Questions About Here

Hi
I have some questions about "here maps" and "here drive"
Here Maps & Here Drive
I first don't get really the difference between these 2 apps, Here maps seems to do driving directions just like Here Drive. Seems almost redundant.
Here Drive
Can I organize my favorites into folders?
Can I find all routes(Google Maps will show you a list of all routes and then you choose one)
If I run into a detour how can I tell the here drive to find me a different way?
Does Traffic Updates Use a lot of data? How accurate is it?
Does Cortana Work With Here Drive
How often Does the maps get updated? Do you get a notification about new map updates?
Anyone compare Here Drive vs a Garmin Device?
Can I backup my favorites?
Cortana has "Places" can those be synced with "here drive", basically "here drive" gets launched but it does not seem like favoirties are shared.

chobo2 wrote:
I first don't get really the difference between these 2 apps, Here maps seems to do driving directions just like Here Drive. Seems almost redundant.
Somehow. Actually, HERE Drive is a spin-off of HERE Maps, to faciliate and concentrate on the voice-guided car navigation. It is a different entry-point into the various HERE apps.
chobo2 wrote:
Can I organize my favorites into folders?
Symbian: yes, Web: yes, Windows Phone: no
chobo2 wrote:
How often Does the maps get updated? Do you get a notification about new map updates?
You get a notification in your phone when you open one of the HERE apps. In the past, we got updates around every quarter, sometimes half a year.
chobo2 wrote:
Can I find all routes(Google Maps will show you a list of all routes and then you choose one)
Web: yes; Windows Phone: no
chobo2 wrote:
Can I backup my favorites?
You see your backup at here.com.

Similar Messages

  • Here's a very basic question about 2 TB external drives and Time Machine.

    Here's a very basic question about 2 TB external drives and Time Machine.
    Ihave a Mac Pro with a .75 TB and 1 TB drive.  It also has a 1 TB 2ndinternal drive.  My current external drive is too small so I'll begetting a 1.5 TB or 2 TB drive.
    Obviouslythe new larger 2 TB drive will backup everything on the Mac Prointernal drive with Time Machine.  But there will be 1 TB of space leftover going to waste.
    ShouldI partition the external drive so that the TM portion will be 1 TB andthe use the remaining extra partition for additional file backups withCarbon Copy?
    Thanks for any insights.
    I tried searching around on the new Apple discussion forum, but I find it much harder to use than the old forum I used to use.

    The problem with terabyte drives is that that a 3 TB is about as big as you can get without going into RAID territory. Ideally, a Time Machine drive should be 3 times as large as all the drives you are backing up. So, if you have 2.75 TB of internal storage, you should have 8 TB of Time Machine space.
    Of course, that is "should". If your TB drives are mostly empty, then you can get away with something 3 times the size of your used disk space. Just remember that you are pushing it. Linc is right about Time Machine needing space to work.
    It is unlikely that you have regular churn on 2.75 TB of disk. I suggest identifying which drives and folders have the most activity and excluding those drives and directories that don't change much. It would be better to archive the data that doesn't change often and keep it out of Time Machine. Then you may be able to get away with a 2 TB Time Machine drive.

  • Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

    Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

    There is a problem with your iPhone.
    Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
    To find your nearest Apple Store, click here.
    Please help me i can aktivate my phone imei 012423006333181.

    There is a problem with your iPhone.
    Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
    To find your nearest Apple Store
    no imei also

  • Post your questions about #BlackBerry10 here!

    Hey everyone,
    What a week last week! I think I'm finally starting to settle down after all the excitement with our global launch events last week.
    If you're getting a BlackBerry 10 device soon, take a look at these tips on the BlackBerry Help Blog to help you set up your email, contacts, calendar and social networks: http://helpblog.blackberry.com/2013/01/blackberry-10-add-email-contacts/
    Have other questions about BlackBerry 10? Our community can answer pretty much anything, just post your question below!
    Remember, if you have a BlackBerry 10 device and need support, check out the BlackBerry 10 Support boards on the main page of the community.
    ^Bo
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Likes for those who have helped you.Click Accept as Solution for posts that have solved your issue(s)!

    sanjithb wrote:
    Why is the bis being stopped and not unlimited in south africa. Especially on the Z10.
    the BIS is not stopped. BIS is still required for OS7 and previous.
    the Z10 does not need a specific BIS plan, which is generally considered a very good improvement.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Questions about your new HP Products? HP Expert Day: January 14th, 2015

    Thank you for coming to Expert Day! The event has now concluded.
    To find out about future events, please visit this page.
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
     We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
     If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
    So, what is HP Expert Day?
    Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
    Ok, how do I get started?
    It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
    We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
    What if I need more information?
    For more information and a complete schedule of previous events, check out this post on the forums.
    Is Expert Day an English-only event?
    No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
    Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
    Korean Forum: January 15th 10am to 6pm Korea Time
    Simplified Chinese Forum: January 15th 10am to 6pm China Time
    Looking forward to seeing you on January 14th!
    I am an HP employee.

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • Questions about using the Voice Memos app

    I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
    -Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
    -When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
    -In your opinion, how is the recording quality of the voice memos app?

    You cannot import your Android voice memos to your iPhone's voice memo app.  You might be able to play the Android memos and have the iPhone pick up the audio and record it.
    Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
    App quality is excellent.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

  • HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

    hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

    Welcome to the Apple community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
    If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

  • Just installed iOS6, questions about "iMessage" and other things...

    I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
    First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
    In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
    Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
    I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
    Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
    Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
    Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
    Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
    Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
    Finally, what is the Notification Center used for?
    If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
    There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

    Hey Taantumus!
    Here is an article that will provide some guidance on this question:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Questions about Rooting...

    Hi everyone, I’ve some questions about rooting my Xperia Arc S. Hopefully I’ll get helpful answers from you.
    If I root my phone, shall I get regular software official updates from Sony?
    Currently Sony is rolling out the ICS update. After rooting the phone am I able to upgrade my phone to ICS?
    While rooting the phone if any damage is done, can that be recoverable by installing a fresh OS or something?
    Does the rooting process delete all the existing contacts, messages, apps etc?
    Finally can anyone please provide a full proof guide/tutorial for rooting the Xperia Arc S?
    Thanks in advance.
    Solved!
    Go to Solution.

    Do you have an app named Super USer ?
    Were you on 4.0.4 and then rooted your mobile using this method ?
    If yes then your mobile is not rooted for sure
    See how to root 4.0.4 here
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • A lot of questions about my MacBook Air

    I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
    Product: MacBook Air
    Operating System: Mac OS X Version 10.7.4
    1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
    2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would  get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.  
    I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
    The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then.  Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
    3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
    4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?  
    5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
    6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
    7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
    8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
    9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
    10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
    In advance, I wish to thank you in this Apple Support Communites for your help.  Have a safe and happy holiday weekend!

    1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
    2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
    AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
    The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
    I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
    4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
    5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
    6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
    7) if your printer works and it has Mountain Lion drivers, why replace it?
    8) Online banking is done with a browser - Use Safari or FireFox
    9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
    10) you can only buy Mt Lion via the App Store.

  • A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

    Hello everybody,
    SQL> SELECT * FROM v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE    11.2.0.1.0  Production
    TNS for Linux: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL>
    OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
    Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
    So, here is how I proceed
    SET SERVEROUTPUT ON;  -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
    SET SQLBLANKLINES ON;
    VARIABLE mysid NUMBER
    VARIABLE myserial# NUMBER;
    VARIABLE saved_sql_id VARCHAR2(13);
    -- So first I store sid and serial# for the current session
    BEGIN
        SELECT sid, serial# INTO :mysid, :myserial#
        FROM v$session
        WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
    END;
    PL/SQL procedure successfully completed.
    -- Just check to see the result
    SQL> SELECT :mysid, :myserial# FROM DUAL;
        :MYSID :MYSERIAL#
           129   1067
    SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
    SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
    http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
    the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
    BEGIN
        SELECT prev_sql_id INTO :saved_sql_id
        FROM v$session
        WHERE sid = :mysid AND serial# = :myserial#;
    END;
    PL/SQL procedure successfully completed.
    SQL> SELECT :saved_sql_id FROM DUAL;
    :SAVED_SQL_ID
    9babjv8yq8ru3
    SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
    SELECT child_number, sql_id, sql_text
    FROM v$sql
    WHERE sql_id = :saved_sql_id;
    CHILD_NUMBER   SQL_ID          SQL_TEXT
    0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
    SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
    After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
    Problem with dbms_xplan.display_cursor
    This was precisely what I did
    SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
    and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
    are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
    Could anyone kindly make some clarification?
    thanks in advance,
    Regards,
    Dariyoosh

    >
    and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
    are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
    Hi Dariyoosh,
    SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
    Here below what Tom Kyte is explaining in this page:
    Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
    1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
    2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
    Al

  • Questions about using a PDF form online

    I have a client who wants to create an online version of a PDF form that they are currently using. I am currently trying to explain to them that this would be best done as an HTML web form, but I may not win this argument. I have only used PDFs for printed forms (either hand-written or using form fields) so I am not familiar with any problems that converting the form for use online would entail.
    When the 'Submit' button is pressed on the form, is there a way to redirect to another web page after the data is submitted? (i.e. does the PDF have access to it's outer 'environment'?)
    Are there any security issues submitting data using the PDF form as opposed to using a standard web form? (There may be sensitive data being submitted)
    I'm not sure how they plan to handle the data that is submitted, but there are several options in the submitForm parameters - I am assuming that using the HTML option would submit the data in the same format as a web form would. Am I correct here?
    Can the PDF be prevented from being downloaded or printed? This form should only be used to submit data to their server, not as a printed form.
    Are there any other 'gotchas' that I need to look out for? Does anyone have a recommendation for a site which contains any tutorials or guidelines for using PDF forms online?

    Thanks for the information.
    Yes, I agree that there is less reason for it to be a PDF form (Actually, no real reason other than the original form already exists in PDF), but I am unfortunately in the position that my input in this project is not necessarily being considered (my company is following direct -and inconsistent- directions from the client, and I have no contact with the client to ask questions about what their actual needs are). I have been told to give the client the 'Tomato' that they are asking for, even though they are describing an 'Apple'.
    The reason this form is not meant to be printed is that we have replaced the 'Signature' fields from the original form with checkboxes that the user must check to confirm they have 'signed' the document. If they are to print/fax/whatever the document, they should use the original form, not this one. And I am still trying to explain to them that this would be better served with an HTML web form, but I fear I am losing that battle.
    I have brought up the fact that it is not 100% guaranteed that Acrobat will be available in the browser, although I can only guess that it is less than likely that anyone will not have some sort of PDF viewer available to their browser.
    I will also mention that issues may arise if the file is not submitted from within the browser.

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

Maybe you are looking for