMPNO = n_EMPNO;
ELSE
OPEN v_cursor FOR
SELECT EMP.EMPNO, EMP.ENAME, DEPT.DEPTNO, DEPT.DNAME
FROM EMP, DEPT
WHERE EMP.DEPTNO = DEPT.DEPTNO;
END IF;
io_cursor := v_cursor;
END open_join_cursor1;
END curspkg_join;
Dim Oraclecon As New OracleConnection("Password=pwd;" & _
"User ID=uid;Data Source=MyOracle;")
Oraclecon.Open()
Dim myCMD As New OracleCommand()
myCMD.Connection = Oraclecon
myCMD.CommandText = "curspkg_join.open_join_cursor1"
myCMD.CommandType = CommandType.StoredProcedure
myCMD.Parameters.Add(New OracleParameter("io_cursor", OracleType.Cursor)).Direction = ParameterDirection.Output
myCMD.Parameters.Add("n_Empno", OracleType.Number, 4).Value = 123
Dim myReader As OracleDataReader
Try
myCMD.ExecuteNonQuery()
Catch myex As Exception
MsgBox(myex.Message)
End Try
myReader = myCMD.Parameters("io_cursor").Value
Dim x, count As Integer
count = 0
Do While myReader.Read()
For x = 0 To myReader.FieldCount - 1
Console.Write(myReader(x) & " ")
Next
Console.WriteLine()
count += 1
Loop
MsgBox(count & " Rows Returned.")
myReader.Close()
Oraclecon.Close()
The above code is working in one of our application; which is using ref cursor as result set and get from procedure. I hope you can found more code by google and/or search in this forum as well; if above code is not useful to you.
HTH
Girish Sharma

Content Query Web Part filter not returning any results

This CQWP stopped working after moving a number of files to new locations. It is configured in the following way:
Source: Show items from the following site and all subsites
List type: Pages Library
We want to filter the list by the article date, last 30 days. Without a filter, results are returned. If ANY filtering is applied, NO results are returned, NO error messages.
I experimented with "Group items by" filter, but it also resulted in no results.
If I change the Source field to a subfolder, I can return filtered results.
Any ideas?

Make sure that ItemStyle.xslt is working fine, try to change the item style
for your content query web part, if it shows data then there your custom defined
item style is not working properly

Query returning No result

Hi,
I installed Oracle Express Edition 10g in my system.
I ran a very simple query:
Select * from person where status = 100
where status is NUMBER(9) NOT NULL but it does not returning any result.
Any Idea? Is this because of Express Edition version?
Thank You.

You've been asked twice to show us a copy/paste of a query which you've not done.
Fire up SQLPlus, run the command asked of you, and copy and then paste the results into a post (enclosing it in the tags to preserve formatting).
It's much easier to help you when you try and help us by following along with suggestions.

Query sometimes returns no results

Similar Messages

Maybe you are looking for