Question about phone repairs

I'm sending my lumia 800 to my network for "repair" (not sure what they are going to do though as as far as i'm aware there is no definitive cause for the issue) due to the shocking battery life. Light user is eating away at battery craaaazzzyily.
I got this email from them today
I've now booked your phone in for repair. We will send you out a pre-paid repairs envelope, please allow up to 5 days for delivery of this.
If you have any content on your phone, like contacts or pictures, save them to your SIM card, memory card or computer as these may be lost during repair. For help doing this check your user guide. Then remove your SIM, memory card and the back cover of your phone, you'll need to keep these for your repaired phone. Please make sure you send your battery and charger with your phone, they'll need to be wrapped up safely to avoid any damage. It normally takes three to five working days for your phone to be repaired and returned, working days exclude weekends and bank holidays. If we can't repair your phone within warranty you may be charged a fee. We'll send you a letter explaining this and what to do next. We will try our best to repair your phone, but may exchange it with a refurbished one of the same or higher value and of a different make or colour.
Am I being unreasonable asking them to NOT give me an old refurbished handset (especially in a different colour or make) that someone else either broke or didn't want? I'm paying £30/m for this...do I not deserve a brand new working handset? :/

We will try our best to repair your phone, but may exchange it with a refurbished one of the same or higher value and of a different make or colour.
I just sent mine in for repairs, I hope I don't end up w/ a pink one.
Nokia phones (Owned 1999-Now):
5110, 3390, 3520, 6230, 6682, N72, 5800 XM , Lumia 800, Lumia 900 (Currently owned)

Similar Messages

CUCM Group Configuration- question about phones failing to secondary callmanager

I wanted to get clarification about how exactly phones will register to the secondary or tertiary servers if the link to the primary fails.
I have a 3 server CUCM cluster. 1 subscriber that some phones register to is separated from the other 2.
When the link to that sub goes down, the phone should then register to the secondary server of its Cisco Unified CallManager Group configuration, correct?
If this is true, then my next question is how long does it take to then failover to the secondary server?
SRST is not involved in this, it's just the CUCM Group Config. Any help clarifying how phones behave in this situation?

I found my own answer in the Cisco Press Troubleshooting Cisco IP Telephony book, page 155:
"The TFTP configuration file received by the IP phone has a list of up to three CallManagers
for registration purposes. The order of CallManagers indicates their priority. The first is the
highest-priority CallManager for the IP phone. It is the first place the IP phone attempts to
register. The highest-priority CallManager is also called the primary CallManager.
When the IP phone registers with its primary CallManager, it also establishes a standby
TCP connection to the next-highest–priority available CallManager, sometimes called the
standby CallManager, secondary CallManager, or backup CallManager.
The IP phone knows that there is an alternative CallManager for quick failover if it loses connectivity
with its primary CallManager.
At any given point in time, the CallManager to which the phone is registered is its active
connection. The CallManager node that has a standby TCP connection for the IP phone is
the standby connection.
Failover occurs under two conditions:
• If the TCP connection between the IP phone and the primary CallManager goes down.
Incidentally, stopping the CallManager service on a server causes all the TCP connections
to be closed and all the IP phones on that server to register to their standby.
• If CallManager has not responded to three consecutive KeepAlive messages sent from
the IP phone.
Any number of network-related issues could cause the TCP connection to go down. When
the IP phone registers with its standby CallManager, it registers with an alarm indicating
why it failed over.
Under the second condition, CallManager fails to respond to three consecutive KeepAlives.
The IP phone sends a KeepAlive message every 30 seconds by default. CallManager should
answer each KeepAlive the IP phone sends with an acknowledgment message. If
CallManager fails to respond to three consecutive KeepAlive messages, the IP phone marks
the connection as “bad.” The IP phone does not tear down the TCP connection, but it does
not attempt to re-register with the “bad” CallManager either. It continues sending
KeepAlive messages to the “bad” CallManager until CallManager tears down the TCP
connection. This delay gives CallManager time to respond if it recovers quickly. After 10
minutes, the IP phone removes the “bad” tag and again tries to establish communication
with CallManager using KeepAlive messages in the process just described. During this
time, the IP phone attempts to establish a connection with its secondary CallManager (or
its tertiary if the secondary is not available) and registers if possible.
If a call is in progress when an IP phone detects the loss of a TCP connection, the IP phone
does not fail over until the call is finished. If CallManager fails to respond to three consecutive
KeepAlive messages while an IP phone has an active call, the IP phone again waits
until the call is finished before registering to its standby CallManager."
Hope that helps someone else in the future.

I have a question about a repair

Apple is sending me a replacement phone and on the iphone 5 that I have right now I have apple care plus. How will this transfer to the new phone since they will have different serial numbers?

A friendly suggestion: search the forum before posting a question. This one is asked almost every day.
The errors are spurious. Ignore them.
Although repairing permissions is a popular ritual, it's almost never useful. Don't waste time on it unless you have a specific reason to think it's necessary.

Basic questions about recovery/repair preparation

When I got my machine, over two years ago, I made repair disks on DVD's per Toshiba's instructions. Now, with my nightly backups, I have it make a system disk image on a NAS device.
If I were to have a large failure and need to restore my system, is there anything I can do now that would prevent me from having to go back to my inital system install of two+ years ago and start reinstalling everything?
I guess what I'm wondering is if would making another set of more recent repair disks be useful at all in giving me a "jump start" on recovery and how my scheduled system disk image fits into the picture. I've heard some folks say system disk images from a NAS device can't be used but they were not particularly credible sources so I don't know.
Probably pretty basic questions, but having recently had a scare with my machine, I want to be sure I'm as prepared as I can be.
Thanks.
Solved!
Go to Solution.

Now, with my nightly backups, I have it make a system disk image on a NAS device. .... I've heard some folks say system disk images from a NAS device can't be used...
If you cannot boot from an optical disc or flash drive to a program that restores from that NAS image, Sally, then it's useless. What system/procedures are you using? Read the manual.
The original recovery discs in my view are not very helpful. I would use them only to establish whether hardware is at fault when debugging a problem. Daily backups are the best source of recovery. We keep ours for ten days and test the recovery procedure from time to time.
Most of us who make backup disk images create them on an external drive connect via USB. Windows 7 already has such a backup program. One can boot from a repair disc to restore that image.
As you realize, this is important Let's sort it out.
-Jerry

Questions about phone stratospher

Duplicate post - please see:
https://community.verizonwireless.com/message/1065830#1065830
Message was edited by: Admin Moderator

mindthedot wrote:
I'm considering trading my iPhone 5 for a Galaxy S3 (for no other reason than a change of scenery).
The questions I have regarding a trade are the following:
1) What does the process look like to swap the phones/activate them on the other person's account? Would we both need to be at a Verizon store at the same time for the swap to take place since the iPhone and GS3 have different size SIM cards?
2) Would the initial device warranty be applicable after the trade?
3) Does the device insurance apply to the S3 if it's already on my line for the iPhone?
Thanks in advance.
1. it would be smoothest if you were both in a store to get this done. they could work out the sim card issue instore
2. nope, the warranty is for the original owner only, iirc
3. insurance should apply

Question about Windows repair installation

Hello,
I have searched through the forum, but am still a little confused as to the use of expert recovery mode on my Toshiba recovery CD.
I cannot boot Windows at all. I haven't backed up any of my data (foolish!).
I currently have a single partition.
Is it possible to create a second partition using expert recovery mode, and re-load Windows to that. Would this only format one partition, allowing me to subsequently retrieve files from the first partition?
Or will this format the whole drive, load Windows, and then create the partitions?
Any advice greatly appreciated.
Thanks,
Fitz.

Hello Fitz
Expert mode allows you to do two things:
1. Install OS on already persisting partition (if the HDD has already two of them)
2. Create own partition (in this case the whole content will be erased)
Please try to boot up using SAFE mode (press F60). If this doesnt help you can do the follow to save your data:
1. Connect the HDD to other PC as external device (using USB HDD box)
the HDD should be recognized automatically and you can copy all your data to other PC HDD
2. You can try to use Partition Magic tool. Start it using external FDD and create two partitions. After doing this start your notebook with start disk and try to copy all the data to second partition.
Detailed explanation about expert mode installation and how to create own partition you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518
If you have more question please write again!

Few questions about phone itself and PC Suit coope...

So I have 5610 XM phone with 09.40 firmware and PC Suite v 7.1.18.0...
As I understand it sync works like this 1. New event on the phone (like new sms) new sync. 2. New event on PC Suit (like replying to that sms you just got) sync again. PC and phone are connected using USB cable.
The prob is that when I get a new sms sometimes it takes ages to actualy see that I got it on the PC screen. Sometimes it syncs right away and next time it takes like 1 min. Same thing goes with replying. You just got a new sms and trying to reply... bang error shows up that the message can't be sent but if you try again 2 mins later it works fine again. Refresh messages button never help.
And btw everything is damn slow... not even mentioning that PC Suit can't read contacts from SIM card... only from phone memory..
So do I have a problem here of my own or it just works like that and I can go fck myself?
Thx for replies in advance.

I too experience long delays in updating the messages pane, whether connected via USB or bluetooth. Sometimes it's quite quick.. But other times it can take 5 min to show up a new message. Generally I don't care because I don't reply to texts very quickly, much to the annoyance of friends, family..

Question about permissions repair, strange messages

The following was the result from my recent repair after installing 10.5.1 Are these results normal with so much not being repaired?
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Same story for me I guess:
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Question about permissions repair

I repaired permissions and one thing that I got was:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Should I be concered?

this message is harmless and should be ignored. everybody gets it.
http://support.apple.com/kb/TS1448

Question about RSD repairs

I noticed a number of people get their bezel and top case replaced along with the logic board and/or heatsink.
Is that only for those white MacBooks with discoloration and users with fit problems with their bezel?

My black MacBook had the top case replaced as well. Before, when I would press the power button to get the shut down menu, I would hear some squeaks from the case on the right hand side. Now that sound is gone. The case seems much more solid.

Questions about Contracts and New Phones

I've had some questions about how upgrading and adding new lines to a contract works and I haven't been able to find the answers through Google. First some background information: We started this most recent contract in September of 2011 and as such the current contract will end September of 2013. According to the phone information portal, all three of the devices on my account will be eligible for an upgrade this Saturday (May 4th, 2013). My daughters birthday just so happens to coincide with that date and as such we were planning on surprising her by taking her to buy a new phone and we are going to allow our son to upgrade his phone as he has been asking to for a while.
Is there any way of locking/limiting the amount of data allowed for each phone on a shared plan? I'm worried that my daughter will go way over our limit and not pay attention to the point where she will end up costing us a very large amount of money
Does adding a new line require the start of a new contract?
My son was interested in purchasing the "Samsung Galaxy S4" and has noticed that pre-orders for that phone are currently available. Is it possible to pre-order the phone on that date using the upgrade so that the price will be reduced?
If the answer to number 2 is a no, does adding the new line take away the upgrades from other phones or would he be able to go to the store past the release date and upgrade then?
Thanks for taking the time to read through all of this. Any help that I receive will be extremely appreciated.

1. Yes. There is an additional fee per line you wish to do this for. When you add the line you can choose this option and set the data amount it is allowed to use.
2. Yes. Each line is a separate contract with its own expiration date.
3. The contract starts when you sign up for the contract. The amount will be pro-rated on the plan if it is not started until part-way through your billing cycle that is what you are asking. Doing the pre-order just guarantees you the phone in case they sell out.
4. No it will not take any upgrades away as each line has its own termination date. You can move upgrades around between lines though.

Question about sony NFC tags

Hi every body,
I have a little question about the NT1 smart tags of sony.
I installed other app from google play to NFC tags in my phone.
I installed it, because the smart tag app of sony, don't have the action to turn on or turn off the GPS by NFC tag.
When I used with other app, and I written on the blue smart tag, I mark to became the blue smart tag to read only.
So, now I can't to write on him, and the phone is not recognazied the blue smart tag ( all other smarts tags is OK, because I didn't used them ).
When I scan the blue smart tag, the phone show a message: "unknown type tag".
Am I can cancelled it and became it back? that's mean that the phone is recognaized it and I can to write on it?
Or, is it one way, and I can't used with the blue smart tag again?
Thank you.

you can do a factory reset or repair your phone with SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Question about phone repairs

Similar Messages

Maybe you are looking for