CONNECT BY query doesn't return any results...

Hi All
I am trying to execute this CONNECT BY query...but it does not return any result.
Could anyone please suggests what am I doing wrong. Or how should I modify the query to get the results.
SELECT Distinct dt.DID FROM DEPT dt left outer join EMPLOYEE emp on dt.DID = emp.DID WHERE dt.parentid in (SELECT DEPT.DID FROM DEPT CONNECT BY PRIOR DEPT.DID = DEPT.PARENTID START WITH DEPT.PARENTID in (2000,-2000)) or dt.parentid=2000
Any help would be really really appreciated.
Thanks and Regards
-Josef

Take the nested query and run it in SQL developer (or SQL Plus) against the database directly. Does it give any results? That query returning no results is the most likely cause of the problem.

Similar Messages

SQL Query (PL/SQL Function Body returning SQL query) doesn't return any row

I have a region with the following type:
SQL Query (PL/SQL Function Body returning SQL query).
In a search screen the users can enter different numbers, separated by an ENTER.
I want to check these numbers by replacing the ENTER, which is CHR(13) || CHR(10) I believe, with commas. And then I can use it like this: POD IN (<<text>>).
It's something like this:
If (:P30_POD Is Not Null) Then
v_where := v_where || v_condition || 'POD IN (''''''''||REPLACE(''' || :P30_POD || ''', CHR(13) || CHR(10), '','')||'''''''''')';
v_condition := ' AND ';
End If;
But the query doesn't return any rows.
I tried to reproduce it in Toad:
select * from asx_worklistitem
where
POD IN (''''||REPLACE('541449200000171813'||CHR(13) || CHR(10)||'541449206006341366', CHR(13) || CHR(10), ''',''')||'''')
==> This is the query that does't return any rows
select (''''||REPLACE('541449200000171813'||CHR(13) || CHR(10)||'541449206006341366', CHR(13) || CHR(10), ''',''')||'''')
from dual;
==> This returns '541449200000171813','541449206006341366'
select * from asx_worklistitem
where pod in ('541449200000171813','541449206006341366');
==> and when I copy/paste this in the above query, it does return my rows.
So why does my first query doesn't work?
Doe anyone have any idea?
Kind regards,
Geert
Message was edited by:
Zorry

Thanks for the help.
I made it work, but via the following code:
If (:P30_POD Is Not Null) Then
v_pods := REPLACE(:P30_POD, CHR(13) || CHR(10));
v_where := v_where || v_condition || 'POD IN (';
v_counter := 1;
WHILE (v_counter < LENGTH(v_pods)) LOOP
v_pod := SUBSTR(v_pods, v_counter, 18);
IF (v_counter <> 1) THEN
v_where := v_where || ',';
END IF;
v_where := v_where || '''' || v_pod || '''';
v_counter := v_counter + 18;
END LOOP;
v_where := v_where || ')';
v_condition := ' AND ';
End If;But now I want to make an update of all the records that correspond to this search criteria. I can give in a status via a dropdownlist and that I want to update all the records that correspond to one of these POD's with that status.
For a region you can build an SQL query via PL/SQL, but for a process you only have a PL/SQL block. Is the only way to update all these records by making a loop and make an update for every POD that is specified.
Because I think this will have a lot of overhead.
I would like to make something like a multi row update in an updateable report, but I want to specify the status from somewhere else. Is this possible?

Query with subquery containing group clause doesn't return any rows - WHY ?

Hi,
My query doesn't return any values :
select g1.NTRX from gtrx g1
where exists
(SELECT b.cfunctrx, b.cpro1trx, b.nmsgitrx, b.nmrc, b.ncrd, b.namtstrx,
b.dltimtrx, b.nrtrftrx,count(*)
FROM gtrxacq a, gtrx b
WHERE a.ntrx = b.ntrx AND a.acq_bus_date = (SELECT curr_bus_date -1
FROM gmbr
WHERE nmbr = 0)
and g1.NTRX=b.NTRX
GROUP BY b.cfunctrx,
b.cpro1trx,
b.nmsgitrx,
b.nmrc,
b.ncrd,
b.namtstrx,
b.dltimtrx,
b.nrtrftrx
HAVING COUNT (*) > 1);
but such query returns some number of rows :
SELECT b.cfunctrx, b.cpro1trx, b.nmsgitrx, b.nmrc, b.ncrd, b.namtstrx,
b.dltimtrx, b.nrtrftrx,count(*)
FROM gtrxacq a, gtrx b
WHERE a.ntrx = b.ntrx AND a.acq_bus_date = (SELECT curr_bus_date -1
FROM gmbr
WHERE nmbr = 0)
/*and g1.NTRX=b.NTRX*/
GROUP BY b.cfunctrx,
b.cpro1trx,
b.nmsgitrx,
b.nmrc,
b.ncrd,
b.namtstrx,
b.dltimtrx,
b.nrtrftrx
HAVING COUNT (*) > 1
AND when i put results from query above into query :
select g1.NTRX from gtrx g1
where
g1.CFUNCTRX= 200 and g1.CPRO1TRX= 000 and g1.NMSGITRX= 1240 and
g1.NMRC= '000000000000675' and g1.NCRD= 405671**********
and g1.NAMTSTRX=14.26 and g1.DLTIMTRX=to_date('07/08/2008 15:07:02','MM/DD/YYYY HH24:MI:SS')
and g1.NRTRFTRX= '000414598393';
it returns values.
what is wrong ?
Best Regards Arkadiusz Masny

but such query returns some number of rows :
/*and g1.NTRX=b.NTRX*/Add b.NTRX into group by and recheck.

Basic NOT EXISTS query not returning any results

DB Version: 10gR2
One of our tables in the test schema is having less number of columns than the PROD shema.
To determine which are missing columns in this table in Test schema i did the following.
-----In Test Schema
CREATE TABLE XYZ2
(COL1 NUMBER);        ----------only one column
SQL > CREATE TABLE tables_test_list AS SELECT TABLE_NAME,COLUMN_NAME FROM USER_TAB_COLS;
Table created.--- In the prod schema
SQL> CREATE TABLE XYZ2
2 (COL1 NUMBER,
3 COL2 NUMBER       ----------- same table name with an extra column
4 );
Table createdAnd from the PROD schema i execute the following SQL to determine what are the columns that are missing in the TEST schema
select column_name from User_Tab_Cols outer
where table_name='XYZ2'
and not exists (select 1 from TEST_SCHEMA.tables_test_list inner where outer.TABLE_NAME=inner.TABLE_NAME )But the above query is not returning any results. Any idea why?

Actually, the example from the link I posted earlier:
[email protected]> (
2 select 'IN T1, NOT T2', column_name,data_type,data_length
3    from user_tab_columns
4   where table_name = 'T1'
5 MINUS
6 select 'IN T1, NOT T2', column_name,data_type,data_length
7    from user_tab_columns
8   where table_name = 'T2'
9 )
10 UNION ALL
11 (
12 select 'IN T2, NOT T1', column_name,data_type,data_length
13    from user_tab_columns
14   where table_name = 'T2'
15 MINUS
16 select 'IN T2, NOT T1', column_name,data_type,data_length
17    from user_tab_columns
18   where table_name = 'T1'
19 )
20 /

Filter item limits - search not returning any results with large number of elements otherwise ok

Hi,
We are working through a problem we've encountered with Azure Search. We are building a filter string based on an "id eq 'xxx' or id eq 'ccc' or id eq 'vvv' etc. The id's are provided in a collection and we loop through, building the string until it's
ready to apply.
We are using 2015-02-28 preview at the moment.
We are encountering a situation where, after approximately 20 id's Azure Search doesn't return any results, nor does it appear to return any error code. I'm pretty sure that the url length is less than 8K.
Is there any limit on the number of filter elements in a query?

We followed up offline.
The symptom in this case was a 200 response with no body. The underlying cause is a URL parsing bug that tries to interpret colons in the query string as the delimiter of a URL scheme (like https:), but with a hard length limit of 1KB. We will work
on a fix for both the underlying URL parsing issue and the issue that caused it to surface as a body-less 200.
In the meantime, the workaround is to put colons as close to the beginning of the URL query string as possible. Specifically, putting $filter and facets first, and putting expressions with colons within those first, will mitigate this in most cases.
Note that the .NET SDK puts $filter and facets near the beginning of the query string by default, so if you're consuming Azure Search you might want to give it a try:
http://www.nuget.org/packages/Microsoft.Azure.Search/

Bing based federated result sources not returning any results for non-English languages

I have a result source with this query:
http://www.bing.com/search?q={?searchterms} language:fr site:msdn.microsoft.com&format=rss&count=50&first={startIndex}
This used to give me 40-50 results for common terms like download, blog etc.
From today (7/14) IST, this source does not return any results. There are no results if I execute this query directly in IE either.
Same behavior observed for: language:es, language:de etc.
I do however get results as expected for language:en.
Any idea what the issue might be?

Hi Swapnil,
According to your description, my understanding is that no results returned when searching with non-English in the Result Source query.
I tested the same scenario per your post and I got the same results as you got.
I recommend to change the language:fr in the Result Source query to be lang=fr to see if the issue still occurs.
More references:
http://kbdump.com/sharepoint-2013-opensearch-search-twitter-facebook-wikipedia-page/
http://richardstk.com/2013/11/08/sharepoint-2013-federated-search-to-bing/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Xquery does not return any results on 10.2.0.4, does work on 10.2.0.5

I have a Xquery statement that works as expected on Oracle 10.2.0.5 but does not return any results on Oracle 10.2.0.4.
Is this the result of a badly written query? A bug in 10.2.0.4?
Is there a way to rewrite the query so that is does work on 10.2.0.4?
Testcode:
declare
   l_xml xmltype;
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.*
        from xmltable(xmlnamespaces(default 'http://www.opengis.net/wmts/1.0'
                                   ,'http://www.opengis.net/ows/1.1' as "ows"
                                    ,'http://schemas.opengis.net/gml' as "gml"
                                    ,'http://www.w3.org/1999/xlink' as "xlink"
                                    ,'http://www.w3.org/2001/XMLSchema-instance' as "xsi")
                      ,'for $d in //Layer[TileMatrixSetLink/TileMatrixSet="EPSG:28992"] return $d' passing
                      p_xml columns title varchar2(100) path 'ows:Title'
                      ,format varchar2(100) path 'Format'
                      ,style xmltype path 'Style') as t;
begin
   l_xml := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
<Capabilities xmlns="http://www.opengis.net/wmts/1.0"
xmlns:ows="http://www.opengis.net/ows/1.1"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:gml="http://www.opengis.net/gml" xsi:schemaLocation="http://www.opengis.net/wmts/1.0 http://schemas.opengis.net/wmts/1.0/wmtsGetCapabilities_response.xsd"
version="1.0.0">
<Contents>
<Layer>
    <ows:Title>brtachtergrondkaart</ows:Title>
    <ows:Identifier>brtachtergrondkaart</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>top10nl</ows:Title>
    <ows:Identifier>top10nl</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>bgt</ows:Title>
    <ows:Identifier>bgt</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
</Contents>
</Capabilities>');
   for r_layer in c_layer(l_xml)
   loop
      dbms_output.put_line(r_layer.title);
   end loop;
end;Result on 10.2.0.5:
brtachtergrondkaart
top10nl
bgt

This one's strange indeed.
I can reproduce on 10.2.0.4 and one of the following seems to fix it :
1) Specifying the column list in the SELECT, instead of t.* :
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.title, t.format, t.style
        from xmltable(or,
2) Using an extended FLWOR expression :
for $d in //Layer
where $d/TileMatrixSetLink/TileMatrixSet = "EPSG:28992"
return $dMaybe you've already noticed but the problem only occurs within a PL/SQL context.
The same query run from SQL is OK.

Table-Valued Function not returning any results

ALTER FUNCTION [dbo].[fGetVendorInfo]
@VendorAddr char(30),
@RemitAddr char(100),
@PmntAddr char(100)
RETURNS
@VendorInfo TABLE
vengroup char(25),
vendnum char(9),
remit char(10),
payment char(10)
AS
BEGIN
insert into @VendorInfo (vengroup,vendnum)
select ks183, ks178
from hsi.keysetdata115
where ks184 like ltrim(@VendorAddr) + '%'
update @VendorInfo
set remit = r.remit
from
@VendorInfo ven
INNER JOIN
(Select ksd.ks188 as remit, ksd.ks183 as vengroup, ksd.ks178 as vendnum
from hsi.keysetdata117 ksd
inner join @VendorInfo ven
on ven.vengroup = ksd.ks183 and ven.vendnum = ksd.ks178
where ksd.ks192 like ltrim(@RemitAddr) + '%'
and ks189 = 'R') r
on ven.vengroup = r.vengroup and ven.vendnum = r.vendnum
update @VendorInfo
set payment = p.payment
from
@VendorInfo ven
INNER JOIN
(Select ksd.ks188 as payment, ksd.ks183 as vengroup, ksd.ks178 as vendnum
from hsi.keysetdata117 ksd
inner join @VendorInfo ven
on ven.vengroup = ksd.ks183 and ven.vendnum = ksd.ks178
where ksd.ks192 like ltrim(@PmntAddr) + '%'
and ks189 = 'P') p
on ven.vengroup = p.vengroup and ven.vendnum = p.vendnum
RETURN
END
GO
Hi all,
I'm having an issue where my Table-Valued Function is not returning any results.
When I break it out into a select statement (creating a table, and replacing the passed in parameters with the actual values) it works fine, but with passing in the same exact values (copy and pasted them) it just retuns an empty table.
The odd thing is I could have SWORN this worked on Friday, but not 100% sure.
The attached code is my function.
Here is how I'm calling it:
SELECT * from dbo.fGetVendorInfo('AUDIO DIGEST', '123 SESAME ST', 'TOP OF OAK MOUNTAIN')
I tried removing the "+ '%'" and passing it in, but it doesn't work.
Like I said if I break it out and run it as T-SQL, it works just fine.
Any assistance would be appreciated.

Why did you use a proprietary user function instead of a VIEW? I know the answer is that your mindset does not use sets. You want procedural code. In fact, I see you use an “f-” prefix to mimic the old FORTRAN II convention for in-line functions!
Did you know that the old Sybase UPDATE.. FROM.. syntax does not work? It gives the wrong answers! Google it.
Your data element names make no sense. What is “KSD.ks188”?? Well, it is a “payment_<something>”, “KSD.ks183” is “vendor_group” and “KSD.ks178” is “vendor_nbr” in your magical world where names mean different things from table to table!
An SQL programmer might have a VIEW with the information, something like:
CREATE VIEW Vendor_Addresses
AS
SELECT vendor_group, vendor_nbr, vendor_addr, remit_addr, pmnt_addr
FROM ..
WHERE ..;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

cm:search is not returning any result when logical operator '!' is used.

<cm:search is not returning any result when logical operator '!' is used.
I am using BEA 9.1 content management services API. When I run the following query I am not receiving any results. Also no error or exceptions are seen in the weblogic or cmspi log.
The query is <cm:search id="docs" query="!(object_name like 'Sport*')" />

HI cam
Thanks for your reply, but i found the problem it was because my server administrator password has changed by network guys... and because of it crawler unable to access the content
I wrote my solution here i hope it will help other people
http://bvs-sharepoint.blogspot.com/2015/03/sharepoint-search-is-not-returning.html
RB

IN clause in DB Adapter doesn't retrieve any results

Query builder in the Oracle Database Adapter doesn't give an option to include IN clause in the SQL. If I include that in the SQL directly say like the following
SELECT COL1, COL2 FROM TEMP_TABLE WHERE COL1 IN (# VAR_CD)
and I am passing 'Joe', 'Matt' to the VAR_CD parameter.
This doesn't retrieve any result. If I pass only one value, say, 'Joe' to the parameter VAR_CD, it is fetching the result.
I am not able to figure what goes wrong here.
Can somebody please help me here.

Hi, someone knows what could I do?
After the Lollipop update my Music Index simple vanished. If I enter in the Music app, this only shows the sound effect of the camera.
I tried to clean up and reset the Music app, I have tried to update this too, enters in the safe mode and I used another music app from another company, and every of them only shows this folder.
The strange is that in the File Commander the music is there, and this can categorize the folder with musics.
I don't know what could I do more. If someone have the same problem or know what could I do leave a message.
Thank you

Robohelp 9 WebHelp - Searching doesn't produce any results.

Hi, I upgraded to RoboHelp 9 last week and now searching in Webhelp doesn't produce any results. I've created a new project, used the sample project, tried generating it to a new folder and results remain the same.
When I select the search tab, the status bar flutters with the "Waiting for file...." displayed indefinetly with the occassion display of the javascript: (void);
Screens shots are from the RH 9 sample project. Results are the same with my projects. CHMs generated work fine!
Any suggestions?

Mary
You added the problem to another thread that was not related as the issue there is the use of HTTPS. I have deleted that post.
You also started a second thread with a the same question. I don't understand how asking the question twice will help so I have locked that thread but created a link to this thread so that anyone with an answer can help you. If there is a reason for starting a second thread, please let me know.
Please just ask once and wait for a reply as this wastes moderator's time that is better used trying to answer questions.
Now to the problem. Searching with Chrome installed works just fine for most people so the problem seems to be local to you. If I have read you correctly, after installing Chrome, the search breaks no matter what browser is used.
Was that checked on other machines or just yours?
IGNORE THIS QUESTION - The answer is YES and that was in the post.
Did you also check that search was broken with the supplied sample projects? I know that works with the three browsers being discussed here?
Where was the help installed when tested by you both standalone and from the application?
Questions 2 and 3 are really only related to problems with Chrome. I have not seen anyone report Chrome also breaking the search in the other browsers. There's more to this than meets the eye as Chrome has not caused that problem for anyone else, or at least, no one has reported it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Directory - Org Unit Listing Not Returning Any Results

Hello Everyone,
We are using Nakisa v4.1 on EHP7.0 at the moment. In the user interface, Directory > Org Unit Listing is not returning any results while Employee and Position Listings are working just fine.
What would be the cause ?
Appreciate your help,
Kind regards

Hi,
I am using a live build copied from SAP_Live_RFC.
Below you can find what the cds.log says when I try to search an organizational unit.
2289. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2290. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, deneme]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2291. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=deneme , decoded= deneme
2292. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2293. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2294. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2295. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 32ms
2296. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 86ms
2297. 18 Apr 2014 07:05:22 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
2298. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2299. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, test]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2300. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=test , decoded= test
2301. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2302. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2303. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 28ms
2304. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2305. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 73ms
2306. 18 Apr 2014 07:05:25 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
2307. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: setsearch. For processor OrgChartAppEventProcessor
2308. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Invoking action:setsearch [ORGUNIT_NAME, contains, kalite]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
2309. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=kalite , decoded= kalite
2310. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - ...Request is not required to be verified. For action: updateNotifications. For processor NotificationsProcessor
2311. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - Invoking action:updateNotifications []. For processor NotificationsProcessor. Against controller NotificationsCtr
2312. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - updateNotifications on NotificationsProcessor took: 1ms
2313. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/OC_OU_LISTING took: 43ms
2314. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - setsearch on OrgChartAppEventProcessor took: 94ms
2315. 18 Apr 2014 07:05:28 INFO com.nakisa.Logger - com.nakisa.framework.utility.PostRequestActionRegister.callAction(PostRequestAction) : Calling: PostRequestAction [class=com.nakisa.framework.data.commandProcessor.impl.sap.FunctionRunner, method=releaseAllClients]
Regards.

Replenishment - Msg WT134: Store order processing did not return any result

During the Replenishment run using TCODE: WRP1 following error is being encountered
<b>Msg WT134: Store order processing did not return any result</b>
The error is reported when more than 9 articles are being used.

impelemented the oss note: 979935

Content Query Web Part filter not returning any results

This CQWP stopped working after moving a number of files to new locations. It is configured in the following way:
Source: Show items from the following site and all subsites
List type: Pages Library
We want to filter the list by the article date, last 30 days. Without a filter, results are returned. If ANY filtering is applied, NO results are returned, NO error messages.
I experimented with "Group items by" filter, but it also resulted in no results.
If I change the Source field to a subfolder, I can return filtered results.
Any ideas?

Make sure that ItemStyle.xslt is working fine, try to change the item style
for your content query web part, if it shows data then there your custom defined
item style is not working properly

Select for update that doesn't return any rows

Are there any odd side-effects that may occur if a select for update that returns no results is never committed? I wouldn't think there are, but I'm not sure if there would be some kind of overhead or unforeseen consequences. This isn't a terribly important question, but it's come up in some coding I've done and I've not been able to find any documentation addressing it.

A select for update only locks rows that meet the predicate specified in the where clause. So, if the query returns no rows, no rows are locked.
session1> SELECT * FROM t;
        ID DESCR
         1 Un
         5 One
         2 THIS IS WA
session1> SELECT * FROM t
2 WHERE id = 11 FOR UPDATE;
no rows selectedA second session can update rows in the table
session2> UPDATE t
2 SET descr = 'One'
3 WHERE id = 1;
1 row updated.John
Edited by: John Spencer on Jan 7, 2009 1:36 PM
I just realized that, although you can do updates on the table after the select fo update that returns no rows, you cannot do DDL operations liike a truncate. Unless the session that does the select for update either ends the transaction (i.e. commit or rollback) or ends the session DDL operations will fail.

CONNECT BY query doesn't return any results...

Similar Messages

Maybe you are looking for