Question/help with my WRT54G

So I've had this router for a long time now, and I'm still on v1.01 firmware. Tried to update to the latest, and I kept getting an error (Upgrade are failed) is what it says. Also, I try to add thing to the port forwarding list, and it says that it is complete but then when I click on okay and go back, all the stuff I just entered in is gone. Any ideas? Thanks!

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & check out it will definately work!!
If this works fine!! if not you need to logon to ftp.linksys.com & download the tftp.exe file on your desktop & then try upgrading the firmware & it should work then.Also, for port forwarding click the Applications & Gaming & do the port forwarding & then click save settings & do a complete power cycle & it will definately work!!!

Similar Messages

Need help with a WRT54GS V5.1

i need help with my WRT54GS V5.1 wireless router. it cannot connect to the internet and i don't know why. at the moment i have to use an ethernet cable coming from a virgin media modem. information that might be usefull. one of the antennas on the router is broke i am using windows vista on a toshiba laptop. the model is WRT54GS V5.1 thanks for people who help note: i am only 13 so somethings you say i might not understand.

Access Setup page of router .....
Click wireeless tab .... have a note of the wireless settings on that page .... Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Help with the WRT54g

Hi, I have been having trouble with my internet connection ever since I purchased a PC running Windows Vista Home Premium (32 bit). I have a total of 3 PCs an Xbox 360 (all wired) and a Wii on the wireless. I have never had any problem with the internet connection until I connect the PC running Vista. If I unplug the computer running Vista the other connections run great. The interenet will run for a long time in some instances but will at other times disconnect every few minutes. I have tried searching google for solutions, called HP support and Linksys support and no one has been able to help. The Wrt54g v.8 is brand new, just bought it about 3 weeks ago after the last one died. I have made sure that all firmware is up to date. If anyone has any advice that could fix this annoying problem I would appreciate it. Thanks a lot.

Gollum wrote:
Try this setting;
Wireless channel -1 or 11
Beacon Interval – 50
RTS & fragmentation threshold – 2306
Let me know if it works.
Thanks, I changed the settings, and I already had the MTU set at 1400. We will see if that helps. Thanks again for the replies

Need some help with linksys WRT54GS

Hi, I'm new to networking and am having troble connecting to the net when I add the WRT54GS. I have followed this procedure, from Linksys, but -no luck. No help from Cust. support line and no included manual.
Here's what they had me try:
Rique (22312): Please follow these instructions in configuring the router for a Cable
connection:
- Press the rest button of the router for 30 seconds.
- Connect the modem to the 'Internet" port on the router.
- Connect the computer to port no. 4 on the router.
- restart the computer.
Then access the setup page of the router:
1. Launch Internet Explorer.
2. Erase everything in the address bar.
3. Type '192.168.1.1' on the address bar, then click 'enter'.
4. A box will appear, prompting you to enter 'username and password'.
Just leave the 'username' blank and on the 'password', type
'admin', Then click 'enter'.
5.It should display the setup page of the router.
Under the 'setup' tab, for the 'Internet connection type', select
'Automatic Configuration or Obtain an IP automatically'.
Then change the Lan IP of the router from 192.168.1.1 to 192.168.2.1. Then after that, click on 'save settings'.
Then do a power cycle:
POWER CYCLE:
1. Turn off all computers ( wired and wireless)
2. Turn off the router (just unplugged the power chord at the back)
3. Turn off the modem
- Wait for one minute, then:
4. Turn on the modem ( wait until the LED lights on the modem becomes stable)
5. Turn on the router (wait until the power light becomes solid)
6. Turn on the computer.
7. Try if you can go online.[
This hasn't worked. Any help?
G-5 dual 2.5 Mac OS X (10.4.6) 2.5G ram

I'm currently online with a DSL modem connected to Ethernet and set up for PPPoE. This connects fine until I add the linksys to the mix. Are there addional changes that I must make?
connect your dsl modem to the internet/wan port of the linksys box.
connect your mac to one of the four network ports on the linksys box.
Goto your system preferences-->network>location-->new location
give your new location a name of your choosing such as 'Home Network' click ok
Then click 'Apply Now'
now goto http://192.168.1.1
login in with admin and admin
then on main setup page select PPPoE from the drop down menu and then scroll down the page and enter your isp username and password. Then save the settings.
That should do it. Once this is setup you no longer use the PPPoE client on your mac to engage the connection the router does that for you.

Need help with my wrt54g v8

So i seem to have gotten myself into a pickle. I am using the wrt54g v8 router which works fine but i needed to update the firmware, so i tried to access the router setup web page 192.168.1.1 however i could not do so from the computer connected to the lan line. ( the modem is a netgear hybrid router and i seem to only be able to pull up the netgear router on the lan settings) so i tried to update the firmware with a computer connected to the linksys router wirelessly and the firmware update started, however it ended mid update and now i can no longer get a signal from the linksys. can anyone help me undo this and get the firmware on my linksys router updated please.

What is the ip address you are getting on the computer...?
Which operating system you are using on the computer..?
Make sure that Power light should blink when you press the reset button on the router...Hard-reset the router for 45 seconds,power cycle the router and then,check the ip address you are getting on the computer connected to the router.
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,Adjusting Browser Settings.... Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Now try...You can also try with the different computer...

SD certification questions - Help with answers

Dear All,
I am writing my certification exam tomorrow. Please help me in finding the answers for the below questions.
1. Can i have multiple condition records for a condition table?
2. Can two condition types share a condition table?
3. What happens to the value of the condition type which is marked for both the header and the item simultaneosly?
4. Can an access have multiple condition tables?
5. Can i specify 2 source fields for a field within a condition table?
6. Can i change the activation type during the creation of a condition record to a different one thats set up in the condition type?
7. Where are the tax codes defined? and for which entity/level?
8. How are tax codes assigned to a country?
9. Can i create sales deals without reference to a promotion?
10. Can you do picking in the order? if so how?
11. What are the possible transportation.plan.stats?
12. Can the shipment be created automatically?
13. What happens to the material listing/exclusion if payer is different from sold to party?
14. Can we do free goods dtermination in deliveries?
15. When one picks a delivery, does it update the order item status?
16. Are transportation planning points connected to loading points?
17. How transportation planning point and shipping point connected?
18. What are the packets in which SAP transmitts information, called?
19. Are there any blocks possible at the schedule line level?
20. Can we enter a sub-item in the higher level item field in the delivery?
21. Does item category determination in delivery take into account higher level item category also?
22. Can one condition type have multiple access sequence?
Regards
Prasanth

1. Can i have multiple condition records for a condition table?
Yes. This is possible as we can maintain future change in price in advance.
2. Can two condition types share a condition table?
Yes.
3. What happens to the value of the condition type which is marked for both the header and the item simultaneosly?
Item level has precedence.
4. Can an access have multiple condition tables?
Yes.
7. Where are the tax codes defined? and for which entity/level?
Tax Code are defined in Transaction Code: FTXP
8. How are tax codes assigned to a country?
It is done in Excise Setting.
10. Can you do picking in the order? if so how?.
No. It is done in Delivery.
12. Can the shipment be created automatically?
No.
13. What happens to the material listing/exclusion if payer is different from sold to party?
It will be based on Sold to Party.
15. When one picks a delivery, does it update the order item status?
Yes.
19. Are there any blocks possible at the schedule line level?
Yes. Delivery Block
22. Can one condition type have multiple access sequence?
No. It can have only one Access Sequence. Header and Manual Condition Type do not have Access Sequence.
Regards,
Rajesh Banka

Can anyone help with a WRT54G connection issue - it just stopped working

I have a Dell running Windows XP. I have a DSL connection with a Westell 6100 modem connected to a Linksys WRT54G router connected to my main computer. I use the router for a wireless connection to my laptop. This setup worked fine for years - until a few days ago. I no longer have internet access on my laptop and main computer.
If I connect from the modem directly to the main computer, I have internet access. But as soon as I put the router back in - I have no access.
All the appropriate lights on the modem and router are lit. When I do try to access the internet I get the dreaded PAGE CANNOT BE DISPLAYED. When I run the diagnostic, the error log shows: "Not all base service provider entries could be found in the winsock catalog. A reset is needed". I don’t know if this is a standard catch-all error or not?
Everything was fine until a few days ago when I just lost access. Do I need a new router? I hate to buy one and then find out something was corrupted on my computer instead. :-(
Thanks!

When connected from modem to PC directly (no router) and I type in ip[config /all (don't know if this is what i should do) -- I get:
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DHCP Server 192.168.1.1
DNS Servers 192.168.1.1
Does this mean I should try to change the LinkSys Router?
I will go look there next.

Help with install WRT54G

i just purchased a WRT54G v6 router peice after getting my new laptop... but i have ran into some issues getting it to work with internet ... to be more specific, i can connect to it (the router) no problem ... but i can not view any webpages... (it has firmware v 1.01.1 if that matters)
my ISP is bellsouth DSL service
with a westell modem c90 610030 06
this modem has the advanced config options locked out so i can not check it to see if it is running as a DHCP server .. but i beleive it is (from viewing the source code for the advanced html page) ...
i can connect to the internet fine when the modem is hooked directly to my computer, and i can connect to the internet fine when my modem is hooked into my other linksys router (BEFSR41)
i tried to configure the new wireless router to the 'router' setting instead of gateway .. but had no luck and had to reset it completly to be able to even connect to the config page again ...

an update, i have it kinda working .. but would still like to resolve the issue on why i can not use the new router by it's self
how i have it working right now ... i disabled DHCP on the new peice, and assigned it a different IP addy that was out of normal range (192.168.1.200) and just plugged a cable between the two routers ...
and disabled DHCP on the old peice ... now all of the computers work on the internet ...
my laptop, wirelessly ... and my two wired computers ...

Help with a WRT54G

The computer I was using recently died and i built a new system with Windows 7. Is there a place that I can download the software to control the router that is Windows 7 compatable.. The software that shows you what devices are connected to the router and so forth. I know it is an old router but it is working like a charm, I just don't have the software to get into it on this new computer. If anyone can help please respond.

There is no software to control the router, not needed. No drivers either. Simply go to 192.168.1.1 with your browser username blank, password 'admin'. Now configure your router.

I need help with my WRT54G

I have two wrt54g routers. The first one (RA) is connected to the modem and the computers. The second router (RB) is connected to my Direct TV HD-DVR (DVR). The DVR says it's connected to the network but not the internet. Please help.
Thank you,
Steve Zandman

Try asigning a static ip to the computer in the range of the router & it should work properly.

I need help with my WRT54GS router.

My WRT54GS linksys router is acting up pretty bad. For example, i am just surfing the web and i have a program Ventrilo going talking to some friends, then all of a sudden i get disconnected from it and my internet just suddenly halts and then reconnects in a mere second or two. it also does this in the middle of me playing my online games. I have done every solution that i thought would remedy this problem, getting an ethernet cable, reinstalling Linksys, restarting my modem and router, changing my internet's security, reinstalling vista on my computer, EVERYTHING. I am not alone in this, my brother, plays the PS3 online, and my other brother plays a computer game on his computer. Anyway, while we are all doing our things on our own computers, we all get disconnected from the internet at the same time and it happens pretty frequently about once every 10-12 mins or so. Is anyone having the same problem, or does anyone have any ideas/solutions to this problem?
Message Edited by Vaun1992 on 02-23-2009 03:02 PM

You need to reset and re-configure your router to see if that makes any difference...Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If you still face the same problem you should try to upgrade your router's firmware...
Download the Firmware from here ,
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If you still face the same problem you should connect one computer straight to the modem and check if you have stable internet connection or the same problem re-occurs...

Need Help with the WRT54GS

I have a Wireless-G Broadband Router Model- WRT54GS. I have been trying to get it to work for weeks. At one point it did work. It tells me that the EasyLink Advisor did not detect an active internet connection. But yet I am connected or I wouldn't be on here. On my laptop it shows the wireless connected but I can not get on the internet.

On the lap top check for the IP address you have then ping the gateway address if you are getting replies then ping the DNS 4.2.2.2 and post the results.

Need help with my wrt54g

i'm trying to host games on my ps2. when i try to forward ports i go to the ip address in the browser search bar and when it ask me to put in username and password i put the default in admin. and it doesn't except it. i have held the reset button for a whole min. i even tried to reinstall the router and it ask for my password and my password doesn't work for that. can anyone please help?

Try resetting it harder, make sure when you press reset button, the power light of router blinks(which is solid otherwise), keep it pressed for 1 min, and let the power blink all the time.
After this turn off router and turn it on after 1 minute.
Now try to access setup page from a computer wired to router, and admin password should work.

Help with simple OS upgrade and backup questions for a dumb old previous PC user...?

Ok...have mercy on me, please...
I am not completely dumb, I know typical board etiquette, and I have searched for various answers (and found many)...but I just want to confirm my personal "research" and get all of this clear up before I proceed with this insanity. I know I could probably search more, but this is taking hours, because of all my various questions, one leads to 10 more...
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
My main goal: install an app that was in the Mac App store.
However, with Leopard, I can't access the Mac App store with Leopard, apparently.
I click on the Mac App store, and up pops up a Lion advertisement...telling me I should upgrade. Ok, fine...probably a good idea, anyway...
But how do you upgrade to Lion? Apparently through the Mac App store!
The web-redirects on the Apple site are amusing...taking me on an endless cycle...purchase Lion in the app store...click..."you need to upgrade to Lion"...OK...click..."you need Lion at the app store"...OK...click..."you need to upgrade to Lion to get to the app store"....etc.
OK...fine...google searches...ahh, I need to upgrade to Snow Leopard first, apparently! Yes?
(Maybe the Apple redirects should detect that I have Leopard, and direct me to a screen that explains that I must upgrade to Snow Leopard...and then Lion! Do you hear that, Apple? Thanks.)
Anyway...so here's my plan:
1) Upgrade to Snow Leopard
2) Access the Mac app store
3) Upgrade to Lion
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes? Is this a dumb idea, even if "OK"? I know that "minimum requirements" on a PC often meant: "Well, it will work...but it will be slower than a snail and crash if you run 5 programs at the same time" (which I usually do...) I don't want to upgrade if the "minimum" is really not enough.
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
= = =
Next:
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Anyway...so, my iMac has Time Machine. I am pretty ignorant about this, and based on my previous PC backup program nightmares, I have a distrust for it...and don't really understand how it works. But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C...
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files. My wife and I both access the computer, so two user accounts. Does Time Machine really do a good job backing up everything and all things? Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine? Anything for me to "watch out for"...or to do when I buy a new external hard-drive and setup up Time Machine for the first time on it, in order to make this work well? Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
Thanks for any sincere help.

yachadhoo wrote:
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
Apple has discontinued support for 10.5, it's a plaque of our platform that Apple only supports the last two operating systems in circulation.
Where as on Windows you can run the same OS version for 10 years and get updates free (if not stolen), on a Mac we get one year, two tops now and if you don't upgrade and break all your third party software and hardware drivers in the process, then your denied security updates.
On top of that, the OS X upgrades tend to break your older hardware too, or slow it down so much that it drives you to want to buy newer hardware.
It's funny Apple places the AppStore on your OS X version along with iTunes and Safari updates, but then doens't supply necessary security updates, your machine may be compromised and here you enter vital credit card info, banking etc. thinking you have a secure machine.
My advice, since that's a 10.5 era Mac, is to upgrade to 10.6.3 via this disk, then use Software Update until clear. You'll get security updates and your present installed 10.5 software will work in 10.6 using Rosetta.
http://store.apple.com/us/product/MC573Z/A
Rosetta is not avaialble in 10.7 so it could be a lot of your software will no longer function
http://roaringapps.com/apps:table
I don't see the sense in you buying all new software for a machine that's at it's end of life stage.
You can buy software in the AppStore with 10.6.
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes?
You will need to buy 4GB of RAM to run Lion well, the 2GB is just a bare minimum, and your processor is a bit dated.
Lion 10.7 is certainly slower than Snow Leopard 10.6, in fact so many wanted to go back to Snow Leopard and one of the resons was Lion was slow.
So I wrote a User Tip, here, but the Tips were implemented only recently.
How to revert your Mac to Snow Leopard
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
RAM is easy, you can buy it at Otherworld Computing or Crucial.com and install it yourself, there is a little door under the monitor.
Videos online at YouTube.
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Mac'soperaing system is seperate, it can be replaced or upgraded indepentantly of programs or user accounts on the machine.
There are some programs that install a kernel extension file at boot into OS X, those get knocked out, but those can be replaced with a new install of the software.
You should always backup your users files as those can't be repalced.
 Most commonly used backup methods explained
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files.
OS X upgrades dont' affect User accounts but they can have a affect on programs installed, which most of your 10.5 programs likely will no longer work in 10.7
However they will (with a slight update) work in 10.6 just like before.
You need to backup regardless, I suggest a manual backup of users files to a storage drive, a 10.5 clone on another drive, the your ready to upgrade to 10.6
10.5 to 10.6 upgrade is rather painless, also 10.6 gives accelerated video drivers, so your machine will appear faster.
However once you install 10.7, you will slow down.
Does Time Machine really do a good job backing up everything and all things?
No, you shouldn't rely upon TM, have a multiple backup stragedy, TM files are hard to access directly.
Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine?
No need to restore, OS X upgrades and leaves everything else in place, just some programs (with 10.6) or a lot (with 10.7) when you try to launch them they will fail.
Also when you connect TM it will do a substancial change to reflect the new boot drive.
If you were using TM as a "storage drive" thinking you can use the archived versions later, that wil change upon the new OS X upgrade.
But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C..
You need not only TM drive, but a bootable clone and user files on a storage drive.
 Most commonly used backup methods explained
Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
No, depending upon what OS X version you stop at depends how many programs no longer work.
You will have to buy a lot of new or upgrade versions with 10.7, not so with 10.6 only updates mostly because of Rosetta on 10.6 and not on 10.7
My opinion, since that machine is a bit dated, is to upgrade to 10.6, Software update to 10.6.8, and stay there.
Later on 10.8 is being released after this summer, you may want to consider getting a new machine with 10.8 a few months later to ensure all the bugs are worked out of it.
Your not a comptuer savvy person, you like most Apple users expect your machine to "just work" I think going to 10.7 will be a bad experience for you.
10.6.8 will server your needs until 10.8 is released and on new hardware where Apple will hold your hand for free for three months, 3 years with AppleCare.
Your not a "OS X upgrader type of a person" and Apple needs to get of thier collective assets and pay better attention to it's most common users.

I need help with Changing my Security Questions, I have forgotten them.

Its simple, I tried buying a Gym Buddy Application and I had to answer my security questions... Which I have forgotten I made this a while ago so I probably entered something stupid and fast to make I really regert it now. When i'm coming to this...

Hello Adrian,
The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article for assistance with resetting the security questions:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

Question/help with my WRT54G

Similar Messages

Maybe you are looking for