Query syntax check

Hello all
I wrote an query and regarding one part, i have syntax problem, when should we seperate different arithmetic operators in a query?
for example
select density_with_desert.popp / density_with_desert.arr - sum(darea) from counytyi don't want to use variables.
thank you im using oracle 11g.
best,david

1003209 wrote:
Hello all
I wrote an query and regarding one part, i have syntax problem, when should we seperate different arithmetic operators in a query?
for example
select density_with_desert.popp / density_with_desert.arr - sum(darea) from counytyi don't want to use variables.
thank you im using oracle 11g.
best,daviduse this:
select sum(density_with_desert.popp) / sum( density_with_desert.arr) - sum(darea) from counyty;
or use this:
select sum(density_with_desert.popp) / sum( density_with_desert.arr) - sum(darea) from counyty group by darea;
Edited by: Gaurav_91 on May 14, 2013 11:53 AM

Similar Messages

Warning in query in Extended Syntax Check

Hi all,
I perform Extended Syntax Check.
It generates following warning for the query: -
In "SELECT SINGLE....", the WHERE condition for the key field "MATNR" does not test for equality. Therefore the single record in question may not be unique.
(You can hide the message using "#EC *)
Please tell me what does it mean. How can I suppress this warning?
Regards,
Saurabh A. Buksh

Hi,
whenu r using select single use a variable or a workarea don't use tables.
select single matnr from mara into v_matnr
where matnr in s_matnr.
also as it is warning message u can neglectit .
when u r using select single u should give entire key information also.
Regards,
Nagaraj
Message was edited by: nagaraj kumar nishtala

Error in Extended syntax check- Select Query

Hi all,
Iam getting this following error in Extended syntax check
" Large table PA0002: No field of a table index in WHERE
condition"
Code :SELECT SINGLE PERNR INTO (G_PERNR) FROM PA0002 WHERE ZZLEGACY_PAYROLL = I_FILETAB-PRNO
AND ZZLEGACY_PAYSYS = I_FILETAB-PRSYS
AND ZZLEGACY_PAYINS = I_FILETAB-PRINS.
can anyone help on this?

Hi,
Change the code like this and check............
For this u need put INSIDE LOOP.
Select single PERNR into G_PERNR from PA0002 where PERNR = I_FILETAB-PRNO and .......... and ......
Check like this...
Thanks.
If this helps you reward with points.
Message was edited by: KDeepak
Message was edited by: KDeepak

Function for syntax check on the repository objects

Hi Experts,
Can anyone help me in finding out the function module used to do syntax check on Repository objects(PRograms/Smartforms/FUnction Modules...etc.,)
Regards
Arif Shaik

>
a.shaik wrote:
> I hope I have sent the query on the ABAP forum itself
You have posted the query on SAP PI/ XI forum....ABAP forum is different: ABAP Development
Regards,
Abhishek.

Syntax check warning

Hi All,
I hav a small query . i m working in upgrade and in slin syntax check warning i m getting warning
i hav a statement like ULINE AT 0(120).
Its giving a warning " Syntax check warning
The static output position "0" must be positive."
Can anyone plzz guide me regarding this,
thanking u all.
regards,
sahakla

Hi..,
in list output..
the list output length will be counted in terms of characters.. the default list length is 132 characters..
maximum no.of characters is 1023..
the count starts from 1.
thats it !!
there is nothing much abt it.
plz do remember to close the thread when ur problem is solved !! reward all helpful answers !!
regards,
sai ramesh

Extended Program Check Warning For Syntax Check

Warning:
Syntax Check Warning
This Warning only Displayed in SLIN
WHERE lgtyp IN S_LGTYP.
Messages :
In "SELECT SINGLE...", the where condition for the key field "LGTYP" does not test for equality .
There fore the single record yuor searching may not be unique.
IF NOT S_LGTYP[] IS INITIAL.
    SELECT SINGLE * FROM T301
     WHERE lgtyp IN S_LGTYP.----
>IT SHOWING THIS LINE
    IF SY-SUBRC NE 0.
      MESSAGE E005(Z01).
    ENDIF.
ENDIF.

Hi Raghu,
When you are using SELECT SINGLE, it is always better to use EQ in the condition than IN.
Instead of using select-options S_LGTYP, declare a parameter: P_LGTYP and if possible re-write the select query as below:
SELECT SINGLE * FROM T301 into lv_variable
WHERE lgtyp EQ P_LGTYP .
Regards
Deepa.

SYNTAX-CHECK

Hi Experts,
How to use SYNTAX-CHECK statement with in the function module?
Thanks,
Vickee.

I have no idea about this.I just want to use SYNTAX-CHECK statement to validate a dynamically generated select query.
Code:
APPEND 'DATA dir TYPE trdir.' TO itab.
APPEND 'SELECT SINGLE *' TO itab.
APPEND 'FROM trdir' TO itab.
APPEND 'INTO dir' TO itab.
APPEND 'WHERE name = sy-repid.' TO itab.
SYNTAX-CHECK FOR itab MESSAGE mess LINE lin WORD wrd.
When I run this ,it through the following error " REPORT/PROGRAM statement missing, or program type is INCLUDE."

Get ALWAYS result of syntax check of sqlplus possible ?

When I pass an sql script to sqlplus as parameter then syntax errors may occur.
It could happen that I type e.g.
SELECT * from mytable
without trailing semicolon.
In this case sqlplus stops processing and waits forever without informing the
user about the problems.
Can I force sqlplus to send syntax check and error results in every case back to the user ?

Until you tell SQL*Plus that you've completed the statement by adding the semicolon, though, it has no idea when to do the syntax check. It has no idea whether you're in the middle of typing in a query that is going to span multiple lines, whether you've stopped typing to talk to someone in the hall, or whether you intended to submit a query but forgot the semicolon.
Realistically, this is just part of debugging a script.
Justin

SQL query - syntax help

Hi All,
I have a table that has 2 columns X, and Y.
create table temp(
x number(5);
y number (5);
);I am trying to write a query to check both columns, here is what I mean.
SELECT CASE
             IF X = 1 AND Y = 0 THEN 3
          IF X = 2 AND Y = 1 THEN 4
          IF X = 4 AND Y IS NULL THEN 5
      END AS STATUS
FROM .....temp ...etc.I know what I want but having problems with the syntax.
Thanks in Advance for your help.
I'm using Oracle 11g, SQL Dev 3.0

select case when x = 1 and y = 0 then 3
            when x = 2 and y = 1 then 4
            when x = 4 and y is null then 5
            else null
        end ans
from ...for more on the case syntax see either one of these links.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/case_statement.htm
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions004.htm

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Ora-01704 string literal too long error on long query syntax

I have a query with more than 4000 characters. I can't seem to get ociparse to accept it. The bind variables are not an issue as I am not concatenating any strings to the query syntax. It is just that my query will all the columns and unions etc exceeds 4000 characters. Any way around this short of hiding it in a view ( which I have already done for other long queries ).
System:
PHP 4.3.10
OCI driver
Oracle 9i Release 2
Thanks,
Bryan

Misread your post, sorry. Oracle limits literal strings to 4,000 chars. According to the documentation it's required that you use bind variables where possible to shorten literal strings below 4,000. You could also try a pl/sql block.
The error you're getting is being returned by Oracle, not PHP. I've seen it pop up on bugtraq a couple of times for PHP, but the answer is always the same. I'm more of a programmer than a database expert, so forgive me for not having a better answer. You may want to try posting this to one of the more specific oracle forums where someone will probably have a better answer for you.
http://www.stanford.edu/dept/itss/docs/oracle/9i/server.920/a96525/toc.htm

Syntax check error in the standard include

Hi,
I have modified one standard include using access key to insert one logic as per businness requirements.Now after inserting that code iam getting syntax error but while activating it is not showing the error and getting activated.
The include is V05XZZMO in that i have inserted code is as follows
FORM MOVE_USERFIELDS USING ZP.
CASE ZP.
    WHEN 'VBRK'.
    header
    MOVE LVBRK-XXXXX TO LFAMTV-ZZXXXXX.
*{   INSERT         GDVK934083                                        1
          MOVE LVBRK-ZUONR TO LFAMTV-ZZZUONR.
*}   INSERT
    WHEN 'VBRP'.
    item
    MOVE LVBRP-XXXXX TO LFAMTV-ZZXXXXX.
*{   INSERT         GDVK934083                                        2
   MOVE LVBRP-MATWA TO LFAMTV-ZZMATWA.
*}   INSERT
ENDCASE.
ENDFORM.
now it is throwing error saying that LFAMTV doesn't exist...when I double click on that it is taking me to the FM RV_INVOICE_VIEW_2 where it is defined....
Can anyone know the reason why it is throwing the error when we go for the syntax check but when u activate the program it is getting activated.. so can this error can be neglected?
Any help on this will be appreciated..
Regards,
Rohan.

Hi,
First comment ur code and then activate the include.
Now put a break point in the form and then in the debug mode check the structre LFAMTV is visible or not.
if yes then once again add ur code and then activate the whole program.
and now once again debug it and see...., whether the values are updated to the strurure LFAMTV.
Regards,
Nagaraj

SQL Developer 1.1.0.21: Issues with Data Grid and SQL syntax checking

In this new release of SQL Dev, when I execute a SQL in the SQL Worksheet and click in the Data Grid in the Results tab and try to navigate within a record using arrow keys, the grid cell enters into edit mode by default and so I cannot use the Left or Right arrow keys to navigate the grid. I am forced to use tab key to navigate. This is counter intuitive in my opinion.
Is there any option to change this behavior?
Another issue that I have come across is with SQL syntax checking. In some cases, when I press F9 to execute a SQL, it shows the SQL as executed i.e. shows something like 0.0134 seconds in the toolbar and no results displayed. In reality, the SQL had some syntax error which were NOT reported. This can be frustrating since now I have to fall back to SQL*Plus or TOAD just for syntax check.
I like the fact that SQLDev highlights the current SQL but it would be more useful if it just indicated the first line of the current sql instead of highlighting the whole sql.
Manish

"In this new release of SQL Dev, when I execute a SQL in the SQL Worksheet and click in the Data Grid in the Results tab and try to navigate within a record using arrow keys, the grid cell enters into edit mode by default and so I cannot use the Left or Right arrow keys to navigate the grid. I am forced to use tab key to navigate. This is counter intuitive in my opinion."
In the "Results" tab, Click Ctrl & Tab keys (at the same time) or with mouse click on any cell other than the first column (a sequence or rownum), you will be able to navigate using the arrow keys.
"Another issue that I have come across is with SQL syntax checking. In some cases, when I press F9 to execute a SQL, it shows the SQL as executed i.e. shows something like 0.0134 seconds in the toolbar and no results displayed. In reality, the SQL had some syntax error which were NOT reported. This can be frustrating since now I have to fall back to SQL*Plus or TOAD just for syntax check."
The 0.0134 seconds could be the result of the most recently executed successful statement. Check the Script Output tab for errors. Use F5 (Run Script option) instead of F9.
"I like the fact that SQLDev highlights the current SQL but it would be more useful if it just indicated the first line of the current sql instead of highlighting the whole sql."
On the SQL statement (or code), Right Click -> Format SQL (or press Ctrl & B), proper formatting would help.
I use version 1.0.0.15.57 and seems to be working allright.
- Babu Rangasamy

Getting Error 26 in ALE IDOC scenario .- EDI Syntax Check Error...

Hi..
i am working in ALE Idoc scenario...I am getting Status 3 as well as status 26 in we02 transaction in my custom IDOC scenario for outbound process..
The error is 'EDI- SYntax Check'..
How to remove this error..
Pls help.

ya, there is only one segment available in IDOC..named i.e zseg_a .
So , error in postion is avoided..
How to find syntax error then?

Syntax check for tables and function modules

Hi,
I am writing a program that perform syntax check on object such as executable programs , function modules and tables.
Syntax check works fine for programs, but not for tables.
How can I perform syntax check on my tables or structures?
I get my data from the table TADIR. But I don't get my function modules from there. What is the table for this.
Thanks 4 ur replies.
Parvez

hi
good
generally in sap while creating a table or structure we get the error and we solved them,but like reports during runtime it is not possible to check the syntax of a table or structure.
thanks
mrutyun^

Query syntax check

Similar Messages

Maybe you are looking for