Question about The SQL*Plus menu item

The help doc says we can use SQL*Plus commands. So I open it from the SQL*Plus menu item under Tools. After I gave the installed SQL*Plus location and file name, SQL*Plus was opened by itself asking for a password. The question is are all SQL*Plus commands are supported/will be supported in Raptor? Thanks.
ben

See this.. http://www.oracle.com/technology/products/database/project_raptor/sql_worksheet_commands.html
Not everything in plus is supported
-kris

Similar Messages

Questions about the sql developer 2.1

first sorry for my poor english, I am very happy to see the sql developer 2.1.but here ,it has a very serious problem.
usually, I used to saving some common sql statements into a sql file. and when need to do something , I just need to open the file with oracle sql developer, and excute the sql statements.
but when I do this with sql developer 2.1, the excute sql button is not activated , the icon is gray ,so I can't excute any sql statement in the file, and I should open a new sql worksheep and type the sql statements to excute it. what's the matter?
thanks!

When opening a script, sqldev logically doesn't know under which connection you want to run the statements.
Just select the connection you want using the drop-down box in the upper right of the script tab's toolbar, and all buttons will get enabled.
Have fun,
K.

A question about using SQL*Plus

script:
spool c:/abc.bin
select * from abc
when I press ENTER, the result will be orderly shown on the screen.
In fact, I want to input "spool off" to save the result into the file, but I have to wait for the screen finishing its showing.
Which command can I use to directly save the result into the file without showing it on the screen?

Create a .SQL script file with following:
set termout off
spool c:\abc.bin
select * from abc
spool offand then run it like this:
SQL> @your_script.SQLNote that you can do many more formatting commands in your scripts than just shown - which you use depends upon what exactly this output is for.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Short questions about the focused item

Hi,
Short questions about the focused item:
- How can I check if a specific item has the focus?
- How can I check in my code which arbitrary item on my form has the focus?
I need to know this because I have a checkbox and when it become unchecked, I disable an item on my form. But when this item has the focus, disabling this item will fail. Does anyone knows a solution for this problem?
Greetz
Eddy

Hi Eddy!
I suppose you should make an "event trigger" for the event "et_GOT_FOCUS" in your ItemEvent-handler and store there the item, which initiate that event. It can be like following:
SBOApp_ItemEvent(FormUID, pVal, BubbleEvent)
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_GOT_FOCUS)
   strCurrItemInFocus = pVal.ItemUID;
do someth..
if (strCurrItemInFocus == "chbxMyCheckbox1")
   // disabling this item will fail
else
   // disable an item on my form
I hope it helps..

A question about the SPOOL command in sqlplus

Dear all,
I have a question about the SPOOL Command and I would appreciate if you could kindly give me a hand. Consider the following sql script.
SPOOL result.txt
SELECT * FROM mytable;
SPOOL OFF;This works pretty well, and the whole content of the table "mytable" is exported to the text file "result.txt". However, sqlplus prints also the number of lines
printed after each query. As a result, after running this script, at the end of the file, I have always a line like
"20541 lines returned"How can I avoid this line (the number of returned lines) in my result file?
Thanks in advance,
Dariyoosh

Peter Gjelstrup wrote:
Hi Dariyoosh,
As you are about to find out, SQL*Plus is a really powerful tool once the wonders of it are discovered.
You really should study the reference
http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/toc.htm
In your current case especially the SET command
http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/ch_twelve040.htm#BACGAJIC
Regards
PeterHello there,
Thank you very much for your attention to my problem and in particular the interesting links.
Kind Regards,
Dariyoosh

I got an answer and I replied with a question about the answer, does no show in unanswered

I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.

Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

My Bookmarks category on the toolbar has a Trojan Horse logo on four of the drop down menu items.

I have a Mac G5 desktop with OX 10.5.8. My Safari browser was hacked by TH malware, and so I deleted it because it is too old to update to Mavericks.
I am now using Firefox. I see now that the trojan is embedded in my Bookmarks bar, on the drop down menu items. I'm am having trouble resetting Firefox, nor can I get the Malwarebytes that I downloaded to open and run. I have cleared the history, cookies, cache on my computer. I have also deleted Java, MSN, and the old email Mail and its settings from the hard drive.
I'm a low-tech techie. Thank you for your ideas,
svidor

Are you able to give screenshots or other information so we know more about your problem.
*[[How to make screenshots]]
*[[How do I create a screenshot of my problem?]]
I have no idea what the trojan is / was but there have been quite a few reports of pseudo ransomware. This demands money and makes it appear that Firefox is locked up. If you are lucky and have that sort of problem it is easy to get out of.
* see for example this thread [/questions/981475]
If you have book marked sites with malware Firefox provdes you an option to forget about sites that may resolve the issue.
* see [[Remove websites from the Awesome Bar suggestions#w_clearing-all-items-for-a-single-site]]'''_clearing-all-items-for-a-single-site'''

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

Some question about the renegotiation function in SRM Contract (GOA)

Hi All Expert,
We are on SRM 5/4.6, there is a question about the renegotiation function in SRM GOA.
Can we renegotiate the price for some parts in the GOA items with this function ( e.g. Only renegotiate one item in the contract) ?
Will the item price updated automatically after the renegotiation?
Many thanks in advance!!!
Wendrin

Hi Sanjeev,
Many thanks for your help.
One more question, if I add a new item when we renegotiation, will it be transfered to contract and create a new item after that?
Thanks and best regards
Wendrin

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

Question about the MAKZN field in the RBKP table

Hello all.
I have a question about the MAKZN field. Does anyone know what field in MIRO is assigned to this field? We have an issue where a line item amount was not selected invoice was out of balance but the agent selected accept and post. And invoice posted. but I am interested in knowing where the amount if keyed in because when I go to the RBKP table I see an amount entered in the MAKZN (manually accept net difference amount)

Hi,
it seems as if the value was calculated internally:
program SAPLMR1M
dynpro 6000
PAI module fcode_6000
Include LMR1MI3W
*-------- buchen ------------------------------------------------------*
    WHEN fcobu OR fcomanak.
*--- identical code in PAI Module FCODE_6250 --------------------------*
      PERFORM ota_check USING vf_kred-xcpdk rbkpv-xcpdd
                        CHANGING rc.
      IF rc NE 0.
        CLEAR ok-code.
        EXIT.
      ENDIF.
      IF ok-code = fcomanak.
        PERFORM diff_akzeptieren.
        ok-code = fcobu.
      ENDIF.
where:
fcomanak          LIKE ok-code VALUE 'MANAK', " Manuell akzeptiert
*&      Form DIFF_AKZEPTIEREN
*       Differenz manuell akzeptieren
FORM diff_akzeptieren.
*       Manuell akzeptierter Betrag
    rbkpv-makzn = rbkpv-makzn + rbkpv-diffn.
    rbkpv-makzmw = rbkpv-makzmw + rbkpv-diffmw.
*       Differenzbeträge
    CLEAR: rbkpv-diffn, rbkpv-diffmw.
ENDFORM.                             " DIFF_AKZEPTIEREN
maybe it´s happenning when releasing manually the invoice in MRBR?
Best regards.

Short question about the nano controls

Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!

The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens.

Question about The SQL*Plus menu item

Similar Messages

Maybe you are looking for