Question about possible limitation with Outlook 2013 and Acrobat 11 Pro

Is anyone aware of a limit on folders displaying in the "Convert folders to PDF" when selecting folders to print from Outlook 2013?
My coworkers and I have noticed that plus signs are not available for viewing folders when attempting to print a pdf file using the "Convert folders to PDF" option in the Adobe PDF plug-in. However, these plus signs that are used to expand folders when viewing PST files in Outlook are available.
The below is not the exact example of the issue. I included it to show how the plus signs display. Each PST file that is added to Outlook should display in the window including all of it's folders and subfolders.
If anyone can answer whether or not there is a limits or any limitations when working with Outlook in this regard it would be greatly appreciated.
-Jason

Good morning to everybody.
Hi Test Screen Name, thanks to answer to my aplly.
Well after see same computers here, my Acrobat Pro is the 7.0 (CS2), ... and the Reader is 11.0.2 (XI) ...
But after your help here, I think the script - event.target.buttonImportIcon(); doesn't work with higher than CS2
The CS3 and CS5 we have here - Didn't work,
but in the computers where is install the Adobe CS2 ... Almost Perfect-Works
On computers without Adobe - Is better I keep dreaming - "No way josé - don´t work" || Reader 10 (X)
It's a shame, a simple action and quite useful for interactive forms. And I ran out solutions ...
I going to pray for them have a lower Reader version
Anyway Thanks to _ Try67 _ and _ Teste Screen Name

Similar Messages

How do I create the highest quality pdfs with InDesign CS5 and Acrobat Pro 9? New settings needed?

I sent a lot of jobs to printing companies by sending them high-res proofs on very large, multiple page jobs with lots of photos and graphics. Many companies are requesting that I just send pdfs. I just upgraded to Windows 7 and CS5. I used to have some special settings in my older Acrobat Distiller and InDesign which have been lost. They gave a much better result that what I seem to be getting from the "Press Quality" setting for pdf's. Does anyone have an excellent list of settings that can used to improve the quality of pdf's? I don't know if this is a combination of settings in both InDesign itself, as well as in Acrobat Distiller, or if the settings in one program will solve this. I have a job pending that needs improvement in the pdf quality. Thank you.

Thanks Peter. My last post was specific to using the Print Booklet feature (which is now solved thanks to your help). But this is related to creating high-res pdfs in general that go to printing companies, and being used for sending high-res proofs to clients. In general I don't need to set up printer spreads for my jobs (just for the one I asked about in my other post), but I used to have some specific settings that a printing company supplied me with to give the highest res pdf output possible. Those settings did in fact give a better result than the Press Quality settings built into my Adobe programs. I have had printers over the years request that I create a postscript file, then use distiller (using the settings they supplied) and I got an excellent result. After getting a new computer, Windows 7 and new CS5 and Acrobat Pro 9 upgrade, all of these settings were lost. I have notes on the settings from a couple of years ago, but they don't seem to apply to the CS5 programs in every given area and I feel like there may be just a couple of boxes that either should or shouldn't be checked that I'm missing now.
I understand that this is very specific information, and I may just need to go with the Press Quality settings. The printing company that gave me that great info a while back is no longer in business and other printing companies I have checked with won't spend that kind of time with me (or maybe they don't know anything other than using the Print Quality setting). Maybe within the CS5 program now, the quality of this setting has been improved more than I realize yet. Again, I'm new to CS5 and am just trying to get everything back to the way I used to have things running, and trying to get the best results possible.
Thanks again!

Sending Calendar Appointment from Macbook to my wife's PC with Outlook 2013 and it sends a whole calendar and not just the one appointment.

I have a Macbook Pro Late 2013, running OS X 10 Yosemite 10.10.1 and my wife has a PC with Windows 7. I use calendar that comes with my Macbook and she uses Outlook 2013 calendar. When I email from Mail on my Macbook an appointment event and my wife opens the email with the appointment, it wants to add a whole new calendar for this one event, why is this? I just want to send her a single appointment not a whole calendar.
I tried to see if Apple Calendar on my Macbook has any options to help with this issue and I can't see anything that will help.
Should I check out the Outlook 2013 on my wife computer to see what options if any that I need to change to help with this problem?

closing in favour of https://support.mozilla.org/en-US/questions/1024353

Outlook 2013: Accessing Exchange with Outlook 2013 and OST on mulitple machines?

My organization recently transitioned to off-site Exchange servers. Users were upgraded to Office 365 / Outlook 2013 using OST files (PST files previously
In addition to my work laptop, I have Outlook 2013 available on a personal Surface Pro 3. I cannot find a definitive answer on whether it will be a problem to connect to Exchange via Outlook 2013 using an OST files from both the work laptop and personal
tablet. Will having OST files on separate machines create sync issues? I have access to Outlook Web Access on the Surface, but prefer the Outlook desktop application for quick actions and other tools.

Hi,
Typically, when you use a Microsoft Exchange Server account, your email messages, calendar, and other items are delivered to and saved on the server. You can configure Outlook to keep a local copy of your items on your computer in an Outlook data file that
is named an offline Outlook Data File (.ost).
As what Amit says, there would be no issue configuring Exchange account from both the work laptop and personal tablet. The OST file is synchronized with the Exchange computer when a connection is available. It is synced from Exchange server instead of the
Outlook client from your first account computer.
For more information about Outlook Data Files (.pst and .ost), please refer to:
http://office.microsoft.com/en-us/outlook-help/introduction-to-outlook-data-files-pst-and-ost-HA010354876.aspx
Regards,
Winnie Liang
TechNet Community Support

Problems with Outlook 2013 and Windows 8.1 with Exchange 2013

Hello Guys,
I just got started with testing Exchange 2013. My lab consists of 2 Exchange 2013 Servers, the Installation Media is the Exchange 2013 SP1 from MSDN, Server 2012 R2 and 2 Windows 8.1 Clients with Office 2013 SP 1 with all updates installed. I have configured
some mailboxes in Exchange and I want now to configure Outlook. So at the initial startup Outlook displays the correct Name and Mail Address. When I click next I make it to Logging on the mail server and then I am getting the Error : The connection to Microsoft
Exchange is unavailable. Your Network adapter does not have a default Gateway. All servers are in the network 192.168.5.0 /24. Any suggestions how can I fix this problem ?
Thank you

Hi there and thanks for Posting!
You can correct the issue by disabling outlook connection optimism.
Full details can be found from link below.
http://blogs.technet.com/b/rmilne/archive/2014/03/27/outlook-unable-to-connect-to-exchange-_1320_default-gateway-not-found.aspx
Happy Testing :)
Farhad

A Question about Windows games with boot camp and system requirements

I don't plan to play many games on my Mac, but after seeing what can be done with it, I've been entertaining the idea of picking up a Windows game or 2 to play in Boot Camp (considering picking up a XP PRO with SP2 for this).
My question is about the listed systed system requirements and how they might apply to my Mac Pro. I have a dual 2.26.
As a specific example, I was looking at the game Fallout 3. The box lists a 2.4ghz processor required but I've read on this forum about people running it great with less on their Mac.
So I was wondering what I would need to consider when looking at those requirements or if games in that range do indeed run well...

Thanks Kap, you're always helpful.
That's exactly what I was wondering. How the requirement on the box applied to having an 8 core at a lower clock speed.
I was looking at XP home at amazon and newegg, but haven't been able to tell if they are 64 or 32 (unless that means just install that version from the disc).
It's nothing pressing, just something I was entertaining for now.

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Two questions about possible limitations in the Trial version

1) I'm unable to format Date and Time using the Inspector/Table/Format option - is this because I'm using the Trial Version?
The thing I'm trying to do is lose the day of the week in the default, so instead of "Sunday, August 26, 2007" it would read "August 26, 2007".
Can I do this in the full registered version?
2) I'm unable to change the top margin of a document in the trial version. I've gone into File/Page Setup/Paper Size/Manage custom sizes and changed the margins to no avail. It prints out exactly as it did before I made the changes. Is this also a limitation of the trial version that works fine in the full version?

Hi Walt:
Thanks for the quick reply.
Re: the date format, I know I can change it manually by control-click, but I was trying to change the default, so that it always gives me "Month Date, Year", instead of "Day of week, Month Date, Year". My problem with the "Automatically Update on Open" option is that yes, it will give me what I want when I CREATE a new document, but anytime I open an old document to read it, it will change the date from the date it was created to the date it was re-opened.
Is there ANY way I can insert date and get the format I want each time without having to manually change it?
As for the top margin, thanks. I see that the only way to change a document's margins is by going into the Inspector and changing them under "Document Margins". I was changing them under File/Page Setup, and drilling down to Printer Margins. Since that didn't seem to change anything ... what are Printer Margins and what does changing them actually do (since I couldn't tell any difference when I changed them)?
/rb

Verizon email cant connect with outlook 2013, and windows 8

I have have Verizon, Microsoft, Mcafee, and my isp optimum on he phone for a total of 9 hours. all the setting are as dictated by verizon. Any other email account sets up with no issue.
Some setting in verizon had to have changed from the published ones. any ideas

EFisk wrote:
I have have Verizon, Microsoft, Mcafee, and my isp optimum on he phone for a total of 9 hours. all the setting are as dictated by verizon. Any other email account sets up with no issue.
Some setting in verizon had to have changed from the published ones. any ideas
For the sake of example, we are going to pretend that we are setting up fictional account "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: pop.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): Yes
Port: 995
Outgoing Server: smtp.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): Yes
Port: 465
If you are given the option anywhere for Secure Password Authentication (SPA), set it to No or Normal
These settings should work unless you have a Verizon/Yahoo account, in which case the server names are: incoming.yahoo.verizon.net -and- outgoing.yahoo.verizon.net
If all of that is set up and it's still not working, your best bet is to provide a screenshot of your settings (with personal information blocked/removed) and any errors you are getting.
All of that said, your IP may be blocked by Verizon. They had some issues with attacks from overseas and way overcompensated, causing issues for people even on different providers here in the US. Try getting a new public IP address (Optimum should be able to help you with this). I would love to say they're working hard to correct this nonsense, but they're entirely silent on the point since their initial announcement.
Best of luck to you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

MBA 2013 - cursor control lost with Bluetooth speakers and Acrobat Pro

When using Acrobat Prof to fill in form (using Typewriter) and have Bluetooth on playing audio speakers the cursor control in Acrobat goes hayware and cannot control cursor - ok when I close bluetooth and play music via MBA speakers - any fix except to stop using the Bluetooth and external audio speakers?
Using i7 ultimate - 8Gb RAM+512 SSD

It might be an hardware issue of course. But I'd start by completely uninstalling the Symantec software.

Incoming Emails with Blank message body in Outlook 2013 and 2010

Dear TechNet
Why Some of the incoming message we received in Outlook are displayed with blank message body but same message when viewed from Internet browser web client or in Blackberry device message body is viewable and also same message is viewable
in outlook ver 2003 , 2007, 2010 ( without service pack1)
Above problem of incoming email message with blank message body we are facing to users with outlook2013 and outlook 2010 (with sp1) and when the sender of the email is using Lotus Notes Client ver 8.5.3
Request you kindly suggest any setting need to be done in outlook or windows registry to resolve the email messages with blank body.
Thanks in Advance ............................
Regards,
Jayesh
Mob : 09819375673

This is commonly seen with an Outlook add-in, such as the AVG add-in. I just ran into it again today. I removed AVG and enabled Windows Defender on a Win8 laptop with Outlook 2013, and that took care of the issue. If you must use AVG, you can disable the
add-in and then test new emails.
To disable the AVG add-in, this is one method:
Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry.
(https://support.microsoft.com/kb/322756/ )
in case problems occur.
To resolve this problem, follow these steps to disable the Avgoutlook.Addin add-in. If the problem is , we recommend that you contact the vendor of the add-in to ask about an updated version of the add-in.
Exit Microsoft Outlook if it is running.
Start Registry Editor.
In Windows 8
Press the Windows logo key+R, type regedit in the Open box, and then press Enter.
In Windows 7, 8 or Windows Vista
Click Start, type regedit in the Start Search box, and then press Enter.
Locate and then select the following registry subkey, depending on the type of Office and Windows installations that you have.
32-bit Office plus 32-bit Windows
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
64-bit Office plus 64-bit Windows
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
32-bit Office plus 64-bit Windows
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
Right-click the LoadBehavior value, and then click Modify.
Change the Value Data value to 0, and then click
OK.
Start Microsoft Outlook.
Note To re-enable this add-in in Outlook, change the LoadBehavior value to
3.

Outlook 2013 and MS Exchange Sync'd with iCloud

I am using Outlook 2013 and my email is synced with MS Exchange. Can I sync my Contacts with Outlook 2013 and iCloud since I have MS Exchange?

Here's the official word from Apple Support, video is not a supported photo format:
http://support.apple.com/kb/HT4486
-Doug

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Syncing BT Mail with Outlook 2013

Hi, please can anyone tell me if it is possible to sync BT Mail with Outlook 2013 and if so how do I go about doing it, many thanks

You need to set up your email up as an IMAP account if you want it to sync with BT Mail
See link for the settings
http://bt.custhelp.com/app/answers/detail/a_id/44917
http://office.microsoft.com/en-gb/support/set-up-email-in-outlook-2010-or-outlook-2013-HA102823161.a...
To set up a new account on Outlook using the following settings
Your Name
Email address: Full btinternet email address
Account type: IMAP
Incoming server: mail.btinternet.com
Outgoing server: mail.btinternet.com
Logon information:
User name: prefix only of email address
Password: Email password
Tick remember password
Do not tick Require password auth (SPA)
Click Button More settings
Tick box my out going server requires authentication
Tick box use same as incoming
Do not tick log onto incoming server
Advanced Button
Incoming server 993 Tick requires SSL
Outgoing server 465 Use following type encryption SSL

ICloud control panel not syncing with outlook 2013

I have installed iCloud on windows 7 64-bit. after installation it asked if I want to sync with outlook my mail , contacts etc. so I selected the option to sync and clicked apply.
The program said that it needs to setup mail, contacts etc with outlook 2013 and the loading gif started to work , then I click on close .
when I open outlook 2013 i do not see my icloud folder or contacts .
am I missing something here?
PS. I tried to uninstall and re install icloud control panel with the same effect.
Kindly can anyone help

In Outlook 2013, I navigated to "People" and copied the contacts that I wanted to sync from the "Contacts" folder to the "Search Results" folder (<ctrl>+[drag and drop] to folder in left hand Folder pane).
iTunes then synchronised those contacts (only) fine.

Question about possible limitation with Outlook 2013 and Acrobat 11 Pro

Similar Messages

Maybe you are looking for