Question about carDemo - wrong URL shown

Made carDemo running on my machine successfully. Kool stuff!
Found something wrong, the question may seem silly.
The URL shown on my brower is always the previous page:
e.g. http://localhost:8080/jsf-cardemo/chooseLocale.jsf -- for the store front page
http://localhost:8080/jsf-cardemo/storeFront.jsf -- for the carDetails page
It can be quite dangeous if I do a page refresh. Is there anything wrong?

Thanks!
Such a trivial problem. Why the example is released with this problem? It really confuses the user, not mention it will cause problem with refesh.
Will try the prefix mapping (/faces/), hopefully, it will solve the problem.

Similar Messages

  • Why can't my ipod touch 4 play videos that i purchased?Something about a wrong URL. Help me!

    Something about a URL.... Any advice? No restarting, please!

    Have you  went to Settings>Safari and delete cookies, history and cache?
    Have you tried restoring to factory defaults/new iPod if you only restored from backup before?
    Have you tried conncting to another network?
    Have yu tied changing the DNS server to Google/\'d 8.8.8.8 is Settings>wifi

  • Question about Publishing Application URL

    Hi All,
    I've done a bit of digging, and think this is probably not possible using an APEX application hosted by oracle on apex.oracle.com, but I wanted to post here and check just in case I was wrong.
    I've installed the packaged APEX 'discussion forum' application into a workspace set up for me on apex.oracle.com.
    Reading through the user guide on publishing the app url, they say to give http://apex.oracle.com/pls/otn/f?p=<app#>:<page#> to the users.
    This is fine, but as this is for a small forum, I was wondering if there is any way to get a nicer url, even if just something like http://apex.oracle.com/pls/otn/my_unique_forum_name.
    I've seen that if I was hosting myself I could use apache to rewrite my preferred url to match the required app#:page# format, but is something like this possible for an app hosted on apex.oracle.com?
    If anyone knows if this is possible/impossible - let me know.
    Thanks,
    Tony

    Hi Chris,
    Getting some compilation errors here. Can you explain to me you the compiler will understand f?p=102:1;
    Here is my procedure:
    create or replace procedure "FORUM"
    is
    begin
    f?p=12345:4;
    end;
    And the compiler errors with the following:
    Compilation failed,line 4 (13:45:14)
    PLS-00049: bad bind variable '4'Compilation failed,line 4 (13:45:14)
    PLS-00103: Encountered the symbol "?" when expecting one of the following: := . ( @ % ;
    Do I need to escape the colon somehow to avoid interpretation as a bind variable?
    Thanks for the clarification, and sorry if this should have been obvious ;)
    Tony

  • Omniportlet  question - about assigning an url to a column

    Hi,
    i have created an omniportlet and assigned an url to one of its columns which passes parameters etc.
    the problem is, this must be just an information kind simple pop-up window but i cant resize or modify the window through onclick
    is there a way to modify the opened new windows size , appereance etc. on omniportlet?
    Regards

    Hi all,
    i have found it on metalink
    just writing
    javascript:window.open('URL YOU WANT','Popup','width=400,height=200'); javascript:location.reload();
    to Url field, works!!
    cheers,

  • Question about mangled URLs

    Hello,
    I have a load testing app that I'm adapting to work with BSPs and I have a question about the mangled URLs that are used.
    If I record a URL that is mangled, can I save that URL and reuse it during the playback of a session?  From what I understand it includes things like theme, language and such.  But obviously if it includes a session  ID, it won't work.
    Session ID seems to be stored in a cookie.  Can it also be stored in a mangled URL and if so, why the duplication?
    Any help greatly appreciated!
    Thanks!!!

    Those parameters are there for a reason; to pass along information to the page so that the dynamic content can be manipulated based on them. So your question really is: "Can I pass along this information to the page in another way than URL parameters?"
    There are always options, but most of them require work. For example:
    1) use a POST to generate the page
    In a POST request the parameters are part of the request body, so you don't see them. The trouble is that a POST request cannot be created just like that; it requires some sort of form submission behind it. This can be facilitated with javascript (output a form and let the link submit it through an onclick handler), but it is far from a clean solution.
    Added pain: form submits behave badly in combination with the browser back/forward buttons. Also, bookmarking cannot work like this.
    2) "web 2.0". Using Ajax it is possible to do page updates in the background, so you could do the request (with parameters) asynchronously and update the page accordingly.
    Added pain: again back/forward buttons and bookmarking will be broken unless you take very specific steps (that I don't know of myself).
    3) conversation scope technology. Some APIs provide a so called "conversation" scope, which allows you to hold on to certain values across requests until you end the conversation. You could use this to push certain values into the conversation and reuse them in different pages without having to pass along the values as request parameters or in a form. Even without a conversation scope, you could simply abuse the session for this purpose.
    I hope this has given you some idea how to go about implementing your requirement.

  • Question about iCloud. How do I change my e-mail address, I have the wrong one and want to change it.

    question about iCloud.  How do I change my e-mail address, I got the wrong address.

    There are a variety of options available to you, including creating an email "alias" or changing the email address associated with your iCloud ID.
    For all practical purposes your iCloud email address and Apple ID are interchangeable. To change your Apple ID read Apple ID: Changing your Apple ID.
    If you simply created an Apple ID in error, you might consider abandoning it altogether and creating a new one. On the other hand, if you already used that Apple ID to purchase iTunes or other digital content, don't create a new Apple ID, because any purchases you already made are inexorably linked to the Apple ID used to make them.

  • Question about app itune, it automatically charge money from my card on Apr/24th, but i have not buy any music or any apps on that day!! what's wrong

    question about app itune, it automatically charge money from my card on Apr/24th, but i have not buy any music or any apps on that day!! what's wrong ??

    Please look at your E-Bill and click report a problem.

  • Question about (HttpURLConnection)url.openConnection();

    Greetings Java Experts.
    I have a question about the following code snippet.
    As you can see below this snippet will establish a connection.
    Question how long will it allow for the connection to be established - for example if the web traffic is taking an unusually long period of time can I set it to a higher value ?
    connection = (HttpURLConnection)url.openConnection();
         HttpURLConnection.setFollowRedirects(true);
         connection.setInstanceFollowRedirects(true);
         connection.setUseCaches(false);
    stev

    forever, unless you set SO_TIMEOUT

  • Question about parsing parameters through url

    Hello,
    I have some questions about parsing parameters through a url.
    What I want to build is a page with some text fields and maybe one drop down list. After user enter values into the text fields and select one option in the drop down list, then press the submit button, a report will be opened, which according to the parameters parsed.
    These were what I have done:
    1. create a blank page and a region
    2. create one text field in the region, the name is FIRSTNAME
    3. create one hidden items FN, of which the source value is item FIRSTNAME
    4. create a process. the type is "Set Preference to value of Item" which set PN with the value of FIRSTNAME when the page submitted
    5. create a button "Submit Page and Redirect to URL", in the URL I entered:
    http://dianti.local.net:9704/xmlpserver/~shichao/GuestFolder/orderdetail/orderdetail.xdo?_xpf=&_xpt=0&_xdo=%2F~shichao%2FGuestFolder%2Forderdetail%2Forderdetail.xdo&FIRSTNAME=&FN.&_xt=orderdetail&_xf=pdf&_xmode=4
    My problem is: it seems working for the first time after I entered a value in the FIRSTNAME text field and press submit button, but when I come back to the page (the report was opened in the same page, wondering how to open it in a new window?), the value is saved in the text field and after I enter another value and submit the page again. It still parse the old value to the report. The value of the parameter doesn't change.
    What's the reason? and is this the correct way to build what I want?
    Thank you in advance.
    Best Regards,
    Shichao

    Hi Scott,
    Thank you again for the help.
    But this didn't answer my question exactly. I have tested what you created and the problem remains. When I first time enter a value in the text field and press the button, it goes to page 2, but the parameter didn't parsed. When I go back to page 1 and then click the button again. After that I can see the value I parsed on page 2. Same thing happens when I try to enter a new value. So which means the button has to been pressed twice to parse the parameter.
    Due to the limitation of my knowledge of Apex. I don't know how to fix it. Could you please help me again and hope you understand what the problem is. Thank you very much.
    Shichao

  • Question about dates shown in finder

    I have a problem and need help.
    First question is: what date is shown in default finder settings on files? Creating date , Modified or added Date? on Mac, Windows?
    The problem lies here, I have to give clients JPEG picture files. we had to re-shoot (what the client does not need to know) The re-shoot was necessary because of a mistake I made:-( anyway ... I have to create zip folders to give him the pictures, but the create and modified dates do not change when zipped. Does anyone know how to change these dates( without re-render the files)?
    Any help is highly apreciated!

    Hi GM1941,
    When using Finder>All Images, the ones that you have more than one copy of are images that you do in fact have more than one of. An image stored under the same name and possibly placed in another location from its original.
    A good example would be if you downloaded all your images to a pictures folder on your desktop. From there you might copy a picture of a family member in a genealogical program and not rename it. There you have two copies.
    If you opened the picture in Photoshop or some other image manipulation software and saved it in a different file format (ex: Tiff, PNG, PICT, GIF) you are again able to save it again- even to the same file- with out renaming it.
    When you use the Finder to search for all images, remember that you are looking for ALL images on your computer, not just the ones in iPhoto.
    The files listed under today, yesterday and last week are a "search" list of documents/files you have opened during those times, not another copy. But, they are connected to the item they represent and, if you drag them to the trash they will indeed be in the trash and can be deleted from there.
    Good Luck,
    John

  • Questions about the content of download meeting recording .zip file

    I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
    Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
    1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
    2) Are there any files that capture mouse movement on a shared desktop?
    Thank you!

    Hi Sean,
    Regarding your first post:
    Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
    Regarding your most recent post..
    "To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
    I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
    - audio
    - a camera feed
    - screensharing
    Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
    "To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
    Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
    For shared PPTs or FTContent files:
    First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
    Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
    Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
    Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

  • A question about comments

    Hi, all,
    I have a question about the comments:
    Program function comments should be included on the block diagram or Front panel, or both. Thanks.

    Many good things have already been mentioned.
    For the Front panel, there should be a clear distinction between toplevel VIs (or any subVIs where the user must interact with the front panel), and subVIs where the front panel is only of interest to the programmer. The needs here are quite different:
    User Interface VIs
    The front panel should be clear and easy to use. All "help" elements, tip strips, etc are geared towards the end user. The icon is irrelevant, because it is typically not even shown. Everything of interest to code maintenance should be on the diagram.
    subVIs
    Here, the front panel can contain a description of what the subVI does, who created it, company and copyright information, version information, limitations (e.g. input A must be >0), URLs or literature references to the algorithm, etc. (Have a look at any of the openG tools!). The "VI properties...documentation" section should be populated. The icon should be descriptive. All controls and indicators should have intuitive names (not just "Numeric 4", or "Array" )
    Comments specific to certain areas of the code should be placed where they apply, especially if the code uses some exotic algorithm that would make the code hard to interpret.
    Use a programming style that is self-documenting. (e.g. Don't unbundle the error cluster check for "equal zero" to switch a case statement. Wire the error cluster directly to the case so you'll get a red/green error case structure. Much more obvious!)
    If these are proprietary VIs with password protected diagrams You should split the comments: Anything of interest to the non-privileged user goes on the front panel, anything else on the diagram.
    In the end, it does not really matters where you place the comments as long as they are easy to find later and still make sense to somebody else 10 years from now. Message Edited by altenbach on 05-30-2005 01:13 PM
    LabVIEW Champion . Do more with less code and in less time .

  • I'm unable to correct a wrong url for my home page in Firefox

    I'm unable to correct a wrong url for my home page and have to manually use a separate bookmark that works once the home page loads. I use 3 url's total for the home page and the other 2 load properly.
    I've searched for the incorrect url and find it in 'about:config at browser.startup.homepage'. I've made the correction to the url but it does not seem to save when I close out of about:config.
    I've reset the home page under Tools and Options many, many times and it still doesn't change what is in
    'about:config at browser.startup.homepage
    I have been able to save the bookmark with the correct url in other folders.
    I've had this problem for quite awhile, at least 8 months or so and keep FF up to date, currently using V33.0.2 and Win7 Home Premium SP1

    I changed the pref.js file and that fixed the problem. thanks to those who responded to this question and for the quick replies. jjg18

  • Techie Question about iWeb, outbound links, and Google Analytics

    Hi,
    I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
    1) My website's online, and GA is working properly.
    2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
    3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
    I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
    Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
    Anyway, hope you can help. Thanks in advance.

    I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
    Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
    The redirect page would be a simple plain text page titled redirect.html and would look like this:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="refresh"
    content="0; Destination URL">
    <title>Redirecting or whatever you'd like to appear at the top of the browser</title>
    </head>
    <body>
    </body>
    </html>
    0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
    OT

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

Maybe you are looking for