Query to find the the sql statements

Hi,
Oracle Version: 10.2.0.3
Can any one please help me how to find which sql statements generate the error "OPEN CURSORS EXCEED ".
Thanks & Regards,
Poorna Prasad.S

1) export the table, drop the table, create the table definition in the new
tablespace, and then import the data (imp ignore=y).
2) Create a new table in the new tablespace with the "CREATE TABLE x AS
SELECT * from y" command:
CREATE TABLE temp_name TABLESPACE new_tablespace AS SELECT * FROM real_table;
Then drop the original table and rename the temporary table as the original:
DROP TABLE real_table;
RENAME temp_name TO real_table;
3) Use the one mentioned in previous reply.
After #1 or #2 is done, be sure to recompile any procedures that may have been
invalidated by dropping the table.

Similar Messages

  • How could I find the SQL statement who get this message ?

    ORA-01555 caused by SQL statement below (Query Duration=11191 sec, SCN: 0x0854.723b9c32)
    ... How could I find the SQL statement who got this message ?
    Thanks, Paul

    ORA-01555 means that the UNDO/ROLLBACK space is not large enough.
    This occurs because the SELECT statement is attempting to read the UNDO, but the UNDO has been released (transactions have committed or rolled back) and reused.
    The following are SOME of the reasons I have seen this to occur:
    1) Updates in a loop, with commits happening in the same loop
    - this will mark the UNDO available quickly and quickly reuse it. Then when the SELECT wants to rebuild a block, the UNDO used to rebuild the block has been reused (solution, make the UNDO bigger)
    2) A SELECT cursor used to control a loop in which updates are performed, and a 'done' flag is marked against the current cursor record, and commits are performed at the end of each loop, prior to fetching the next record
    - same problem as above, but it hits the current process. Same solution
    3) A 'month end' activity spike occurs, and all sorts of transactions create updates. There is a report that reports the activity - amusingly it needs to start at the beginning of all the work and updates periodically by doing a huge SELECT up front. This is then used to drive a loop which attempts to get information from the various transactions that have been updated and committed. After a while, the SELECT gets an ORA-01555
    - same problem as above and same solution. Get a bigger UNDO segment.
    You say this only happens once a month. That should give a hint.
    I wouldn't bother with which SELECT statement, as much as which APPLICATIONs are being run when it happens.
    One way around this - use 10g and set the guaranteed retention period. All sorts of other things will break, by no more 1555. <g>

  • How to view the SQL statement generated during execution of the BW Query?

    Dear Experts,
    I am trying to retrieve data in a SAP BW Query from a Non-SAP system.
    I think if I am able to see the complete SQL statement that was generated when I executed the BW Query, I may be able to use it to retrieve the data.
    Do you know how and where I can see the SQL statement of a BW Query's SQL statement?
    I tried RSRT options to execute the Query but still could not find the SQL statement.
    Thanks in advance.
    Regards,
    Shunhui.

    hi
    goto rsrt
    give your query name
    select execute + debug option
    in the debug option under data manager check the check box "display SQL/BIA query
    selcet continue
    you can see the sql statement
    thanq

  • Query to find the Views and synonyms that are accessing through db_link

    HI all,
    Oracle 10g
    I need a Query to find the Views and synonyms that are accessing through db_link.
    ie.
    database A have the db_link to database B through a schema A
    now i need to find what are the Synonyms and views that are accessing through db_link either directly or indirectly..
    regards,
    Deepak
    Edited by: Deepak_DBA on Dec 10, 2010 5:38 PM

    On the second database (B) use this query to find the SQL which used by the schema A (DB LINK USER). Check the SQL_FULLTEXT column.
    select sql_fulltext,sql_id,module,parsing_schema_name,parsing_user_id,first_load_time,loads,users_executing,rows_processed,plsql_exec_time,sorts,fetches,invalidations,parse_calls,cpu_time,elapsed_time,disk_reads,buffer_gets
    from V$sqlarea
    where parsing_schema_name = 'A' --and to_char(first_load_time,'dd/mm/yyyy') like  '%11/08/2007'
    order by first_load_time desc;
    Regards
    Asif Kabir

  • How to write the sql statement of my finder function in cmp?

    hi,
    I create a cmp ejb from table INFOCOLUMN,and I create a my finder function ,which sql statement is :
    select * from INFOCOLUMN WHERE employee_id=id
    employee_id is a column of the table,and id is the finder function parameter.
    The error is : invalid column name
    So,how to write the sql statement.
    Thanks .

    Mole-
    Bind variables are of the form $1, $2, etc., so your query stmt should look like:
    select * from INFOCOLUMN WHERE employee_id=$1
    -Jon

  • Error when generating the SQL statement while running the Query

    Hello SDN Mates,
    Am using three cubes in one infoset and build a query on that. Intially it was running fine, but now am getting error generating the SQL statement. Can you please throw some light on this. Your idea would be highly appreciated.
    Thanks and Regards
    Arun S

    Hi Arun
    is there any change in the objects (Check also the consistency of infoobject ) included in infoset, just make sure those are active, open the query in designer and check if no error/warning message are present
    Thanks
    Tripple k

  • Query to find the memory of database in oracle,sql

    Hi All,
    Please let me know the query to find the memory of database in oracle,sql.
    Thanks,
    sajith

    How do I find the overall database size?
    The biggest portion of a database's size comes from the datafiles. To find out how many megabytes are allocated to ALL datafiles:
    select sum(bytes)/1024/1024 "Meg" from dba_data_files;
    To get the size of all TEMP files:
    select nvl(sum(bytes),0)/1024/1024 "Meg" from dba_temp_files;
    To get the size of the on-line redo-logs:
    select sum(bytes)/1024/1024 "Meg" from sys.v_$log;
    Putting it all together into a single query:
    select a.data_size+b.temp_size+c.redo_size "total_size"
    from ( select sum(bytes) data_size
    from dba_data_files ) a,
    ( select nvl(sum(bytes),0) temp_size
    from dba_temp_files ) b,
    ( select sum(bytes) redo_size
    from sys.v_$log ) c;
    Another query ("Free space" reports data files free space):
    col "Database Size" format a20
    col "Free space" format a20
    select round(sum(used.bytes) / 1024 / 1024 ) || ' MB' "Database Size"
    , round(free.p / 1024 / 1024) || ' MB' "Free space"
    from (select bytes from v$datafile
    union all
    select bytes from v$tempfile
    union all
    select bytes from v$log) used
    , (select sum(bytes) as p from dba_free_space) free
    group by free.p
    This is what I use :P From http://www.orafaq.com/wiki/Oracle_database_FAQ#How_do_I_find_the_overall_database_size.3F

  • Sql query to find the balances for a customer account wise.

    Hi,
    Could someone help me with the sql query to find the balances for each customer account wise. This is need to generate the report.
    presently we are using this query, but the output doesnot return the expected result.
    SELECT sum(nvl(ps.acctd_amount_due_remaining,0)) "Balance"
    FROM      ra_cust_trx_line_gl_dist_all gld,
              gl_code_combinations c,
              ar_payment_schedules_all ps,
              RA_CUSTOMER_TRX_ALL rat,
              ra_customers rc
    WHERE      c.CHART_OF_ACCOUNTS_ID = 101
    and gld.code_combination_id = c.code_combination_id
         and rat.CUSTOMER_TRX_ID=gld.CUSTOMER_TRX_ID
         and rat.CUSTOMER_TRX_ID=ps.CUSTOMER_TRX_ID
    and ps.customer_id=rc.customer_id
         and ps.status='OP'
         and ps.gl_date <= :PDATE
         and ps.org_id=:PORGID
         and ps.class in ('GUAR','INV','DM','DEP')
    and c.SEGMENT4=:Account_id
    and ps.customer_id=:Customer_id
    Thanks in advance.
    Kalyan.

    Can someone help us with this.

  • Can anybody provide the SQL query to find the files uploaded in a particular folder?

    Hi All,
    Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
    GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
    Any help is greatly appreciated.
    With best regards,
    Nevin

    Nevin,
    Be great if we could know the version of Portal. For Rel. 1, here's the query
    select id,masterthingid from wwv_things
    where siteid = &site
    and cornerid = &corner
    &site - Content Area id
    &corner - Folder id
    if you don't know the folder id, use
    select id from wwv_corners where siteid = &site
    and name = &folder
    Hope this helps. I have run into this situation before. Usually, the culprits were
    one of the following:
    1. Junk Characters in description of item (caused due to Copy-Paste)
    2. Special Characters in the File name
    Hi All,
    Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
    GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
    Any help is greatly appreciated.
    With best regards,
    Nevin

  • SQL Query to find the Notify upon Completion employees

    Hi,
    I am looking for a query to find the names of the employees/users who are notified upon the completion of the Concurrent Programs. I know how to find the concurrent program details but not able to find notify upon completion employees details. Please help me.
    Thanks,
    KM

    Thanks Scott for responding. There is no any custom code. Here is the navigation to reach there:
    System Administrator -> Requests -> View -> Specific Requests -> Open any request ->View Details -> Options -> Notify the following people
    I am looking for the query to find these notified people using SQL Query.Query FND_CONCURRENT_REQUESTS table (NOTIFY_ON_PP_ERROR column) -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_REQUESTS&c_owner=APPLSYS&c_type=TABLE
    Thanks,
    Hussein

  • Query to find the user is having access to sql server DB

    Hi,
    Please help me in this.
    Query to find the whether the user is having access to sql server DB.
    Cheers,
    sajith

    TUBBY_ORCL?Select 1 from dual where 'ORACLE' = 'SQL SERVER';
    no rows selected
    Elapsed: 00:00:00.01

  • The SQL statement is not valid - when importing data from SQL Server using a query

    Hi there,
    I am trying to import data from SQL to Power Pivot using a SQL query like below:
    SELECT Score.FieldCount, Score.Record.GetAt(0), Score.Record.GetAt(1),  Score.Record.GetAt(2),  Score.Record.GetAt(3),  Score.Record.GetAt(4)
    FROM 
    SELECT * FROM dbo.CLR1(
    dbo.CLR2('c:\FILES\Test.xml'), 
    'SELECT * FROM [dbo].[CXCustomer_Small]') Input
    ) Score
    And when I tried to validate it, it returns
    The SQL statement is not valid. A column name cannot be blank.
    I ran the above SQL statement in Management Studio and it works without problem. Any idea?
    Thanks!
    Chu
    -- Predict everything. http://www.predixionsoftware.com

    Never mind, I figured out - I need to give each column a name.
    -- Predict everything. http://www.predixionsoftware.com

  • Find all the sql statements that are executed in a database

    Hi
    I would like to get all the sql statements that have been executed till now on the database. Also, i need the session and user details who has executed the statement.
    I know this can be done after enabling auditing.
    I would like to get the details without enabling the auditing option.
    I am using oracle 9i and oracle 10g.
    Regards,
    Vamsi

    You can use {noformat}{noformat} tags to preserve the SQL format. Below is an example of how to use it.
    <place your code here>\When your do that your code may look like this.select
         substr(sid || ',' || serial#,0,15) sid,
         USERNAME,
         PROGRAM,
         MACHINE,
         OSUSER,
         TERMINAL,
         sql_text Query
    from
         v$sqltext,
         v$session
    where
         address=sql_address
         and hash_value=sql_hash_value
         and status='ACTIVE'
    order by LOGON_TIME,sid,piece
    This one is more readable to everyone.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Sql query to find the space in between the sentense

    hi,
    can anybody tell me the query to find the space in between the data
    chandan

    Not sure what you mean, but you might want to take a look at INSTR, like in
    instr (txt, ' ')

  • Executing the SQL statement is not allowed - Error

    I am getting "Executing the SQL statement is not allowed" for an INSERT cfquery that I'm running.  I checked the usual suspects:
    - DSN allows INSERT
    - I've seen reports online where certain field names or values are considered key words, so for protection CF blocks the query in this way (it would be nice if there was a different error message when it gets blocked this way vs. the DSN doesn't allow INSERT error message).  The field names and values were all benign strings, so it didn't seem like that.
    I took the same string for the query and ran it on another page and it ran fine (same DSN, too).

    SOLVED: I decided to enter this in here, just to get it into web searches for others since I couldn't find anything.
    - I was calling a function for one of the values in the query:  get_db_status_code("initialize")  Apparently CF parses the query to see if it's allowed BEFORE it runs the CFML in it, so something in that function name, or the parameter "initialize" was a key word that CF doesn't allow.  I moved the function call outside of the query and loaded a temp variable for use in the query and it then worked.

  • OpenSQLException - The SQL statement "INSERT INTO "KMC_SUB_RCPT"...

    Hallo,
    We have the problem that subscriptions cannot be sent. In defaultTrace I have found following entry:
    #1.5 #32B150008004002400001641000710B80004539FE52B4274#1217846116565#com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionsOpenSQL#sap.com/irj#com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionsOpenSQL#LI01736#118449##iscp63.isc.aok.de_LFP_399377450#LI01736#03186780621111ddb4c432b150008004#SAPEngine_Application_Thread[impl:3]_10##0#0#Fatal##Plain###Cannot unsubscribe user. Context: ResourceContext: user=LI01736, creationTime=1217846116420, locale=de. User: LI01736. ID: 50cdd784-51ac-2810-2393-ea9709f50de3. Recipient: com.sapportals.wcm.util.channels.wcm.Recipient@ce9b7f70. Step: Executing SQL INSERT. . Trying to rollback transaction.#
    #1.5 #32B150008004002400001643000710B80004539FE52B989A#1217846116586#com.sap.sql.jdbc.common.StatementAnalyzerImpl#sap.com/irj#com.sap.sql.jdbc.common.StatementAnalyzerImpl#LI01736#118449##iscp63.isc.aok.de_LFP_399377450#LI01736#03186780621111ddb4c432b150008004#SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#/System/Database/sql/jdbc/common#Java#com.sap.sql_0019##Exception of type com.sap.sql.log.OpenSQLException caught: The SQL statement "INSERT INTO "KMC_SUB_RCPT" ("ID","RECIPIENT","RCPTTYPE","UNSUBSCRIBED") VALUES ('50cdd784-51ac-2810-2393-ea9709f50de3','LI01736','0','X')" contains the semantics error[s]: - 1:27 - the column >>ID<< is undefined in the current scope
    [EXCEPTION]
    #3#com.sap.sql.log.OpenSQLException#The SQL statement "INSERT INTO "KMC_SUB_RCPT" ("ID","RECIPIENT","RCPTTYPE","UNSUBSCRIBED") VALUES ('50cdd784-51ac-2810-2393-ea9709f50de3','LI01736','0','X')" contains the semantics error[s]: - 1:27 - the column >>ID<< is undefined in the current scope
    #com.sap.sql.log.OpenSQLException: The SQL statement "INSERT INTO "KMC_SUB_RCPT" ("ID","RECIPIENT","RCPTTYPE","UNSUBSCRIBED") VALUES ('50cdd784-51ac-2810-2393-ea9709f50de3','LI01736','0','X')" contains the semantics error[s]: - 1:27 - the column >>ID<< is undefined in the current scope
         at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:38)
         at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:101)
         at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:87)
         at com.sap.sql.jdbc.common.CommonStatementImpl.executeUpdate(CommonStatementImpl.java:159)
         at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeUpdate(StatementWrapper.java:162)
         at com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionsOpenSQL$SqlCommand.executeUpdate(SubscriptionsOpenSQL.java:3834)
         at com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionsOpenSQL.unsubscribe(SubscriptionsOpenSQL.java:2127)
         at com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionManager.unsubscribe(SubscriptionManager.java:3226)
         at com.sapportals.wcm.repository.service.subscription.wcm.SubscriptionManager.unsubscribe(SubscriptionManager.java:3205)
         at com.sapportals.wcm.repository.service.subscription.wcm.ActionInboxItemProducer.executeItemAction(ActionInboxItemProducer.java:222)
         at com.sapportals.wcm.service.actioninbox.wcm.ActionInboxService.executeItemAction(ActionInboxService.java:610)
         at com.sapportals.wcm.service.actioninbox.wcm.ActionInboxService.executeItemActions(ActionInboxService.java:1221)
         at com.sapportals.wcm.control.actioninbox.ActionInboxDetailsControl.onClick(ActionInboxDetailsControl.java:396)
    Any Idea?
    Regards,
    Gerhard

    Statement statement = connection.createStatement();
    //createing a statement object
    String query= "INSERT INTO table......"
    output.append("\nSending query:" + connection.nativeSQL(query));
    int result = statement.executeUpdate(query);//updates database wit record
    if (result==1)
    output.append("\ninsertation successfull");
    JOptionPane.showMessageDialog(null,"Insertation successfull ",
    JOptionPane.INFORMATION_MESSAGE);
    else
    output.append("\ninsertation unsuccessfull");
    JOptionPane.showMessageDialog(null,"Insertation unsuccessfull",
    JOptionPane.WARNING_MESSAGE);
    statement.close();
    have left out the trys and catches and some other bits and pieces that i dont think ud need its the bare bones but it might help or at least give u an idea. have used this code before to do something similar.

Maybe you are looking for