Question about parsing delimiter file using import server

I am using import server to load comma delimiter file; but some fields contain comma covered by ", like "1GB, 200HZ", import server parses it into "1GB and 200HZ" two fields and it caused whole import process failed.
The same map and same file works in Import manager. I specified , in delimiter field in port table.
Any idea to solve this issue? Thanks.

hi
Try setting the policy for ur applet
All the Best
Kumar.R

Similar Messages

Question about problem with file using clipping mask

I am using Photoshop CS6. I purchased a digital frame with a clipping mask on Etsy. When I go to insert the picture into the frame using the clipping mask the picture continues to show through the edges of the frame (as shown in the picture). I have tried locking the layer but it doesn't work. Any suggestions?

Try this, move layer 2 below 3 don't clip them.
With the ellipse selection tool drag out a circle that encompasses the area that the image should show
Create a mask for the shape (make sure the shape layer is selected {now layer 2 was 3} click on the icon at the bottom of the layers panel that looks like a circle inside a square)
You should now see your image.
If you are stuck, capture your screen to show your progress.
Tips for the selection tool:
You can hold down the shift key to constrain to a circle,
You can hold down the alt key to draw a circle selection from its center,
You can hold down both modifier key for a perfect circle drawn from center.
Finally you can hold down the space bar to move the selection before letting go of the mouse button.

Question about making PDF files expirable using contnet manager

Hello
I would like to know if I enable users of my website to view PDF files online can I make the PDF files using Content Server to expire once the user logs off from my website and his session end?
Thanks
Yoav

That's a fairly general question. Have you read the basic white paper on the product site: http://www.adobe.com/products/contentserver/ ?

Acquire data from a tab delimited file using a popup dialog object on a stamp

I am trying to import data from a tab delimited file using a popup dialog object on a stamp. I have purchased the book by Thom Parker--All About PDF Stamps in Acrobat and Paperless Workflows and have been working through the examples in the appendix.
My problem is understanding how to bring the data into the dialog object from the file.
I don't want to plagiarize his book--so am electing at this time not to show my code. The script is reading the file, just not bringing in the records from the file so that I can select which line to import into the stamp.
I have typed in the code exactly how the book describes, but when the popup dialog object is selected, there is nothing in the drop-down. When I click OK, the first record is put on the stamp--except for the fields that I am wanting to appear in the dialog object popup box.
I have searched the forums, and also the JavaScript reference. There are examples of the popup dialog object, but none of them show how to import the data from a file--just for the items to be typed in as the list.
Any help would be greatly appreciated! i have been trying to work on this for several months now.

Karl
Thank you for getting back with me!
In answer to your questions:
1. Your trusted function is not a trusted function. Did you put this
function into a folder level script so that it will get executed at system
startup?--
yes--I saved the script as a .js file and put it in the following path (I have Acrobat XI Pro for Windows)
C:\Documents and Settings\tjohnson\Application Data\Adobe\Acrobat\Privileged\11.0\JavaScripts\GetTabData.js
2. The script cannot find your tab delimited data file, or it cannot
extract the data. Did you add the data file in the correct location? The
location from the script in the book would be c:\mydata\Contacts.txt
Yes--the file is in the same path as the book.
Below is my code that references the file.
var cPath = "/c/mydata/Contacts.txt";
the slashes in the book go in the direction of the text above--should they go in the direction that you have in your question?
Also, the name and email address need to be separated by one Tab character.
They are.
3. The fields need to be named the same way as the columns in the data file (the two names are in the first line of the file).
My headings are RevByFromTab and EmailFromTab--which match the names of the two fields on the stamp.
So, check that you are not getting any errors in the JavaScript console
(Ctrl-J or Cmd-J), and verify that the tab delimited file is in the correct
location
When I run in the java script console--and I just run the script on the stamp,
it says
TypeError: event.source is null
17:Console:Exec
undefined
When I place the stamp on the page, the popup box is working, but when you click on the down arrow, there is nothing listed. When I click OK, the RevByFromTab is populated by the first item in the file, but the EmailFromTab field says undefined.
Thank you
Message was edited by: tdjohnson7700

Tab delimited file on app server. How to do that?

Hello,
When i transfer a tab delimited file from pre. server(windows) to app. server(windows) using CG3Z , the tab delimitation is not working.
for eg : the file with below layout
01.04.2007     31.03.2008     1     120
01.05.2007     31.07.2008     2     140
is getting changed like
01.04.2007#31.03.2008#1#120
01.05.2007#31.07.2008#2#140
All i need is a tab delimited file in app server also . Wats that i need to do for this ? Also how can i write a tab delimited file on app server through my program using open dataset.
Thanks for ur time.
Jeeva.

Hi..
Check this code: you will find the solution:
Using the Static Attribute <b>CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB</b>
Example:
This is the Simple way you can download the ITAB with Tab delimiter:
DATA : V_REC(200).
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT ITAB INTO WA.
Concatenate WA-FIELD1 WA-FIELD2
         INTO V_REC
         SEPARATED BY CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
TRANSFER V_REC TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.
Note: if there are any Numeric fields ( Type I, P, F) In your ITAB then before CONCATENATE you have to Move them to Char fields ..
Reward if Helpful.
Example:
DATA: V_RECORD(200).
OPEN DATASET P_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
DO.
READ DATASET P_FILE INTO V_RECORD.
IF SY-SUBRC NE 0.
    EXIT.
ENDIF.
SPLIT V_Record at CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                            INTO WA-FIELD1 WA-FIELD2.
APPEND WA TO ITAB.
ENDDO.
<b>reward if Helpful.</b>

Generating tab delimited file on presentation server

Hi All,
I have to generate a tab delimited file on presentation server. The file shouldn't have '#' as separator. Instead it should be separated by TAB (when you press TAB button, some spaces will come naa... like that) ' '. Please advice me how to do this...
Thanks in Advance,
Regards,
Phani

Hi,
Check this example..
DATA: BEGIN OF itab OCCURS 0,
matnr TYPE matnr,
werks TYPE werks_d,
END OF itab.
itab-matnr = 'ABC'.
itab-werks = 'ASDF'.
APPEND itab.
itab-matnr = 'EFG'.
itab-werks = 'DHIS'.
APPEND itab.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\test.txt'
write_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE s208(00) WITH 'File downloaded'.
ENDIF.
Thanks,
Naren

Tab Delimited File Using Receiver FCC

Hi Experts,
I need to generate a Tab Delimited File Using Receiver FCC. I have achieved the same by copying the tab length from a notepad and used the same in name.fieldSeparator parameter.
The other below mentioned values for name.fieldSeparator didnu2019t produce the expected result:
name.fieldSeparator=u2019htu2019
name.fieldSeparator=u2019\tu2019
name.fieldSeparator=u2019 0x09u2019
So just need to know if my approach for achieving this is fine or not.
Thanking you in advance.
Aditya.

Verma,
name.fieldSeparator=u2019 0x09u2019
I see a space after the first comma. Try removing it and give a try.
'0x09' with no spaces.
Regards,
---Satish

Question about parsing parameters through url

Hello,
I have some questions about parsing parameters through a url.
What I want to build is a page with some text fields and maybe one drop down list. After user enter values into the text fields and select one option in the drop down list, then press the submit button, a report will be opened, which according to the parameters parsed.
These were what I have done:
1. create a blank page and a region
2. create one text field in the region, the name is FIRSTNAME
3. create one hidden items FN, of which the source value is item FIRSTNAME
4. create a process. the type is "Set Preference to value of Item" which set PN with the value of FIRSTNAME when the page submitted
5. create a button "Submit Page and Redirect to URL", in the URL I entered:
http://dianti.local.net:9704/xmlpserver/~shichao/GuestFolder/orderdetail/orderdetail.xdo?_xpf=&_xpt=0&_xdo=%2F~shichao%2FGuestFolder%2Forderdetail%2Forderdetail.xdo&FIRSTNAME=&FN.&_xt=orderdetail&_xf=pdf&_xmode=4
My problem is: it seems working for the first time after I entered a value in the FIRSTNAME text field and press submit button, but when I come back to the page (the report was opened in the same page, wondering how to open it in a new window?), the value is saved in the text field and after I enter another value and submit the page again. It still parse the old value to the report. The value of the parameter doesn't change.
What's the reason? and is this the correct way to build what I want?
Thank you in advance.
Best Regards,
Shichao

Hi Scott,
Thank you again for the help.
But this didn't answer my question exactly. I have tested what you created and the problem remains. When I first time enter a value in the text field and press the button, it goes to page 2, but the parameter didn't parsed. When I go back to page 1 and then click the button again. After that I can see the value I parsed on page 2. Same thing happens when I try to enter a new value. So which means the button has to been pressed twice to parse the parameter.
Due to the limitation of my knowledge of Apex. I don't know how to fix it. Could you please help me again and hope you understand what the problem is. Thank you very much.
Shichao

Parsing .xfdl file using c#

Hello All,
I am developing app using c#. Can any one please help me how can I parsing .xfdl file using c#? Actually I want to read value from .xfdl file and show. how can I do this please help me.
ThanQ
Ganesh

Hello All,
I am developing app using c#. Can any one please help me how can I parsing .xfdl file using c#? Actually I want to read value from .xfdl file and show. how can I do this please help me.
ThanQ
Ganesh
You'd better connect IBM for how to read xfdl file.
remember make the reply as answer and vote the reply as helpful if it helps.

Import text into a form from a tab delimited file using an action

Good evening.
I am using Adobe Acrobat XI Pro
I have been working all weekend so far on this, and have tried many options.
What I am wanting is to import a line of data from an excel file into a form, save the file with a name drived from the form fields, close the new file, then go back to the original file, import a line of data, and so on and so on.
I had all of this working in livecyle with a tool, but now that we are going to Windows 8 and Microsoft Office 2013, the driver that I need to load the excel file into the form is not available--so now I have to redo the forms in Adobe and import using a tab delimited file.
I would like to do this with an action.
Thus far, I have the following.
**Credit goes to George Johnson who helped me with the script to save the file using field names a few months ago**
To start, I have a folder level script
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
//privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc, path);
app.endPriv
//Privileged and/or non-privileged code below
For the Action, I start with the Form file loaded
Then I execute a javascript to import the text into the file.
this.importTextData("/c/data/clerical.txt");
The next step is to save the file using field names as part of the file name
--credit goes to George Johnson who assisted me with this on a similar project a few months ago.
//Get the Field Value
var fn=getField("Last").valueAsString + "-" + getField("First").valueAsString;
//Specify the folder
var fldr = "/c/data/";
//Determine the full path
var fp=fldr + fn + ".pdf";
//save the file
myTrustedSpecialTaskFunc(this, fp);
That is as far as I have gotten.
What I want to do now is load the original form file, import the next line into the form, save the file, repeat.
If anyone could assist me, I would greatly appreciate it.
**note I had to type this from my I-pad because I kept getting kicked off the internet from my computer. I hope my code is typed correctly.

George
Thank you so much for your response.
Yes--there are multiple lines in the data file--it will vary from month to month. It looks like from what you are saying is that I need to do the global variable since it will constantly change, and then increment it as it goes through the text file. When it reaches the end, then it will stop.
I looked at the following links--but this is from Adobe 9 API--I don't know if things have changed with XI--especially since 9 used batch processing and XI has actions.
Count PDF Files
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
Global counter
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
I am not exactly sure how to include this in my code.
If you could point me in the right direction, I would appreciate it.

Import multiple files using sql server management studio

Using sql server management studio I want to do 2 things.
- Import all txt files from a directory as tables into my DB.
- Add an additional field to each new table which contains the table name.
Can anyone help me?

There are couple of ways to do it:
File naming conventions : YourFileName_SystemId.txt
You can create one extra column in table or may be name a table with system id. Then after loading the data you can update that column with the system id.
components required:
ForEachLoopContainer - To get file and store file name in a variable
Expression Task (if SSIS 2012 or above) or variable expression or script task to seperate file name from systemId
Data Flow Task - to load data
Execute SQL Task - to update last column or specific table based on precedence constraints
Note: You can also add extra column in data flow via
derived column transformation.
Ex.:
Load file via foreach loop
Split string via seprator
2: Loading different system file in different folder
you can have predefined folder structure ex: SystemId1, SyetemId2 etc and can download respective txt file in their system folder. Then you can easily identity which file belong to which system and then load it to the respective table.
3: Use first row of text file to hold the system value
Use first row to have the system id and then skip row while fetching data.
Note: Then you have to read first row through script task to get the system id.
hope this will help

Question about calling batch file by using the System Exec+.vi?

Hi
I have a problem about calling batch file. I know that the system exec is equivalent to "run" in Windows. I called the batch file c:\rtxdos\bs\ch0.bat successfully in the "run" but it didn't work in the LabVIEW program. The dos prompt had an error message "Bad command or file name" and it just happen when I call this batch file in LabVIEW. Why?
Bill.

Hi,
Try to set the "working directory" parameter of System exec.vi to the directory where the batch file is located. It may help.
Good luck.
Oleg Chutko.

Reading tab delimited file from application server

Hi All,
I do know that we need to use Open data set to read a file from application server, but my question is when you use read DATASET v_file into wa_final - this wa_final is an work area and also i have mentione an internal table. so do we need to Split the record at tab into the corresponding fields. Append the records into an internal table i_input.????
Please let me know on this....
thanks in advance....
Poonam....

Hi,
first see the file contents in application server, how the contents whether the contents seperated by any symbol or not, if the contents seperated by any symbol then you have to split the data before appending to internal table.
check this code.
DATA: l_data_string TYPE string.
filename = p_file.
OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
    DO.
      READ DATASET filename INTO l_data_string.
      IF sy-subrc NE 0.
        EXIT.
      ENDIF.
      CLEAR k_input.
      SPLIT l_data_string AT '#' INTO k_input-agreement k_input-suffix k_input-status
            k_input-first_name k_input-last_name k_input-job_title k_input-tel k_input-fax k_input-email_address k_input-mob_number.
      APPEND k_input TO i_input.
    ENDDO.
ENDIF.
Regards,
Venu

Read Tab delimited File from Application server

Hi Experts,
I am facing problem while reading file from Application server.
File in Application server is stored as follows, The below file is a tab delimited file.
##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1###S#O#R#T#2###N#A#M#E#_#C#O###S#T#R#_#S#U#P#P#L#1###S#T#R#_#S#U#P#P#L#2###S#T#R#E#E#T###H#O#U#S#E#_#N#U#M#1
i have downloaded this file from Application server using Transaction CG3Y. the Downloaded file is a tab delimited file and i could not see "#' in the file,
The code is as Below.
c_split TYPE abap_char1 VALUE cl_abap_char_utilities=>horizontal_tab.
here i am using IGNORING CONVERSION ERRORS in order to avoid Conversion Error Short Dump.
OPEN DATASET wa_filename-file FOR INPUT IN TEXT MODE ENCODING DEFAULT IGNORING CONVERSION ERRORS.
      IF sy-subrc = 0.
        WRITE : /,'...Processing file - ', wa_filename-file.
       DO.
      Read the contents of file
          READ DATASET wa_filename-file INTO wa_file-data.
          IF sy-subrc = 0.
            SPLIT wa_file-data AT c_split INTO wa_adrc_2-kunnr
                                               wa_adrc_2-title
                                               wa_adrc_2-name1
                                               wa_adrc_2-name2
                                               wa_adrc_2-name3
                                               wa_adrc_2-name4
                                               wa_adrc_2-name_co
                                               wa_adrc_2-city1
                                               wa_adrc_2-city2
                                               wa_adrc_2-regiogroup
                                               wa_adrc_2-post_code1
                                               wa_adrc_2-post_code2
                                               wa_adrc_2-po_box
                                               wa_adrc_2-po_box_loc
                                               wa_adrc_2-transpzone
                                               wa_adrc_2-street
                                               wa_adrc_2-house_num1
                                               wa_adrc_2-house_num2
                                               wa_adrc_2-str_suppl1
                                               wa_adrc_2-str_suppl2
                                               wa_adrc_2-country
                                               wa_adrc_2-langu
                                               wa_adrc_2-region
                                               wa_adrc_2-sort1
                                               wa_adrc_2-sort2
                                               wa_adrc_2-deflt_comm
                                               wa_adrc_2-tel_number
                                               wa_adrc_2-tel_extens
                                               wa_adrc_2-fax_number
                                               wa_adrc_2-fax_extens
                                               wa_adrc_2-taxjurcode.
WA_FILE-DATA is having below values
##K#U#N#N#R###T#I#T#L#E###N#A#M#E#1###N#A#M#E#2###N#A#M#E#3###N#A#M#E#4###S#O#R#T#1###S#O#R#T#2###N#A#M#E#_#C#O###S#T#R#_#S#U#P#P#L#1###S#T#R#_#S#U#P#P#L#2###S#T#R#E#E#T###H#O#U#S#E#_#N#U#M#1
And this is split by tab delimited and moved to other variables as shown above.
Please guide me how to read the contents without "#' from the file.
I have tried all possible ways and unable to get solution.
Thanks,
Shrikanth

Hi ,
In ECC 6 if all the unicode patches are applied then UTF 16 will defintly work..
More over i would suggest you to ist replace # with some other * or , and then try to see in debugging if any further # appears..
and no # appears then try to split now.
if even now the # appears after replace statement then try to find out what exactly is it... wheather it is a horizantal tab etc....
and then again try to replace it and then split..
Please follow the process untill all the # are replaced...
This should work for you..
Let me know if you further face any issue...
Regards
Satish Boguda

Parsing XML files from application server

I need to read an XML file from the application server. This can be done using OPEN DATASET in BINARY MODE and reading into internal table of type binary data.
But inorder to parse the document using the iXML library, i need to pass the filesize of the XML file that is read into internal table.
Please let me know how to calculate this filesize ?

Hi ,
Check the FM : /SAPDMC/LSM_F4_SERVER_FILE.
Inside this FM , subroutine below exists.The main program for routine is /SAPDMC/LLSMW_AUX_020F02.
Call this routine from your program. You will get the length in bytes from the field len of table pt_file.
data:
begin of gs_file,
    directory(75) type c,              " name of directory.
                                       " (possibly truncated.)
    name(75)    type c,                " name of entry.
                                       " (possibly truncated.)
    type(10)    type c,                " type of entry: directory, file
    *len(8)      type p,                " length in bytes*
    owner(8)    type c,                " owner of the entry
    mtime(6)    type p,                " last modification date,
                                       " seconds since 1970
    mode(9)     type c,                " like "rwx-r-x--x":
                                       " protection mode
    errno(3)    type c,
    errmsg(40) type c,
    mod_date    type d,
    mod_time(8) type c,                " hh:mm:ss
    subrc like sy-subrc,
end of gs_file.
DATA : pt_file LIKE TABLE OF gs_file.
DATa : p_ok.
PERFORM /sapdmc/llsmw_aux_020f02(directory_contents_get)
TABLES   pt_file
                            USING    '/TMP' ""!!! Here is your filepath
                            CHANGING p_ok

Question about parsing delimiter file using import server

Similar Messages

Maybe you are looking for