Question about megaworks 550

Hello there!
My megaworks 550 are connected to the PC via Audigy 2.
When i'm playing music or watching 'stereo decoded' movies in 5.1 (which is of course "not real" 5.1..), the signal of the center is significantly weak compared to other speakers (including rear ones).
Is it normal ? How could i ensure it's not a technical problem?
thank you very much

By the way, should there be any sound coming from center in a case like this ?
(when stereo is duplicated )?

Similar Messages

Question about MegaWorks 250D Speakers

This is weird. I am getting sound from my subwoofers but no sound is coming from the two speakers. Does anyone have any idea what the problem could be? I have an Audigy 2 ZS card.

Mattrc,
Have you try both the Audio Input and 2 on the subwoofer? Do they show the same symptom also? If yes then most likely the speaker is faulty. I would suggest contacting support for services.
http://us.creative.com//support/custsup/
Jason

Megaworks 550 Question/Problem

Hello.
I have recently purchased the Megaworks 550 5.1 system.
From the very beginning when I first turned on the speakers I noticed this abnormal ground noise. The noise persists even if the speakers are disconnected from the PC or the volume is 10. I also tried to change power connection to a different power source but the noise persists.
As this is my first 5.1 PC system, please let me know if it is normal to have this ground noise level in the speakers. It is particularly unpleasant when I listen to low volume music as the noise is only partially covered by the sound and I get a disturbing mix of ground noise and music.
What should I do to verify if this si normal ?
Thanks in advance.

So I looked.
So the only solution would be to change them.
Great!
I should have got the Logitech system instead of waiting months to get a non-hissing system.
I have been a fan of creative for the past 6 years. I am very unhappy I don't trust them anymore now

Hiss, hissing sound in speaker sets like the MegaWorks 550

Over the years, I noticed that my MegaWorks 550 started hissing more and more. For anyone interested, i want to share my quest to find the cause.
First of all, i looked on this forums. There were several useful posts.
http://forums.creative.com/t5/Speake...ion/m-p/169575
http://forums.creative.com/t5/Speake...xed/m-p/184299
Based on these, I mailed customer service for some more information. Their mails were annoyingly useless. On top of that, they actually removed above mentioned posts from their forums! Here's a small summary of the mail conversation with customer support. It's so stupid, that it's actually fun to read:
ME:
Dear Creative, [...] my MegaWorks 550 [...] has a clearly audible hiss. [...] This hiss is also present when no inputs are connected and independent of volume level. The level of hiss is equal on all five sattelite speaker connections, even when objectively measured with an oscilloscope. [...] I know the MegaWorks 550 is farbeyond the warranty, but i am a trained technician and capable of replacing any part. Could you please give a hint as to what causes this hiss? Kind regards [...]
CREATIVE:
[...] To reduce static or buzzing noise from speakers, avoid placing speaker cables next to computer monitors, TV, an AC adapter, or any chargers for MP3 players or cell phones, etc. These devices have a strong field, which may interfere with speakers.
Hissing Sound http://support.creative.com/kb/showa...aspx?sid=64810 [...]
(duh, i already mentioned that it is independent of any inputs and also present with nothing connected)
ME:
[...]Dear Creative, Thank you for your answer. I read the support solution you pointed to, and i also read about eight different threads about this on your forum, suggesting several causes. I've tested the 550 in an electromagnetic Farady cage and with no inputs attached. The hiss remains constant on each of the five outputs and independent of the volume level.
It must be a problem in the electrical circuit. Since this is a very prevalent problem, I hope there's a technician at Creative who know the cause. It would be great if they could explain which capacitors or connections typically need to be replaced or resoldered to remove the hiss.
I'm, of course, very aware that the warranty of the 550 is expired, i would just really appreciate some hints on how to fix it myself. It would be friendly to the environment, to my wallet and to your reputation! [...]
CREATIVE:
If the issue persists after troubleshooting, please be informed that our product have 12 month warranty since the purchase date. Further information on product warranty can be found at:
http://uk.europe.creative.com/suppor...y/warranty.asp
Please note that with most out-of-warranty products, we do not keep stock of parts anymore. You may wish to check with customers on eBay or at other forum sites who may be selling used parts.
If not, in order to assist you, kindly complete the details below:
a) Any previous CRS or RMA that was provided to you before? :
b) First Name:
c) Last Name:
d) Email Address:
e) Company Name (if you are a Creative retailer/reseller or if we are sending the package to your workplace):
f) Street:
g) City:
h) State/Province:
i) Post/Zip code:
j) Country:
k) Phone (Home or Mobile):
Note: For the address provided, please ensure that someone is there between Mon to Fri, 9.30am to 5.30pm to receive the package.
l) Creative Product Serial Number (http://support.creative.com/kb/showa...spx?sid=6843):
m) Date of Purchase (DD/MMM/YYYY: please provide Proof of Purchase and send it as an attachment in your reply to this email):
n) Country where the Creative product was purchased from? :
o) Product Name:
p) Product Colour (if applicable):
q) Issues with the Creative product:
Please verify and make sure that the details filled-in above are correct and complete. RMA would be created provided that your product is still covered by warranty and that you have in possession a copy of the Proof of Purchase. It will also be good if you are able to provide us with a scanned photo of the serial number (S/N) indicated on the Creative product for us to check its validity.
If you have further questions, comments or concerns please include them in your reply. Thank you.

ME:
Dear Creative,
I would expect a €450,- speaker set like the Megaworks 550 to last longer than the three years it did before it started hissing. However, it's beyond the warranty period, so i'm not asking for any official warranty. But surely the least Creative could do, is help me fix it myself.
I just need to know which capacitors to replace to fix it, probably somewhere in the power supply. I know that a lot of sets were sent back because of the issue, so surely there is a technician from Creative that can pinpoint the cause. PLEASE!
CREATIVE:
Thank you for getting back to us.
I'm really sorry but currently we don't provide any out of warranty repairment services.
We're unable to help you in this situation.
If you still require assistance, please reply to this email and include any previous correspondence to ensure a quick response.
ME:
Dear Creative,
I'm not asking for a repair service. I want to fix it myself. I know that a lot of people sent their Megaworks 550 back because of this issue, so there are people within creative who know what causes it. Please, I just need to know which capacitor to replace. I wont contact you after that, even if the repair goes wrong or anything.
CREATIVE:
Thank you for contacting Creative Labs.
We are sorry to inform you that we do not provide schematics, circuit boards, part details or pin-outs for all Creative products to customers. The information you are requesting is considered proprietary and are not allowed to share or release it to the general public, as it would be considered a breach or corporate trade secrets. For your reference every product information and its specification can all be found via the Creative website. http://uk.creative.com/
We apologize if this is not accommodating your need and your cooperation in this regard is appreciated.
So... i opened the case and did some more experiments. I used a variable voltage. The hiss was indeed dependent on the voltage. Since it was not dependent on inputs or volume level and present on all five speaker outputs, i came to the following
CONCLUSIONS:
- the hiss is most likely caused by the final stage of the power supply unit
- specifically: decay of one or more of the 10 capacitors in there
- this is caused by creative using capacitors of a barely sufficient capacity (too cheap). Once they decay the become insufficient.
- communicating with the customer service is a fun, but not very rational process
Perhaps i'll replace the capacitors. If i do, i might share pictures and keep you updated. Please respond if there's anyone out there who would appreciate that.
PS for search purposes: Cambridge SoundWorks megaworks 550 5.1 MegaWorks 550D THX 5.1

MegaWorks 550, doesent work

hello
my megawork 550 stopped to work
i've checked the fuse and its not blown.
i went to school for the day and when i came home it was dead....
(it workt in the morning)
i cant get any power out of it.. the little power "lamp" on the backside of the sub doesent "shine". i've allso tryed to change the power cabel but it didnt help, nether to change power outlet.
please HELP ME
(sry about the english im not so good at that )

I have the same thing and it did the exact same thing. The 550 is a faulty system that creative sells. I had blow on me in 3 months, got an RMA (which they completely messed up) and got a new system. few weeks later BAM blew again, half volume fuse is fine everything just no light on the power thing. Total BS. After getting through all the BS with creative about that they denied me a fix becusae the cage was dented in transit and hushed me saying that they would contact UPS about it and let me know. That was oh...9 months ago? Anyways if you find a shop manual for it email me becuase i want my speakers fixed and god knows creative isn't gonna do it.

Megaworks 550 remote control

Hello all ,
I need remote control for my megaworks 550 , my speakers work so well they are like new
but they are not under guaranteed so i want to buy a new remote control , someone knows
where i can buy one and know about price too ?
Thank you for reply me

ello Vatman,
I have just registered + saw your request 4 the extn cable,I am
looking 4 the same thing. I thought of having the cable cut +
a new cable soldered or joined inbetween but did not really want to
do that until I got another wired remote but they wont supply them (yet?).
I rang Keene Electronics 0870 990 9000 &
they asked for an email [email protected] or a
letter giving as much info as pos preferable with a
photo and measurements. I have not got round to doing that as
yet.Hope this is of some use,let me no if u have got the
cable please(if so how and where) or if u have any joy,
cheers, editman

Megaworks 550 messing up

hi my megaworks 550 is starting to messup it starts "mumbling and stops wolfing" if I bump the sub it starts to work for a bit longer then starts again. Its out of warnty. anyone have any sugestions on how to fix this. it seems to be related to the volume the louder i put it the sooner it starts.

I had this problem with my last set of megaworks 550.. In the beginning it didn't bother me that much. But after a while it became constant.. only "dropping" the subwoofer 5 cm banging it on the floor made it work for a second or two.. I still had warranty so creative sent me a new pair.. I later tried fixing the old ones, with no success, although i i found out something quite interesting..
I opened the sub and looked around all over. I couldn't see anything, but i'm no electrician either.. I gave up but tried again about a year later.. I opened it with the power on (i know you shouldn't but..) and started "pressing" different parts with a tennisball (what i had near me ) the sound became clear and perfect when i was pressing on one of the big black metal-parts... i also noticed a spark after a while when you pressed against the black thingy.. I tried soldering at that point, but couldn't really reach the point where the spark was, and after a few days thinking i would fix it, i managed to solder off a part of the actual card (the thin copper plate on the green card) and now it's completely dead. (no light, no sound.. nothing)
It seemed i was quite close to fixing it, and i'm sure i could get it fixed quite easily at someone who knows a bit more about it than me if i point out what i've learnt.. But right now i can't be bothered. And i already have a working pair so..
Hope this helped..
Oh, and by the way..
http://peksa.tx-shells.net/fel.jpg
http://peksa.tx-shells.net/fel2.jpg (bigger version)
If you look at the picture. the spark was between these two points.. I have no idea what that is or anything but i tried soldering there.. The black thing i was pressing was the thing you can see in the top left corner. If anyone knows what it is, how to fix it i'd be glad as well
/Peksa

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Questions about using Bitlocker without TPM

We currently use Bitlocker to encrypt our Windows 7 computers with TPM. Now we are looking at encrypting some Windows 7 computers without a TPM. I see how to change the group policy setting to allow Bitlocker without a TPM. I have looked at a lot of other
threads and I have a few questions about how the Bitlocker without TPM works.
1) I see a USB drive containing a key is required for Bitlocker configurations without a TPM, say the end user loses this USB drive, what are the recovery options for their computer?
This article seems to indicate that without the USB drive connected, you are unable to even access recovery options http://blogs.technet.com/b/hugofe/archive/2010/10/29/bitlocker-without-tpm.aspx
We have recovery backed up to AD when Bitlocker is enabled, but how could we do this recovery on a computer on computer where it's USB is lost? Would we have to remove the HD itself and attach it to another computer to access?
2) After enabling Bitlocker on a computer without a TPM and using the USB Drive for the key, is there a way to also add a PIN or password protection at bootup?

Hi,
Sorry for my dilatory reply,
Configuring a startup key is another method to enable a higher level of security with the TPM. The startup key is a key stored on a USB flash drive, and the USB flash drive must be inserted every time the computer starts. The startup key is used to provide
another factor of authentication in conjunction with TPM authentication. To use a USB flash drive as a startup key, the USB flash drive must be formatted by using the NTFS, FAT, or FAT32 file system.
You must have a startup key to use BitLocker on a non-TPM computer.
From: http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_Key
For more Q&A about BitLocker, you can refer to the link above.
hope this is helpful.
Roger Lu
TechNet Community Support

Question about megaworks 550

Similar Messages

Maybe you are looking for