MBA 2013 - cursor control lost with Bluetooth speakers and Acrobat Pro

When using Acrobat Prof to fill in form (using Typewriter) and have Bluetooth on playing audio speakers the cursor control in Acrobat goes hayware and cannot control cursor - ok when I close bluetooth and play music via MBA speakers - any fix except to stop using the Bluetooth and external audio speakers?
Using i7 ultimate - 8Gb RAM+512 SSD

It might be an hardware issue of course. But I'd start by completely uninstalling the Symantec software.

Similar Messages

How do I create the highest quality pdfs with InDesign CS5 and Acrobat Pro 9? New settings needed?

I sent a lot of jobs to printing companies by sending them high-res proofs on very large, multiple page jobs with lots of photos and graphics. Many companies are requesting that I just send pdfs. I just upgraded to Windows 7 and CS5. I used to have some special settings in my older Acrobat Distiller and InDesign which have been lost. They gave a much better result that what I seem to be getting from the "Press Quality" setting for pdf's. Does anyone have an excellent list of settings that can used to improve the quality of pdf's? I don't know if this is a combination of settings in both InDesign itself, as well as in Acrobat Distiller, or if the settings in one program will solve this. I have a job pending that needs improvement in the pdf quality. Thank you.

Thanks Peter. My last post was specific to using the Print Booklet feature (which is now solved thanks to your help). But this is related to creating high-res pdfs in general that go to printing companies, and being used for sending high-res proofs to clients. In general I don't need to set up printer spreads for my jobs (just for the one I asked about in my other post), but I used to have some specific settings that a printing company supplied me with to give the highest res pdf output possible. Those settings did in fact give a better result than the Press Quality settings built into my Adobe programs. I have had printers over the years request that I create a postscript file, then use distiller (using the settings they supplied) and I got an excellent result. After getting a new computer, Windows 7 and new CS5 and Acrobat Pro 9 upgrade, all of these settings were lost. I have notes on the settings from a couple of years ago, but they don't seem to apply to the CS5 programs in every given area and I feel like there may be just a couple of boxes that either should or shouldn't be checked that I'm missing now.
I understand that this is very specific information, and I may just need to go with the Press Quality settings. The printing company that gave me that great info a while back is no longer in business and other printing companies I have checked with won't spend that kind of time with me (or maybe they don't know anything other than using the Print Quality setting). Maybe within the CS5 program now, the quality of this setting has been improved more than I realize yet. Again, I'm new to CS5 and am just trying to get everything back to the way I used to have things running, and trying to get the best results possible.
Thanks again!

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

I have synced my macbook pro with new bluetooth speakers and can successfully play internet radio music from my macbook through bluetooth. However I cannot get my iTunes library playing through the bluetooth speakers. Can anyone help?

my macbook pro is successfully linked to bluetooth speakers and I can stream music from the macbook through the speakers. Except for iTunes. iTunes will not allow me to select the bluetooth, only 'computer speakers' or 'apple tv'. I can stream my iTunes library from my iPhone and iPad through these speakers, but not from the MacBook's iTunes. Is there an easy solution?

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

Can I use bluetooth speakers and wired speakers together

Can I use bluetooth speakers and wired speakers together?

You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

I have a 2012 Ford Focus with bluetooth messeging and I was wondering if the iphone 3gs has bluetooth messeging capabilities?

I have a 2012 Ford Focus with bluetooth messeging and I was wondering if the iphone 3gs has bluetooth messeging capabilities?

No. The iPhone does not support the MAP (Message Access Protocol) bluetooth profile.

Print only cursor-selected area of a PDF in Acrobat Pro, just as it is psbl to do in a browser

Hi
I want to print only cursor-selected area of a PDF in Acrobat Pro. That could be both text and images, which are in my selection. Just as it is psbl to do in a browser. Is it possible in Acrobat PRO?
I am using the latest Acrobat Pro 11.0.9

Thanks for your effort but this again clearly does NOT answer my question. I do see a particular problem and that is that I might want to select text and images over a range of multiple pages. In a doc of 20 pages I might want to make a single selection of the text starting PRECISELY at the MIDDLE of page 2 and then continue dragging my selection all the way to PRECISELY the MIDDLE of page 15, thereby selecting all text and images within the precise range of my selection. That is some 13 pages there and I want to print out ONLY THAT selection of text and images. And in that case I cannot use your suggestion with the marquee zoom. Do you get me?

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS

I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.

if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
ai cs6 requires:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
2 GB of RAM (8 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card

Lost install disks, have CS4 and Acrobat Pro v9 serial #s, how can I reinstall software on my Mac?

I recently had to wipe my entire hard drive on my mac book pro and need to reinstall all my adobe software. However, I have lost my install dvds. I do have all my serial numbers. How can I re-install CS4 and Acrobat Pro v9?

follow the directions and download the trial(s) here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
use your serial to activate.
if you have dl difficulty, re-read the directions.

Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. Why?

Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?

Hi irenedix,
After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards,
Rave

No sound with bluetooth speakers / aptX issue

Hello,
i can't get any sound from my bluetooth speakers. the bluetooth of my Z3c works perfectly with my Plantronics BackBeat FIT, but does not work with my JBL OnBeat aWake speakers.
i did already disable the throw function, but that didn't help.
when i connect my phone to the OnBeat, a popup on the phone say's it is connected to a aptX device. i am not sure if the OnBeat has aptX.
NB the OnBeat works perfectly with other bluetooth devices including my old Galaxy Nexus.
can anyone please help me with this issue?
Cheers

Have you checked the Smart connect app to see if it's a paired device and when playing music do you enable throw as you said you disabled it
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

G580 + Win8.1 - problems with Bluetooth drivers and Dolby

Hello
When I bought my Lenovo G580, it had Win8 installed but I had to upgrade to Win8.1 (sadly). I've been having problems ever since.
When I open Lenovo Solution Center, it shows errors with these drivers:
Bluetooth Audio Device
Virtual Bluetooth Support (Include Audio)
Bluetooth LWFLT Device
Status: Deactivated
In Device Manager there's a yellow error thingy on Bluetooth Audio Device. It says something about code 10. It also says it is updated to the newest version. I checked Lenovo's website (just in case) but there's no newer driver.
Second problem is with Dolby Advanced Audio V2. I've tried uninstalling it, reinstalling it. Uninstalling Conexant Audio Driver, reinstalling, etc. Nothing works. After a few days after upgrading to Win8.1 the first time my pc went totally crazy. Nothing was working, so I had to revert back to Win8 but was forced to upgrade again. I haven't done anything after the last upgrade because I don't know what to do. Hope someone can help.

hi jonhildelia,
Welcome to the Lenovo Forums.
For the bluetooth, can you try the following (after upgrading the machien to Win8.1):
1. Navigate to Control Panel (Icon Views) > Programs and Features and on the list of installed programs, uninstall the Bluetooth Driver.(reboot if necessary). When finished, the bluetooth device in the device manager should now look like this:
2. if everything goes well, reinstall the Windows 8 bluetooth Driver (either from the D:\drivers\bluetooth or from the G580 download page)
For the Dolby, the issue might be similar to this article and this thread.
Can you try the following:
1. Uninstall the Conexant Audio Driver and anything that relates to Dolby from the Control Panel (Icon Views) > Programs and Features
2. Re-install the Conexant Audio Driver (Win8 version) from the D:\Drivers folder or from the G580 Downloads page (this should reinstall the audio driver and Dolby).
3. In an event that the Dolby doesn't work, reinstall it from one of theseC:\drivers\audio\DolbyGUI or C:\drivers\audio\DolbyGUI
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problem with internal speakers of MacBook Pro

Hi,
I wanted to know if anyone have experienced a problem with internal speakers of Mac Book Pro. In my MackBook the Internal speaker volume goes down automatically. I checked the System Preferences>Sound>Output , from there I check that it is in the middle ( Balance) However, the problem is still the exists. Just for testing I played an audio file and I moved the bar toward the right speaker it is the same and when I move toward the left speaker the whole sound goes off . Looks like one speaker stops working completely. Then I checked the Utilities > Audio MIDI Setup > Configure Speakers from there I checked both left and right speakers and the channel frequency is fine. Still same issue. I have no idea what is going on , I really need your suggestions to get this fixed.
Thanks in advance.

Try the following:
http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
Also, consider installing Boom

MBA 2013 - cursor control lost with Bluetooth speakers and Acrobat Pro

Similar Messages

Maybe you are looking for