Question on "Get Reporting Statistic" and If statement issue

Hello
I worked up a "Get Reporting Statistic" in my script that looks for agents that are in the Not Ready state.
Report Object:    CSQ IPCC Express
Field:     Not Ready Resources
Row Identifier:    Queue_Name
Result Statistic:    Not_Ready_Resources
I have an If then statement:
If(Not_Ready_Resources <1) then
True - go to a prompt
False - go to the queue
It seems like this is behaving backwards. When I am logged in on my agent it seems to follow the True step which it should go to the queue. When I am logged out it goes to the false step, to the queue.
Any thoughs on why it would behave backwards?
thanks

Apologies, replying via the email interface is a bit annoying.
Your code is a tad confusing to begin with. Why are you checking to see if there are people in the not ready state before trying to queue?
Instead a cleaner flow would simply queue first, play the prompt and any other actions in the queue step. This way your person is immediately placed in the queue and if someone is available they go straight to them otherwise they will hear your prompt. If I am understanding your code properly, the if statement is unnecessary.
Regardless, why are you checking for agents not ready? (I'm honestly curious). Is there something more specific that needs to happen if an agent is not ready? Otherwise, your flow should be checking for Agents in the ready state
if(Agents_Ready > 0)
     true:
          queue
     false:
          prompt
but again this is entirely irrelevant considering:
Select Resource Step
     queue:
          prompt
          // no available agents
     connected:
         //agents ready
Perhaps I am completely misunderstanding? Apologies if that is the case.

Similar Messages

Get Reporting Statistic - Not Ready Resources

Hi All - I have a script that currently checks for LOGGED IN agents .. If there are none, it goes to a voicemail. We have agents all over the globe and unfortunatly some stay LOGGED IN, but in a NOT READY state. Therefore the call goes into queue, and not routed to the voicemail.
Does anyone know, if I change the "get reporting statistic" to look for NOT READY agents, vs. LOGGED IN agents, does it consider agents on a call "not ready"? Or will it look for agents that specifically put themselves into a NOT READY state?
Thanks
Jeff

Hello Jeff, the agents on an active call will not count for the Not Ready state. When receiving the call (ringing) they will be placed in Reserved state; while the call is connected they will be in Talking state and after the call ends they could be placed in Work state for a while.
HTH
Pablo

CIN Reports and Shipping State Issue

Hello everyone,
Can anyone help me out on the below mentioned points:
1. Standard CIN Reports. ( AR CST/VAT, AP CST/VAT, AP Service Tax Reports )
2. We have around 22 plants. We are procuring materials from a Vendor (State: Karnataka) to a plant located in state Andhra Pradesh. But if the Vendor plans to ship goods from another state,
say, Tamil Nadu. How will this impact?
What is the procedure i need to follow? The PO will be created on Vendor(Karnataka) and what about MIGO and MIRO. My problem is with the tax codes that i need to use because it is being shipped from another state Tamil Nadu.
How to address this issue.
In short, Ship from state is different from the procurement vendor state, how will this be handled ?
Any help is highly appreciated.
Thanks,
Anil

For question 1 > The report is RFUMSV00 . Refer master note for VAT 818732.
For question 2 > You have to have partner function where the goods supplier would be different. As such the purchase is from a different state in which case I believe CST will be relevant which in case of VAT based CST will have to be inventorised.

Question on Installing Reporting Services and its Databases ReportServer and ReportServerTempDB

Is it possible to have the Reporting Services installed on one server\machine and the databases ReportServer and ReportServerTempDB on a different server\machine?
I have always installed both on the same machine but this architecture is being suggested.
I know that you can install the services without the databases on an instance but how do you install just the databases without the services on an instance?
lcerni

Hi Icerni,
Based on the current description, I understand that you want to install Reporting Services on one machine, and install Report Server and ReportServerTempDB databases on another machine.
I think it’s not supported that installing only the databases related to Reporting Services on an instance without Reporting Services. From the document: Create a Report Server Database, we can need the Reporting Services Configuration Manager tool to create
Report Server databases.
In Reporting Services, there is scale-out deployment which refers to two or more report server instances that share a single report server database. They are used to increase scalability of report servers to handle more concurrent users and larger report execution
loads. And it can also be used to dedicate specific servers to process interactive or scheduled reports.
References:
Scale-out Deployment (Native Mode Report Server)
Configuring Reporting Services for Scale-Out Deployment
Regards,
Heidi Duan
If you have any feedback on our support, please click
here.
Heidi Duan
TechNet Community Support

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

Crystal Reports 2008 and BOXI3.1 issue

Hi,
Can somebody please help me finding a solution ?
Here is the Problem:
Environment Details DEV:
BOXI 3.1product version 12.1.0.882
Crystal Reports 2008
DB2 database.
Environment Details UAT BOX
BOXI 3.1product version 12.2.0.290
Crystal Reports 2008
DB2 database.
ISSUE Desc:
1. I have designed a crystal reports in whih I have two parameters of type string.
2. We are using this field to take inpuit from the user as a date field i.e. stardate and enddate in dd/mm/yyyy format (because Crystal default format is mm/dd/yyyy)
3. converting this string in crystal to date type using Date() function.
4. We are retrieving the records between startdate and enddate.
5. This reports works as per our expectation in Crystal Report and on our DEV BOXI. i.e viewing and scheduling from CMC works fine.
But doesnt on our UAT BOX.
1. Report viewing from CMC works but when we are scheduling the reports for same date the instance success but they show report without data. There is no error while scheduling.
2. Now, If I open the instance and try to reenter the startdate and enddate again having same date, then the instance show me the data.
the dd/mm/yyyy format is working while viewing on UAT but mm/dd/yyyy format is working for scheduling.
I am not able to understand why this is happening.
Can any SAP member help me out please.
Regards,
Jon

similiar problem here
Incorrect date format in Crystal Report XI

Interactive Report Download and Session State Protection

I have created an Interactive Report in an APEX application that I have enabled
session state protection for. The issue I am having is with the "Download"
functionality of the interactive report to a .csv file.
The URL created by selecting Download from the drop down (javascript:gReport.controls.download();)
is built or constructed without a checksum thus causing the error below.
Error
No checksum was provided to show processing for a page that
requires a checksum when one or more request, clear cache, or argument
values are passed as parameters.
The anchor tag containing the URL (/f?p=app_id:page:session_id:CSV:) is contained within
<div id="apexir_CONTROL_PANEL_DROP" class="drop_panel
clearfix" style="">
Running the following: Application Express 3.1.0.00.32 on Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Is there a way to add a checksum to this? OR does anyone have any ideas on how to work around this?
Edited by: Bryce Tuohy on Feb 26, 2009 10:08 AM

WORKAROUND:
1.) Create hidden ITEM on page (I named it P23_PREPARED_CSV_DOWNLOAD_URL).
Enter the following for the ITEM
as the SOURCE_TYPE : PL/SQL Function Body
as the SOURCE: return apex_util.prepare_url('f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.:CSV:')
2.) Create BUTTON that executes javascript to open POPUP window with this url.
a.) Create Button and enter
<a href="javascript:popupURL('&P23_PREPARED_CSV_DOWNLOAD_URL.')">Download and Save to CSV file</a>as the "Text Label/Alt"
Originally had custom code for javascript POPUP and this is not needed .... just use the APEX javascript function.
Edited by: Bryce Tuohy on Mar 5, 2009 10:47 AM

Incorrect indentation when using on-the-flying report generation and IF statement

Reproduce steps:
1. Use teststand version 4.2
2. Turn ON on-the-fying report option.
3. Report option -> INclude Step Results->Result Filtering Expression = Exclude Passed/Done/Skipped
4. My simply code is
For loop
   If something
      Do something
        If somethingmore
           Call Action and set Record Result = ON
        end if
End IF
End loop
Issue:
    The test report generated for "Call Action" indents every new row. Because it is a long test, this make the test report very difficult to read. If there is a very long test, the test report is  become unreadable.
Is there a solution for this issue?
Thanks

Hi Biet,
Unfortunately this is a known issue with TestStand, which is documented in the TestStand 4.2.x Known Issues. This occurs in situations where you are using HTML reports with On-The-Fly Reporting and a Result Filtering Expression. To avoid this situation, you can do one of a few things:
Use a different report format
Turn off On-The-Fly Reporting
Not filter the results
If you must filter results, you can modify the process model slightly to improve the situation. Though this is not a complete workaround, it can help.
First, configue your Report Options so that you are reporting All
Results, rather than filtering. Leave On the Fly reporting ON. Next, we
need to make a modification to your process model. In the process model,
open the ProcessModelPostResultListEntry sequence. In this sequence,
select the Process Step Result step, and select the Properties tab. On
that tab, select the Preconditions category. The text for the
precondition should be the following by default:
!Runstate.Root.Locals.ReportOptions.DisableReportGeneration &&
Runstate.Root.Locals.ReportOptions.UseOnTheFlyReporting
Now, we want to modify this to be as follows:
!Runstate.Root.Locals.ReportOptions.DisableReportGeneration &&
Runstate.Root.Locals.ReportOptions.UseOnTheFlyReporting &&
Parameters.Result.Status != "Passed" &&
Parameters.Result.Status != "Done" &&
Parameters.Result.Status != "Skipped"
This
new precondition essentially implements our own filtering. In the
condition that I have supplied, we will not add entries to the report
where the status is "Passed", "Done", or "Skipped". (You can add
additional lines to add additional statuses to filter.) The limitation
here is that the bug provides incorrect indentation, so the results may still be grouped slightly differently than they would be without the bug.
I hope this helps!
John M
National Instruments
Applications Engineer

Question about use of get_variable and if statement

Hi!
I have the following code in an RTF file.
<?for-each@section:G_NYU_TSRSLT_HDR?>
Display <?ACAD_CAREER?>
<?xdoxslt:set_variable($_XDOCTX, 'acad_career_in', ACAD_CAREER)?>
<?if:xdoxslt:get_variable($_XDOCTX, 'acad_career_in')='UGRD' ?> UGRD <?end if?>
<?if:xdoxslt:get_variable($_XDOCTX, 'acad_career_in')='GRAD' ?> GRAD <?end if?>
<?end for?>
I believe it is looping through two rows. The first row has ACAD_CAREER = 'UGRD' and the second row has ACAD_CAREER = 'GRAD'
The output is:
Display UGRD
UGRD
Display GRAD
UGRD
GRAD
For some reason, it appears like the second time the if UGRD statement is run, it still thinks the result is true.
Any ideas?
Thanks!

Hi, Sent the email. Thanks for your help!!! The code which is till the problem is (all code is in form fields in the RTF):
<?for-each@section:G_NYU_TSRSLT_HDR?>
<?xdoxslt:set_variable($_XDOCTX, 'acad_career_in', ACAD_CAREER)?>
Display <?ACAD_CAREER?>
<?if:xdoxslt:get_variable($_XDOCTX, 'acad_career_in')='UGRD' ?> UGRD <?end if?>
<?if:xdoxslt:get_variable($_XDOCTX, 'acad_career_in')='GRAD' ?> GRAD <?end if?>
<?end for-each@section?>
The output is:
Display UGRD
UGRD
<on a new page>
Display GRAD
UGRD
GRAD

How to get reporting manager and HR of an employee

Hi everyone,
I am new to HR , i have created an org unit (O) in PPOC_OLD tcode which is having three positons (S),
Pos 1 is an HR pos which is assigned to a Holder (Pernr ) with relation Incorporates.
Pos 2 is Project Manager which has also a Pernr as Holder with relation as Incorporates.
Pos 3 is a Developer which has also a pernr attached to it with relation as incorporates.
Now i need to create a reporting stricture that shows the developer repoting to its Project manager as well as to the Hr in Pos 1.
I hope you all got the idea ..!!!
Thanks
Ravi

Hi Ravi,
<li>Get the Organization unit maintained for Employee from Infotype 0001(PA0001) field ORGEH.
<li>Use below function module to get the manager of that employee.
DATA: swhactor TYPE swhactor OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
    act_otype      = 'O'
    act_objid      = p0001-orgeh
    act_wegid      = 'B012'
TABLES
    result_tab     = swhactor
EXCEPTIONS
    no_plvar_found = 1
    no_entry_found = 2
    OTHERS         = 3.
I hope that it helps.
Thanks
Venkat.O

Down loading songs security question dident get it right and locked my account on my iPad air

It's stupid for my iPad air to ask security question for my first down load now it's locked me out of my account help me please

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96120)

Interactive Report Refresh and JQuery Plugin Issue

Hi,
I have Interactive report in my page. I am using jQuery context menu plugin , so when user right click on a column he get an option to add , delete , update and other option.
javascript pseude code for context menu
$(function(){
context_menu();
function context_menu(){
$('.Col1').contextMenu();
}Suppose User Selects Delete option. In this case jQuery popup appears and users enter the data which is saved to table using on demand process. After that using gReport.search('SEARCH') , I am refreshing the page...
Now the issue arises ------ Now when i right click the column my jQuery context menu is not working ...
Workaround used ----- I added onmouseover=context_menu() function to the column link... and it working fine..
Now my question is ... each time the user moves the mouse over column it will run context_menu() function ..... Will there be any adverse issue .. or memory leakage issue...
Please advice..
Thanks,
shijesh

Hi,
I think there should not be any issues to do that way. You need of course test it carefully.
You can run stuff after IR refresh also on Apex 3.2.
See e.g. this post
Apex 3.2 hook javascripts to IR and execute those when report is refreshed
I have included that to my jQuery "plugin" for Apex 3.2
http://dbswh.webhop.net/apex/f?p=BLOG:READ:0::::ARTICLE:127800346959520
Regards,
Jari

Report preview and printing performance issues in CRXI R2

Hello to all,
We have successfully upgraded a corporate Web reporting site from CR8 to CRXI R2 Server SP3 VS2005 Asp2. Using managed reports, and native Oracle data access, performance has greatly improved. The CRXI site displays the first page in half the time as CR8. These are often very large reports.
The problem we are having is when you try to print, export, or just page thru a report in previewer. It takes as long to go to page 2, or to bring up the print dialog screen as it did for page 1 to display in the first place. This is drastically different from the performance on CR8. On the old site, when a report displayed, you could flip thru it like a Word document. Hardly any pause at all. Clicking on the printer icon brought up the print box immediately.
Is there a way to tell the 'CrystalReportsViewer' to load all pages before showing the first page?
If not, is anyone aware of a third party replacement for the CRV?
Any help would be greatly appreciated.
Joe Early

Hello Joseph,
What you're seeing is essentially expected behavior for a CR Server (BO Enterprise) based report. When you try to page through a report or print it you're basically rerunning the report on each button click.
To get around this behavior you can put your Report Object / InfoStore object into session and view, page, or print the session object from the viewer.
You can review [Business Objects Note 1203389|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001203389] for an example with the Crystal Reports .NET SDK. You'll want to add check for the session on post back, etc. but the code should give you an idea of how to get started.
Sincerely,
Dan Kelleher

Xpower 2 SLI and C-state issues

Hi there,
unfortunately faced a couple of not critical but annoying problems.
First of all it is an SLI trouble. Every time I switch off my PC and then try to switch it on there is no video output - the monitor just stays black while PC normally boots up, I can hear sound when windows loads but no video output. The only way to get video back is to take out a power cord or switch off and on the PSU or to switch off and on UPS. Well, I usually shut down UPS when PC is not needed so I do not face troubles on first boot a day, but sometimes you just need to switch on and off not through reboot. Btw with reboot there is no such problem. This doesn't happen when there is only one card.
Secondly, looks like somethings wrong with C-states or my hardware. When C1 is enabled I get high-voltage noise coming out of CPU socket. Noise remains only at zero load and if C-state is switched off - no sound. I've seen someone here with same issue but on another board, however, no solution was provided besides contacting MSI...
I've come across these troubles on all bioses from 1.5 to 2.6, so, any advice would be apreciated.
My system:
3930k
xpower 2
Hynix-1 4gb 1600x8
Zotac ref GTX 680 x2
TT TPG-1200W

Quote from: G10shish on 21-January-14, 17:15:20
Yep, it is multi-rail, well, will have an opportunity to test with single rail in a couple of weeks I guess. My mistake, it is C1E that makes the CPU sound sick, generally I don't need power saving and turbo boost at all as even 3.8 is not always enough for MEgui) Just curious
Yes, both cards were tested separately

Commitment Line Item report - BE and Settlement Unit issue

Dear experts,
Request your kind help.
This is with respect to viewing the commitment line item report in ECC 6 for RE-FX master data objects. There are two scenarios.
Scenario 1
Purchase requisition (PR) is created with a business entity (BE) as an Account Assignment object. After the PR is released the same is used to create a Purchase Order (PO). After the PO has been successfully created, I am running the Commitment Line Item report (REISCOLIBD) giving the BE number as a search parameter. The report shows perfectly the PO and the amount of commitment.
Scenario 2
Purchase requisition (PR) is created with a BE as a Account Assignment object. Further to that under the Settlement section, inside the RE Obj box I am also specifying the Service Charge Key, the Settlement Unit and the Ref Date. After the PR is released the same is used to create a Purchase Order (PO). After the PO has been successfully created, I am running the Commitment Line Item report (REISCOLIBD), again by mentioning only the BE number as the input parameter. This time the report does not show the PO at all under commitment line items and instead gives the message "no line items were selected". But here is the catch. When I am running the transaction KSB2 and I am clickng on 'further selection criteria' and then 'Ref Doc num' and then typing the PO number and then running the report, it shows the result perfectly.
Can someone please tell me why in the second scenario, the transaction REISCOLIBD is failing to capture the data related to commitment line items?
Please refer to Note 1271310 to see how to adapt the transaction REISCOLIBD to suit the needs for Commitment Line Item report.
Regards,
Suvarghya Dutta

Hello all,
I have been able to find the answer. As of now Commitment Line Item report for any master data for service charge settlement does not exist and and as such wont be available.
Kind regards,
Suvarghya Dutta

Question on "Get Reporting Statistic" and If statement issue

Similar Messages

Maybe you are looking for