Question about loading time determination in OVLZ
Hello,
In t-code OVLZ, field "Determine load. time", the F1 explanation is bellow:
-No loading time determination
No loading time is determined
-A Route-dependent
A route-dependent loading time is determined.
Influencing factors are the shipping point, the route, and the loading group
-B Route-independent
A route-independent loading time is determined.
Influencing factors are the shipping point, the route, and the loading group of the material.
can somebody tell me what is the difference between A B? It seems to be the same according to the 2nd line explanation of B.
Thanks,
Gunadi
hi,
in OVLZ-shipping point- working hours
determine load time: the option A -stands for route dependent
means loading times is determined with combination of shipping point+ route+ loading group
option B- stands for route Independent
Means loading time is determined with comnination of shipping+ loading group
the loading time will have effect on delivery sch ie., taken into account for forward scheduling else backward scheduling
hope this help u
regards,
Arun prasad
Similar Messages
-
Some questions about a Time Capsule
Hi!!
I just have a few questions about a Time Capsule, but first let me explain the backgroud to my questions.
I live in a 2 floor house(including a basement) and my bedroom is downstairs. My parents currently have a desktop PC connected to our wireless router and our printer. Me and my step-father both have 13 inch MacBook Pros, and he uses the Mac like a basic computer, so the equipment connected to our PC is good for him. I, on the other hand, use my Mac, iPad and iPhone to their fullest potential. I am a SUPER MEGA NERD when it comes to computers, so I plan on making my bedroom an amazing office at the same time. So I want an AirPrint Enabled printer in my bedroom (Under 100$$) along with a Time Capsule to back up my information, because everyday I look around in the backdoor of my Mac alot, and if I jack anything up (And I cant handle the problem) I would like to restore my Mac to a previous version. So here are my questions:
1) My bedroom is right underneath our router, so i get GREAT Wi-Fi in my room. If I get a Time Capsule, can I use it in my room to extend my Wi-Fi, and how would that work? Will it extend my wifi under the same name, because I would like my own Wi-Fi (Titled to what I want with my own password)
2) If I have to create a NEW Wi-Fi network, how would I do that?
3) Would I need to connect my new printer directly to my ROUTER, or could I connect it to the TIME CAPSULE?
If you don't understand what I'm trying to ask (Even though I feel like it's self-explanatory)
ONE question about the PRINTER: Do any of you have any recommendations for an AirPrint Enabled printer under 100$? Even under-150$ would be okay.
THANKS FOR ANY HELP!!!!everyday I look around in the backdoor of my Mac alot, and if I jack anything up (And I cant handle the problem) I would like to restore my Mac to a previous version. So here are my questions:
Don't just depend on TM.. use a disk image type utility.. either one of the Mac tools, SuperDuper, CCC, Chronosync or even a linux boot cd (if you have a cd/dvd drive still or via usb can boot) a great tool is Clonezilla.. it will do basically any computer, Mac, Linux, Windows.. and since it boots into its own OS can restore a computer in a flash. Then you can add the incremental changes from TM.
1) My bedroom is right underneath our router, so i get GREAT Wi-Fi in my room. If I get a Time Capsule, can I use it in my room to extend my Wi-Fi, and how would that work? Will it extend my wifi under the same name, because I would like my own Wi-Fi (Titled to what I want with my own password)
Actually I am surprised you get good wireless as usually directly above or below a router is often the worst spot. Time Capsule cannot extend the wireless of any other router than Apple.. it is a special system and only Apple can join the club. It has bad effect though, if you set the TC to extend wireless it turns off ethernet ports.. which is hugely dumb.
The best arrangement is ethernet to the upstairs.. or EOP adapters. If not then a wireless router that matches the existing unit will generally be better than mixing apple and non-apple.
2) If I have to create a NEW Wi-Fi network, how would I do that?
3) Would I need to connect my new printer directly to my ROUTER, or could I connect it to the TIME CAPSULE?
You create a new wireless network by selecting manually the wireless channel and use different wireless name, ssid and security. There are 3 available channels on 2.4ghz.. your existing router will use one or two.. depending on if the setting is 20mhz or 40mhz.. so you need to manually set everything and not use auto.
TC is slow on 2.4ghz cf 5ghz and there are many more channels at 5ghz but not everything can use it.. iphone for instance is 2.4ghz only . whereas ipad can use 5ghz.. most full computers now can use 5ghz.
Buy a wireless network printer. Or alternatively an ethernet network would be also ok but now are more expensive than wireless ones. Network printers are not much more than straight USB and work much better.
I do not use airprint so have nothing to offer.. find the best HP model in your budget.. but others may have had more experience.. I use ethernet connected b/w laser business type HP.. they work great.. but airprint is too recent an innovation for me. -
Newbie question about loading servlets on tomcat
I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
http://localhost/servlet/HelloServlet
Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
Many thanks
MarcYou have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
<web-app>
<servlet>
<servlet-name>HelloServlet</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/HelloServlet</url-pattern>
</servlet-mapping>
</web-app> -
Question about loading hierarchy
Hello expert,
I have some question about hierarchy loading:
(1) hierarchy DS are all for BW3.X? does it need DTP for this loading ?
(2) in Process chain, "DTP process" or "saving hierarchy process" are all needed in PC ? or just one of them is needed?
Many Thanks,You do not need DTP to load hierarchy.
In the PC, you need to add the info package and after that attribute change run to load the hierarchy fron hierarchy DS.
Regards,
Gaurav -
Few questions about Oracle Times ten
Moved to Few questions about Oracle Timesten
Edited by: ankurk on Nov 4, 2010 6:50 PM
Moved to right place... timestenHi,
it is better to ask in the [url http://forums.oracle.com/forums/forum.jspa?forumID=244] Times Ten Forum.
Herald ten Dam
http://htendam.wordpress.com -
Dealing with a lot of images....Thinking about load time
I am designing a web site that has roughly 30 unique images per page. Each page has a photo gallery which swaps images in the main content area. Also, there are some other miscellaneous graphics that are reused on each page.
1) Should I create an images folder for each page or is there downside to having 200+ images in one folder?
2) Is there a way to see the size of a page (in mega bytes) and get a feel for the load time?
Thanks!
GaryIf it were me, I would create a new folder for each of the pages that have your 30+ unique images - that way they are all organised by page,I find that if you ever need to change them they are filed in a logical way and easier to maintain.
I would then have another folder containing all the images that will be used on all pages. Like header, logo, background images etc.,
Nancy has given you a link on how to best get a report on the file sizes used in your site.
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap -
Question about Load balancing with IISPROXY
Hi,
We are running WLS 5.1.0 SP5 on NT 4.0 SP6. We are not using clustering.
We are able to round robin between multiple instances of the WLS successfully.
Question: If one of the instances of WLS goes down, is there any way to configure
the plugin to take it out of the loop automatically (without using clustering)?
Thanks,
Anil.
This is not the syntax. Syntax is just this:
MaxSkips=something.
eg: MaxSkips=25
The doc says:
5:10:1000 for min:default:max
By which we mean that default value is 10, max is 1000 and min is 5. I guess the
docs are confusing about the syntax here. We will correct them.
--Vinod.
Anil Kommareddi wrote:
> Vinod,
> I could not find any documentation on the MaxSkips parameter except in the Service Pack
> docs. The syntax is MaxSkips=min:default:max.
>
> how do the min and max parameters work?
>
> Vinod Mehra wrote:
>
> > Even if the servers in the WebLogicCluster list are non clustered you WILL be
> > able to do load balancing. But the problem is if the servers go down the plugin
> > will not remove them. But it not that bad. If an connection attempt fails the
> > server is marked as bad and will be skipped for the next MaxSkips (default=10)
> > cycles of load balancing. MaxSkips parameter is configurable for IISProxy
> > (SP4 onwards, I think).
> >
> > -Vinod.
> >
> > Prasad Peddada wrote:
> >
> > > I believe there won't be any load balancing unless you use servers in a cluster. As
> > > an alternative you can use hardware load balancers directly in a situation like this.
> > >
> > > Anil Kommareddi wrote:
> > >
> > > > Hi,
> > > >
> > > > We are running WLS 5.1.0 SP5 on NT 4.0 SP6. We are not using clustering.
> > > > We are able to round robin between multiple instances of the WLS successfully.
> > > >
> > > > Question: If one of the instances of WLS goes down, is there any way to configure
> > > > the plugin to take it out of the loop automatically (without using clustering)?
> > > >
> > > > Thanks,
> > > > Anil.
> > >
> > > --
> > > Cheers
> > >
> > > - Prasad
-
Question about loading and using Images.
I know how to load an image and to draw it onto a canvas etc etc. However my question is to do with the efficiency of loading multiple images (possibly the same image!) and using them together. I have multiple objects, all instances of the same class, which all draw themselves onto a screen in different positions. However they all use the same 3 images (depending on an internal state).
So if I create 5 of these objects and each object calls to load the same image using something along the lines of:
url = this.getClass().getResource("MyImage.png");
normalImage = Toolkit.getDefaultToolkit().getImage(url);Does this mean that in the memory there are 5 exactly the same copies of this image? Or does java do something clever and use one image that they would all reference? I suspect I will have 5 in memory but I wanted to ask about this before going and making an imageManager class where I load all the images and just use getMethods in that when drawing. I will not be preforming any transforms or anything on any of the images so they can all literally be the same image but simply drawn in multiple positions on the one canvas.
(note: I am using active rendering to draw these images myself and then blit it to the screen ...).Use ImageIO rather than Toolkit--with Toolkit you need to use a MediaTracker to ensure you have your image loaded before you try to use it.
If you load an image and then do this:
MyImage1 = MyImage;
MyImage2 = MyImage;
MyImage3 = MyImage;
There are 4 references to the Image in MyImage. If you don't specifically use a method that gives you a new Image, usually, you are getting a refrence to an image already loaded in memory. -
Question about Load Average in the AWR report
Hi,
I've some database in 11.2 RAC on AIX.
I was analyzing the root causes of eviction.
Looking AWR Report before the reboot I see:
DB1
Host CPU (CPUs: 6 Cores: 3 Sockets: )
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
4.18 12.33 60.9 12.6 1.6 26.5
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 27.4
% of busy CPU for Instance: 37.3
%DB time waiting for CPU - Resource Mgr: 10.6
DB2
Host CPU (CPUs: 6 Cores: 3 Sockets: )
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
3.77 13.93 60.7 12.5 1.6 26.7
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 6.9
% of busy CPU for Instance: 9.5
%DB time waiting for CPU - Resource Mgr: 0.0
Do you think these value ar high?
This is vmstats at the time of reboot:
DATA
RUN
BCK
AVM
FRE
PRE
PPI
PPO
PFR
PSR
PCY
FIN
FSY
FCS
CUS
CSY
CID
CWA
07/21/2013
00:08:17
31
0
7.400.345
579.923
0
81
0
0
0
0
3.292
187.010
19.560
84
16
0
0
07/21/2013
00:08:17
17
1
7.390.187
589.884
0
176
0
0
0
0
3.681
169.994
21.482
81
19
0
0
07/21/2013
00:08:17
27
1
7.402.121
577.816
0
115
0
0
0
0
3.150
157.210
18.503
84
16
0
0
07/21/2013
00:08:48
19
1
7.422.966
564.179
0
211
0
0
0
0
2.396
152.667
19.368
84
16
0
0
07/21/2013
00:08:48
19
1
7.427.693
559.268
0
162
0
0
0
0
2.990
154.733
19.843
85
15
0
0
07/21/2013
00:08:48
23
1
7.441.204
545.530
0
204
0
0
0
0
2.137
171.501
18.151
84
16
0
0
This is mpstat:
DATA
CPU
MIN
MAJ
MPC
INT
CS
ICS
RQ
MIG
LPA
SYSC
US
SY
WT
ID
PC
07/21/2013
00:08:48
0
12896
44
0
1279
3030
1362
2
367
100
27313
86
14
0
0
0.49
07/21/2013
00:08:48
1
11055
93
0
1123
3137
1315
1
222
100
31860
85
15
0
0
0.51
07/21/2013
00:08:48
2
5938
51
0
1465
3840
1294
2
532
100
29992
85
15
0
0
0.49
07/21/2013
00:08:48
3
6266
57
0
1247
3177
1046
2
511
100
22793
85
15
0
0
0.51
07/21/2013
00:08:48
4
2661
18
0
1729
4087
1707
4
264
100
24647
85
15
0
0
0.49
07/21/2013
00:08:48
5
4211
10
0
1395
2709
1101
2
209
100
21019
86
14
0
0
0.51
07/21/2013
00:08:49
0
9372
27
0
1150
2583
1219
0
245
100
47745
82
18
0
0
0.47
07/21/2013
00:08:49
1
11327
13
0
726
1803
794
1
130
100
25239
87
13
0
0
0.52
07/21/2013
00:08:49
2
8970
118
0
1459
4396
1517
0
602
100
24833
81
19
0
0
0.49
07/21/2013
00:08:49
3
7328
267
0
1329
4136
1273
2
586
100
25385
81
19
0
0
0.51
07/21/2013
00:08:49
4
8793
19
0
1133
2583
1036
1
235
100
24327
86
14
0
0
0.50
07/21/2013
00:08:49
5
8239
12
0
1309
2846
1165
1
277
100
18513
86
14
0
0
0.50
Thank youThank you Jonathan,
i'm looking ASH, 15 minutes before the crash.
I've 13% of buffer busy waits and 13% of cpu quantum
Avg Active
Event Event Class % Event Sessions
CPU + Wait for CPU CPU 59.09 0.15
buffer busy waits Concurrency 13.64 0.04
resmgr:cpu quantum Scheduler 13.64 0.04
The buffer busy waits was caused by an update of a table.
There are ETL jobs that runs every nigth.
Looking IO stats I notice a change in the use of the swap:
before the crash:
hdisk66 xfer: %tm_act bps tps bread bwrtn
1.0 8.2K 2.0 8.2K 0.0
read: rps avgserv minserv maxserv timeouts fails
2.0 6.7 3.8 9.6 0 0
write: wps avgserv minserv maxserv timeouts fails
0.0 0.0 0.0 0.0 0 0
queue: avgtime mintime maxtime avgwqsz avgsqsz sqfull
0.0 0.0 0.0 0.0 0.0 0.0
near the crash:
hdisk66 xfer: %tm_act bps tps bread bwrtn
71.0 241.7K 59.0 241.7K 0.0
read: rps avgserv minserv maxserv timeouts fails
59.0 12.1 0.2 183.5 0 0
write: wps avgserv minserv maxserv timeouts fails
0.0 0.0 0.0 0.0 0 0
queue: avgtime mintime maxtime avgwqsz avgsqsz sqfull
0.0 0.0 0.0 0.0 0.0 0.0 -
Question about Load Balance SFTP service by using CSS1150X
Does anyone come across of load balancing SFTP service by using CSS1150X? Typically by configuring CSS1150X to load balance FTP service, the configuration will as follow:
content ftp_rule
vip address 192.168.3.6
protocol tcp
port 21
application ftp-control
add service serv1
add service serv2
add service serv3
active
group ftp_group
vip address 192.168.3.6
add service serv1
add service serv2
add service serv3
active
However, for my personal understanding and knowledge, I will configure my CSS1150X as follow to load balance SFTP service:
content sftp_rule
vip address 192.168.3.6
protocol tcp
port 22 //Change 21 to 22
application ftp-control
add service serv1
add service serv2
add service serv3
active
group sftp_group
vip address 192.168.3.6
add service serv1
add service serv2
add service serv3
active
My question is, "application ftp-control" in content "ftp_rule" is still applicable to SFTP or not?I believe application ftp-control would not be used for sftp.
This might cause the session to get dropped when there is no data channel created and cause issues with long connections.
Hope it helps!! -
Easy question about install time
Hello,
I have been having a lot of problems with my MacBook and after posting on the forums it seems a re-install might help. This is my firt time doing a wipe/install so I backed up my files and booted from my Tiger install DVD and did a wipe/install and I am staring at in installing right now. It seems to be taking forever! It has been going for about 2 hours now and is about 1/3 of the way finished and says it has 3 hours 43 minutes to go. Is it supposed to take this long?Hi,
I haven't installed Tiger on an Intel Mac but have installed Jaguar, Panther and Tiger a number of times on PPC Macs. It never took more than 30 minutes to complete.
I would suggest you let the installation run its course and then see how the computer is working.
It might be that your HD needed repairing... did you check it with disk utility before starting the installation ?
One more thing... after the first boot (where you set up accounts,etc) you should boot from the install DVD check the disk with disk utility and repair if necessary.
S -
Question about load external SWF
Hi people!
I've been trying to load an external SWF into my app. I need
to load a Fusion Chart's Gantt Chart, but I didn't achieve.
Fusion Charts are embed using the attached JavaScript code.
How can I load this SWF into my app? Should I use ExternalInterface
to do it?You would need to use SWFLoader, Image or Loader to load your
swf into Flex. To interact with it, you would most likely need to
use SWFLoader/Loader so you could make calls into the SWF. This is
somewhat of an advanced topic and a common question, so you should
be able to find more complete answers if you search the forums for
these. -
Question about Run-Time Shortcut Menus example
I am looking at the Run-Time Shortcut Menus.vi that ships with LabVIEW2011. There is an event case "Test List":Mouse Down that does nothing but generate a Val(Sgnl) event for the "Test List" control if the right mouse button was pressed. There is no value change event for that control.
Is there an obscure reason to do that? One thing I have learned about many of the examples is not to strictly use them as examples.
=====================
LabVIEW 2012
Solved!
Go to Solution.Nevermind - I found the obscure reason. Even though there is not a value change event, generating the value change event is required to change the value on right-click.
At least NI could have documented this in the example
=====================
LabVIEW 2012 -
Question about the Time Capsule as an external hard drive...
i know this might be a kind of dumb question, but does the time capsule also work as an external hard drive where i would be able to just drag and save whichever files i want...or does it only save files through backing up in time machine??? thank you in advance
You don't need to consider FAT32 formatting for PC access.
The closet thing to a "format" of the TC disk is via "erase" command in the Airport Utility. There's no consideration of truly formatting or in what format the disk would be laid out. For the USB attached drive the same applies when it is attached to the TC, but of course it can be formatted when directly attached to a PC or Mac.
It is, in fact, often recommended that a USB attached drive be formatted as HFS+.
The fact that the drive (either the TC drive or a USB attached drive) are accessed via network protocols as a network disk insulates the useing machine from the physical drive format details to a large degree.
I have a TC with a USB attached drive. Both the TC drive and the USB attached drive are formatted as HFS+ but appear on Windows XP machines as:
Type: Network Drive
File system: FAT32
There has been a lot of discussion of this in this forum:
<http://discussions.apple.com/message.jspa?messageID=7540393#7540393>
Message was edited by: Steve Holton
Message was edited by: Steve Holton -
Quick question about using Time Machine on iMac FireWire external
I have been backing up my MacBook using Time Machine via a USB external hard drive that is connected to my iMac. Now when I look at the Time Machine setting in my MacBook is says that the MacBook NEEDS to be plugged in in order for the next backup to occur. This is no issue for me, but I am wondering if this has always been the case. It may have been something that I overlooked, but I do not remember seeing that message when using Time Machine over my network on my MacBook before.
Yes, that's correct. TM will not backup a laptop while it's operating only on battery unless you upgrade to 10.5.3. This latest version provides a TM option to run backups when the computer is on battery power.
It's inadvisable to run a backup while on battery power because if the battery goes dead your backup could become corrupted. At the very least files may not get backed up as expected.
Maybe you are looking for
-
Problems with Adobe Premiere Elements 4.0. HELP?
Hello! I've been trying to edit a short film for weeks now but I have quite a few problems with Premiere Elements 4.0. To start with I have a Windows 7 Toshiba Satellite L750-16L with Intel Pentium. The first and main problem is that I can't import A
-
Writing output to file does not work
Hello All, I have a problem with writing to a file created on the command prompt: 1) my base class is called TestRandom2 2) I have a method called run which runs the print method 3) I passed a reference of the run method into the main below, I don't
-
Coalesce with Cursor in a form?
Hi everyone, I have a problem when i try to use a coalesce method inside a cursor with a 11g form. my select liook like this SELECT c.sendingdate, c.no_evenment, coalesce((select no_action from action_type where no_action = c.no_action), c.no_action)
-
Itune application crashes when launched
After clicking the itunes icon, I get iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
-
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI?
Is it a limitation for BAPI_SLSTRANSACT_CREATEMULTI I am trying to create a Sales Order using a Zprogram. I have used BAPI_SLSTRANSACT_CREATEMULTI. If I give the input as Normal material I am able to generate a sale order. If I give the input as VC m