Question on using dialog functions

When I use some dialog function, such as two button dialog box, can I change some properties, such as the size of popup widow, font size and color?
I just want to make some more friendly and professional interface of my application to users.
Thanks.
-Dejun

That means you have to program your own pop-up vi. Some major steps to
get there is by changing the file>vi properties>window appearance
settings to "dialog."
Also use the dialog controls that are system specific (they have their
own menu in the controls palette). Also implement some cool things such
as cancelling the vi when pressing "escape" or clicking "window close."

Similar Messages

How to use RTRIM function in ABAP

Hey,
I have a question on using trim function in ABAP. According to all documents, I should be able to use rtrim as
shorttext = rtrim('abcde-xx', '-xx').
But when I do that, it gives me an error message "Comma without preceding colon (after shorttest?)"
Anyone can tell me why is this happening? how should I use this trim function? And for me to cut off variable's last few character, what else method can I use?
Thank you very much.

DATA : T1    TYPE STRING VALUE 'abcde-xx',
            T2    TYPE STRING VALUE '-xx'.
REPLACE T2 INTO T1 WITH SPACE.
WRITE :/, T1.
result output is :    'abcde'.
regards
Guna

Use of functions in static block

Hello,
I have this app containing a static {} block. The reason it's there is to 1) provide a splash screen 2) have input dialog to process input string and check if it's valid in order to load app or not.
In pseudocode it's like this:
1 - get input string with showInputDialog()
2 - check for the input string validity (a valid string is with prefix A-, C- or S-)
3 - if string is valid, load the app
4 - if string is not valid, proceed to step 1.
As you may already see, there is going to be a lot of code (with if-else statements) to check for A-, C- and S- prefixed because I am using indexOf() function which takes only one parameter.
I am considering a way to somehow check recursively, but for this I think I'll need a function to call indexOf() with A-, C-, S- and assess validity for each case.
My question is, is there a way in the static block to have a function? Or can somebody please recommend an efficient approach to checking a string validity with different possibilities inside a static block as in my case, to avoid lots of if-else statements?
P.S. My apologies for initially posting this thread in wrong section.
Thank you!
Victor.

DrClap wrote:
What's a function? And why are you particularly concerned about doing those things in a static initializer as opposed to in some other place?Hi,
Sorry, I'm still thinking c++. I meant method. Something like of the form:
static
boolean valid = false;
while string is not valid
stringfrominput = showInputDialog();
//determine if string is valid
valid = checkvalid(stringfrominput)
//if possible to have
boolean checkvalid(stringfrominput)
recursively process stringfrom input based on A-, S-, or C- prefixes
return boolean value
}I have a jar app. It is Windows-based and runs as a TrayIcon application. If I include this process when class is loaded, this means that the app will be loaded with all its features. But I need to make sure that the app's features will be loaded only if certain conditions are met.
I am not sure how else to approach this requirement without using static {} block.
Thank you,
Victor.

How to close a popup using a function key in adf + Jquery

Hello All,
I want to display some error message using function key so I have used javascript function
*function showText(event) {*
var k = event.getKeyCode();
*if (k == 115) {*
------------------------------------------CODE-------------------------------------------
This is working fine on click of F4 it is invoking a popup and inside that popup in dialog it is showing some error messages. The property modal of dialog is true. So that user should not be able to navigate to main form until error message is closed.
Now on click of F6 I want that error message to be closed. When I added af:clientListener on popup or dialog type="keyDown" is not available.
So I thought using jquery for this. I have created a form.js file inside that I have written:
*$(function first()*
* jQuery('*').bind('keydown', 'F6', function (evt){closePopup();evt.stopPropagation();return false;});*
*function closePopup(){*
* alert("Do you want to close the error message");*
I have also added jquery.hotkeys.js and jquery-latest.js file.
My question here is How can i find that popup or dialog inside that jquery function and close it?
On click of F6 I am getting that alert Do you want to close the error message but after that how can I find the popup or dialog and close it?
I am new to jquery still I tried using some code:
var dialog = event.getSource();
var popup = dialog.findComponent("p1");
popup.close();
and
var output1 = AdfUIComponent.findComponent("p1");
output1.close();
and
curElm = document.activeElement;
var frm = curElm.close();
But none of them worked.
Please help
Thanks

Hi,
this whitepaper: http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf has an example of registering keyboard keys on a global level (see page 36). So you would define a key to close dialogs in general. The paper also explains how to search and find components. Note that you should always work with the ADF Faces client side API and never against the generated markup or DOM (which in fact your code does)
Frank

FR Studio 11.1.1.3 : You're not authorized to use this function...

Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle     Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle     Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle     java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
     ... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory     Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory     5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
     at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
     at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
     at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
•     02. installer - V17382-01.zip
•     03. foundation 1 of 4 - V17397-01.zip
•     03. foundation 2 of 4 - V17369-01.zip
•     04. architect - V17398-01.zip
•     08. financial reporting - V17378-01.zip
•     11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJK

Denis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks

I want to use the Function Generator VI to send command signals through the NI 7344 motion controller. This will be a closed loop servo valve system. I want to be able to change from say a square wave to a sine wave on the fly. Idea's?

I am going to run tests that require an actuator to move using various types of arbitrary waveforms such as sine or square. The NI 7344 is hooked to the UMI that is going through a driver for a servo valve. The loop is analog and it is closed. I have played with some of the examples but can't get it to work. I have used the function generator VI to generate a signal but I think I am using the wrong input VI to the motion control board. When I use what I have it moves the servo and then stops. It doesn't continually generate the signal.
I would love to use the controls on the function generator vi to control frequency and amplitude ect. Any help or pointer would be helpful. Thank you in advance.

Hello,
I'm not clear on exactly how you want to use the generated data but I'm assuming they will be used as your target points.
There's a built-in example for motion called 'One-Axis Contour Move.vi'. This example demonstrates how to provide your target points as 1-D array. All you need to do is to replace the input array with the output of the function generator. In order to have it run continuously, use a while loop. You can further program your application so that it'll change the waveform on the fly by monitoring the user interface but this might be little little tricky as you will need to reset the move and load the new generated points while keeping track of your current position.
I hope this helps. Let me know if you have further questions regarding this
application.
Best regards,
Yusuf C.
Applications Engineering
National Instruments

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

How to Use MRS Functionality at Activity Elements Level?

When we use Multi Resource Scheduling for resources in PS, we specify "Resource planner process" as process variant at the network header and the Resource planner node.
In the other hand, at the network operation level we are able to choose the same Process variant and the system displays the planner node to start planning; however we cannot do that when using activity elements because the icon to search the Resource planner is gray out.
How can I use MRS functionality at activity elements level?
I will appreciate your help.
Ragards,
Rafael

Hi Rafael...
A question were able to integrate elements activity to MRS?
Thanks
Damy Vidal

Using FILTER function in oracle answers

Gurus,
I have a question related to using Filter function in oracle answers.
When trying to insert a Filter (expr) Using (expr) clause in the formula area of a fact table field, It errored out with msg saying about using a wrong measure.
I know this can be done with a case expression but I tried filter clause since this is available in oracle answers.
Please help me figuring out this scenario.
Thanks.

David / Raghu - Thanks for u'r replies and apologizes for not posting question with proper material.
Am posting my code and the error message from the screen.
Code :
IFNULL(FILTER("Fact - MBS Loan Transactions"."OUTSTANDING PRINCIPAL" USING "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK" = 'HDC'),0)
Error :
nQSError: 10058] A general error has occurred. [nQSError: 22032] Function FILTER requires at least one measure attribute in its first argument. (HY000)
SQL Issued: SELECT "Dim - MBS Loan"."LOAN AMOUNT", "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK", "Dim - MBS Loan"."LOAN TYPE SEN/SUB", "Dim - MBS Project"."PROJECT NAME", "Dim - MBS Project"."PROJECT NUMBER", "Fact - MBS Loan Transactions"."AR BALANCE INTEREST", "Fact - MBS Loan Transactions"."GL BALANCE INTEREST", IFNULL(FILTER("Fact - MBS Loan Transactions"."OUTSTANDING PRINCIPAL" USING "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK" = 'HDC'),0) FROM "Financials - MBS"
OK (Ignore Error)
Please continue answering my queries. Since am a newbie your answers won't be just a reply but it's actually learning for me.
Thanks.

How to use BAPI_MATERIAL_AVAILABILITY Function Module at batch level?

How to use BAPI_MATERIAL_AVAILABILITY FM to check material available at batch level?
And another question is what's the meaning of 'CHECK_RULE' in this FM. Thanks!

Field name : PRREG
fcheck more details on f1 help...
check_group defines the checking procedure to be used for availability check in individual applications.
along with the checkg group, checking rule specifies the final procedure for chkg..
eg:
ST for stock transport order
AQ for SD order project srock
also chk this help doc.
http://help.sap.com/saphelp_470/helpdata/en/cf/70124adf2d11d1b55e0000e82de178/content.htm
search the forum for sample code..
How to use BAPI_MATERIAL_AVAILABILITY Function Module....

IFrame in jQuery Dialog - submit iFrame using dialog button

Hi Everyone,
I know a lot of us are using JQuery modal dialog feature and some of us using iframe strategy to display form or page inside of modal dialog popup. Personally, I am using these features a lot in my app but there is a step where I am a bit stuck.
Here is my situation ( I am sure most of us will be interested in this to be resolved if not yet):
I have a regular page (will call it parent page), on this page I have a button and by clicking on this button I am getting a jquery modal window popup. The button itself is pointed to url: javascript:LinkAssets(); and the script to call modal popup with iFrame in HTML Header of parent page is:
<script type="text/javascript">
// Link Assets - Modal PopUp
    function LinkAssets(){
var apexSession = $v('pInstance');
var apexAppId = $v('pFlowId');
var assetNumber = $v('P17_ORDER_ID');
$(function(){vRuleBox = '<div id="LinkAssetsBox" title="Link Assets to the Order">
   <iframe src="f?p='+apexAppId+':55:'+apexSession+'::NO:55:P55_ORDER_NUMBER:'+assetNumber+'"
     width="680" height="320" title="Link Assets to the Order" frameborder="no">
   </iframe>
   </div>'
$(document.body).append(vRuleBox);
$("#LinkAssetsBox").dialog({buttons:{"Close":function(){$(this).dialog("close");}},
                                                               stack:true,
                                                               modal:true,
                                                               width:700,
                                                               height:340,
                                                               resizable:true,
                                                               autoResize:true,
                                                               draggable:true,
                    close: function(){$("#LinkAssetsBox").remove();
                                                         location.reload(true);}
</script> As you see I am calling page 55 from jquery script into iFarme which will be displayed in modal dialog. All described above is working fine, no problems and most of us use it.
My problem is here: my JQuery modal dialog has a "CLOSE" button which allows me to close a modal dialog without any changes and go back to my parent page - which is normal behavior. In my iFarme page (page 55) i have an "apply changes" button, and this button calls a process on page 55 by submitting a value and than it closes the modal dialog. "APPLY Changes" button has pointed to the url: javascript:UpdateRecord(); and page 55 has a script in HTML Header to submit value and close modal dialog:
<script type="text/javascript">
// -- Function to apply changes and close Modal Dialog--
function closePopup(){
   $(function(){parent.$('*').dialog('close');});}
function UpdateRecord(){doSubmit('APPLY_CHANGES');closePopup();}
</script> So, what I want is not to have this "Apply Changes" button in my page 55 which is iFrame page, I want this button to be next to my jQuery modal dialog "CLOSE" button which means I have to change my modal dialog popup script to include "APPLY CHANGES" button where this button will submit value to iFrame page and close my dialog.
I hope whatever is above is readable and understandable.
Thanks

since my previous solution didn't work I did try another way. I did try to create a hidden item in my iFrame page -> pass a values "APPLY_CHANGES" to this item from my "ADD" button in parent dialog window and make my DML process in my iFrame (page 55) to fire conditionally when hidden item in iFrame page has "APPLY_CHANGES" value. So, I did change my dialog window script with iframe again to include this:
$(document.body).append(vRuleBox);
          $("#LinkAssetsBox").dialog({
                        buttons:{"Close":function(){$(this).dialog("close");}
//from here ---------------
,Add:function(){location.href="f?p=&APP_ID.:55:&SESSION.::NO:55:P55_CREATE_REQUEST:APPLY_CHANGES"}
//to here -----------------
},               stack: true,
               modal: true,
                        width: 950,
...and again....it passes the "APPLY_CHANGES" value to my iFrame page item ( i can see that in session view) but my process is not running or may be it is not getting values of my form items in iFrame page.
Any ideas...comments on this???

How to use complex function as condition in Oracle Rule Decision Table?

How to use complex function as condition in Oracle Rule Decision Table?
We want to compare an incoming date range with the date defined in the rules. This date comparison is based on the input date in the fact & the date as defined for each rule. Can this be done in a decision table?

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

Using CopyValue function with error

Hi All,
I have a requirement to send the three values coming in the one source field to three different target fields.
E.g: Source field is "src1" and having the values 1,2 ,3 These values should be sent to the target fields such as
first target field "Trg1" should get the value as "1" and the second target field "Trg2" should get the value as "2".
third target field should getv value as "3"
I have used copyvalue function. it is working fine but if any value from "src 1" is blank.
I will have the runtime error as follow
Runtime exception occurred during application mapping com/sap/xi/tf/_MM_MT_WORKORDER_TO_ORDCHG_ORDERSO5_; com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-fieldmapping /ns0:MT_WORKORDER/StatementName2/TEST/acc
Will appreciate your advise on how to resolve this.
Regards,
FNG

I have mapped as follows
sourc1 -> mapWithDefault [NIL} -> copyvalue [0] -> targt 1
sourc1 -> mapWithDefault [NIL} -> copyvalue [1] -> targt 2
sourc1 -> mapWithDefault [NIL} -> copyvalue [2] -> targt 2
No substring function used.
But still having error
Runtime exception occurred during application mapping com/sap/xi/tf/_MM_MT_WORKORDER_TO_ORDCHG_ORDERSO5_; com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-fieldmapping /ns0:MT_WORKORDER/StatementName2/TEST/acc
I noticed from the source xml structure in the inbound payload, when sourc1 is blank, the tag is not created.
so question is how to create sourc1 tag if the sourc1 is come as blank ?

Using synchronisation functions.

Can you explain me how to use synchronisation functions in LabVIEW 7.0 ? With examples if possible ...
Thanks

This question is way too open-ended for a concise answer here.
You need to do a little research and learing by using the NI Example Finder and looking around NI.com for examples. LabVIEW help is also very useful.
Dave.
==============================================
David Kaufman
LabVIEW Certified Developer
==============================================

Where is the file i/o located (File Dialog Function no Longer Support Datalog Files)

Where is the file i/o located ?
This is my previous post
File Dialog Function no Longer Support Datalog Files

Please stick to your original post.
The one where the question was already answered. Twice.

Question on using dialog functions

Similar Messages

Maybe you are looking for