Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

Similar Messages

Report using ref cursor or dynamic Sql

Hi,
I never create a report using a ref cursor or a dynamic sql. Could any one help me to solve the below issue.
I have 2 tables.
1. Student_Record
2. Student_csv_help
Student_Record the main table where the data is stored.
Student_csv_help will contain the all the column names of the Student_record.
CREATE TABLE Student_CSV_HELP
ENTRY_ID NUMBER,
RAW_NAME VARCHAR2(40 BYTE),
DESC_NAME VARCHAR2(1000 BYTE),
IN_OUTPUT_LIST VARCHAR2(1 BYTE)
SET DEFINE OFF;
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(1, 'S_ID', 'Student ID', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(2, 'S_Name', 'Student Name', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(3, 'S_Join_date', 'Joining Date', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(4, 'S_Address', 'Address', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(5, 'S_Fee', 'Tution Fee', 'N');
commit;
CREATE TABLE Student_record
S_ID NUMBER,
S_Name VARCHAR2(100 BYTE),
S_Join_date date,
S_Address VARCHAR2(360 BYTE),
S_Fee Number
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(101, 'john', TO_DATE('12/17/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94777', 2000);
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(102, 'arif', TO_DATE('12/18/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94444', 3000);
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(103, 'raj', TO_DATE('12/19/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94555', 2500);
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(104, 'singh', TO_DATE('12/20/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94666', 2000);
Commit;
Now my requirement is:
I have a form with Student_record data block. When i Click on print Button on this form. It will open another window which has Student_CSV_HELP.DESC_NAME and a check box before this.
The window look like as below:
check_box       DESC_NAME+
X                   S_ID+
--                   S_Name+
X                   S_Join_date+
X                   S_Address+
--                  S_Fee+
X means check box checked.+
-- means check box Unchecked.+
After i selected these check boxes i will send 2 parameters to the report server
1. a string parameter to the report server which has the value 'S_ID,S_Join_date,S_Address' (p_column_name := 'S_ID,S_Join_date,S_Address');
2. the s_id value from the student_record block (p_S_id := '101');
Now my requirement is when i click on run. I need a report like as below:
Student ID : 101+
Joining Date : 12/17/2009 08:00:00+
Address : CA-94777+
This is nothing but the ref cursor should run like as below:
Select S_id from student_record block S_id = :p_S_id;
Select S_Join_date from student_record block S_id = :p_S_id;
Select S_Address from student_record block S_id = :p_S_id;
So, according to my understanding i have to select the columns at the run time. I dont have much knowledge in creating reports using ref cursor or dynamic sql.
So please help me to solve this issue.
Thanks in advance.

Plain sql should satisfy your need. Try ....
Select S_id, S_Join_date, S_Address
from student_record
where S_id = :p_S_id

Can you create report using report painter with Tcodes:FAGLL03,FCHN

Hi Experts,
1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
2.i never used report painter can anyone provide report painter pdf for ecc6.0
3.can any oneguide me how to develop report in report painter by using this tcodes.
4.If not possible can i do with report writer?
Regards,
naresh.
Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!

cross posted
Edited by: nareshvarma on Jul 19, 2010 9:11 AM

Using Multiple Functions with in members selection of Hyperion Financial St

Hello everyone, I am trying to retrieve all the level 0 entity members from a specific Level 3 entity member. Can I use multiple Functions with in Report studio to do this?? Or is creating an alt hierarcy my only option?
Thanks

You can try doing System Defined member list Lev 0 AND Descendants of Lv 3 member
JTS

Steps for Creating Report using LDB

hellow sirs
can u please tell Step by Step method for creating Reports using LDB method...
if possible with screen Shots..
thanking You
Rahul

Hi,
Please refer the code below:
Use the PNP LDB for this program,
*: Report: ZP_POSTCODE                                                :
*: Date : 2004                                                       :
*: Description: Displays report of employees by postcode area,         :
*:              includes current travelling allowances (i.e. parking   :
*:              permit or transport card etc..)                        :
*: Use:         Help encourage the use of car sharing and public       :
*:              transport where appropriate.                           :
REPORT zp_postcode.
type-pools: slis.                                      "ALV Declarations
NODES: pernr.
INFOTYPES: 0000, 0001, 0002, 0006, 0008, 0014, 0105, 0121.
SELECTION-SCREEN BEGIN OF BLOCK pcode WITH FRAME TITLE text-s01.
SELECT-OPTIONS: so_pcode FOR p0006-pstlz.
SELECTION-SCREEN END OF BLOCK pcode.
TYPES: BEGIN OF t_output,
pernr       TYPE p0001-pernr,   "personnel name
anredtxt    TYPE t522t-atext,   "title (based on p0002-anred)
fname       TYPE p0002-vorna,   "first name
lname       TYPE p0002-nachn,   "last name
orgtx       TYPE t527x-orgtx,   "dept
fte         TYPE p0008-bsgrd,   "fte
parking(20) TYPE c,
payslip     TYPE t526-sachn,        "payslip address
telno       TYPE p0105-usrid_long, "tel number(p0105-usrty = 0020)
email       TYPE p0105-usrid_long, "email (p0105-usrty = MAIL)
postcode    type p0006-pstlz,
END OF t_output.
DATA: it_output TYPE STANDARD TABLE OF t_output INITIAL SIZE 0,
      wa_output TYPE t_output.
*ALV data declarations
data: fieldcatalog   type slis_t_fieldcat_alv with header line,
      gd_tab_group   type slis_t_sp_group_alv,
      gd_layout      type slis_layout_alv,
      gd_repid       like sy-repid,
      gt_events      type slis_t_event,
      gd_prntparams type slis_print_alv,
      gd_count(6)    type n,
      gd_outtext(70) type c,
      gd_lines       type i.
*START-OF-SELECTION.
START-OF-SELECTION.
clear: gd_count.
GET pernr.
* Infotype 0121 is used to store multiple contracts for personnel.
* Field p0121-hpern contains the personnel number for the main contract.
PROVIDE * from p0121 between pn-begda and pn-endda.
*   Check if main contract
    if p0121-pernr ne p0121-hpern.
      reject.
    endif.
ENDPROVIDE.
add 1 to gd_count.
concatenate 'Processing personnel data'(m10) gd_count into gd_outtext
            separated by ' '.
* Display indicator for employee count
perform progress_indicator using gd_outtext.
* Retrieve datd from infotypes
rp_provide_from_last p0000 space pn-begda pn-endda.
rp_provide_from_last p0001 space pn-begda pn-endda.
rp_provide_from_last p0002 space pn-begda pn-endda.
rp_provide_from_last p0006 space pn-begda pn-endda.
rp_provide_from_last p0008 space pn-begda pn-endda.
rp_provide_from_last p0014 space pn-begda pn-endda.
* Check post code
CHECK p0006-pstlz IN so_pcode. "cp
* Post code
wa_output-postcode = p0006-pstlz.
* Personnel number
wa_output-pernr = pernr-pernr.
* Personnel title
SELECT SINGLE atext
    FROM t522t
    INTO wa_output-anredtxt
   WHERE sprsl EQ sy-langu AND
         anred EQ p0002-anred.
* First name
wa_output-fname = p0002-vorna.
* Last name
wa_output-lname = p0002-nachn.
* Organizational Unit text (dept)
SELECT SINGLE orgtx
    FROM t527x
    INTO wa_output-orgtx
   WHERE sprsl EQ sy-langu AND
         orgeh EQ p0001-orgeh AND
         endda GE sy-datum.
* FTE
wa_output-fte = p0008-bsgrd.
* Parking / travel deducted?
CASE p0014-lgart.
    WHEN '7180' OR '7181' OR '7182'.
      wa_output-parking = text-002.
    WHEN '7183'.
      wa_output-parking = text-001.
    WHEN '7171' OR '7172' or '7173' or '7174' or
         '7175' or '7176' or '7177' or '7178'.
      wa_output-parking = text-003.
ENDCASE.
* Payslip Address
SELECT SINGLE sachn
    FROM t526
    INTO wa_output-payslip
   WHERE werks EQ p0001-werks AND
         sachx EQ p0001-sacha.
PROVIDE * from p0105 between pn-begda and pn-endda.
*   Telephone numbers
    if p0105-usrty = '0020'.
       wa_output-telno = p0105-usrid_long.
    endif.
*   Email address
    if p0105-usrty = 'MAIL'.
       wa_output-email = p0105-usrid_long.
    endif.
ENDPROVIDE.
append wa_output to it_output.
clear: wa_output.
*END-OF-SELECTION.
END-OF-SELECTION.
describe table it_output lines gd_lines.
if gd_lines gt 0.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
else.
message i003(zp) with 'No records found'.
endif.
*&      Form PROGRESS_INDICATOR
*       Displays progress indicator on SAP screen
form progress_indicator using p_text.
call function 'SAPGUI_PROGRESS_INDICATOR'
      exporting
*         PERCENTAGE = 0
           text       = p_text.
endform.                    " PROGRESS_INDICATOR
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'PERNR'.
fieldcatalog-seltext_m   = 'Personnel No.'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
* fieldcatalog-emphasize   = 'X'.
* fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'ANREDTXT'.
fieldcatalog-seltext_m   = 'Title'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FNAME'.
fieldcatalog-seltext_m   = 'First Name'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'LNAME'.
fieldcatalog-seltext_m   = 'Last Name'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'ORGTX'.
fieldcatalog-seltext_m   = 'Department'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FTE'.
fieldcatalog-seltext_m   = 'FTE'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PARKING'.
fieldcatalog-seltext_m   = 'Parking/Metrocard'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PAYSLIP'.
fieldcatalog-seltext_m   = 'Payslip Add.'.
fieldcatalog-col_pos     = 7.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'TELNO'.
fieldcatalog-seltext_m   = 'Telephone'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EMAIL'.
fieldcatalog-seltext_m   = 'E-mail'.
fieldcatalog-col_pos     = 9.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'POSTCODE'.
fieldcatalog-seltext_m   = 'Post code'.
fieldcatalog-col_pos     = 10.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-zebra             = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_output
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT

How to create report using Procedure.

Hi All,
I want to create report in apex.But i do not have sql code.I have one procedure.Is it possible to create report using this procedure in apex.
CREATE OR REPLACE PROCEDURE headcsv_prc2
AS
   CURSOR cr_header
   IS
      SELECT ood.organization_code, fm.formula_no AS "FORMULA_NAME",
               fm.formula_vers AS "FORMULA_VERSION",
               fm.formula_desc1 AS "FORMULA_DESC",
               DECODE (fm.formula_status,
                       100, 'New',
                       400, 'Approve for Laboratory Use',
                       700, 'Approve for General',
                       800, 'On Hold',
                       900, 'Frozen',
                       1000, 'Obsolete/Archived'
                      ) AS "FORMULA_STATUS",
               DECODE (fd.line_type, '1', msib.segment1) product,
               DECODE (fd.line_type, '-1', msib.segment1) ingrediant,
               DECODE (fd.line_type, '2', msib.segment1) AS "BY_PRODUCT",
               DECODE (by_product_type,
                       'W', 'Waste',
                       'R', 'Rework',
                       'Y', 'Yield',
                       'S', 'Sample',
                       NULL
                      ) AS "BY_PRODUCT_TYPE"
          FROM org_organization_definitions ood,
               fm_form_mst fm,
               fm_matl_dtl fd,
               mtl_system_items_b msib
         WHERE ood.organization_id = fm.owner_organization_id
           AND fm.owner_organization_id = msib.organization_id
           AND msib.organization_id = fd.organization_id
           AND fd.organization_id = ood.organization_id
           AND fm.formula_id = fd.formula_id
           AND msib.inventory_item_id = fd.inventory_item_id
           -- and fm.FORMULA_NO like'%TEA%'
           AND fd.line_type IN ('1', '2', '-1')
      GROUP BY ood.organization_code,
               fm.formula_no,
               fm.formula_vers,
               fm.formula_desc1,
               fm.formula_status,
               fd.line_type,
               msib.segment1,
               by_product_type
      ORDER BY fm.formula_no, fm.formula_vers;
BEGIN
   DBMS_OUTPUT.put_line (   INITCAP ('ORGANIZATION CODE')
                         || ','
                         || INITCAP ('FORMULA NAME')
                         || ','
                         || INITCAP ('FORMULA VERSION')
                         || ','
                         || INITCAP ('FORMULA DESC')
                         || ','
                         || INITCAP ('FORMULA STATUS')
                         || ','
                         || INITCAP ('PRODUCT')
                         || ','
                         || INITCAP ('INGREDIANT')
                         || ','
                         || INITCAP ('BY PRODUCT')
                         || ','
                         || INITCAP ('BY PRODUCT TYPE')
   FOR ch IN cr_header
   LOOP
      DBMS_OUTPUT.put_line (   ch.organization_code
                            || ','
                            || ch.formula_name
                            || ','
                            || ch.formula_version
                            || ','
                            || '"'
                            || ch.formula_desc
                            || '"'
                            || ','
                            || ch.formula_status
                            || ','
                            || ch.product
                            || ','
                            || ch.ingrediant
                            || ','
                            || ch.by_product
                            || ','
                            || ch.by_product_type
   END LOOP;
EXCEPTION
   WHEN OTHERS
   THEN
      DBMS_OUTPUT.put_line ('Error No: ' || SQLCODE || 'Error Msg: '
                            || SQLERRM
END;
EXEC HeadCSV_Prc2
Thanks,
Raghu

RaghuVarma wrote:
I created one report using sql code.(Ex: select * from emp).
But my higher authorities want that for security purpose They will change the code into java.
What "higher authorities"? What "security purpose"?
In this process they changed my code as a procedure.Finally they give that java code.they tell to me please fix in apex.
Do these "higher authorities" know anything about APEX? What does the Java code actually do? Have you asked them how their approach is to be integrated into APEX?
There is no reason why a properly written Java stored program cannot be used in APEX, provided that whatever it is doing makes sense in an APEX/web context, and isn't some nonsense like using DBMS_OUTPUT to generate a CSV.
I tried so many ways.But it is not fixed.Different Different errors will occurs.
Tried what? Demonstrate what you have tried, preferably using examples on apex.oracle.com.
How to solve this.
How to solve what? No clearly defined problem or requirement has been identified.
Describe the the problem/requirement (not your attempted solutions) in detail.
How to ask questions
Re: 2. How do I ask a question on the forums?
Include as much relevant information with your question as possible, starting with:
APEX version
DB version, edition and host OS
Web server architecture (EPG, OHS or APEX listener), platform, and host OS
Browser(s)/version(s) used
Theme
Templates
Region type(s)

How can I use AGO function with aggregates

I use aggregated table and a detailed table
I have time hierarchy whose lowest level is date. For sales I
created year-to-year (YTD) comparision with AGO function. It
works OK.
BUT, I want to speed it up, so I used aggregates. I created new
time table grouped by MONTH and corresponding agg_SALES table. I
created connections and mapped the fields. It works OK for
normal queries, that means my queries at month level use
aggregates. BUT when I add YTD measures or YAGO measure in query, it goes to
then SALES table whose grain is date.
How can I force BI Server to use AGO function with aggregates?
I use OBIEE 10.1.3.4
Thank you
Ishaq
(Question originally taken from ITtoolbox and posted by Gorazd)
SORRY - THE QUESTION IS IN THE WRONG FORUM
Edited by: ishaq12 on Nov 19, 2008 12:21 PM

Hi,
you can not do it in Administration tool but you can set agregation for that field in Answers (fx->Agregation rule->Sum) and effect should be the same. Note that it may not work properly on Oracle 10g as generated SQL is not 100% recognized, on 11g everything is OK (at least in my case).
Regards,
Marko
Edited by: user10449532 on 2008.11.19 06:29

Using where condition with dynamic internal table

Hi Friends.
How to use where condition with dynamic internal table ?
Regards,
Amit Raut

Hai Amit
REPORT ZDYNAMIC_SELECT .
TABLES: VBAK.
DATA: CONDITION TYPE STRING.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
END OF ITAB.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
CONCATENATE 'VBELN' 'IN' 'S_VBELN.'
INTO CONDITION SEPARATED BY SPACE.
SELECT VBELN POSNR FROM VBAP INTO TABLE ITAB
WHERE (CONDITION).
LOOP AT ITAB.
WRITE 'hello'.
ENDLOOP.
Thanks & Regards
Sreenivasulu P

How to use a queue with dynamic data

When using a collector I have found that it significantly slows down my loop times. I am using LabView7.1 on a Dell PC with Windows XP. If I use a queue with dynamic data do you think that will require less of my processor and allow for faster loop speeds?
I have created a queue using dynamic data in one loop and I want to retrieve all available samples each iteration in a slower loop. If I use the flush queue I get a 1d array of dynamic data. What is the best way to convert the 1d array of dynamic data so that the array of dynamic data is consolidated back into a single dynamic data type? Any help would be much appreciated.

Hi Dennis,
You could for instance wire the array to an auto-indexed for loop. I attach an example. I assume you wish to concatenate the arrays a singel waveform.
Hope it helps,
Pelle S
District Sales Manager
National Instruments Sweden
Attachments:
Dynamic queue.vi ‏245 KB

Create Reports using Designer

Hi all,
Does anybody have any document to create a simple report using designer tables.
Or
Does anybody knows how to create reports using designer tables.
Could you please let me know
Thanks for your help
Thanks
Krishna

The best thing to do is to find a report among the reports that are supplied with Designer that contains most of the information that you want in your new report. Then make a copy of it, and use the Oracle Reports Developer to adapt it for what you need. This will give you a good example of a working report.
On the other hand, I myself am not very comfortable with Oracle Reports, so I don't do it that way. I prefer to write reports as PL/SQL Server pages and run them on the web. To make it easier, I wrote what I call a "cursor package" - a PL/SQL package containing pre-defined queries against the CI_ views in the repository. I don't currently have this available for download, but I will try to remember to add it to my web site.
Oracle has fully documented the CI_ views that make up the repository model - find the docs at: http://download-east.oracle.com/otn_hosted_doc/designer/doc_library/6i_release42/CDOC72/model/el_defs/outer_frame2_de.htm.

Need code for sales order create report using bapi's

need code for sales order create report using bapi's

Hi,
Go through below link
http://www.saptechies.com/bapi_salesorder_createfromdat2/
<b>Reward points if it helps,</b>
Satish

Using modular functions with movieclips

hi guys, this morning i was looking a tutorial that shows how to make modular functions, the user only used numbers, i was wandering if there is a way to use this with movieclips or childs.
The example was:
function addNumber(num1:Number, num2:Number, num3:Number):void
trace(num1+num2*num3);
addNumber(3, 4, 7);
i tried using a movieclip called cuadro and triying to move on the x axis, but it didnt work out:
function mObj(obj1:MovieClip, num1:Number):void
obj1.x = num1;
addNumber(cuadro, 50);
any sugestion?
thnks in advance

oh sorry my bad, i was trying another stuff
i know that the last line must say
mObj(cuadro, 50);
what im trying to do is use the function with some objects in the stage, and for example when i press the first button, it will write mObj(cuadro1, 50) , button2 mObj(cuadro2, 80), so i can use the same function for diferents objects

How to use aggregate function with Date

Hi All,
I have a group of date from that is it possible to Max and Min of date.
I have tried like this but its errored out <?MIN (current-group()/CREATION_DATE)?>.
I have also tried like this but it doesnt works
<?xdoxslt:minimum(CREATION_DATE)?>
Is it possible to use aggregate function with date values.
Thanks & Regards
Srikkanth

Hi KAVI PRIYA,
if date is not in cannonical format, how can we change it in BI publisher, then how to calcualte minimum and as well as maximum.
please advise me,
Thanks,
Sri

How to use TRUNC function with dates in Expression Builder in OBIEE.

Hi There,
How to use TRUNC function with dates in Expression Builder in OBIEE.
TRUNC (SYSDATE, 'MM') returns '07/01/2010' where sysdate is '07/15/2010' in SQL. I need to use the same thing in expression builder in BMM layer logical column.
Thanks in advance

use this instead:
TIMESTAMPADD(SQL_TSI_DAY, ( DAYOFMONTH(CURRENT_DATE) * -1) + 1, CURRENT_DATE)

How to use INVOKE function with INT parameter types

Can you tell me how to use invoke function with int parameter type ?

Pass the int as an Integer.

Creating Report using EPM Functions with Dynamic Filters

Similar Messages

Maybe you are looking for