'Query was changed' message

Hi,
I am using a query in my Web template as a Dataprovider. I changed this query and the web template started popping up this message in the warning.
I tried to put in a insignificant change in the web template and save it again so that the timestamp would change.
The message still pops up...
Is there anyways to remove this message? I cannot have the 'suppress warnings' checkbox ticked, since it is being used to return messages to the users.

Hey... Thanks Arun & Amol...
I had regenerated the query and checked the timestamps in the table as well.. What I had missed was pretty basic, the dataprovider was based on a query view, which needed to be regenerated...
Did that and that resolved the issue...
- Adi

Similar Messages

Query was changed! Requirement no longer available

hi frinds
   when i use 'SET_CONDITION' command i get 'Query was changed! Requirement no longer available' this type of waring . and i am not geting any result.
   so pls help me.
   thank's in adv.

Hi,
BizarreQuery Warning!
Check this thread to get the exact answer and cause of your issue.The issue is because you have changed the query and your workbook was saved befor you had changed your query.
-Mayuri

In WAD getting warning messages "Query was changed"

Hi All,
After I changed my query in WAD, Iam getting the warning messages in top of the page in web (used WAD)for all charcaterstics and keyfigures .
Can anyone please suggest how can I avoid these warning messages?
Thanks in advance,
regards,
Govind

Govinda:
In WAD, Open your template. In your template properties(Not web item properties, dont select any web item, just the template) There are 2 check boxes to suppress system messages and system warning. Save and execute, you should be okay.

HT1311 I have been using my apple TV successfully for 1 year. Today there was a message telling me I cannot sign in because the terms and conditions have changed. Please go to apple support for more info. However, I cannot find any info. What do I do

I have been using my apple TV successfully for 1 year. Today there was a message telling me I cannot sign in because the terms and conditions have changed. Please go to apple support for more info. However, I cannot find any info. What do I do next.

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I downloaded Firefox but can't open it. I keep getting "The connection to the server was reset while the page was loading" message. If it's a firewall issue, how do I change my firewall to accept Firefox?

I have used Firefox for a number of years but some time ago I got a virus on my computer. I loaded eset nod32, removed the virus and cleaned the old files etc. using ccleaner.com. Now I keep getting the "The connection to the server was reset while the page was loading" message and I haven't been able to use firefox since then. I have uninstalled and re-installed it several times with no avail. I suspect there is something in my windows frrewall stopping it.

If you want to check the Firewall, follow this-
1. Click Start Menu > Control Panel > Security Center.
2. Under the "Manage security settings for" click Windows Firewall.
3. On the Exceptions tab, do one of the following-
1. If Mozilla Firefox Firefox is there in the list, make sure it's checked.
2. If Mozilla Firefox is not there, close the Windows Firewall window.

I had my settings on Pacific time and should have been Central time. Now I've lost a lot of my yellow messages when it was changed to Central. I'm trying to go back in and retrieve it

I had my settings on Pacific time and should have been Central time. Now I've lost a lot of my yellow notes when it was changed to Central. I'm trying to go back in and retrieve the notes to no avail and have tried changing the settings on my Iphone 4. No luck there either....

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

"The query was cancelled" error after upgrade from 10.1.3.3.3 to 10.1.3.4.2

Hi,
I was using OBIEE 10.1.3.3.3 /. After upgrading to 10.1.3.4.2 , the queries are not running ( long running queries alone) as expected. and so all the campaigns iwh tlong running queries are cancelled and the error message is seen in the xml log in Marketing jobs management.
We have upgraded the OBIEE version from 10.1.3.3.3 to 10.1.3.4.2 yesterday after which the connectivites have been checked with SQLPLUS and they are working fine. But when the campaign has been loaded, the Analytics have received the request for the segment query and after longer run, the task has been cancelled with the error message "The Query was cancelled as mentioned below in the Job Stats
<jobStats>
<jobID>2</jobID>
<jobType>WriteListFiles</jobType>
<jobUser>userid</jobUser>
<jobState>Error</jobState>
<jobTotalMilliSec>1h 41m 21s 160ms</jobTotalMilliSec>
<jobStartedTime>2012-03-22T08:06:13Z</jobStartedTime>
<jobFinishedTime>2012-03-22T09:47:34Z</jobFinishedTime>
<jobIsCancelling>N</jobIsCancelling>
- <exception>
<message>Job request of type "WriteListFiles" failed.</message>
- <exception>
<message>Error executing the list generation SQL.</message>
- <exception>
<message>Error in executing cursor for WorkNode (Id:0)</message>
- <exception>
<message>The query was cancelled.</message>
</exception>
</exception>
</exception>
</exception>
</jobStats>
Please let us know the suggestions
So far, the unaccessedtimingrunoutminutes tag has been tried to set 50 under ODBC tag in instanceconfig.xml. and the defaulttimeoutminutes has been tried to set to 150 in the same instanceconfig.xml.
along with that the rpd changes are done. For all the users apart from the Administrator, the timeout has been changedfrom 10 minutes to 150 minutes. But still that way is not working.
The segments was fired with the Administrator login. So , if the timeout for admin login can be set, i assume that the problem might be solved. Please let us know ur suggestions here too.
If that is the case, when we open rpd , only for Administrator user and group, the Permissions button is disabled. So i want to know how to change for Admin user settings in rpd..
Please advice us on the same.
Regards,
Madasamy M.
Edited by: Madasamy Murugaboobathi on Mar 26, 2012 1:40 PM

The issue has been resolved by setting the following parameters
<UnaccessedRunningTimeoutMinutes>120</UnaccessedRunningTimeoutMinutes>
<DefaultTimeoutMinutes>120</DefaultTimeoutMinutes>
<ClientSessionExpireMinutes>120</ClientSessionExpireMinutes>
<ConnectionExpireMinutes>120</ConnectionExpireMinutes>
<UIDefaultTimeoutMinutes>1440</UIDefaultTimeoutMinutes>

Warning Query was cahnged ! Characteristic no longer exist' in workbook

Hi all
I am getting one warning ' Query was cahnged ! Characteristic no longer exist' while opening the work book
I have though cahnaged the query but every time I am getting this warning. Is there any way out to get ridof this warning message
Thanks
Sunny

Hi,
BizarreQuery Warning!
Check this thread to get the exact answer and cause of your issue.The issue is because you have changed the query and your workbook was saved befor you had changed your query.
-Mayuri

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

My ID was changed fraudulently and I want to change it back.

My apple id was changed fraudulently and I got the email stating:
Hello,
The following information for your Apple ID XXXX was updated on 22/03/2013:
Apple ID
Email address(es)
If these changes were made in error, or if you believe an unauthorised person accessed your account, please reset your account password immediately by going to iforgot.apple.com.
To review and update your security settings, sign in to appleid.apple.com.
This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
Thanks,
Apple Customer Support
When I go through this process, it only lets me change emails, passwords etc but not the actual id. I want the actual id back as I am unable to update apps etc without the original id. I've gone through all sign out, sign in processes, but since the apps were purchased with the original id it will only update them with that login.
Can anyone help me on how to change the actual ID back please?

I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt!

Email address was changed now iMessage won't work

my email address was changed from mine to my dads. he had changed my apple ID over to his email (i allowed him to use my ipad and this is what happened). i just changed my password and email back to mine and now my iMessage will not work. it keeps saying that my messages will not go through. i turned my imessage off and then back on and it is still not working!

DId anyone figure this out, it just happened to me about 5 hours ago.
I can now send from my macbook but still not my phone.
UGH! So aggrevating!

The disk copy of "File_Name" was changed since you last opened or saved it. Do you want to save anyway?

When saving a Photoshop CS6 file I am suddenly getting this message: "The disk copy of “File Name” was changed since you last opened or saved it. Do you want to save anyway?" I am not connected to a network and I had not downloaded any new software when it started. How do I fix this? and will this cause any file corruption? -Thanks

Chris, thanks. Yes, I realize that something outside of Photoshop is modifying the file but how do I find out what is causing it or how do I stop it? I had not added any new software or upgraded anything when this started and I have never had this problem before. I don't use any font managers. I do have a virus barrier but, as I've said, I have had this software for awhile and can't imagine why all of a sudden it would be interfering with my file. I spoke with Apple to see if the problem might be on their side but they seem to think my Mac is running fine. My biggest concern is will this cause my file to become corrupt? Before closing out yesterday, I created a new document and copied everything from this file over into the new document and renamed it in the hopes that it may help... Maybe something was wrong with that original document. Not sure that will work but will find out today. Also, I haven't worked on any other files since this started. So, I'm not sure yet if this is happening to this file only or if it may happen to future files. -Thanks

Customized Report to to query the changes happened to a device in a particular period in SCCM 2012

Dear All,
Need some help on SCCM. I am looking for a report in SCCM which will tell me the changes happened to a device (drivers deleted, software installed / registry changes). Any information which can help us identify changes on a computer in
a given period.
Please help me to get a query on this.
Regards
Suraj

Since CM12 does not record details from every registry key, there is no way to do this. And for that matter it would be virtually impossible to do.
What exactly are you trying to do? Why do you care if a rev key was changed? Etc.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

'Query was changed' message

Similar Messages

Maybe you are looking for