Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Similar Messages

A suggestion for those with battery issues:

When I first got my iPhone, I had the same battery issues many people here are talking about, in fact I posted about it myself. Its fixed. Very fixed, and Im very happy with my battery life. Here is what I did.
First, do not charge it using your USB connection. At least not always. Why? I dont know. I did the first few days, and couldnt get a full charge even tho system wasnt going to sleep. I started using the wall charger, and got longer battery life, but still not great. One night, I forwarded the phone to my home phone in case I got a call, and shut the phone down completely, and put it on charge. In the morning, I woke up to a 100% charged, fully glowing battery icon. The battery lasted all day with no issues. Every night after that, I just charged it on the wall charger, but did NOT shut it down to see what happened. I am still waking up every morning to a 100% fully charged battery. The battery life seems to get better daily now.
Today, I ran wifi for about 5 hours because I forgot to shut it off. This was after going to the pool and listening to the iPod on the phone for about 2 hours. And using the phone normally throughout the day, checking mail, sms, etc. Really a full day of work, and my battery is still over 50% full. I purposely didnt connect it to anything during the day for a recharge, not the USB or wall charger.
Good luck, hope this helps. Id be interested to know if it does.

Here's my non-scientific experiment.
After surprising battery drain for the first 10 days or so with not much usage, I completely drained the battery yesterday until the phone shut off.
I plugged into AC charge and was worried when it didn't seem to even begin charging.
I plugged into USB, assuming it needed to charge enough to at least complete a sync.
I left it on USB until about 5-10% charge, then switched it to AC. At about 50% I needed to use it, so I did but sparingly, and put it back on charge, all the while keeping Mail on manual and WiFi off.
I took it off once more to get it home from the office, then plugged into AC.
I left that charging overnight.
I never actually got the "glow", but did get the plug icon showing full charge in the status bar.
After about 2 1/2 hours this morning, the status has not moved off of 100% (but with little usage as before).
This is definitely an improvement already though. Hope this helps.

Question for those with a Venture & a Venture One

Has anyone apped for both the Venture One and Venture at the same time? What were your starting limits, and were you approved for both? (or approved for one and declined for the other?) I have a Venture One with a 3k starting limit. I've heard both cards have the same underwriting, so I might have a chance at the regular Venture as well? I'd love to try for that and then combine the limits six months from now. One other question: My Eq is my lowest score, and on my Venture One approval letter they had it listed even lower (637). I've heard some have had luck apping with Eq frozen... would it be a good idea to do that before I app again, and is the freeze immediate if I do?

perfectlyflawed wrote:
Has anyone apped for both the Venture One and Venture at the same time? What were your starting limits, and were you approved for both? (or approved for one and declined for the other?) I have a Venture One with a 3k starting limit. I've heard both cards have the same underwriting, so I might have a chance at the regular Venture as well? I'd love to try for that and then combine the limits six months from now. One other question: My Eq is my lowest score, and on my Venture One approval letter they had it listed even lower (637). I've heard some have had luck apping with Eq frozen... would it be a good idea to do that before I app again, and is the freeze immediate if I do? Is there a reason to rush? Venture isn't going anywhere...let the Venture One age, show a history, then you can get a Venture later.

Question for those with G5 Quad and either X1900 or 7800/Quadro 4500

Just wondering...when you upgraded your quad to one of these high-end options, did you notice the Leopard desktop feeling more responsive/smooth? Specifically, window resizing/moving, etc.
I've tried all the hacks such as setting deferredupdates to 1 and 0 and enabling/disabling QuartzGL with the original 6600, but sometimes the desktop is still choppy sometimes. I'm hoping this would be improved with one of the many 7800s or FX 4500s floating around on ebay and such, and I would think that even an "ancient" quad G5 would have more than enough power to make Aqua smooth...
Before I drop $400 on one of the upgrades, just wondering if anybody noticed improvement in desktop snappiness. Thanks!

Thanks for the reply! Yes, I have considered replacing the HD (looks to be a very early SATA 7200rpm Western Digital, with no NCQ support, etc.) But it seems to me that the slight choppiness has little to do with disk access....bear in mind I am running 16GB RAM as well, so that should cut down on disk paging. It does seem like the graphics card being overloaded with say, a graphics heavy webpage, when minimizing to the dock, its just not "smooth" at times, if you know what I mean, and neither are the bouncing icons in the dock.
Also, I am running Leopard 10.5.8 so perhaps you dont see this issue with Tiger. I've heard Tiger feels snappier on G5s than Leopard.
However, if anyone else has experience with a quad/7800/X1900 upgrade, and if you noticed Finder/Aqua being more responsive, I'd like to hear it.

'Genius' related question for anyone with over 1.2TB of music?

Anyone out there with a iTunes library with over 1.2TB of music?
Reason I ask, is that I've not been able to solve a problem in updating Genuis - I'm getting the error - 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' or the 'unknown 4002 error'. The steps I've taken to try and correct sometime back can be found in https://discussions.apple.com/message/12584815#12584815 and also shown here in sequence below.
I keep thinking this will be fixed with the next version iTunes but so far with the latest, things still the same. So looking to see if anyone with a similar size library is having similar problems and it just a limitation of the program or it's something specific on my end that I can fix.
Appreciate...
Up to this weekend I've had not issues with Genius. Worked beautifully and updated last Sunday as I have been doing every week since Apple added Genius. Yesterday I added a few albums and went to update and now getting the error of 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' Now my library is well over >200,000 songs and only added 6 albums this time. Music sits on a external 2TB drive ~100GB free and my MacBook Pro has over 60GB open. Running latest Mac OSX and latest iTunes. Nothing new installed or changed since last Genius update.
To the points raised in this thread.
1. I've been updated weekly with a Library with over 200K songs till now with no problem. Majority is what I've ripped from my albums & CDs.
2. Deleted the albums recently added since last successful update - same result.
3. Connected directly to the network bypassing router as suggested here - same result.
4. Reinstalled iTunes program - same result.
5. Repaired permissions - same result.
Problem remains. Welcome any additional thoughts.
Question for anyone with a music library
https://discussions.apple.com/message/12584815#12584815
Ok, tried all the suggestions here yet the problem remains.
In addition what I posted above -
1) Dumped the cookies in user/library/cookies folder
2) Deleted the apple cookies found under Safari Preferences "Show Cookies"
3) Repaired disk permissions
4) Deleted iTunes Library Genius.itdb file
5) Reinstalled iTunes (with the new 10.1 version)
6) Restarted computer
7) Rebuilt iTunes Library folder http://support.apple.com/kb/ht1451
8) Deleted all iTunes dead tracks
http://dougscripts.com/itunes/scripts/ss.php?sp=removedeadsuper
9) Increased internet access speed
10) Removed all open "[" and '}' brackets from songs, albums & artists
10) Rebuilt my entire library from scratch!
Is there anyone out there with over 200K songs that can update their Genius? One thing I noted is the genuis.itdb file is just over 2GB. I'm wondering if there is a maximum size on this based on the error I'm getting. Any thought or know info on this?
Ok, think I may have found something here with this. I backed out all the music added prior to this problem occurring and ran the Genius update. All worked fine. I then started adding the music back little by little (running the update each time) until the problem returned. When the problem came back I ruled out the specific music added by backing that bit out, verified all was ok and added a different batch back in.
Bottom-line it appears that when my library exceeds exactly 1.208TB the problem appears. Interestingly enough it does not appear to be related to the number of songs, the size of the genius.itdb file (in fact when it was working the file was at 2.25GB - larger than what I reported before). It specifically seems to be related to the size of the overall library - when I have it for example at 1.2079 all is ok, 1.2081 it fails with this error.
I did try moving the library and related files to the external drive but same result. abavetta, I think your suggestion of this script may be a workaround for now - although from what I read, is this not the same that you can do anyway with iTunes by holding the alt/option key open start up? In fact I do have two libraries now - one with the 2TB drive which I use at home and another for 2x500GB disks I carry with me when i travel. I just reported the same back to Apple but doubt if any immediate solution will come for this. Too bad as one of the great things about having such a large library is the mixes you can generate via Genius. Anyway, such is life and will just live with this for now. I also just found this program called Tangerine! http://www.potionfactory.com/tangerine/ which creates playlists like Genius - although through a different technique I might also take a look at.

Just to let all know that may be having a similar problem, what I found by accident to fix this problem.
Reset all my Home Folder permissions using the resetpassword method from the startup utility in Lion. Then turned off/on to reset Genius and cleaned out the cache folder for good measure. Finally after more than a year without, have Genius up and running again.

Post Moved for-those-having-wifi-issues

Moved http://community.bt.com/t5/Other-BB-Queries/for-those-having-wifi-issues/td-p/803138
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

might be lack of sleep but you've lost me there lol
not the first device? the modem, but the HH3 via wifi, I thought it was the HH3 broadcasting the wifi signal and what you connect to?
upped the youtube playing videos to 35, also on wifi, not a single problem, 1 hr, hope I don't get a call tomorrow lol about high usage, all in the name of science!
with the ipad and iphone, normal usage, not seen a single drop in wifi connection, seems to be when the device is being heavily used, with playtube, it converts and downloads the youtube video to play offline on the device
playing seems to be fine, just when downloading when it has a problem

Some dvi questions for those who really know there stuff!

Hi all, haven't lurked these forums in a few weeks but just had a quick question for those who wanna build up some "points". I'm trying to connect my MBP 15" (1.83ghz) to my Dell LCD 26" T.V. via DVI. Anyhoo, the DVI port on an MBP is a DVI-I (Dual link 24 + 5 pin) fenmale port while my Dell LCD sports a DVI-D (Dual link 24 + 1 pin) female port. Anyhoo, I went to my local Circuit City store and picked up a 6.6ft DVI-D (Single link 18 + 1 pin) male cable to hook both devices up. Should this work? If those have no idea what I'm talking about, I've included a link with a picture of allt he different DVI ports:
http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/Dvitypes.png/180px-Dvitypes.png
If I haven't explained myself well, please post and I'll do my best to clarify.

Am I missing something? Do you actually have a problem making this work? If the plugs you chose are mechanically compatible (and both are DVI D, dual-link), then there should not be a problem.
Ah. I see the concern. The extra four pins. I believe they make the connector able to supply hybrid DVI-A and DVI-D. The Mac output is hybrid so it can easily be adapted drive a VGA monitor, too.
I think you should be fine.
I have a ViewSonic 1600x1200 LCD monitor with a DVI (single) and it works superbly with the Mac.
RRS

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

How do I send my pages attachment so that it will open for those with Microsoft word?

How do I send my pages attachment so that it will open for those with Microsoft Word?

Hi Victoria,
Pages does not run on Windows.
Word cannot open a Pages file.
If you want someone without pages to be able to open your attachment, you will have to send it in a format openable on the recipient's computer.
If the recipient needs only to read the document, the most universal format is pdf. To send a pdf copy of your file, press command-P to open the Print dialogue, then click the PDF button and choose email PDF. This will open a new message in your default email client and attach the pdf file to that message.
If the recipient needs to be able to edit/change your document, and has MS Word, then either Save a copy as a Word file or go File > Export and choose Word as the file format for the export.
Be aware that MS Word does not support all features of Pages (and vice versa), and that formatting of the document may be affected by font substitution if you use fonts that are not available on the recipient's machine.
Regards,
Barry

Is the i phone any good for those with essential tremour

is the i phone any good for those with essential tremour

Hi auchenshugglegranny,
Welcome to the Support Communities!
The iPhone has a number of accessibility features that may be helpful to you, including Siri, which will accept voice commands. The article below will provide an overview for you.
Apple - Accessibility
http://www.apple.com/accessibility/
Below is a list of features included in the iPhone User Guide:
Accessibility features - iPhone
http://help.apple.com/iphone/7/#/iph3e2e4367
VoiceOver
Support for braille displays
Siri
Zoom
Invert Colors
Speak Selection
Speak Auto-text
Large, bold, and high-contrast text
Reduce onscreen motion
On/off switch labels
Hearing aids
Subtitles and closed captions
LED Flash for Alerts
Mono audio and balance
Call audio routing
Assignable ringtones and vibrations
Phone noise cancellation
Guided Access
Switch Control
AssistiveTouch
Widescreen keyboards
Turn on accessibility features. Go to Settings > General > Accessibility, or use the Accessibility Shortcut. See Accessibility Shortcut.
Use iTunes to configure accessibility. You can choose some accessibility options in iTunes on your computer. Connect iPhone to your computer and select iPhone in the iTunes device list. Click Summary, then click Configure Accessibility at the bottom of the Summary screen.
Hope this information helps ...
Happy Holidays!
Judy

Good day, I forgot to answer the security question for shopping with my account, how can I recover them?

Good day, I forgot to answer the security question for shopping with my account, how can I recover them?

1. See my User Tip for some help: Some Solutions for Resetting
    Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for
        support and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

Msi k8n neo plat and microsoft ie

getting my msi k8n neo plat board running satisfactory , except for one problem . when i got to amdmb.com, i start surfing the site, and after a minute or 2, i get a microsoft ie error, send the error report to microsoft, and then ie closes. what is the problem , is it with amdmb.com site? its the only site that this problem with ie is present, all other sites i don,t have this problem

just tryed using the browser firefox, and it works great. its just ie that doesn,t work on amd.mb, and only that site. wierd problem, never experienced anything like it before. had run a short memtest , no errors. the 6800gt , msi k8n neo plat and amd 64 3400 work great. get some super madonion benchmarks-all default-1024 x 768 32bit- 22,755. i was hoping for 22,000, but exceeded my expectations. can get into the 23,000 + with overclocking the 6800gt, have had it overclocked at gpu-412, memory 1.12. not sure how much more you can increase the numbers, thinking my gpu is close to the limit at 412.had a problem with windvd, it ended up being a configuration in windvd- had to enable hardware acceleration , bingo- worked great after that. got my corsair xms pc 3200 to work at 6-3-3-2 timings. still getting to know the board, there is definately a learning curve to be delt with on this board, but i am getting it to work better by the day.

Overclocking msi k8n neo plat

trying to overclock my msi k8n neo plat and run mad 2001
hardware - amd 64 3400
bfg 6800gt
corsair pc3200
i go into bios and set ram at 400mhz, set agp at 67 mhz. then open center and enter 210 mhz fsb. when i start madonion, it freezes. is it my memory?

Could be a ram incompatibility issue. I have some OCZ pc3500 EL which is great in my other systems, but doesn't work in the Neo without bluescreens and crashes to desktop. It might also be a power related issue. What type of power supply are you using and what is the amperage on the 12v rail? That seems to be pretty important for this board.

Msi k8n neo plat : blue screen

hi
just built a amd 64 3400 with msi k8n neo plat: with xfx 256 geforce nvidia graphic n kinston 512 ddr 400.
but for some reason its giving the blue scree with dumping memory msg on the screen.changes the memory but still got the same problem updated the bios to 1.5 still same thing.
any cue with the problem.
thnks

Duplicate Thread
https://forum-en.msi.com/index.php?threadid=72851

Msi k8n neo plat nforce3 250gb : blue screen

hi
just built a amd 64 3400 with msi k8n neo plat: with xfx 256 geforce nvidia graphic n kinston 512 ddr 400.
but for some reason its giving the blue scree with dumping memory msg on the screen.changes the memory but still got the same problem updated the bios to 1.5 still same thing.
any cue with the problem.
thnks

System restore? You need to find out what's causing the problem and you have too many things connected to it to be able to figure out what it is, always start with a basic system - video, primary hard disk, cd + fdd, no more and nothing else connected. Then when something goes wrong along the way you'll have more chance of narrowing it down if the problem appears.
What you'll want to do now is disable/uninstall/unplug any additional non-system-critical components that you have connected to it such as extra usb slots, printers, scanners and anything else. Keyboard, mouse, video with no sound and see if the problem persists. If it does, try another video driver. If it's fixed then reconnect/enable one device and try again until the problem reappears and you can find out what's causing it -- unless you can speed read that message quickly before it shuts down
Now that I think of it, have you set the OS to not automatically reboot on any errors? That might keep the BSOD up there so you can note it down and hopefully point at the problem instead of going through all the above hassle ^^

Question for those with memory issues on k8n neo plat

Similar Messages

Maybe you are looking for