Question on Time Stamp

Hi Gurus,
I have a question. When we select the date range for Date filter we see the Time Stamp as 12:00 AM beside the Date. Is there a way to turn off this Time Stamp to not to show.
Thank You

hi,
check this:
http://oraclebizint.wordpress.com/2007/12/19/oracle-bi-ee-101332-dates-dates-and-dates/
above article tells how to preserve deserved date format to prompts.
Save as system-wide default to particular column only not for all columns which are having same data type..
If you want to change this date format of this particular column in any report you can simply mention data type in column properties, but don't save format at this moment...

Similar Messages

Date and time stamp question

Is there a way to drag the "date and time stamp" to my project all at once, or do I have to continue to drag it to each individual section of my project?
Thanks

Hi,
I don't find any function module, but it does'nt really hard to code this using DIV and MOD instructions :
If you've got your time in seconds :
w_day = w_time DIV 86400.
w_mod = w_time MOD 86400.
w_hour = w_mod DIV 3600.
w_mod = w_mod MOD 3600.
It doesn't seem too bad in term of performance....
Mathieu

Time Stamp Question

There are a lot of example progs which use the time stamp format in
soem way. One of them has a little .vi which appears to update the time
in some way and it is bundled along with 1/sampling freq (dt) + the
actual array to give a (is it a bundle or a cluster?) cluster that is
brown coloured. This seems to be used a lot. Can you tell me why? What
is the advantage?
If I need time as the x axis then I can still bundle things with 0,dt
and the array. I get a pinkish coloured wire if I do this instead but
the results appear to be the same. I don't need the date, only the time
so is the brown wire redundant for my uses?
Confused of Milton Keynes.

That is a waveform. A waveform is a special class of cluster for equally spaced data. You can find them on the Programming>Waveform palette. There are several functions there specifically for waveforms for analysis and manipulation that will not work properly for your cluster. There is little to be lost and lots to be gained by using a waveform instead of a plain array or cluster.
Message Edited by jasonhill on 08-16-2006 04:55 PM

GMT time stamps interfere with calendar in 8.1.2

How do I prevent GMT time stamps from interfering with my calendars? This did not occur until I upgraded to OS 8.1.2
I sync an iPod touch 5th generation with google calendars, and have done so with this device for over a year, and on a generation 3 device for four years - all without hassle.
Since upgrading to 8.1.2 my calendar is suddenly very difficult to use.
-Chris

Sushil,
Please post this question in the Workshop 8.1 beta newsgroup.
weblogic.developer.interest.81beta.workshop
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.81beta.workshop&utag=
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Sushil" <[email protected]> wrote in message
news:[email protected]..
>
Hi All,
I am trying to develop JSP client for a conversational webservice. I amtrying
it in two ways and
none of them is working.
1)
I have put the Java Proxy file generated by Weblogic Workshop for myWebservice
in the lib
directory of the web application. According to article posted in "DearJohn" series,
my proxy
must have methods that take one additional argument to pass in Header infoapart
from all
the arguments mentioned by me. But, I don't see any methods like this inmy proxy
and
corresponding stub.
2)
Other suggested method is to use Webservices Control. In this, I amsetting a
string as
Conversation ID when I invoke a method that is marked to startconversation. Further,
if I
invoke any other method marked Continue in the same JSP it works. But,from another
JSP
where I set the same conversation ID and then try to call a method markedas Continue,
it does not work. It say, check whether you have start a conversation. Ican see
my conversation
in Test browser and I am calling continue method before max-idle-time.
I am not sure which step I am missing. Help Required!!!
Thanks in advance,
Sushil

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

DateAdd(interval,number,date) Visual Basic to LabVIEW Time Stamp add 18 months

Hi all,
I need to match Visual Basic Cmd = DateAdd("m", 18, Date()) which adds 18 months to today's date. When I use LabVIEW Time Stamp VI's at first I tried adding 1.5 years in seconds. but this did not match the VB generated method? What method do I use in LV to obtain the VB DateAdd("m", 18, Date())
Example 'Add one month to January 31, 2000
document.write(DateAdd("m",1,"31-Jan-00"))
Output:
2/29/2000

Well this is how you do it. However, it doesn't seem to work with the month. There was a thread about this problem not too long ago. If you overflow the month in the date/time rec cluster (so it is greater than 12), date/time to seconds returns 0. Every other element works fine. You can add 1000 to the day and it will figure it out just fine. When this bug is fixed, this will work. Also, it might only be a bug in recent versions. I'm on 8.5 and it doesn't work right.
I realize this isn't a great answer to your question, but as far as I know, this is the easiest way to do what you want and have LabVIEW handle all the work.
Message Edited by Marc A on 10-03-2007 03:56 PM
Attachments:
Example_BD.png ‏2 KB

Receiver FTP processing parameters should not add time stamp

Hi Gurus,
 I want to write the file at receiver end with the same name as in source directory.. (I dont want the time stamp to be added to my file at receiver side)
 For that i have configured processing parameters as
 1) File Construction mode --- create
 2) checked Overwrite existing file
 3) Put File -
use temporary file
 4) Temporary File Name Scheme --- rec_*.tmp
 5) File type -
binary
But the files are not written in target directory..
How to troubleshoot it...
Thanks and Regards,
govada.

Hi,
open RWB - coomponent monitoring
and then - adapter monitoring or communication channel monitoring
(depending on SP of your XI)
then find your channel and you will see the error - if there is any
BTW
if you don't want the timestamp just don't use:
Add Time Stamp property in the file adapter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Excel time stamp format mismatch

Hello all,
I am writing time stamp into an excel file. Time stamp for time 2013 & 2012 appears different although format & method of writing is same in both the cases.
In the attached file below. When time stamp is 2012 then format of time stamp in excel file & in input is same but when time stamp is 2013 then format of time stamp what i am writing actually & what appears in excel file is different.
Dont know where exactly it is going wrong ?
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Time stamp format difference.jpg ‏102 KB

Ranjeet_Singh wrote:
Cell formatting is same in both the files, I tried entering directly & results are same.
Thats what my question is ?
Just to be absolutely certain I understand you: when you type a date in 2013 into an Excel sheet, it displays differently than when you type a date in 2012 into the same cell in the same Excel sheet. Is that correct? If you did this with two different files, try it with a single file.
If you see this behavior when you enter the text directly from the keyboard, why are you posting it in a LabVIEW forum? It doesn't seem to have anything to do with LabVIEW.
Why can't you upload your Excel files that demonstrate this behavior?

Folders last modified time stamp are not updated in Windows 7

After changing any .cpp file in Visual Studio, the last modified time stamp for the file's folder
IS NOT updated. What's happening ?
However when I change a Word (.docx) file, the last modified time stamp for the file's folder
IS updated ! How come ?

Hi,
If you thought this issue gets worse and if you have already set NtfsDisblesLastAccessUpdate to 0, then please revoke it to 1.
From the above Blog we can see that in Windows 7, the "Last Modified" field on log files is not updated when a program attempts to open the file or the utility is stopped, this is a design change to NTFS , becase we cache the metadata for
folder contents and do not refresh it until a handle is closed on an open file or an explicit call is made to retrieve the properties of an individual file.
Per your current issue that even if you closed these Vistual Studio files, the timestamp still didn't update. Please try the following and check whether any of them work:
- open the file in a second program
- view the proprties of the file
- "dir <filename>" at a command prompt
In addition, if you edit these Vistual Studio files with Notepad(Before doing that, please close all the programs include Vistual Studio) and try to reproduce the issue, does the issue still occur?
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

IDOC number should be passed with Time stamp

Here the scenario is IDOC to File.
Currently I am getting the date and time stamp but I want to pass the IDOC number after the torr_asn_20080522-010137-257.txt
torr_asn_?_20080522-010137-257.txt
Here in place of question mark I want to pass the IDOC number and how to pass
Let me know quickly as the issue is very urgent.
Points will be awarded.

Hi Arjya,
If your requirement is to create , the file name dynamically for your receiver file adapter, you can do so using your FILE ADAPTER CONFIGURATION itself, and need not go for any JAVA Mappping / Java Code at all.
*The dynamic filename generation concept is as follows.8
In your filename field in the receiver file adapter, just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
Also, in your FILE Adapter under the option FILE CREATION MODE, you have options like,
1.Add Counter,
2. Append
3. Create
4. Add Time Stamp
Reward points if this helps
Regards
Pragathi.

Reading from a .txt and displaying in XY graph with time stamp

Hi,
I am a newbie to LAbView. I need to read from a text file having two columns, one carrying the temp value and other the time stamp. I need to plot this in XY graph on a real time basis. Please help as how can I do this..
I am attaching my files for your reference.
Thanks in advance
Ratnesh

Shidla wrote:
So what is the question about... I have to use XY graph in my program. It is used in Loop while cycle. It shows the statistic of a variable. I am using cursors in this graph to check the actual value of a variable in different period of time. But there are 7 variables and it is extremely hard for user to check each value independently. So I tried to make them moving on the X axis (TIME) together using the property node (cursors reading the position (only X axis, Y axis status lock to plot) of the major cursor and follow it... Everything looks great? But it did not work when I am trying to move the major cursor manually on graph... It works only when I am using the cursor movement buttons... But they work very slowly when there is a lot of data in graph.
I want to find out is it possible to make seven coursers mouthing together By the X axe and be Locked each at its plot by Y axe manually (Using mouse moving on a graph). Is it possible? If it is than how to do it?
Hello Shidla,
The attached VI should help give you an idea of how to create a VI that allows all cursors to move together. The main idea is to keep track of the current location of all cursors and move all of them when you see a change in one's position.
Good luck with your development.
-Matt F
Keep up to date on the latest PXI news at twitter.com/pxi
Attachments:
cursors.vi ‏164 KB

Time stamp issue in odi

Hi,
In my interface I am using txt.file as source and target is oracle. Here I am facing problem with time stamp and below are the details provided.
Details: We are getting a flat file from the source in which we are getting one of the columns as time stamp (2013032710101010) and we need to populate it in a stage table column OPTOUT_DATE which is of type DATE.
We are facing issue in loading this TIMESTAMP data into DATE data type.
Km for this is,
Lkm file to sql,
Ikm sql incremental update,
ckm sql.
Can you please suggest us how to handle this.
Thx,
Sahadeva,
9986928587.

Ok thank you..
I have one more doubt this moment.
What it is means, In the Interface level of ODI we have staging are different from target. Here we have SUNOPSIS_MEMORY_ENGINE. Can you please tell what is the use of this in ODI.
1.     How this works internally?
2.     Can we use it as our target/Source as well?
4.     Is it possible to retain data in the memory for later use?
So if you explain me more brief about these three questions that would be very much better and also helpful for me. Because I am going to develop
one POC doc(Proof Of Concept) on this.
Thx,
Sahadeva.

Adding date/time stamp to images

Hi all, we are working with multiples video sources with JMF. Now we need to add on each stream a date/time stamp and a name of the source camera.
Does someone knows how we can do it without manipulate each frame on each source ?
Thanks in advance and best regards.
Edoardo

Try the Premier Elements forum for video questions. You will get better advice over there. Good luck.
http://forums.adobe.com/community/premiere_elements

Save the file and give date & time stamp

1. Reading the Excel file from the selection screen as a parameter.
2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
 Internal table.
3. Implementing the Business Logic.
4. Move output to Final Internal table.
5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
6. That flat file should be saved with the name and location given in the Excel.
7. When ever I run the program output file will generate in the same location but with date and time stamp. Because Im running the program for range of employees say initially I run for 1 10,000 employees next 10,001- 20,000 like that.
Whenever I run for 2nd time it will overwrite the previous output, thats the reason Im using date and time stamp.
Eg:
PERSONAL Numbers Name Location
00000001 xxxxx-24.04.2007-10.30 C:\
00000002 xxxxx-24.04.2007-10.35
00000003 xxxxx-25.04.2007-10.40
00000004 xxxxx-25.04.2007-10.30
Can any one help me how to save the file and give date & time stamp through hardcode?
please help me in this issue.

I am not clear with your problem. Based on the understanding of your question,
there can be two cases.
1- U want to insert time stamp in the output file.
2- Time stamp is already there, u just have to solve the overwriting issue.
If your question goes with option 2, You can make use of import parameters
CONFIRM_OVERWRITE : Which will ask for confirmation before overwriting.
APPEND : which you can choose either to append the data to the existing file or overwrite it.
Please inform if the issue is not resolved.
Message was edited by:
 BINU RAJ BINU

Question on Time Stamp

Similar Messages

Maybe you are looking for