Question about project "production"

Once I complete a project I'm working on I'm planning on burning 1 master to a Taiyo Yuden White Inkjet Hub Printable 16X DVD-R disc. Once I burn the master I plan on using Toast to replicate all the discs to the same Taiyo Yuden media and then finally print the labels.
My question is, can I burn this at 16x or does it run a risk of the disc not playing correctly? If so, what is the fastest speed I could use without running this risk?
One last question, does it matter if I burn first and then print or should I print first and then burn?
Thanks

I'm planning on burning 1 master to a Taiyo Yuden White Inkjet Hub Printable 16X DVD-R disc.
Make a disk image instead. It will be faster than a disc to disc copy.
I have burnt tons of discs with the setting on "As fast as possible" with a 16x drive and discs. Never a problem. Some say that burning at a lower speed will increase reliability and decrease the chance of turning out a dud. Can't say that I have seen a difference.
does it matter if I burn first and then print or should I print first and then burn?
I would burn, check the disc and then print. If you do happen to get a bad batch, that's a lot of wasted time and ink if the discs don't work.

Similar Messages

  • Getting Started with CFBuilder - A Question About Project Settings

    Hello All,
    I'm just getting my feet wet with CFBuilder and giving it a spin after over a decade's worth of experience with Dreamweaver and I have a question about setting up my work environment.
    First of all, I have two computers that I mainly work from.  My home desktop computer, and a laptop for when I'm on the road.  I keep all of my web site project files syncronized between the two computers using Dropbox.
    I've noticed that when I create a new project in CFBuilder it stores a few files in my project root like ".project" and "settings.xml".  It looks like "settings.xml" stores information about which CFBuilder web server should be used for the project.  Unfortunately this messes things up for me a bit because on my desktop a web site project url might be:  http://desktop/myProject/ and on my laptop the project url could be http://laptop/myProject.
    The reason this isn't a problem in Dreamweaver is because dreamwevaer stores its configuration/preferences outside of my project folders so I can essentially define any testing server I want for both the desktop and laptop.
    Is there a way to configure CFBuilder to store project settings outside of the project folder?  Or does anyone have a suggestion for someone like me who syncronizes their project files from their laptop to their desktop?
    Thanks in advance for helping out a CFBuilder noob.

    I would recommend using a distributed version control system (DVCS) with a hosted service, such as using Git/Mercurial and Github/BitBucket/UnFuddle.  With Git, you can use a .ignore file to specify files/folders that you want to exclude from being stored in version control (I also exclude my CFBuilder project files from my repositories).  You would then sync your local Git repositories with your service of choice, and they would be accessible from any machine. 
    There are many advantages of using Git and a hosted service over just Dropbox:
    Each computer has a complete copy of the code repository, including all code changes over the history of your project.
    You store code modifications in "commits", or small entries in the DVCS.
    Commits can contain user-defined descriptions that help you identify what you did at each step of your development process
    You can roll back commits if you break something in your code.
    You can create "branches" of your code when you want to work on a specific feature of your application, and that branch is kept in isolation from other branches until you are ready to merge it back into the main production code branch.
    You can have public or private hosted repositories on the various services, enabling you to work with a team or participate in open-source development.
    There are Eclipse plugins available for CFBuilder that provide GUI tools for working with Git and hosted repositories (unless you are comfortable with using the command-line to do all your Git interactions).
    I don't think you can separate the project settings from the project in CFBuilder.

  • Question about Project Lockdown

    I've been reading through Arup Nanda's "Project Lockdown". I understand all of his rationals and procedures, but a few things leave me feeling a bit uneasy. Maybe it's just fear of the "unknown unknowns". In particular is the discussion on changing the unix access profiles for the oracle binaries. I have this uneasy feeling that if I were to implement those particular suggestions, it would end up biting me somewhere down the road.
    Has anyone implemented all of the suggestions in this document? If so, what have been your experiences?

    Arup Nanda_2 wrote:
    Hi Ed,
    Thanks Mark for pointing me out to this.
    I have been using that for more than 8 or 9 years now, without any side effects. But as Emre Baransel reported that although he has been following that without any untoward effects, you should take every advise in the specific context of your environment. I have tried to put all caveats there; but there is no way for me to check all possible comobinations.
    For instance, one of the advises is to remove executable permissions from extjob executable. If you are not using extrnal jobs from the database (99% of people don't), heeding that advise does nothing to your activities. But if you do external jobs, they are broken now. I have made that clear in the article; but I can't be sure if the reader will pay attention to that. But if you don't use external jobs, by changing the permissions you just closed a major vulnerability without applying the CPU patch, which may or may not close all the vulnerabilities.
    Another is the case of nmb and nmo executables. If you are using Enterprise Manager to manage the O/S as well, then changing those executables will no longer allow you to do that. But if you don't do that particular activity (most don't), you again closed a major vulnerabillity without affecting your functionality.
    For anyone who has ever authored anything, one thing is clear - the work is like broadcast, not point to point transmission. Even point-to-point. "If you explain something so clearly that no one can misunderstand, someone will".
    It's not consulting which is situation specific. So, any work which is not prepared in context of a specific situation must be taken with that disclaimer - your mileage may vary. Understanding and testing is a must before committing the work.
    Hope this helps.
    ArupThanks for the response. Besides worrying about the "unknown unknowns" I also have a question about applying patches, especially the quarterly CPUs. Since, at some level, applying a patch is simply overlaying a specific file with a newer version, will this cause permissions to revert to default? Would we have to go through the process after applying a patch? I'll go back and re-read the original doc several more times to make sure I have a good grasp of what's going on here.

  • Question About Project File Location

    I was wondering how important is the project file location when it comes to performance?
    Currently, I store all of my adobe project files(AE, PRP, ENC) on my SSD along with my OS and applications.  
    Btw, I am familiar with the guidelines for disk usage, but cant seem to find anything that has covered this specific question.

    My C:\ is an SSD, and that is OS and programs only.  My D:\ is a fast WD 500 GB Raptor, and is reserved for Page file, My Documents. digital photos, and Video Projects.  E:\ and F:\ are both WD RE4 RAID0s, so all my drives are fast.
    I keep files which are frequently re-written, or replaced, off my SSD to avoid any risk of degradation due to repeated re-writing to the memory. 

  • Question about project manager on Flash CS4

    1 It seems that CS4 can not open flp, so how can I use CS4 to manager a project builded by CS3?
    2 if you choose a folder to found a new project in CS4, when you want to publish the whole project, you need to choose all the fla of that project...that will cost a lot of time if the project includes hundreds of files. But I didn't find out any quicker solution except check every fla by manpower. Is there any solution to publish a project faster?
    I am beginner of both CS3 and CS4, and thank you for anyone who can answer my questions.

    I'm planning on burning 1 master to a Taiyo Yuden White Inkjet Hub Printable 16X DVD-R disc.
    Make a disk image instead. It will be faster than a disc to disc copy.
    I have burnt tons of discs with the setting on "As fast as possible" with a 16x drive and discs. Never a problem. Some say that burning at a lower speed will increase reliability and decrease the chance of turning out a dud. Can't say that I have seen a difference.
    does it matter if I burn first and then print or should I print first and then burn?
    I would burn, check the disc and then print. If you do happen to get a bad batch, that's a lot of wasted time and ink if the discs don't work.

  • Question about project plan value and  availability control

    dear expert：
    I had built a project, and with CJ30, Allocated budget is 10000, in one of  WBS element.
    I created  a network and internal activities,
    when I  assiged a material component (Res + PR) and system can be saved even if the total plan cost value is crossing the budget value.(There is no PR created, now. )
    But, Budget checking is showing error message that budget is exceeded when I created any external service activity and crossing the budget value.(There is also no PR created, now. )
    My question is: what is the difference of the two plan value? Why one is relevant to the budget,and the other is not?
    Note:1) the tolerance limit with ++ (all activity groups), usage say 100% & action 3 (error) to the budget profile. The budget prifile is considered with only overall budget.
    2)In tables COSP, "value types" are all 01 (plan), but VRGNG field values ​​are different, components plan is: KPPE
    Service activities are: KPPP
    3)in CJ30 u2013 Extras>> Availability Control>> Analysis. I could see the following in red colour, these values system not considering into account.
    Entries in this color make no contribution to the assigned value!
    V: Value type not relevant ( Act./Plan/Stat.Act./Stat.Plan/Commt)
    D: Delivery
    S: Settlement to object with no budget control
    R: Revenue cost element
    C: Cost element is exempt cost element
    M: Minimum from actual + commitment and plan per order value update
    P: Plan value is not on apportioned order / network
    B: Plan Costing Single Position
    S: Funds Commitment in Balance
    Following is for material
    COSP 2011 01 8001110100     0000000200 KPPE D RMB             200,000.00  RMB   B
    Following is for service
    COSP 2011 01 8001110400  KPPP D RMB                                10.00  RMB
    regard
    mao jian

    Hi,
    Its not per item category. If  N or L sytem will check the budget if in your system if proper GL's are maintained in OBYC settings BSX and GBB > VBR nad cost elelemtns are created for them. for this you have to cosult with your MM / CO consultant.
    PS is highly inteergratd with CO and all values are updated per cost elements. If values are not updated in cost elements then budget chek wil not happen.
    In you case for material values may be updated in cost elements due to improper OBYC setting so budget check was not done.
    Chekc your OBYC setting and try to create material PR system will check for the budget.
    Check and confirm.
    regards,

  • A simple question about Project

    Hello to everyone.
    I have too much picture in my Aperture library, and some of this picture are also in some project.
    Now i want delete this project for differene requirements, but obviously if i delete project,
    Aperture will delete all picture locate in library.
    This is a very big problem...
    I think can i export ma Project, delete it, and then reimporting image one by one, but in this case i will lost all adjustment, it's right?
    Anyone can help me?
    Many many thanks.
       michele.

    Michele,
    Don't worry about your English; it is better than my Italian.
    You have your organization backwards - "Projects" should be the smallest oganizational element, not the largest. In any case, no Project should hold more than 10,000 images.
    It is probably easiest if you think of Projects the way you would think of rolls of film, cards from your camera, or each day's photos. You can place these Projects inside of Folders which might be months, or years. Projects are the ONLY element that can actually contain images.
    In my particutlar case I use the following:
    Folders: Europe, Africa, North America, etc.
    Inside of these, Folders: UK, France, etc.
    Inside of these, Projects: London, Stonehenge, etc.
    Most of my Projects contain fewer than 100 images.
    To fix your problem, I would suggest that you create new, empty Projects that correspond to each day's shooting, or each trip you have taken, or some, similar event. Now move the images from your one big Project to the various smaller projects.
    Finally, you can group those Projects under Folders as needed.
    Albums are used to reference images, so they are useful for grouping all images of family members, cars, friends, regardless of where or when the original image was taken.
    I hope this is helpful.
    -- DiploStrat

  • Question about project management

    im a newbie of EBS. -_-, now learning PM, facing lots of question.
    can anyone provide the standard workflow and introduction for PM, example of implementing and configuring PM?
    how to define resource?
    thanks

    Hi,
    Can you please check whether you are assigned for project as resource and staffing manager. You need to check this authorisation at project defintion level.
    Please let us more on this if the problem is still there
    Pramod

  • Questions about SCXI products

    I would like to ask about a few SCXI boards.
    1) The datasheet of the SCXI-1102 mentions a maximum sampling rate of 333 ksam/sec.  However, no further details regarding sampling are given anywhere in the datasheet.  I am confused.  Does this board sample or not?  If not, can I use any DAQ board to sample it?
    2) The same question regarding SCXI--1126
    3) The SCXI-1140 is called a "simultaneous sampling analog input."  However, its datasheet does not mention sampling rates or resolution anywhere.  What does this board do?

    Hi Natan,
    All SCXI modules except for the SCXI-1600 do not sample since none of them have an analog to digital converter. Many of them have a multiplexing circuitry inside which allows the channels to be multiplexed together. The scan rates which are listed in the specifications for the modules which you inquired about pertain to the multiplexer. The modules which are housed in a SCXI chassis must then be connected to a DAQ card or a SCXI-1600 for control and analog to digital conversion. More information on how SCXI functions can be found in the Getting Started with SCXI manual.
    The SCXI-1140 utilizes simultaneous sample and hold (SS/H) signal conditioning. This makes the effective delay between channels very small which allows the user to correlate data between channels. More detailed information about this circuitry can be found in the SCXI-1140 User Manual.
    Regards,
    Kent
    Applications Engineer
    Digital Multimeter Home

  • A question about project settings..FCP 7

    I am using FCP 7 and I'm a little overwhelmed with the myriad of project settings options.
    I use a Canon T3i and film in full HD (1920x1080 i think).  All my footage I transcode in compressor to Apple ProRes 422 before importing to FCP projects.
    I installed another computer and reinstalled FCP 7 and lost my old templates and importing some footage, I get the red line indicating unrendered footage.
    Is there a standard setting that Compressor and FCP use to make it easy to just transcode, import, and edit?  I'd like all my projects to look the best possible in full HD and there's hundreds of preset project settings and I'm a little unfamiliar with all the options.
    Anyone have any quick tips, pointers, or thoughts?

    If you drop a clip into the timeline, it means the sequence settings don't match the clip settings.  Make a new sequence, add the clip. FCP should ask "do you want the sequence to match the clip settings?" Click YES. If you don't see that, you might need to trash your preferences...or it might be an older version that doesn't support ProRes formats (FCP 5.1 and earlier).
    Another way is to choose an EASY SETUP that matches your clip settings, and then make a new sequence.
    And your camera shoots 1920x1080p...not i.

  • Very basic questions about video production

    Hi, I've just changed from PC to Mac and I'm feeling a little lost about some basic issues. How do I record my videos on my HD to edit them? I can't even do that!! My beautiful macbook pro plays them perfectly, but there is no option in any menu or tool bar(as far as I know...) that allows me to transfer ithem into my HD.
    Someone HELP me, please!!!!

    Hi claudiaricci-
    Greetings and welcome to the Apple boards
    There is also this: iMovie: Using footage from DV and non-DV sources
    Luck-
    -DaddyPaycheck

  • Question about Project Duration

    I have an iMovie project that is 59:38:17, but after importing to iDVD it is now 62:27. I had the encoding set to "Best Performance" prior to the import. Will the project still look good now that it's over 60 minutes. Also, I was hoping to add a slideshow to the project.

    Best Performance works for 60 mins. or less of QT Playback. In practice it's slighlty less than 60 mins. if other items are added such as motion menus, slideshows, etc. all of which consume additional/available disc space.
    On the other hand I've see a post or two on this forum that claimed they were able to exceed the 60 min. mark by a few mins. and still maintain Best performance settings. Not sure exactly how they did it though...
    I personally try to stay under 57 mins. for Best Performance encoding...and maybe under 55 mins. or less if I plan to add a motion menu, slideshows, etc.
    Hope my reply is Helpful & clearly stated.

  • InDesign & Adobe Digital Content Bundler (Question about this products)

    Hello Everyone!
    I was searching for tools to create interactive presentations to my Ipad and found that creating .issue/.folio files and loading them with Adobe Content Viewer was a great way to do that.
    I just downloaded the trial version of inDesign & Adobe digital content Bundler (from adobe labs) and loved the end results.
    BUT...
    Will this feature be discontinued as a stand alone and only be availabe as a part of digital publishing suite?
    Will I be able  to publish .issue/.folio using only Indesign to create my presentations?
    Just to remember... i DON'T want to publish/sell my .issue/.folio bundles. I would like to create presentations using this tools and manually load them on my ipad.
    Will that be possible?
    Thanks for your time people.

    Yes. You must subscribe to the Digital Publishing Suite. About $500-700 a month to start. There is a lot of pressure on Adobe to knock this off though; Join the fight. I want to publish to Ipad too - but 6-7k a year just for that????? forget it.

  • Question about Win7 product key and Win8 upgrade

    Please correct me if i am wrong .
    I have got the impression that this is a general product key found on the back of many laptops HYF8J-CVRMY-CM74G-RPHKF--****
    if i bought the win 8 upgrade and it activated on my *desktop* (supposing i installed win7 using this key) what does that mean? since this is a general key on many laptops.
    Does it mean that I am legally eligible to the upgrade?

    Hi
    First of all the Win 7 key which you can find on the bottom belongs to the preinstalled image.
    This is Win 7 key. Your Win 7 system was already activated by default
    Now to Win 8 upgrade:
    Visit this Toshiba EU Win 8 upgrade page to get details:
    http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message
    The Win 8 upgrade is available if you have purchased a PC preloaded with genuine Windows 7 Home Basic, Home Premium, Professional or Ultimate between June 2, 2012 and January 31, 2013.
    If your notebook is was NOT purchased between June 2, 2012 and January 31, 2013 you will not be able to upgrade Win 7 to Win 8 but you will need to purchase the full Win 8 version.
    The key would be supplied by Microsoft via mail.

  • Question about 5800 Product Codes

    Hello,
    As I was looking for a Nokia 5800, I found out there are currently 3 different versions of this phone available in The Netherlands.
    These versions are:
    0559066 (EURO2 RED)
    0570026 (EURO2 RED BENE)
    0576907 (Netherlands NL CV R)
    I was wondering what the difference is between these 3 versions, and which one would be the best/most sold one to get?
    I hope someone can help me with this, and suggest which one I should try to get.
    With regards,
    Jeffrey

    The main difference between them will be any country- or region-specific content preinstalled on the phones. I can't think of any example pertinent to the Netherlands, but here in the UK, for example, we have a piece of software called the iPlayer, which allows us to stream or download video content from our national broadcaster, the BBC. The iPlayer software is only preinstalled onto units specifically intended for the United Kingdom. It is not preinstalled onto other European variants that are liable to be sold in the UK.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Maybe you are looking for