Question about IO assignment

Hi,
What exactly is IO assignment for?
Lets say if I am doing time conversion deriving 0FISCYEAR from 0FISCPER. Then in this case target field is 0FISCYEAR & source field is 0FISCPER. So now for IO assignment for 0FISCPER which field will come and why?
Thanks,
sam

I can give you a case for reading master data, and why IO assignment is necessary there.
In my scenario I have an transaction BC data source, 0CO_OM_WBS_6, with the field POSID (which stands for WBS Element). In addition, I need an attribute from the WBS Element.
In the 'reading master data' transformation I assign POSID to 0WBS_ELEMT in the IO Assignment. This will let the BW Engine know that it is the 0WBS_ELEMT I'm retrieving data from. The target field will be the attribute I'm retrieving from the 0WBS_ELEMT. The BW Engine would not know that POSID represents 0WBS_ELEMT unless I set it in the IO Assignment.
Hope this example helped to make it a bit clearer.
Best regards,
Torbjorn

Similar Messages

  • A question about users assigned roles extraction

    Dear all,
    I have a question about users assigned roles list extraction. I need the list of the users who have already been created along with their assigned roles. According to what I found on Google, there is a table named AGR_USERS which provides the roles assigned to each user. Yet, this table provides only the SAP ID of each user along with the assigned roles. What I need more is to have also the first name and second name of each user.
    So, do you know any table providing at least the following information:
    1) First name of each user
    2) Second name of each user
    3) SAP ID of each user
    4) All assigned roles to each user.
    NOTE: I really need to have first name and second name in separate columns
    Thanks in advance,
    Dariyoosh

    >
    Shekar.J wrote:
    > Agr_users for the user ID and role assignments
    > USR02 to check the validity of the User ID
    > and USER_ADDR for the first name and last name
    >
    > You can create a Table join of the above 3 tables to retrieve the data you require
    Thanks to you and others for your attention to my problem
    I don't know anything about ABAP programming, is there any transaction allowing to create this join? As it seems to me the column "UNAME" in the table "AGR_USERS" and the column "BNAME" in the table "USER_ADDR", both refer to the SAP ID of the user. As a result the condition of the join would be "WHERE (UNAME = BNAME)", is there  any transaction/programme allowing to create this join?
    Thanks in advance,
    Dariyoosh

  • Question about Documents Assignment

    At the T_code:MM02, I maintain a  material with a document assingment of 5000000001,but as I put the the material in a BOM,the document couldn't appear in the BOM item which label named "documents assignment".Can anyone tell me the reason?
    best reguards,
    Liangcong Huang

    Hi Huang,
    As documents are linked through object links,Material Master,BOM Header & BOM Item are three different objects.
    Firstly the documents which are linked in Material Master the same has to be viewed without attaching in BOM,
    docuble click on component where it leads to material master display screen and see the document.
    Secondly from DMS, documents cannot be linked to BOM Header and BOM Item.Even though if u want to link ,attach documents while u create BOM
    Regards
    Bhanu

  • About account assignment category

    Hi, I have a question about account assignment category.I hope someone give me the answer , and I would appreciate it.
        If there is a final product A, and the planning strategy for A is 20(MTO), the procurement type of A is F(external procurement) at the view mrp2 in the material master datas.
    step1: I creat a sales order.
    step2: run MRP for A.
    step3: transfer the purchase requistion into a purchase order,and the field of acc.***.cat. in the purchase order will be filled out M automatically, because the acc.***.cat. in the planning strategy 20(MTO) is set with E.
        Well, the purchase order is created, what is the relationship between the sales order and the purchase order? What will be happened about costing between the SO and the PO?
        If I delete the E, I make the PO become a standard PO, what is difference between standard PO and the PO including E?
    Best Regards
    Bob

    Hi,
    Definition: Account Assignment Category: - A key indicating whether an item is to be assigned to an auxiliary account (such as a cost center).
    The account assignment category determines which account assignment details are required for the item (for example, cost center or account number).
    Generally used Account Assignment Categories are Cost Center (K) in case of Miscellaneous Purchases, Assets (A) in Capital Goods Purchases, etc...
    You can configure Account Assignment Category in Transaction OME9 OR you can go with following path;
    SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories
    Her you have to perform following Activities;
    1.  Check the attributes of the account assignment categories
    2.  Maintain the account assignment categories to suit your requirements

  • A question about assigning a default value

    Hi guys, I have a question about assigning a default value to a Numeric Decision CO. This Co needs 2 parameters to compare with each other. I wanna assign para1 during runtime and para2 during design time, but I have no idea how to assign a default value to para2 during design time. Can anyone help me solve this question? Thx a lot.
    BTW I`m searching an article about Time-off example`s "details". I have read several articles about time-off example, but those are not detailed enough. I wanna know about all details of COs. Can anyone forward such article to me, plz.  Thx again.^^

    Hi,
    You can assign a default value to the parameter of a callable object.
    First attach your CO to an Action.At the action level you can assign default values to the CO Parameters.
    Select the action in the design time.
    Select the parameters tab for that action.
    Select the required paramter. At the top, you can find Default value tab, with that you can assign default value.
    I think you can achieve your requirements with Business logic CO better.
    [Business Logic CO|http://help.sap.com/saphelp_nwce10/helpdata/en/44/3d3936c5c14a8fe10000000a1553f6/content.htm]
    Thanks

  • Question about VPN on RV082

    Question about VPN on RV082
    i connect like diagram
    when i use shrewsoft for vpn ipsec i can not connect across rv082 to next hop on wan 1
    but when i use PPTP on windows 7 for vpn PPTP i can connect across rv082 but high latency on this connection
    please advice me for this issue
    many thank i hope someone help me on this

    ChicagoGuy72 wrote:
    Hello,
    I am working with vpn setups for the first time, so I have some questions I would really appriciate some help with. I would like to be able to connect to a computer on a home network through a linksys E2500 router. I have found alot of documentation on connecting to an external vpn from a computer on the lan side of the router, but nothing on connecting from the outside in. The router does have a static ip address with my internet provider, so I can contact the router from the outside. But makeing the connection to the computer on the other side of the router is where I am missing something or I dont realize that it is not possible. On the lan side I am using DHCP to assign the address to the computer I want to connect to. Perhaps I need to make it have a static address also? I realize that when I configure the connection from the outside that I need to direct the connection to the remote computer in some way, unless vpn connections are fully passed through the router and the connection issue I am haveing is with the "inside" computer.
    Other info:
    I am using windows 7 for the vpn access
    Thank you in advance for your help.
    Kindly check these links:
    http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
    http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a008009436a...

  • Basic questions about Infocube

    Hi, everyone.
    I got very basic questions about infocube data handling.
    With infopackage, I extracted all the data about employees from R/3.
    But there were some mistakes during inputting employee data, like positions,
    so I just extracted those employees data once more.
    Now I have two requests in infocube, where the first one has some wrong data.
    Is there any solutions about this?
    I might got it all wrong, so as beginner, any suggestions and explanations will
    be grateful.

    Hi,
    You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
    Other option is to make setting in the Infopackage to delete similar or overlapping request.
    Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or  More Comprehensive "
    Assign points if useful
    Regards
    Venkata Devaraj !!!

  • Question about PNP...LDB

    Hi All,
    I have been asked a simple but strange question about PNP LDB. When we assigned logical database in our program, it will basically create a selection screen, which have certain fields. Like Today.. Some date ranges. Person assigned number, company code, company status.
    From my standpoint I know when ever we give selection to PNP screen we have to check this selection parameters in our programs, like date range ,person number, employee status etc ….RIGHT?
    Somebody ask me that without checking selection in our report I mean any parameters, it can filter the record, my Answer was BIG “NO”. You need to check all the parameters in your program.
    Next question asked by me was what the purpose of PNP. I replied that rather then declaring and doing bunch of databases SAP provide logical database so current all the records and do what ever you like to do.
    What you think guys?
    Thanks

    Here`s the question , when I am giving "1"active employee in employee status why its pulling up the information for '0' withdrawn employee?
    Message was edited by: Saquib Khan

  • A question about creating packages as local objects in ABAP

    Hi,
    I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
    What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
    Thanks in advane,
    Kind Regards,
    Dariyoosh

    Thomas Zloch wrote:
    Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
    > Thomas
    >
    > P.S. this applies to the package name only, of course
    Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
    Once again, thank you very much for your help.
    Kind Regards,
    Dariyoosh

  • Question about Logon ticket with user mapping at BI-JAVA environment

    We're implementing BI 7.0 including BI Java and SAP EP for end user
    access.
    I have two question about SSO method when we're using BI Java.
    I know we can simply configure SSO logon ticket with BI-Java(EP
    included) and BI-ABAP through BI template installer and we already
    succeeded in that case.
    But the problem is we want to change it to user mapping SSO method for
    some our internal reason.
    After we configure user mapping SSO, we've got SSO failed error when we
    call BI-Java stuff like BEx Web Application iView.
    After many testing implemented, we found SSO Logon ticket with user
    mapping (using SAP reference system). It seems working now.
    But our question is "Is it no problem when we use SSO logon ticket with
    user mapping?" Is there any restriction or issue?
    One more question is we can ONLY use user base mapping when reference
    system used. How can we assign BI-ABAP users to EP Group?

    Using an SAP Reference system is allright. But if the reason u r going for this is because of different usernames in EP and BI, why dont you go for user mapping.
    Anyways, on restriction of reference syetms is that you can have ONLY ONE reference system defined in portal. In you case you can only have the BI system defined.
    Hope this helps!!

  • Question about ERMS push

    Hi Guru,
    I am prototyping the ERMS push solution in CRM7 and have some questions about the solution SAP help provided.
    Below is the detail about ERMS push:
    Here the e-mail is first handled by the e-mail pull mechanism: it is converted into a
    SAPoffice mail and analyzed by ERMS to find out more details about the mail (like language and certain keywords).
    Then the mail (including the additional information from the ERMS analysis) is transferred to the
    CMS (Communication Management Software). The CMS determines the appropriate agent team and
    dispatches the mail via the push process to an available agent of that team.
    Below is the sap help link:
    http://help.sap.com/saphelp_crm70/helpdata/EN/0e/6a22b86821468691bd5abb51dfd81e/content.htm
    I have below questions about the solution in the help link:
    1. It mentioned about the email profile (set the agent inbox as email provider) and I changed the u201Cdefaultu201D profile delivered by sap. I setup the rule policy according to the help and assigned it in the service manager profile. The purpose of ERMS push is to push email to CMS instead of sending to agent inbox using ERMS. Which business role should this email profile be assigned to? Is it IC_agent?
    2. The help also mentioned about setup u201CERMS_ACTIONu201D as communication system ID in CRMM_BCB_ADM. Does this ID need to be added in the CMS profile? If so, which business role should this CMS profile be assigned to? Is it IC_Agent?
    3. The ERMS uses workflow WS00200001. After the email is pushed to CMS, what status should the workflow be, in progress or complete? Also does it suppose to have agent assigned in the workflow task?
    4. After the CMS pushes the email back to CRM, it will be a pop up for agent to accept or reject. Will it create an interaction record once the agent clicks the accept?
    It would be great if you could shed some light on this.
    Thanks in advance!
    Zhi Jie Kong
    Edited by: Zhijie Kong on Apr 28, 2011 4:32 PM
    Edited by: Zhijie Kong on Apr 28, 2011 4:47 PM

    Hello Zhijie,
    Let me see if I can help address some of your questions.
    1) It doesn't matter which business role you use. You can copy IC_AGENT for example. The important thing is, as Mariusz mentions in this thread, [ERMS email push: problem with CAD and transfer;,your E-Mail profile must be set for E-Mail Provider = 2 (Agent Inbox).
    2) No, this ID itself does not need to be added to any business role (as I assume it is hardcoded in the SAP workflow as Mariusz mentions).
    3) From what I remember, the ERMS Push emails are not set to complete by the system, and therefore can still get inadvertantly routed to agents! I recommend to have a second rule in your Rule Modeler policy to route the ERMS Push emails to a special, separate queue where you can close them out easily without worrying about them getting assigned to any agents!
    4) Yes, the email will arrive like a phone call with the accept/reject buttons flashing (though it will show as an email, not a phone call). And yes, when the agent accepts an Interaction Record will be created by the system automatically.
    I hope this helps you!
    Regards,
    John

  • Questions About JSP?

    hi;
    I am php devloper and I am learning Java now.
    I am using NB6.1 , Tomcat 6.0 , J2ee 5.
    I have some questions about devleoping web application with jsp.
    1.What are
    /WEB-INF/web.xml
    /META-INF/context.xml
    /META-INF/MANIFEST.MF
    files that generated with NB.are important or optional.are auto generated or may I edit.
    2.can I distribute my web application in non text format.How?
    3.if I want to add some files to my application that its running in tomcat.how can i do that with out rebuild all.
    thank you
    Add to mtz1406's Reputation

    thank you all for helping.
    I will write more information about my questions may this help others:
    *{ /WEB-INF/web.xml* - The +Web Application Deployment
    Descriptor+ for your application. This is an XML file describing
    the servlets and other components that make up your application,
    along with any initialization parameters and container-managed
    security constraints that you want the server to enforce for you.
    This file is discussed in more detail in the following subsection.
    As mentioned above, the <code>/WEB-INF/web.xml</code> file contains the
    Web Application Deployment Descriptor for your application. As the filename
    extension implies, this file is an XML document, and defines everything about
    your application that a server needs to know (except the context path,
    which is assigned by the system administrator when the application is
    deployed).
    The complete syntax and semantics for the deployment descriptor is defined
    in Chapter 13 of the Servlet API Specification, version 2.3. Over time, it
    is expected that development tools will be provided that create and edit the
    deployment descriptor for you. In the meantime, to provide a starting point,
    a [basic web.xml file|http://localhost:8080/docs/appdev/web.xml.txt]
    is provided. This file includes comments that describe the purpose of each
    included element.
    NOTE - The Servlet Specification includes a Document
    Type Descriptor (DTD) for the web application deployment descriptor, and
    Tomcat 6 enforces the rules defined here when processing your application's
    <code>/WEB-INF/web.xml</code> file. In particular, you must
    enter your descriptor elements (such as <code><filter></code>,
    <code><servlet></code>, and <code><servlet-mapping></code> in
    the order defined by the DTD (see Section 13.3).
    h4. } from tomcat documentation
    Tomcat Context Descriptor
    bq. A /META-INF/context.xml file can be used to define Tomcat specific \\ configuration options, such as loggers, data sources, session manager \\ configuration and more. This XML file must contain one Context element, which \\ will be considered as if it was the child of the Host element corresponding \\ to the Host to which the The Tomcat configuration documentation contains \\ information on the Context element.
    }from tomcat documentation
    but I still want more information about this question:
    Q3: I want to distribute (sell to another organaization) without give sorce code in jsp files.So I want to precompile it to be just class files or jar files.
    I want to use ant that become with netbeans 6.1.can anyone give me information about how to do that.
    thank you again

  • Question about size of ints in Xcode

    Hello. I have a a few quick questions about declaring and defining variables and about their size and so forth. The book I'm reading at the moment, "Learn C on the Mac", says the following in reference to the difference between declaring and defining a variable:
    A variable declaration is any statement that specifies a variables name and type. The line *int myInt;* certainly does that. A variable definition is a declaration that causes memory to be allocated for the variable. Since the previous statement does cause memory to be allocated for myInt, it does qualify as a definition.
    I always thought a definition of a variable was a statement that assigned a value to a variable. If a basic declaration like "int myInt;" does allocate memory for the variable and therefore is a definition, can anyone give me an example of a declaration that does not allocate memory for the variable and therefore is not a definition?
    The book goes on, a page or so late, to say this:
    Since myInt was declared to be of type int, and since Xcode is currently set to use 4-byte ints, 4 bytes of memory were reserved for myInt. Since we haven't placed a value in those 4 bytes yet, they could contain any value at all. Some compilers place a value of 0 in a newly allocated variable, but others do not. The key is not to depend on a variable being preset to some specific value. If you want a variable to contain a specific value, assign the value to the variable yourself.
    First, I know that an int can be different sizes (either 4 bytes or 8 bytes, I think), but what does this depend on? I thought it depended on the compiler, but the above quote makes it sound like it depends on the IDE, Xcode. Which is it?
    Second, it said that Xcode is currently set to use 4-byte ints. Does this mean that there is a setting that the user can change to make ints a different size (like 8 bytes), or does it mean that the creators of Xcode currently have it set to use 4-byte ints?
    Third, for the part about some compilers giving a newly allocated variable a value of 0, does this apply to Xcode or any of its compilers? I assume not, but I wanted to check.
    Thanks for all the help, and have a great weekend!

    Tron55555 wrote:
    I always thought a definition of a variable was a statement that assigned a value to a variable. If a basic declaration like "int myInt;" does allocate memory for the variable and therefore is a definition, can anyone give me an example of a declaration that does not allocate memory for the variable and therefore is not a definition?
    I always like to think of a "declaration" to be something that makes no changes to the actual code, but just provides visibility so that compilation and/or linking will succeed. The "definition" allocates space.
    You can declare a function to establish it in the namespace for the compiler to find but the linker needs an actual definition somewhere to link against. With a variable, you could also declare a variable as "extern int myvar;". The actual definition "int myvar;" would be somewhere else.
    According to that book, both "extern int myvar;" and "int myvar;" are declarations, but only the latter is a definition. That is a valid way to look at it. Both statements 'delcare' something to the compiler, but on the second one 'define's some actual data.
    First, I know that an int can be different sizes (either 4 bytes or 8 bytes, I think), but what does this depend on? I thought it depended on the compiler, but the above quote makes it sound like it depends on the IDE, Xcode. Which is it?
    An "int" is supposed to be a processor's "native" size and the most efficient data type to use. A compiler may or may not be able to change that, depending on the target and the compiler. If a compiler supports that option and Xcode supports that compiler and that option, then Xcode can control it, via the compiler.
    Second, it said that Xcode is currently set to use 4-byte ints. Does this mean that there is a setting that the user can change to make ints a different size (like 8 bytes), or does it mean that the creators of Xcode currently have it set to use 4-byte ints?
    I think that "setting" is just not specifying any option to explicitly set the size. You can use "-m32" or "-m64" to control this, but I wouldn't recommend it. Let Xcode handle those low-level details.
    Third, for the part about some compilers giving a newly allocated variable a value of 0, does this apply to Xcode or any of its compilers? I assume not, but I wanted to check.
    I don't know for sure. Why would you ask? Are you thinking of including 45 lines of macro declarations 3 levels deep to initialize values based on whether or not a particular compiler/target supports automatic initialization? Xcode current supports GCC 3.3, GCC 4.0, GCC 4.2, LLVM GCC, CLang, and Intel's compiler for building PPC, i386, and x86_64 code in both debug and release, with a large number of optimization options. It doesn't matter what compiler you use or what it's behavior is - initialize your variables in C.

  • Questions about  Invoice against PO

    Dear all,
    I have a question about Invoice against PO.
    The background is:
    I have a PO with 1 line items, when I create an invoice via the transaction MIRO, I have to separate the account assignment to different cost object. (e.g. I have separate to three cost objects: Cost Centre A, Cost Centre B and Cost Centre C)
    After the invoice is created, I find that in the Purchase Order History tab page, it shows two lines with same invoice number.  (the first line have the amount of the first account assignment, the second line is the sum amount of the remain account assignments)
    My question is how to group all account assignment into one lines in the Purchase Order History?
    Many thanks
    Sunny

    For this,
    You need to divide the account assignment in PO itself.
    Po should contain 3 cost centres and corresponding GL.
    For such PO if you make GR, automatically system will allocate material to respective cost elements.
    Raghavan

  • Basic questions about CISCO IOS

    Hi everybody, Jack here,
    I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
    Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
    I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
    Thank you all so much for reading through the wall of text:)
    Jack

    Jack
    Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
    If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
    If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
    I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
    HTH
    Rick

Maybe you are looking for