Question about DHCP Active IP Table WRT54G v2

I'm seeing something that I need to ask about. On my DHCP Active table, I should only be seeing 2 mac addresses which is mine and my kid's pc. I only connect wirelessly. I have WPA set. I've noticed other mac addresses show up. Although, the ip addresses are similar to my 2 computers. One may be 192.168.2.103 and 192.168.2.104. I'm kinda new to this router DHCP thing, so if someone could explain if in fact someone else is on my network or how I can prevent it.

Yes, It sounds to me like someone is using your wireless to attach to the internet. I have solved this problem  by setting up the security to us the WEP keys. Assign each one of your pc's a WEP key and that will prevent anybody from attaching to your network. Login to your router and under the wireless security go to the WEP key settings. The router will setup 4 KEYS, you can use any of them. Save your settings. Then when you attach to your network it will prompt you for one of the keys. Make sure you have written them down otherwise your going to have to reset your router and start all over. There may be different ways but this has worked for me

Similar Messages

  • Dear Customer Service Team,  I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

    Dear Customer Service Team,
    I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
    Thank you for your help in advance.
    Kind Regards,
    G. Zsolt

    There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
    You may also refer below link
    Sign in, activation, or connection errors | CS5.5 and later

  • WRT54GL router's DHCP Active IP Table don't show wired ones?

    Hello.
    On my old Linksys WRT54GL router (with its latest stock firmware)'s http://192.168.1.1/DHCPTable.asp for DHCP Active IP Table, it only shows wireless connections. How come it doesn't show wired ones?
    Thank you in advance.
    Solved!
    Go to Solution.

    ylime1984 wrote:
    Make sure the wired computers are not on static ip configuration, that there's no IP address permanently assigned to them. They should all be on DHCP, getting IP addresses from the router. If that's ok. It could be with the fw of the router. I suggest you may reflash it but if it didn't resolve the issue, reset the router then reconfigure it. Because on the DHCP client's table, it should show there all devices connected wired and wirelessly thru the router.
    Here's the link for the download site.
    http://homesupport.cisco.com/en-us/support/routers/WRT54GL
    Oh goofy me. Yes, I am using static IP addresses for the wired computers. Hmm, is there a way to view those static IP addresses?

  • Question about DHCP on WRT54G

    Dear all:
    Could I use DHCP for wireless connection and assign private IP for PC for wire connection ?
    Will it conflict to each other ?
    Best Regards
    chen min
    Solved!
    Go to Solution.

    As long as the static IP's you assign are outside of the DHCP scope. You don't want DHCP giving out an address that is already in use.

  • Questions about Extending Active Directory Schema

    We have about 24 Macs at the moment in the environment and we are starting to look at Extending the Active Directory Schema.  I have been doing a lot of reading over the past few weeks and I think that I am more confused the more I research it.  The Windows Servers here are running Server 2008_R2.  So here are my questions:
    1. If we extend the schema does that mean that we do not need an OS X Server?
    2. Is this really the easiest option to go with?
    3. We are looking to be able to apply GPOs to the Macs through Active Directory so will this accomplish it?
    4. Will this also allow Group Policy Preferences to map printers to the Macs automatically too?
    5. Is this the least expensive option?
    6. What is the best way to convince the Windows Administrators that this is how we should proceed?
    Thanks
    Pads

    Hi
    1. Yes. However OSX Server offers far more than MCX or Mac-Style GPOs. NetBoot, SUS, Wiki are some you should be looking at IMO.
    2. Again IMO not really. It takes a lot of work and you really don't want to be doing this on a 'live' server. Set up a lab environment first, thoroughly test it and then go with it when you're happy. The other possible 'gotcha' is you will have no way of knowing if Microsoft decide to change/amend or extend their own proprietary schema in a Revision update sometime in the future. If that does happen then you may be looking at doing it all over again?
    3. Yes, but you will still need WorkGroup Manager installed on a mac client. The documentation is clear about what to do once the Schema has been extended.
    4. Not done this myself but I would think so.
    5. Yes, but is it the 'best' option? Not in my opinion.
    6. Offer them the 'easier' but more expensive alternatives (some of them very expensive) and see which way they jump.
    HTH?
    Tony

  • Question about entries in 3KEH table

    Hello gurus,
    I would like to ask you 1 thing, there are more than 4000 entries in table 3KEH but nowm the customer asked me to enter only range fromm 1000000000 to 2999999999. Which means I need to delete all the entries and then place this range, But it happens to me that some of the accounts I can not delete as they are entered in derivation, in 3kei transaction.
    I can skip those and to the ranges just between, right? lets say the account 1000000030 is entered in 3kei table so in 3hek I will enter 1000000000 to 1000000029 and will continue like this...
    this is time consuming, well...can do that but my question ia if this is a correct procedure, if I can do that and if there will not be any impact.
    thanks a lot for letting me know
    regards
    Hana

    as long as no accounts are missed out or all the field attributes are kept intact, i dont see any impact, it should work as before

  • Simple question about media activation

    Hi, Suppose i give someone a signed media (book) on a SD card. can he plug it into his device, connect to the internet and activate it ?
    the question is, does the activation process need to be done in the same session of the media download, by the same device ?
    Thanks

    The activation begin when you click on the gblink. So when you have the media file, you already did the activation part!

  • Question about ER diagrams and table

    Are there any good online articles that could give you a step-by-step hint on ways in coming up with the perfect tables design and relationship from a business requirement...

    Be very careful about the word "perfect" ...
    Perfection may be possible for a few relatively simple requirements (though even then highly respected practicioners disagree, violently sometimes, on certain things - google "surrogate key" for example).
    Large systems with complex overlapping and possibly conflicting requirements are always a compromise.
    And then the "almost perfect" logical model hits the performance wall ...

  • Question about Global index and Table Partitions

    I have created a global index for a partitioned table now in the future the partitions will be dropped in the table. Do I need to do anything to the global index? Does it need to be rebuilt or would it be ok if partitions get dropped in the table?

    >
    I have created a global index for a partitioned table now in the future the partitions will be dropped in the table. Do I need to do anything to the global index? Does it need to be rebuilt or would it be ok if partitions get dropped in the table?
    >
    You can use the UPDATE INDEXES clause. That allows users to keep using the table and Oracle will keep the global indexes updated.
    Otherwise, as already stated all global indexes will be marked UNUSABLE.
    See 'Dropping Partitions' in the VLDB and Partitioning Guide
    http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007479
    >
    If local indexes are defined for the table, then this statement also drops the matching partition or subpartitions from the local index. All global indexes, or all partitions of partitioned global indexes, are marked UNUSABLE unless either of the following is true:
    You specify UPDATE INDEXES (Cannot be specified for index-organized tables. Use UPDATE GLOBAL INDEXES instead.)
    The partition being dropped or its subpartitions are empty

  • A question about the multiple source table for the logical table

    Hi All,
    I am to test, having two physical sources for an logical table, but it is failing as it is always getting data from only one table rather than two tables.
    !http://picasaweb.google.com/KSivaUS/OracleForumQuestions#5433761212378087346!
    Any suggestion or inputs would be appreciated.
    Thanks
    Siva

    your 2 measure columns are in the same unique - low level??
    your connections look good.
    which is the result if you bring only the sales column at your report??is it the sum of the 2 datasources??
    try to repass again all your bussiness model.or make an other one.
    fisrt pass your fact with 2 sources and then your dimensions....
    as i can see you have customer_dim,do both of your columns have the appropriate key to this dimension??try to make a physical connection from both fact sources to this dimension as well as for time...
    if you do it in this way ,there is no possibility not to work
    hope i helped...
    http://greekoraclebi.blogspot.com/

  • Question about Subroutine and Internal tables

    See I  have this code.
    TABLES: SFLIGHT.
        TYPES: BEGIN OF LINE,
               Carrid like SFLIGHT-CARRID,
               Connid like SFLIGHT-CONNID,
               Fldate like SFLIGHT-FLDATE,
               Seatsmax like SFLIGHT-SEATSMAX,
               Seatsocc like SFLIGHT-SEATSOCC,
               Percen type p decimals 2,
               END OF LINE.
       DATA: ISFLIGHT TYPE STANDARD TABLE OF LINE INITIAL SIZE 10 WITH HEADER LINE.
       DATA: Percent type p decimals 2.
       PARAMETERS: CID LIKE SFLIGHT-CARRID.
       DATA: Num type I value 0.
       INITIALIZATION.
       CID = '004'.
       SELECT CARRID CONNID FLDATE  SEATSMAX  SEATSOCC FROM SFLIGHT INTO TABLE ISFLIGHT WHERE CARRID = CID.
    So far I've gotten this far. but now I need to compute for the percentage, which I'm required to do in a subroutine.
    So I tried
    FORM U TABLES ISFLIGHT STRUCTURE SFLIGHT.
    ISFLIGHT-Percen = ( ISFLIGHT-Seatsocc / ISFLIGHT-Seatsmax ) * 100.
    ENDFORM.
    But I keep getting an error o that. It keeps telling me that ISFLIGHT does not have a Percen field. Also I'm suppose to use a pass by value to this subroutine but I don't know what that means.
    Basically I need to compute for the percentage and insert it tot he internal table. which I would sort by percentage. After which I'm suppose to print the ouput by passing the internal table to the subroutine.
    I know I'm doing something wrong but I just don't know how to fix this since I only started working on subroutines today. Any help would be appreciated.

    Hi.
    line defined in data dictionary. Try this:
    TABLES: sflight.
    DATA: BEGIN OF my_line,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    seatsmax LIKE sflight-seatsmax,
    seatsocc LIKE sflight-seatsocc,
    percen TYPE p DECIMALS 2,
    END OF my_line.
    DATA: isflight LIKE my_line OCCURS 10 WITH HEADER LINE.
    DATA: percent TYPE p DECIMALS 2.
    PARAMETERS: cid LIKE sflight-carrid.
    DATA: num TYPE i VALUE 0.
    INITIALIZATION.
      cid = '004'.
      SELECT carrid connid fldate seatsmax seatsocc FROM sflight INTO TABLE
      isflight WHERE carrid = cid.
    FORM u TABLES isflight STRUCTURE my_line.
      isflight-percen = ( isflight-seatsocc / isflight-seatsmax ) * 100.
    ENDFORM.                    "U
    regards
    Walter Habich

  • Some Question About Access point of the WRT54G

    How many devices can the access point of the WRT 54G support?
    I am looking at hooking up one Wii, 2 laptops and a Nintendo DS will this WRT 54G be able to handle that or will I need other devices.          

    Not sure how many wireless devices the WRT54G can handle.  Most AP's depending on the amount of traffic is around 30 or so.  Here is a link to the web site with the info for the WRT54G.
    http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1149562300349&...
    Richard Aichner (Ikester)

  • Question about DHCP

    Under my System Preference Network Settings my Configure IPv4 is "Using DHCP." When I click on PPPoE it's grayed out.
    How does this affect what I should type in to my Airport Extreme Settings?
    Thanks again!
    L.

    If you're setting up an AirPort Extreme, by default it will act as a DHCP server.
    Message was edited by: adsfushi72

  • Question about DHCP Reconciling.

    Does Windows auto reconcile DHCP scopes or is this something I need to do manually?
    Shawn

    Hi,
    Just to add, DHCP reconciliation is a process in which you manually initiate the DHCP database consistency check. While reconciling, the DHCP server checks if the DHCP database is consistent with the Windows registry, and no errors or issues are present
    in the database.
    In addition,  the Enterprise Admin, Domain Admin or local administrator account credentials must be used while initializing the DHCP reconciliation process.
    Best regards,
    Susie

  • Question about iPhone activation

    Here in Uruguay there is a Mobile Company called Antel and it not sells CDMA based contracts. If i buy an iPhone i would have to buy a 3G chip, but I'm not sure if that will work on iPhone. I  have read that once you put the micro sim in the phone you have to Set it. What kind of setting? Does the iPhone work with any company or need a special kind of service?

    Hello AlexBerken,
    Try the steps as mentioned in the link below.
    http://support.apple.com/kb/ts3424

Maybe you are looking for