Question on javap use

I have a class file in dir (tmp). It was compiled from package com.sp.oracle.
I am trying to use the command javap -c StoredProcedure to get a list of the methods in the class, but am getting the following error.
Error: Binary file 'StoredProcedure' contains com.sp.oracle.StoredProcedure
What am I missing from the command line to get this to decompile?

I have tried the suggestions. I set CLASSPATH and PATH to include c:\tmp (the base directory). I already had the file in c:\tmp\com\sp\oracle and I am still getting the same error (Error: No binary file 'StoredProcedure. RecordEntry'. I ran the following command from the c:\tmp directory:
javap -classpath c:\tmp -c com.gartner.oracle.StoredPrcoedure
I have also tried running it without the -classpath specifier (as I had added it to the CLASSPATH and PATH environment variables).
Any other thoughts?

Similar Messages

How to undo "This solved my question" on this Using iPhone forum?

How to undo "This solved my question" on this "Using iPhone" forum?
new to this forum... how do you undo this?

**** lol, In that case they should give a warning or some type of "You sure?" yes/no. I clicked completely by mistake. anyways...

Question on MacPro Using VGA

Hi. I have a MacPro1,1 and an older Sony LCD vga display that maxes out at 1280 x 1024. I just switched from a 5' vga cable to a 15' vga cable and have a marked decrease in picture quality.
Here's my question: I'm using a pretty cheap 15' vga cable; in anyone's experience, would a better-quality cable improve the monitor picture image?
Or, if I get a newer 1920 x 1200 monitor with DVI, would it look OK with 15' of cable?
Thanks for any input.

Switched to DVI cable, looks great at 15'.

Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often

Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often cannot open files(or create a new one)..what am I supposed to do?! Really don't know what to do..I'll wait for your reply

Amazon allows for at least so far when I have an issue like mentioned above a re-download.
Yes it does. So does the iTunes Store:
Download past purchases from iTunes in the Cloud - Apple Support

I can't remember my security questions and have used the maximum number of tries, how do I find out what my answers are so I can log in and buy some music?

I can't remember my security questions and have used the maximum number of tries, how do I find out what my answers are so I can log in and buy some music?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Questions concerning the use of Adobe Interactive Forms

Hi All,
I have two questions that I would to see if I could get an answer to.
1) Has or can one use an Adobe Interactive form on a Tablet PC to allow a user to draw, say a small diagram or map, and have that image then stored in an R/3 database?
2) I may already know the answer to this, but want to verify it anyway. Can Adobe Interactive forms be used to provide data to other applications outside of SAP using NetWeavers J2EE or .Net API?
Any help is greatly appreciated.
Thank you,
Mark

Hello!
1) As far as I know (and can see in Adobe Designer opened at my PC right now) there are no standard controls
in the library that can be used to add drawing (ink) area to the form. Maybe external are available, but unlikely.
Even more, googling shoes that Adobe itself is not eager to support ink in their Acrobat products... Pity but so.
So my answer for the first question is "NO".
2) That depends on what you mean on "providing data to other applications outside of SAP using NetWeaver J2EE and .NET".
If you are using NetWeaver J2EE than you are still using SAP.
If you want to install SAP's ADS server on J2EE server from another vendor, than it is not a good idea:
First - it should be merely legal to use SAP software like this.
Second - Adobe's standalone forms solution (Link: [Adobe LiveCycle Forms ES|http://www.adobe.com/products/livecycle/]) should be cheaper.
On the other hand, if you create a simple form in LifeCycle Designer not inside SAP, but launched standalone and
set this form to send data to let's say XML-service, than there is no problem to use any other server application / platform.
It's just have to be a web-service like: support HTTP-requests with XML inside.
In the last case still the question persists "why use SAP in this case?"
Just few ERP 2005 licenses will cost more, than entire Adobe product line, so maybe you have to change the platform?

A Case Study Question in the Use of Stills with Final Cut Pro

Believe it or not, for the last week I have been reading endlessly about pixels, resolution, aspect ratio, Photoshop resizing, the bloody battle over the usefulness of the term "dpi" in video discussions, and generally about what one should do in order to use still images in a film edited in Final Cut Pro. And yet, though I have a PhD from an Ivy League university, and can understand a lot of things, I am sorry to say I am still at a loss.
Much of the discussions of photos on forums like this one are either quite technical or broadly philosophical. But my questions are completely practical and specific. I am not a photographer or a printer, nor am I an experienced editor. I am just a fairly smart person trying to use photos in his film. So I am going to ask some specific questions and hope for specific answers, without any philosophical waffling or technical mumbo jumbo.
I have one of those HP all in one printer/fax/scanner machines. I am told this device, while not fancy, is perfectly adequate to the task. Some of my photos I scan with this device from prints. Some of them I get from other people. (I have stopped downloading photos from the web, as the quality is nearly always poor.) I have Photoshop Essentials (not Photoshop). I am making a 90-minute HDV documentary, 16x9. The doc is mostly HDV footage with a still here and there. I want to be able to move on the photos (zoom, pan, etc.). I want, obviously, for them to look good. My sense is that the work flow is: (a) scan the photo (or obtain from some source as a digital file); alter the photo in some way in Photoshop; and (b) import the photo into your FCP project.
Question #1: If I have a 6x8 print, what settings should I scan it in with -- is it possible there really is no difference between scanning in it at 72dpi and 300dpi? Is it really all about the dimensions of the image? Isn't a photo whose dimensions are enlarged in Photoshop to make it available for panning and zooming in my sequence going to look fuzzier and more pixelated if it was originally scanned at 72dpi than at 300dpi? Also: Does it matter if I save it as a jpeg or tiff? Bottom line: What settings do I use in my scanning software when I scan a photo for this purpose?
Question #2: Once I have the image file on my hard drive, I suppose I now have to load it into Photoshop Elements and do something to it. What is it exactly I am using this program for? I'm going to take a wild guess. I use PS Elements to (1) crop the photo so that it has a 16x9 aspect ratio, and (2) resize it so that I can do pans and other Ken Burnsy moves on it in FCP. Bottom line: What exactly do I do in PSE to the photo and what settings do I use to both (a) make it available for moves and (b) not injure the quality of the photo by increasing its dimensions?
(In passing, I will say that I have done experiments that show that if I increase a photo's dimensions to, say, 4000 pixels by 2000 pixels, the photo's quality definitely and obviously suffers. I don't understand how a picture can be increased in size without losing sharpness. So, what am I doing wrong? Is this a function of it having been scanned in improperly to begin with?)
Question #3: If I am obtaining a photo from an outside source -- say, a professional photographer -- what are the specifications I ask for in both a hard print and a photo file? If the former, what dimensions do I ask for? If the latter, do I specify resolution and dimensions and file type?
These are my questions. At this point, I really don't want to know WHY any of this is the way it is. I just want someone to say: "Do this; do this; and then do this."
Thank you very much.

Studio X is absolutely correct; while DPI has no meaning in the video world, it often has significant meaning in scanning (and, of course, printing). If your scanning program only allows image size adjustments in DPI, then you'll have to adapt to that ... keeping in mind that the scanner's DPI setting directly relates to pixel resolution. And it is pixel resolution (not DPI) that will make all the difference in the world for images used in video. You can test this yourself by scanning an image at 1000 x 1200 @ 72 DPI and again at 1000 x 1200 at 300 DPI. They will look identical on TV or projection as long as the pixel resolution remains the same.
As an example, my Epson scanning software allows me to adjust image size by DPI or pixel resolution. Wanting to maintain the correct aspect ratio for the image area that I'm scanning, I adjust the DPI setting which in turn adjusts the pixel resolution automatically. But it doesn't work the other way around; if I adjust the pixel resolution settings manually, the DPI setting does not change. Your software may vary.
As Jim Cookman suggested, a scan setting of 300 DPI works well for most images ranging from 3 x 5 to 4 x 6 (typical snapshot size) in a DV Sequence. I may scan smaller images at 400 or 600 DPI and larger images (8 x 10 and up) at 150 DPI. Other size images fall in between those numbers. But I'm constantly watching the pixel resolution numbers to make sure I'm getting what I'll need to support the animation I intend to apply to the images once in FCP. Also bear in mind that I don't always scan the entire image. I only scan the area of an image that I intend to use in my program.
So the answer is that it all depends on your scanner's software and how far you plan to push into an image once in FCP. Do a few experiments ... you're a bright fellow so it shouldn't take long for you to find the formula that suits your purposes.
I haven't edited an HD Sequence using images yet, so I cannot offer definitive pixel resolutions for you there.
On to your specific questions:
1. See above. There is no one correct answer It all depends on what you intend to do with the image once it's in FCP. If you only plan to push in about 10%, you won't need much higher resolution than the equivalent of your FCP Sequence resolution. If you plan to push in further, you'll need a higher resolution to support that move.
2. I've been doing these for many years (SD Sequences only) and I've never loaded them into Photoshop first. I import the entire folder into FCP and drop it on the Timeline so I can see what the images look like on TV; unless your program is for CD-ROM or web delivery, that's where it counts. When you place them on the Timeline, FCP will automatically scale to your Sequence settings and pixel aspect ratio. If I see that some of them need adjustment using an external editor such as Photoshop, then and only then do I use that program. And by the way, if you have a vertical image and a 16 x 9 aspect ratio in FCP, how do you propose to crop it to fit? Perhaps you meant another term instead of "crop."
3. If it's a print, it won't matter what size they supply because you'll control the image size when scanning. If it's a file ... once again, the size (pixel resolution) depends on what you intend to do with the image once in FCP.
I really don't want to know WHY any of this is the way it is. I just want someone to say: "Do this; do this; and then do this."<<</div>
With that attitude, how did you ever earn a PhD from an Ivy League university? But if that is truly all you want, you might consider hiring an experienced editor to do it for you.
-DH

EJB question: How to use abstract class in writing a session bean?

I had written an abstract class which implements the session bean as follow:
public abstract class LoggingSessionBean implements SessionBean {
protected SessionContext ctx;
protected abstract Object editRecord(Object obj) throws Exception;
public LoggingSessionBean()
super();
private final String getBeforeUpdateImage(Object obj) throws Exception {
// implement the details of extracting the backup image ...
public void setSessionContext(SessionContext ctx)
this.ctx = ctx;
private final void writeThisImageToDatabase(String aStr) {
// connect to database to write the record ...
public final Object update(final Object obj) {
try {
final String aStr = getBeforeUpdateImage(obj);
writeThisImageToDatabase(aStr);
editRecord(obj);
} catch (Exception e) {
ctx.setRollbackOnly();
This abstract class is to write the backup image to the database so that other session beans extending it only need to implement the details in editRecord(Object Obj) and they do not need to take care of the operation of making the backup image.
However, some several questions for me are:
1. If I write a class ScheduleSessionBean extending the above abstract class and the according 2 interfaces ScheduleSession and ScheduleSessionHome for this session bean (void update(Object obj); defined in ScheduleSession), do I still need to write the interfaces for LoggingSession and LoggingSessionHome?
2. If I wrote the interface LoggingSession extending EJBObject where it defined the abstract methods "void update(Object obj);" and "void setSessionContext(SessionContext ctx);", that this meant I needed to write the ScheduleSession to implement the Logging Session?
3. I used OC4J 9.0.4. How can I define the ejb-jar.xml in this case?

Hi Maggie,
1. do I still need to write
the interfaces for LoggingSession and
LoggingSessionHome?"LoggingSessionBean" can't be a session bean, because it's an abstract class. Therefore there's no point in thinking about the 'home' and 'remote' interfaces.
2. this
meant I needed to write the ScheduleSession to
implement the Logging Session?Again, not really a question worth considering, since "LoggingSessionBean" can't be an EJB.
3. I used OC4J 9.0.4. How can I define the
ejb-jar.xml in this case?Same as you define it for any version of OC4J and for any EJB container, for that matter, since the "ejb-jar.xml" file is defined by the EJB specification.
Let me suggest that you create a "Logging" class as a regular java class, and give your "ScheduleSessionBean" a member that is an instance of the "Logging" class.
Alternatively, the "ScheduleSessionBean" can extend the "Logging" class and implement the "SessionBean" interface.
Good Luck,
Avi.

Design Question: Can I use Rest-CsPoolRegisterState command in order start Front End Service when Quorum is lost and less than 85% of FES are available?

Hi,
Assuming below setup for Enterprise edition Lync 2013
Single Pool Stretched architecture with 4 FES servers
Site A Data Center
Site B Data Center
FES
2
2
SQL
1 Primary
1 Mirror
Fact: In a situation when we lose network connectivity to Site A DC, and due to less than 50% FES servers, Quorum will be lost and as a result Front End Service will stop after 5 minutes.
The question is, would I be able to do a manual intervention by using this command
Reset-CsPoolRegistrarState –PoolFqdn <pool name fqdn> –ResetType QuorumLossRecovery , and start FES with just 2 FES servers in Site B DC and 1 SQL
Server?
The reason I am asking this question is because it is mentioned in one of the Lync manuals that at least 85% of the servers must be available to recover once the Quorum has lost. The same manual also mentions to use above
mentioned command in order to recover from Quorum Loss despite the fact that the lost FES servers are still not available.
Thanks in Advance

Hi,
In Lync server 2013 Stretched pools are not supported for the Front End, Edge, Mediation, and Director server roles. It need two Lync pools.
If one pool fail to connect, An administrator can declare an emergency and fail over the pool to the backup pool. That is done by using the:
Invoke-CsPoolFailover –PoolFQDN <Pool fqdn> –DisasterMode –Verbose
More details:
http://blog.avtex.com/2012/07/26/understanding-lync-2013-server-failover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Quick Question: Will TC Use an External Drive Like the Internal?

I use an AEBS with the "unsupported disks" hack to mount a Drobo disk over AFP. I back up regularly over 802.11n (Apple Version), and it has been working very well since December. There's no question that it works. I have done a couple of restores, and regularly browse to ensure backup integrity. I do offsite backups of important/secure stuff, but that's not a Time Machine regimen. It's much more a classic "dump n' burn" type of thing.
If no one is familiar with a Drobo, it's a pretty nice piece of kit. It's a "slobo," so you want to use it over a network, but it is robust as ****. A LOT cheaper than RAID 5 (I set up about 1.7TB of redundant storage for about $700).
What I get tired of are extremely long "Preparing" and "Finishing" sessions in my backups. The backups are not considered done unless all three phases have completed ("Preparing", "Backing Up", "Finishing"). In many cases, the "Preparing" phase is a lot longer than the "Backing Up" phase. I'm pretty sure that this is because Time Machine is sorting out the prior backups on the disk. It probably does this in a fairly primitive manner across the mounted file system.
I am assuming that Time Capsule has a client/server architecture, where the TC unit does a lot of the "sorting out" in the unit itself, as opposed to making the computer do it. What concerns me is that it does this only for the internal disk, and external disks are treated in exactly the same manner as they are currently treated by the AEBS. I have asked several people at Apple (including so-called "geniuses") about this, and have received blank stares, so the prognosis isn't good.
Unless Apple can convince me that the TC will offer a significant improvement over my current system, I see no reason to get one. This isn't aimed at people like me. It is aimed at home users who have never had a backup in the first place. I don't think they lose any sleep over the thought that I won't buy a TC for my setup.

You said "In order for TC to be attractive to home users, they must be offloading a lot of the administrative work to the unit." If this was a question... The answer is that there is no real "server" intelligence built into the Time Capsule. All the "administrative work" for Time Machine is done on the Mac running Time Machine.
As a side note - Apple employees will very, very rarely enter discussions in these forums.

How to Upload Multiple questions IN LSO using Authorizing tool

Hi Friends,
I am very new to the E-learning. As per my knowledge after uploading any content through Authorizing tool in will be uploaded to KM folder.
In my practice I am trying to upload the Multiple questions. I have searched but I am not find So please guide me the below scenario.
We have a requirement that is User need to complete the assesment. In this assesment we have 100 questions with random option. How to upload these 100 question at a time using authorizing tool.
Thanks,
Suresh

Hi Sandesh,
this is simply not supported, not in WebDynpro nor in standard HTML.
A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
I hope it will help u..
----------------------OR-------------------------
As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
http://scn.sap.com/docs/DOC-2270
----------------------OR-------------------------
You can use Table UI element.
Regards,
Deepak Singh

Questions how to use it

Hello all,
after a long journey through the various documents about SAP Mobile Documents I thought this would be the fastest way to get answers to my questions:
1. How can I aa members to my folders from the IOS apps (iPhone, iPad)?
2. How can I make a folder from my documents to a folder I can share?
thanks upfront to everyone who helps me to answer these question.
Regards
carsten

Hi,
Till SP3,
- From Mobile Apps for SAP Mobile Documents, you can't edit shares (incl. adding members, creating public link for existing shares etc.). You have to do this from Web interface. The Web Interface is mobile ready and you can use it to edit the shares from your mobile.
- Sharing folders is not supported so far.
We will be developing these in next service pack - SP4.
Regards, Ashwani Kr Sharma

Question about Automator using Spaces.

I don't think this is the right place for this question, but I figured I am probably going to need to write an applescript to do what I want, so I decided to put it here.
I have an automation to open some Word documents on my idisk, then open Dictionary, then open Safari with some tabs. But the problem comes in with spaces. I have Word and Dictionary open on Space 1 and Safari open in Space 3. When the automation ends, I end on Space 3 and would like to know how I add a function to set the focus back to Space 1. It's not all that detrimental to the success of my Automation, but I only use Safari for research and would like to focus to end back on word. I have tried switching which apps open first, but I still end up on the 3rd Space.
My other question is, where can I go for reference to commands in Xcode and AppleScript that deal with Spaces? I love using that function and I have had some ideas about scripts that could help me with them, but I don't even know were I would start with commands.

There are several solutions to this.
The first option would be to send the appropriate key command to switch to space 1. If you've left your preferences as the defaults then you can:
<pre class=command>tell application "System Events" to keystroke "1" using {control down}</pre>
Which will send a Ctrl-1 and switch to space 1.
An alternative, which may be even better, is to activate the application you want to be frontmost:
<pre class=command>tell application "Microsoft Word" to activate</pre>
This should activate the application and switch to that application's space.

Quick Question: When to use ( ) and when to use [ ] and why the ( *)

Hi all,
A quick question that i'm sure is very simple but is slightly confusing me. I've just started trying to learn Objective-C and am a little confused by ( ) and [ ].
I get that you use the [ ] brackets when you want something specific from an object, i.e.
[ textField textColor ]
and that you use ( ) brackets for things like:
if ( x == y) {
But I get confused when I see things like:
NSLog(@"some text here");
Why does that get ( ) brackets and why is it not [ ].
Also another point of confusion, creating methods... Why are some methods done like:
- (void)awakeFromNib
And others done like (with the additional "*" added):
- (NSString *)stringvalue
As I said, I'm sure this is very simple and obvious, but it is confusing me slightly.
Thanks in advance!

Adam:
As you already know, square brackets are used to send a message to an object, so if a object like myObject implements the method -doSomething, you can call it with:
\[myObject doSomething\];
The other use square for brackets have is to index C-style arrays, such as:
aValue = anArray\[10\]; // Get the 10-element of an array
However, because C-style arrays are rarely used in Cocoa applications (use NSArray instead) you will not see this situation often.
Parenthesis in expressions are used to group and prioritize, such as:
x = 10 * (3 + 5); // x = 80
If () statements use it to delimit the test expression. Same with while (). for () uses it to enclose the limits and increment statements, etc.
The other important use of parenthesis is in calling a C function:
result = foo(3);
means that you are calling the function named foo with the argument 3, and storing the the return value in the variable 'result'. This is different from a message because a C function is not a method of an object. They exist independently of any objects. NSLog() is a function defined within Cocoa but it is not a method. So, you call it with the traditional C function call syntax. Cocoa defines other functions like NSStringFromRect(), which takes an NSRect as argument and returns a pointer to an NSString.
And that leads me to your last question. Some methods return simple types, like int, float, or void (i.e. returns no value). These methods will have prototypes like:
\- $void$returnNothing;
\- (int)returnInteger;
Other methods return pointers to types, like:
\- (int \*)returnPointerToInteger;
\- (void \*)returnPointerToAnything; // In obj-C one typically uses id instead of void*
Returning whole objects from methods has problems and it is better to just return a pointer (the address in memory) instead:
\- (NSString *)makeAString;
The method above returns a pointer to an NSString rather than the entire object.
Good luck with your learning,
Juan-Pablo
Message was edited by: Juan Pablo Claude

Easiest Question - Should I use some BI Object?

This potentially is the easiest question here.
Before I spend tons of time and effort learning BI to see if I can do something, I thought I'd just throw out a query here.
I'm creating an Interactive Form that the user will fill out, when they are finished they will press a 'post' button that will create a simple xml or flat file of the information and send it to the necessary parties. However, the business wants to 'report' on this information as well so they feel we need to put this data into COPA. Another collegue opted for an SIS structure or something like that. While both of these will work (the COPA option is the least desired) I thought, 'we don't have BI, but maybe I can post that data directly to a cube or something??'.
Hence the query.
Should we just simply post to an SIS structure, low overhead, pretty easy...or should we somehow put it in BI, lots of overhead, lots of learning because we do not have it, but scalable and positions us for growth.
See...just an opinion question.
Thanks,
Greg

I hope this is the possible solution for your query.
1. Go to SICF and activate this web service: u201C/sap/bc/srt/rfc/sap/QUERY_VIEW_DATAu201D
2. Go to transaction WSCONFIG and enter service destination u201CQUERY_VIEW_DATAu201D and enter variant u201Cquery_view_datau201D and hit enter. Currently, there are no released services so create a new service.
3. Choose Save to release this web lservice.
4. Choose ICF Details -> External Aliases
5. Choose u201CNewu201D to create a new external alias.
6. Enter external alias u201C/sap/bw/xml/soap/queryviewu201D and enter description u201CSAP BI Web Service u2013 XML Result Setu201D
7. Specify your security and user ID on the u201CLogon datau201D tab.
8. Specify u201C/sap/bc/srt/rfc/sap/QUERY_VIEW_DATAu201D under the u201CTrg Elementu201D tab.
9. Save your external alias.
10. Go to transaction WSADMIN -> Goto -> Administration Settings. Ensure that the path to your J2EE is specified here and save this.
11. Find your web service and choose the u201CWeb service homepageu201D
12. Login to your ABAP system from the Web Service Navigator
13. Choose Test -> GetQueryViewData to test this service.
14. Enter and Infoprovider and Query and send the request to test this web service. Note: If the query has mandatory variables, those must be passed in the parameter. For thesake of this test, use a query without variables.
15. Ensure the request and response are successful.
16. If you have issues, make sure you activate your Web Service and Interface in SE80
17. Here is an example of how to pass parameters for filter values using WEB API commands. We are passing the FILTER_IOBJNM=0D_CHANNEL and FILTER_VALUE=3.
18. Here is an example of how to pass parameters for variable values using WEB API commands. In this case,we are using a selection option variable. We are passing the following parameters:
VAR_NAME_1=DISTGOP
VAR_OPERATOR_1=EQ
VAR_VALUE_LOW_EXT_1=3
VAR_VALUE_HIGH_EXT_1=5
Hope this would help you.

Question on javap use

Similar Messages

Maybe you are looking for