Unable to resolve the domain

The app server is:
Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs)
I'm running:
Sun Convergence 1.0-14.01 (built June 9 2010 - 23:49:24)
Sun Java(tm) System Messaging Server 7u3-17.01 64bit (built Jun 8 2010)
Sun Java(tm) System Calendar Server 6.3-19.01 (built Aug 26 2009)
Sun IM - 8u2-02.04
This is in the iwc.log:
AUTH: ERROR from com.sun.comms.client.security.auth.modules.impl.SunAuthCallBack  Thread httpSSLWorkerThread-443-1 at 2010-08-18 17:31:53,397 - Unable to resolve the domain school.edu  Failed. could not find:school.edu under o=schoolThe base dn is o=school
under this is o=school.edu
under this is People, etc.
The directory is a replica of our production dir - and runs on our testmail.school.edu box along with all (or most) of Comms Suite 7. Accounts have addresses like [email protected] I have used testmail.school.edu as the default domain in the configuration steps for each application.
If I add an associatedDomain with the value "school.edu" for o=school.edu (under o=school) in addition to the existing sunPreferredDomain and associatedDomain values which are testmail.school.edu, the error goes away - but IM doesn't work unless I login with a uid like "[email protected]" instead of just "me".
If I do not have an associatedDomain of "school.edu" for o=school.edu (under o=school), I can login with uid me - and everything works - but that error is there.
Thanks,
s7

shjorth wrote:
starman7 wrote:
What is the URL used to access the Convergence instance e.g. http://testmail.school.edu/iwc?
Yes /iwc - and then it redirects to: /iwc_static/layout/login.html?lang=en-us&14.01_234924&svcs=abs,im,mail,calendarWhat is the entire URL?testmail.school.edu
which redirects to:
https://testmail.school.edu/iwc
which ends up here:
It's https://testmail.school.edu/iwc_static/layout/login.html?lang=en-us&14.01_234924&svcs=abs,im,mail,calendar
>
me@x1$ /opt/sun/comms/messaging64/sbin/imsimta test -domain
DOMAIN_MAP> verify
%DMAP-E-DOMAINMULTDEF, Domain 'testmail.school.edu' multiply defined by entries with DNs 'o=school.edu,o=school' and 'o=school.edu,o=school'Have you set both "sunPreferredDomain: testmail.school.edu" and "associatedDomain: testmail.school.edu" on the "dn: o=school.edu,o=school" entry?Yes. assocatedDomain of school.edu might not have been set when I ran the imsimta test domain.
>
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=business,o=school' does not have a domain name
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=ESGDomainsRoot,o=business,o=school' does not have a domain name
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=VISDomainsRoot,o=business,o=school' does not have a domain name
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=SharedDomainsRoot,o=business,o=school' does not have a domain name
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=ESG,o=siroe.com,o=SharedDomainsRoot,o=business,o=school' does not have a domain name
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=VIS,o=siroe.com,o=SharedDomainsRoot,o=business,o=school' does not have a domain name
%DMAP-E-NODOMAINNAME, Domain entry with DN 'o=DEF,o=VIS,o=siroe.com,o=SharedDomainsRoot,o=business,o=school' does not have a domain nameThe above entries appear to be those added by Delegated Administrator when you select "add sample domain" during configuration.
iim.policy.modules = "iim_ldap_schema2"
iim_ldap.schema2.domain_config_root = "o=school" ( - should that be o=school.edu,o=school - ?)"o=school" is correct.
What do you have configured for "default.domains" in the Convergence httpbind.conf file (i.e. the one in /opt/sun/comms/iwc/config)?I have:
default.domains=testmail.school.edu
When you added "associatedDomain: school.edu" to the "dn: o=school.edu,o=school" entry and logged in with "uid" only, you were actually logged in as "[email protected]".
Since you don't have school.edu in the default.domains setting above, IM didn't work.
So in this scenario you would need to set:
default.domains=testmail.school.edu school.edu
I tried this while having the school.edu as an associtedDomain to: dn: o=school.edu, o=school and while it worked I saw different errors -
AUTH: ERROR from com.sun.comms.client.security.sso.impl.SunBaseIdentitySSOProvider  Thread httpSSLWorkerThread-443-6 at 2010-08-21 10:35:08,239 - Exception while performing SSO against OpenSSO AQIC5wM2LY4Sfcxkv948H6xWMQstUSYrTMc8WxxfpnKkdJQ.*AAJTSQACMDMAAlNLAAk5OTM0MTM5MzIAAlMxAAIwMQ..* Session was not obtained.
AUTH: ERROR from com.sun.comms.client.web.sso.SSOFilter  Thread httpSSLWorkerThread-443-6 at 2010-08-21 10:35:08,241 - Exception while performing Sigle Sign On com.iplanet.sso.SSOException: AQIC5wM2LY4Sfcxkv948H6xWMQstUSYrTMc8WxxfpnKkdJQ.*AAJTSQACMDMAAlNLAAk5OTM0MTM5MzIAAlMxAAIwMQ..* Session was not obtained.
AUTH: ERROR from com.sun.comms.client.security.sso.impl.SunBaseIdentitySSOProvider  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:35,826 - Exception while performing SSO against OpenSSO AQIC5wM2LY4Sfcxkv948H6xWMQstUSYrTMc8WxxfpnKkdJQ.*AAJTSQACMDMAAlNLAAk5OTM0MTM5MzIAAlMxAAIwMQ..* Session was not obtained.
AUTH: ERROR from com.sun.comms.client.web.sso.SSOFilter  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:35,831 - Exception while performing Sigle Sign On com.iplanet.sso.SSOException: AQIC5wM2LY4Sfcxkv948H6xWMQstUSYrTMc8WxxfpnKkdJQ.*AAJTSQACMDMAAlNLAAk5OTM0MTM5MzIAAlMxAAIwMQ..* Session was not obtained.
AUTH: WARN from com.sun.comms.client.protocol.delegate.agent.LoginContextAgent  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:35,874 - Subject not found in session, creating one
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunAuthCallBack  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:35,945 - User LoginID is me123
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunAuthCallBack  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:36,089 - User domain is school.edu
AUTH: INFO from com.sun.comms.client.security.auth.modules.impl.SunBaseIdentityLoginModule  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:36,498 - UserName: me123  Login success!!
AUTH: INFO from com.sun.comms.client.security.auth.CommsUserInitContext  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:36,639 - Loading user entry from LDAP
AUTH: INFO from com.sun.comms.client.security.auth.CommsUserInitContext  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:36,855 - User entry loaded successfully
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.agent.ClientOptionsAgent  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:37,134 - No domain found for Domain name  testmail.school.edu
AUTH: INFO from com.sun.comms.client.web.IwcCookieManager  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:37,139 - Preferred language for user is en
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.UserPrefsCommandDelegate  Thread httpSSLWorkerThread-443-4 at 2010-08-21 10:35:39,011 - get_allprefs.iwc : Service is not enabled : smime
PROTOCOL: WARN from com.sun.comms.client.protocol.delegate.agent.ClientOptionsAgent  Thread httpSSLWorkerThread-443-4 at 2010-08-21 10:35:39,048 - client preferences not found for domain: school.edu
PROXY_MAIL: INFO from com.sun.comms.client.web.services.sun.MailServiceProxy  Thread httpSSLWorkerThread-443-0 at 2010-08-21 10:35:40,682 - Performing Sun Mail Authentication
ADDRESS_BOOK: INFO from com.sun.comms.client.ab.coresrv.DBHandler  Thread httpSSLWorkerThread-443-3 at 2010-08-21 10:35:41,667 - Got DBPluginMap so will go back to one default.domains (dropping school.edu) and no school.edu associateDomain for dn: o=school.edu, o=school.
Is there a way I can login w/ uid only, and not need that school.edu associatedDomain, and not see either error in the log?
I also see this:
AUTH: ERROR from com.sun.comms.client.web.sso.SSOFilter  Thread pool-1-thread-3 at 2010-08-21 10:53:55,032 - Error obtaining Admin Password. Input length must be multiple of 8 when decrypting with padded cipher
Regards,
Shane.

Similar Messages

  • I am unable to update software or backup my devices. Apple techs unable to resolve the issue after hours of phone support over the course of several months.

    I am unable to update software, transfer purchases, sync, or backup any of my 3 devices. I have tried using iTunes on other computers, uninstalling iTunes with tech support walking me through, using a different user on my computer, deleting photos off of my devices, using an ethernet cable instead of connecting with wifi, uninstalling my antivirus software and firewall, and had my laptop examined by several techs who all determined there was nothing wrong with the laptop that explains what has been going on. I am also unable to view or download purchases on iTunes.  Clicking the Itunes store results in a blank white screen. I get various error messages, including -9886. Apple techs and now the engineers have been unable to resolve the issues thus far, even after several hours of phone support over the course of several months (about 5 hours this month alone). I have done everything they've suggested, even when they've suggested I do something over again, and I'm becoming frustrated. I would greatly appreciate any advice you can offer. Thank you in advance for your time.

    Hi there
    Sorry for hijacking your thread as put by Dahveed. However I have resolved my issue so I thought I'll share it with the rest of you.
    I checked for the error 3194 in youtube and I found some good videos that tell you how to resolve the problem. The issue I was facing was the actually (I know because I have resolved it now) the communication between my computer and apple server which can be fixed as following (if you are using windows):
    There is file in following directory:
    C:\Windows/system32/drivers/etc/hosts
    The file normally has no extension and it is in file format. You need to open it and make sure that every line that has apple server id starts with "#". In my case one of the line started directly with the ip address and then gs.apple.com.
    Perform your restore/update after that and hopefully it should be resolved (mine did).
    Cheers

  • [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.

    Hi Experts,
    When I use Agent functionality to send email in BIEE 11.1.1.7.0, it will generate the following error message as below:  Are you facing the same problem ? Please help me,Thanks very much.
    Global Error: [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.
    Error Codes: AXSBMN8D:
    The operation completed successfully.

    Can you try doing telnet to SMTP server from where BI server is installed and let us know the outcome.Just want to check if any firewall is blocking
    telnet hostname portnumber
    Thanks,

  • Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.

    Hi
    I am trying to set up an Azure RemoteApp Hybrid solution.
    I have created RemoteApp net and uploaded a custom image and all that is fine.
    When I link my template to my Collection it fails after provisioning for about an hour.
    I recive the following message: Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
    The join domin works fine and I have tryed with account with different lvl of access to my AD.
    Any suggestion how to solve this?

    Hello Eric,
       I am landing into the same Problem and i read your guidance on this issue. Let me answer it point by point. 
    1. Check the VPN state to ensure it is active or connected state:
    Sundesh:My Azure RemoteApp Virtual Network after successfull S2S configuration shows as Ready. Is that what you mean by Connected State? Earlier to S2S, it was just under connecting state.
    2. Verify your VNET configurations have proper IP address ranges
    Sundesh: The VNET address range, the Local address range and DNS has already been verified twice. In fact the same address ranges(with exception to VNET) are working fine on a VENT config on Azure VM instance. Verified.
    3. Verify your DNS IP configurations are valid, (often this is the problem)
    Sundesh: Yes its done and verified
    4. Verify the credentials entered for domain join are valid.
    Sundesh: Tested these credentials by joining a regular Azure VM to domain and it works there.
    5. Make sure your VPN endpoint that Azure RemoteApp service is connecting to is not blocking traffic.
    Sundesh: Can you please let us know the specific port numbers that we need to consider and i can have it checked with the Network team
    Thanks
    SUndesh

  • I'm unable to use the domain with a .uk domain suffix with 2012 essentials

    I'm trying to link a domain I wish to use in office 365 to the essentials server but I receive "The domain name is not valid"when going through the "link domain to Office365" wizard, I also receive the same error when running through
    the anywhere access wizard, but I expect fixing one would fix the other.
    The domain in question is using the .uk domain which is a fairly new TLD
    I have tried the solution proposed here:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/681176de-ae82-4689-a2a1-923895ba6389/anywhere-access-domain-ltduk-causes-the-domain-name-is-not-valid-error?forum=winserveressentials 
    But I then get the error "Unable to check for domain" when running either wizard
    Any one have any ideas on this?

    My advice would be to use the free *.remotwebaccess.com domain name with the RWA wizard, and then setup a forwarder on your custom domain to the RWA page.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Ix4-300d - unable to joint the domain

    Unfortunately when I came into work today, our ix4-300d wasn't allowing us to get into the web interface(attempted after we noticed that our nightly backups wasn't completed successfully the last 2-3 nights). Lenovo's tech support had us do a factory reset on the device and then we were asked to update the firmware on the unit to 4.1.108.32627.
    Now I'm unable to connect us back to AD to reset all of the permissions for everything. The unit doesn't seem able to sync with the NPT server which is also the DC, DNS, DHCP, and file server. I had the correct IP address in for the time server but I turned it back on auto detect since the unit was giving me a sync error. I had also changed one of the two NIC within the Network interface to the same IP, subnet, and Gateway it had prior to this issue. I left the other NIC set to auto to ensure I could still get in the web interface. When I ping the IP I received from the auto-generated IP, I get a successful ping, but when I ping the IP address that was manually set, it Times out.  At one point I had both NICs set to auto so it could just grab an available IP from the DNS and pinged the name FQDN of the device, it was still trying to ping the old IP address.
     should state that the one that had originally set this all up has left the company and they stuck me on this assignement since I was/am "the most qualified" to get it fixed. Any assistance you can provide would be appreciated.
    Unfortunately tech support cut our conversation short because they are stating that I never registered my product(which is a bit unlikely knowing the one that set this up) and this apparently cut our waaranty down to a 1/3 of the time that was advertised. Little upset with that aspect of the situation to say the least, but I'm hoping this community could assist where the Lenovo techs couldn't..

    Hello Phenix51
    Sorry that you are having issues configuring the unit.  Regarding the warranty status, if the device is showing up as having an expired warranty we can still provide assistance via email and forums.  If the status is incorrect, the lenovo registration team should be contacted from emails here.
    Regarding the issue you are experiencing,  please double check that the steps for connecting the unit to Active Directory are being followed, search for "Configuring Your ix4-300d Network Storage to Use Active Directory" in the updated user manual for the ix4-300d.
    If you are still unable to connect the unit to the domain, please double check your network configuration's from before the firmware update are still valid.   An email should have been sent out to you after the call with support,  use that to send a email reply with logs, screen shots, etc that could help with narrowing down what the issue is.  
    If you could also PM me your incident number I could keep watch on it for updates from you. 
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Unable to resolve the classpath error in Web Dynpro DC

    Hi,
    While building a new Web Dynpro DC we got the following build errors:
    The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.security.api.IUser. Fix the classpath then try rebuilding this project. ND1_MTRACK_DTrvlMgmtmindtree.com     
    We have already added the external jar files by following the steps mentioned in this blog /people/marion.schlotte/blog/2007/12/19/simplify-dc-structures-for-external-libraries
    The respective dependancy of the J2EE library dc was added to the WD component but the issue still persists.
    Please help us in resolving this error.
    Best Regards
    Gaurang

    Hi Gaurang,
    Were you able to resolve your issue?
    Hope the following links help:
    /message/7579461#7579461 [original link is broken]
    Re: Required JAR files:
    Regards,
    Dao

  • Error: Could not join the domain. Unable to reach the domain.

    Hi, I'm trying to setup a demo environment. I guess VPN is working fine because i can see traffic. And also DNS. I even tried using a domain administrator account, so there is no problem with the account.
    When i first created a app collection the wizard complained about using domain.local so i tried domain.com and it worked. Later i want to change back to domain.local because domain.com is only a domain suffix and not my real domainname.
    Any tips and tricks I can check to get this working?

    Well... This was embarrassing. A typo in the network config. Problem solved.

  • When I try to connect to wireless internet, I get Error-105, "Unable to resolve the server's DNS address". I've tried everything from resetting including a full software update and nothing has fixed it. What should I do?

    I've tried resetting the router, resetting my airport on my laptop, unplugging the router, restarting my computer, updating all my software (including from snow leopard to mountain lion) replacing the dns ip address, and restarting the browsers. It won't let me use wi-fi on any of the browsers (chrome, firefox, safari), but will allow me to use internet through the ethernet cable.
    This happened earlier today when for my job I tried to clear some expired certificates and I removed the expired ones that were on my firefox (I now use chrome) and the internet crashed soon afterwards. While I was deleting the certificates, I also got the "blue screen of death" sort of thing that popped up and shut my computer down.
    I have no idea what to do and my laptop is no longer under warranty. Can anybody help me?

    Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
    Write down the server addresses.
    Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
    8.8.8.8
    8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
    2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • Unable to resolve the exception  READ_REPORT_LINE_TOO_LONG in Abap program.

    Hi,
      I am getting the exception READ_REPORT_LINE_TOO_LONG in my abap program.Given below is the full analysis of the exception and then the program code :-
    Error Analysis :-
      An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
      not caught in
    procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
      RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    There was an attempt to read program "ZANI_TEST_INTERACTIVE_ALV" from the
      database.
    The READ REPORT statement allows you to copy a program text into an
    internal table. The occupied line length in the program text must not
    exceed the width of the internal table.
    The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
      characters wide. The program line is
    91 characters wide.
    Program Code :-
    *& Report  ZANI_TEST_INTERACTIVE_ALV
    REPORT  ZANI_TEST_INTERACTIVE_ALV.
    TABLES: LFA1.
    TYPE-POOLS: slis.
    DATA: it_lfa1 TYPE TABLE OF lfa1,
          wa_lfa1 TYPE lfa1,
          it_fieldcat TYPE slis_t_fieldcat_alv.
    SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE input.
      SELECT-OPTIONS: acc_no FOR LFA1-LIFNR.
    SELECTION-SCREEN END OF BLOCK input.
    START-OF-SELECTION.
      IF NOT acc_no IS INITIAL.
        SELECT * FROM LFA1
          INTO CORRESPONDING FIELDS OF TABLE it_lfa1
          WHERE LIFNR IN acc_no.
      ELSE.
        SELECT * FROM LFA1
          INTO CORRESPONDING FIELDS OF TABLE it_lfa1.
      ENDIF.
      PERFORM form_build_fieldcatalog USING 'IT_LFA1' CHANGING it_fieldcat.
      PERFORM form_display_alv USING it_lfa1 it_fieldcat.
    *&      Form  form_build_fieldcatalog
          text
         -->P_0058   text
         <--P_IT_FIELDCAT  text
    form form_build_fieldcatalog  using    p_it_tabname TYPE slis_tabname
                                  changing p_it_fieldcat TYPE slis_t_fieldcat_alv.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          I_PROGRAM_NAME               = sy-repid
          I_INTERNAL_TABNAME           = p_it_tabname
        I_STRUCTURE_NAME             =
        I_CLIENT_NEVER_DISPLAY       = 'X'
          I_INCLNAME                   = sy-repid
        I_BYPASSING_BUFFER           =
        I_BUFFER_ACTIVE              =
        CHANGING
          ct_fieldcat                  = p_it_fieldcat
        EXCEPTIONS
          INCONSISTENT_INTERFACE       = 1
          PROGRAM_ERROR                = 2
          OTHERS                       = 3
      IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endform.                    " form_build_fieldcatalog
    *&      Form  form_display_alv
          text
         -->P_IT_LFA1  text
    form form_display_alv using p_it_lfa1 LIKE it_lfa1  p_it_fieldcat TYPE slis_t_fieldcat_alv.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
        I_INTERFACE_CHECK                 = ' '
        I_BYPASSING_BUFFER                = ' '
        I_BUFFER_ACTIVE                   = ' '
          I_CALLBACK_PROGRAM                = sy-repid
        I_CALLBACK_PF_STATUS_SET          = ' '
        I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
        I_CALLBACK_TOP_OF_PAGE            = ' '
        I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
        I_CALLBACK_HTML_END_OF_LIST       = ' '
        I_STRUCTURE_NAME                  =
        I_BACKGROUND_ID                   = ' '
        I_GRID_TITLE                      =
        I_GRID_SETTINGS                   =
        IS_LAYOUT                         =
          IT_FIELDCAT                       = P_it_fieldcat
        IT_EXCLUDING                      =
        IT_SPECIAL_GROUPS                 =
        IT_SORT                           =
        IT_FILTER                         =
        IS_SEL_HIDE                       =
        I_DEFAULT                         = 'X'
        I_SAVE                            = ' '
        IS_VARIANT                        =
        IT_EVENTS                         =
        IT_EVENT_EXIT                     =
        IS_PRINT                          =
        IS_REPREP_ID                      =
        I_SCREEN_START_COLUMN             = 0
        I_SCREEN_START_LINE               = 0
        I_SCREEN_END_COLUMN               = 0
        I_SCREEN_END_LINE                 = 0
        I_HTML_HEIGHT_TOP                 = 0
        I_HTML_HEIGHT_END                 = 0
        IT_ALV_GRAPHICS                   =
        IT_HYPERLINK                      =
        IT_ADD_FIELDCAT                   =
        IT_EXCEPT_QINFO                   =
        IR_SALV_FULLSCREEN_ADAPTER        =
      IMPORTING
        E_EXIT_CAUSED_BY_CALLER           =
        ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = p_it_lfa1
        EXCEPTIONS
          PROGRAM_ERROR                     = 1
          OTHERS                            = 2
      IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    endform.                    " form_display_alv
    Please suggest a solution for this problem.. Thanks in advance.

    hi,
    it is getting because of fieldcat hear ur internal table is having all fields in lfa1, lfa1 is having more fileds alv cont display that much fields at a time . for that u are getting that messgae .  u can solve this problem by  filling fieldcat table manuvally insted of by FM 'fieldcat_merge'.  fill filedcat table some fields which are need to display by manuvally.
    thanq,
    rajesh.k

  • Unable to resolve the query

    Hi
    I have the following table.
    Complex No
    Complex Amount
    Child Invoice
    Invoice Amount
    Invoice Date
    123
    9000
    245
    2000
    1-Oct-13
    123
    456
    3000
    01-Nov-13
    123
    567
    4000
    31-Oct-13
    My requirement is to generate the following report
    Complex No
    Complex Amount
    Till Date
    Future Date
    123
    9000
    6000
    3000
    Where Till Date is the sum of Amount of Invoice Dated <= 31-OCT-13 and Future Dated is the sum of amount of invoice dated > 31-OCT-13.
    Can anyone help me with the query?

    with t as (
               select 123 complex_no,9000 complex_amount,245 child,2000 invoice_amount,date '2013-10-01' invoice_date from dual union all
               select 123,null,456,3000,date '2013-11-01' from dual union all
               select 123,null,567,4000,date '2013-10-31' from dual
    select  complex_no,
            sum(complex_amount) complex_amount,
            sum(case when invoice_date <= last_day(sysdate) then invoice_amount end) till_date,
            sum(case when invoice_date > last_day(sysdate) then invoice_amount end) future_date
      from  t
      group by complex_no
    COMPLEX_NO COMPLEX_AMOUNT  TILL_DATE FUTURE_DATE
           123           9000       6000        3000
    SCOTT@orcl >
    SY.

  • How to resolve the error in trigger

    Hi,
    I've written the trigger and the logic is correct but unable to resolve the error.. Could you please suggest me to resolve the error...
    Solved
    Thank you
    Edited by: Smile on Feb 19, 2013 2:34 AM                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Yes you can very well do that
    See the example below. I have three tables.
    SQL> create table t1(no integer)
      2  /
    Table created.
    SQL> create table t2(no integer)
      2  /
    Table created.
    SQL> create table t(no integer)
      2  /
    Table created.I have inserted sample data into t
    SQL> insert into t
      2  select level
      3    from dual
      4  connect by level <= 10
      5  /
    10 rows created.
    SQL> commit
      2  /Now i want to insert even numbers into table t1 and odd numbers into table t2
    SQL> begin
      2     insert all
      3             when (mod(no,2) = 0) then
      4                     into t1 (no) values(no)
      5             else
      6                     into t2 (no) values(no)
      7     select no
      8       from t;
      9  end;
    10  /
    PL/SQL procedure successfully completed.The output is below...
    SQL> select * from t1
      2  /
            NO
             2
             4
             6
             8
            10
    SQL> select * from t2
      2  /
            NO
             1
             3
             5
             7
             9Thanks,
    Karthick.

  • Java.sql.SQLException: Fail to construct descriptor: Unable to resolve type

    Unable to resolve the type declared in Oracle.
    This is the type which i create. When am indexing the type am unable to access the type from java. The type is directly created under the schema.
    type pepc_partial_qual_nmTab1 is table of varchar2(20) index by binary_integer;
    anArrayDescriptor1 = new oracle.sql.ArrayDescriptor("PEPC_PARTIAL_QUAL_NMTAB1",con);
      anARRAYout1 = new ARRAY(anArrayDescriptor1, con, anArrayOut1);
      cstmt.setARRAY(1,anARRAYout1);
      cstmt.registerOutParameter(1,OracleTypes.ARRAY, "PEPC_PARTIAL_QUAL_NMTAB1");
    This is how I try accessing the type from JAVA.
    Thanks in Advance

    Think I found a solution,.. or at least stopped getting the error. I'm using oracle's OracleCallableStatement instead of the java.sql.CallableStatement. I'm also using a different app server. same version 9.0.2.0.0 I'd recommend applying the patches to anyone using this version. I've ran into some errors that have been patched. It's a long process though..
    cheers.

  • Can't connect to DFS shares from machines not part of the domain

    I'm not sure if this is by design, but we can't connect to DFS shares from machines that are not joined to the domain.  We can't even map a drive using credentials of a domain account.
    Is that how DFS is supposed to work? 

    Hi RJO22,
    I did some research on this topic, and got a conclusion:
    Clients that belong to a workgroup can only access the DFS namespace if the name resolution mechanism that is in place can locally resolve the domain name
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/c3214a4c-8088-446c-ba4d-643d5baf87cc/how-to-access-dfs-namespace-from-a-standalone-windows-2003-server
    Regards,
    Alex Zhao
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Unable to unjoin a domain

    Hello,
    we are unable to log on to a reinstalled network machine.
    when we try to log on we get the following error.
    Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear, contact your system administrator
    for assistance.
    let met paint the picture: a defective machine was reinstalled with a sysprep, after doing so we wanted to rejoin the domain wich we were able to do. after joining the domain we found our machine in active directory and Altiris.
    But when the user wanted to log into the network he was unable to do so (look above warning mentioned)
    i tried to unjoin the domain but with the local admin account i am unable to unjoin the domain.
    Access denied????
    We are using win xp machines and 2003 servers
    can anyone advise on how to use the machine again in the domain?
    At this point we are close to reinstall the machine harddrive again and try again. But it must be more simpler way to solve this problem?
    Regards Ger

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is a standard response I’ve written up in advance to help many people (thousands, really.)
    who post their question in this forum in error, but please don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
    of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…? forum and it’s here:
    http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks, Mike
    MSDN and TechNet Subscriptions Support

Maybe you are looking for