Questions about Tuxedo patches and errors during installation

Hi,
Please help me. I'm doing my school project that requires me to install PeopleSoft Human Capital Management. I do not have customer identifier. Therefore, I could not sign in to Oracle Support. Really appreciate your help!!! Thank you in advance!
Q1. Are Tuxedo patches able to download from Oracle support only?
Q2. Is Tuxedo patch compulsory?
I have few errors in the following:
Q3. For the documentation (V27932-01 PeopleSoft PeopleTools 8.52 Supplemental Installation Information --> PeopleTools_8.52_Installation_MSS --> Task 7-5-1: Running SQRs on the Client Workstation), I got this error when I use sqrw.exe:
Error in include file "setenv.sqc on line 408:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-datein-prefix
Error in include file "setenv.sqc" on line 409:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-datein-suffix
Error in include file "setenv.sqc" on line 410:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
timeout-prefix
Error in include file "setenv.sqc" on line 411:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
timeout-suffix
Error in include file "setenv.sqc" on line 412:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-timeout-prefix
Error in include file "setenv.sqc" on line 413:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-timeout-suffix
Error in include file "setenv.sqc" on line 414:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
timein-prefix
Error in include file "setenv.sqc" on line 415:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
timein-suffix
Error in include file "setenv.sqc" on line 416:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-timein-prefix
Error in include file "setenv.sqc" on line 417:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-timein-suffix
Error in include file "setenv.sqc" on line 418:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
time24out-prefix
Error in include file "setenv.sqc" on line 419:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
time24out-suffix
Error in include file "setenv.sqc" on line 420:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-time24out-prefix
Error in include file "setenv.sqc" on line 421:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-time24out-suffix
Error in include file "setenv.sqc" on line 422:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
time24in-prefix
Error in include file "setenv.sqc" on line 423:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
time24in-suffix
Error in include file "setenv.sqc" on line 424:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-time24in-prefix
Error in include file "setenv.sqc" on line 425:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
dyn-time24in-suffix
Error in include file "setenv.sqc" on line 428:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
binarysort-prefix
Error in include file "setenv.sqc" on line 429:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
binarysort-suffix
Error in include file "ptset01.sqc" on line 38:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
ptsetxx-included
Error in include file "ptset01.sqc" on line 92:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
page_orientation
Error in include file "ptset01.sqc" on line 92:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
colr
Error in include file "ptset01.sqc" on line 92:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
page_paper_size
Error in include file "ptset01.sqc" on line 92:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
line_height
Error in include file "ptset01.sqc" on line 92:
<SQR 3601> Out of substitution or #DEFINE variables; use -Mfile to increase SUBVARS.
char_width
Error in include file "ptset01.sqc" on line 116:
<SQR 4707> No value found for substitution variable: {page_paper_size}
paper-size={PAGE_PAPER_SIZE}
Error in include file "ptset01.sqc" on line 117:
<SQR 5312> Qualifier 'paper-size' requires a list of values: <val [,val]...>.
paper-size={PAGE_PAPER_SIZE}
Error in include file "ptset01.sqc" on line 117:
<SQR 4707> No value found for substitution variable: {page_orientation}
orientation={PAGE_ORIENTATION}
Error in include file "ptset01.sqc" on line 118:
<SQR 5302> Incorrect value for qualifier 'orientation'. Valid values are: portrait landscape
orientation={PAGE_ORIENTATION}
Error in include file "ptset01.sqc" on line 118:
<SQR 4707> No value found for substitution variable: {line_height}
line-height={LINE_HEIGHT}
Error in include file "ptset01.sqc" on line 119:
<SQR 5316> Qualifier 'line-height' uses an invalid Unit-Of-Measure suffix.
Valid suffixes are: dp pt mm cm in
line-height={LINE_HEIGHT}
Error in include file "ptset01.sqc" on line 119:
<SQR 4707> No value found for substitution variable: {char_width}
char-width={CHAR_WIDTH}
Error in include file "ptset01.sqc" on line 120:
<SQR 5316> Qualifier 'char-width' uses an invalid Unit-Of-Measure suffix.
Valid suffixes are: dp pt mm cm in
char-width={CHAR_WIDTH}
<SQR 1806> Out of query space. Use -Mfile to increase QUERIES.
SQR for PeopleSoft: Program Aborting.
Press ENTER to close...
Q4. For the documentation (V27932-01 PeopleSoft PeopleTools 8.52 Supplemental Installation Information --> PeopleTools_8.52_Installation_MSS --> Task 8-4-1: Creating, configuring, and Starting the Application Server Domain), I can't boot when I use psadmin application and got this error:
(i choose serial boot (1), don't know which is better to choose)
Command to execute <1-2, q> [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright <c> 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. enter boot mode.
INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level <none>Booting admin processes ...
exec BBL -A :
process id=4952 ... Started.
1 process started.
Attaching to active bulletin board.
Attempting to boot ...INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level <none>
Booting server processes ...
exec PSWATCHSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 35931 -D TESTSERV -S PSWATCHSRV :
process id=4076 ... Started.
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D TESTSERV -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Appliction initialization failure
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
tmshutdown -qy

you said3. I run the SQR by pressing the PS_HOME\bin\sqr\MSS\binw\sqrw.exe and I type in my report name, datasource, username and password then click ok then the command came out.
>
What you didn't do was set the SQR arguments in the Report Arguments section. You need to supply the arguments as follow:
-ZIF%PS_HOME%\sqr\pssqr.ini -i%PS_HOME%\sqr -fc:\temp\youroutput.htm -printer:ht -keep
You have to do this for each SQR you want to start.
To avoid typing these arguments every time, create a shortcut of sqrw.exe, on your desktop, or where ever your like and open the properties of the shortcut and change to command line to
%PS_HOME%\bin\sqr\ORA\binw\sqrw.exe -ZIF%PS_HOME%\sqr\pssqr.ini -i%PS_HOME%\sqr -fc:\temp\youroutput.htm -printer:ht -keep
Now when you dubble click on the shortcut the arguments will be filled in automatically.
Change %PS_HOME% in above statements to your PS_HOME.
You can also read this in the installation manual in chapter Task 7A-21-1: Running SQRs on the Client Workstation

Similar Messages

Questions about Collections.shuffel and error message

I am trying to get my poker game to work but it comes up with an error when it trys to score the hand
*public class PokerTester{*
Deck deck *=* new Deck*();*
public PokerTester*()*
playGame*();*
public void playGame*()*
*{*+//stacks hand+
Hand hand *=* new Hand*();*
for(int i*=* 0*;* i*<* 5*;* i*++)*
hand*.*add*(*deck*.*getTopCard*());*
System*.*out*.*println*(*"Player's Hand:"*);*
hand*.*showHand*();*
public static void main*(*String*[]* args*)*
new PokerTester*();*
public class Hand*{*
ArrayList<Card> hand=new ArrayList<Card>();
int[] values = new int[5];
public void add(Card card)
hand.add(card);
+
public String getHandValue()
+
String win= "";
for(int i= 0; i<5; i++)
*values=values[((Card)hand.get(i)).getValue()];*
Arrays.sort(values);
if(checkRoyalStraight()&&checkFlush()) win="Royal Flush";
else if(checkFlush()&&checkStraight()) win="Straight Flush";
else if(checkOfAKind(4)) win = "4 of a Kind";
else if(checkFullHouse()) win = "Full House";
else if(checkFlush()) win = "Flush";
else if(checkStraight()) win = "Straight";
else if(checkOfAKind(3)) win = "3 of a Kind";
else if(checkOfAKind(2)) win = "Pair";
else win = "High Card";
return win;
+
public boolean checkOfAKind(int n)
+
boolean kind=false;
if(n==4)
if(values[0]==values[3]||values[1]==values[4])
kind=true;
if(n==3)
if(values[0]==values[2]||values[1]==values[3]||values[2]==values[4])
kind=true;
if(n==2)
for(int i=0; i<4; i++)
*if(values[i]==values[i+1])*
kind=true;
return kind;
public boolean checkFullHouse()
boolean fullhouse=false;
if(values[0]==values[2]&&values[3]==values[4])
fullhouse=true;
else
if(values[2]==values[4]&&values[0]==values[1])
fullhouse=true;
return fullhouse;
public boolean checkFlush()
int suit = ((Card)hand.get(0)).getSuit();
for(int i=1; i<5; i++)
if(((Card)hand.get(i)).getSuit() != suit)
return false;
return true;
public boolean checkStraight()
int count=0;
for(int i=0; i<4; i++)
*if(values[i]+1==values[i+1])*
count++;
if(count==4)
return true;
else return false;
public boolean checkRoyalStraight()
int n=10;
for(int i=0; i<5; i++)
*if(values[i]==10)*
n++;
if(n==15)
return true;
else return false;
+
public void showHand() +
+
+
for(int i= 0; i<5; i++)
int suit=hand.get(i).getSuit();
String s="";
if(suit==0)
s="Hearts";
else if(suit==1)
s="Spades";
else if(suit==2)
s="Clubs";
else s="Diamonds";
System.out.println(((Card)hand.get(i)).getValue()+" of "+s);
System.out.println("Hand value: "+getHandValue());
public class Deck
Card*[]* cards *=* new Card*[*52*];*
ArrayList*<*Card*>* deck *=* new ArrayList*<*Card*>();*
public Deck*()*
for(Integer i*=*0*;* i*<*4*;* i*++)*
for(Integer n*=*1*;* n*<=*13*;* n*++)*
deck*.*add*(new* Card*(*n*,* i*));*
+
Collection*.*shuffle*(*deck*);*
+
public Card getTopCard*()*
Card topCard *=*deck*.*get*(*0*);*
deck*.*remove*(*0*);*
return topCard*;*
public class Card*{*
private int value;
private int suit;
public Card(int value,int suit)
this.value=value;
this.suit=suit;
public int getValue()
return value;
public int getSuit()
return suit;
{color:#000000}
This is what i get when I run the program{color}
1 of Hearts
2 of Hearts
3 of Hearts
4 of Hearts
5 of Hearts
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 5
at Hand.getHandValue(Hand.java:22)
at Hand.showHand(Hand.java:145)
at PokerTester.playGame(PokerTester.java:16)
at PokerTester.<init>(PokerTester.java:6)
at PokerTester.main(PokerTester.java:21)
Also I cannot get the Collections.shuffle() to work correctly does anyone know how to use this properly, Thank you

When you use the letter "i" for an array index without using the code tags, the forum interprets that to mean "start italic" and your code is mangled - converted to italic and changed.
Repost using code tags:
[code]
Put your code here
[/code]
This error
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 5means that an array index value is greater than the max value allowed for the array.
If you can't fix this, identify the line where the error is happening (it's line 5)

Error during installation OS 10.8.2 getting restart and thin black break screen

error during installation OS 10.8.2 getting restart after apple logo several times and thin black&white crashed screen

I had this problem too.
Go to http://support.apple.com/kb/DL1580
Download the update manually and install. Worked on my MBP15 retina.
Regards
Chris

Got error during installation saying serial number is invalid for a photoshop and premiere elements package I bought from Adobe website last year. Anybody has a solution for this? Thanks.

Got error during installation saying serial number is invalid for a photoshop and premiere elements package I bought from Adobe website last year. Anybody has a solution for this? Thanks.

Does your serial number show on your account page?
https://www.adobe.com/account.html for serial numbers on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

PSC 1410 driver and fatal error during installation

Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you

hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you

PhotoSmart C6280 - Fatal Error During Installation

I have Win 7 (64 bit) system and cannot install software for my C6280 All-In-One Printer. I keep getting a "Fatal Error During Installation" message and then the software tries to uninstall. During this process a reboot is required and then the software tries to install again and then fails. I'm in a never ending circle of install-uninstall-install-uninstall........
How do I get out of this? I want to completely uninstall all software associated with this printer and then start from the beginning.
The issue that brought about this situation was that I was getting the following message at bootup time:
"There was a problem starting C:\users\Myron\AppData\Local\IsolatedStorage\HP\zelqof.dll
The specified module could not be found."
I am assuming that the missing module would get installed if I re-install all of the associated software with the printer as this is the ONLY printer connected (USB) to this PC.
This question was solved.
View Solution.

Hello BigDog5280,
Welcome to the HP Forums.
I see that you are having an issue with a looping uninstall/reinstall of the software and drivers.
If you have Norton 360 installed, please disable it and reboot the computer. When the computer is back on, attempt to reinstall with Norton 360 still disabled.
Here is a link to a document that deals with a Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

Fatal error during installation

I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
Thanks,
tuvixcrc

Hi,
Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
1. Re-download the Visual studio from Microsoft official site here:
http://www.visualstudio.com/downloads/download-visual-studio-vs
After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
Refer to the below page to know checksum detailed number:
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
Refer to
Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
3. Clean your %temp% folder and run the installer with Administrator permission.
Look the links to get more information:
http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
If that still cannot go on the VS installation, please use
http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://Onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Domain creation error during installation of forms 11g

Dear all,
I have the following error, during installation of forms 11g, the installation completed successfully but in configuration section it gave error on the 1st step domain creation.
weblogic server version 10.3.6
forms and reports version 11.1.2.1.0
java version "1.4.2_06"
here is the error portion from installation log
----- **************** log *****************************-------------------------------------------------------------------------------------------------
Entering windows
OneoffTool Script Location: C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
oneoff command is: f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
[ProcessManager] Invoking:C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
    stdout=[
C:\Users\Nadeem\AppData\Local\Temp>f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
OPatch failed with error code = 1
    stderr=[java.lang.UnsupportedClassVersionError: oracle/opatch/OPatch (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Exception in thread "main" ]
sbStderr.length():891
[Applying patch f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip and the java.lang.UnsupportedClassVersionError: oracle/opatch/OPatch (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Exception in thread "main" ]
oneoff command is: f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p6599470_111070_Generic.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
[ProcessManager] Invoking:C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
    stdout=[
C:\Users\Nadeem\AppData\Local\Temp>f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p6599470_111070_Generic.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
----- **************** log *****************************-------------------------------------------------------------------------------------------------

user2040934 wrote:
Dear all,
I have the following error, during installation of forms 11g, the installation completed successfully but in configuration section it gave error on the 1st step domain creation.
weblogic server version 10.3.6
forms and reports version 11.1.2.1.0
java version "1.4.2_06"
You have the wrong Java version installed. Do you already have another Forms version installed (like Forms 10g)? I ask this because Java 1.4.2_06 installs with the Oracle Developer Suite 10g. For Fusion Middleware 11g (Forms 11g) you need to have Java 1.6 installed. If you already have Java 1.6 installed, then you will need to modify your System PATH so that it lists Java 1.6 before Java 1.4. The error you are getting, "stderr=[java.lang.UnsupportedClassVersionError" is because Java 1.4 doesn't support the method the installer is using. Run the following command from a Command/Dos window: "Java -version". If it does not show Java 1.6.0_??, then your PATH is still not setup correctly or you don't have Java 1.6.0 installed.
Craig...

VS 2015 - Fatal error during installation - Cannot read key

I'm trying to install Visual Studio 2015 Preview from the ISO image. I get this error
Visual Studio Core Features
Fatal error during installation
Here are the relevant parts of the log file
http://privatepaste.com/d2f0080766
Trying to fix the permissions to the mentioned key (which I have done maybe ten times by now) only gives me a new error with a new key. Is there a better solution?
Windows 8.1

I downloaded the
Visual Studio 2015 Preview ISO Image in English onto Windows 7 PC. I didn't have an optical disk large enough to copy it to in order to install VS 2015 preview using ISO from optical disk drive.
So I used 7Zip to extract the files from the ISO into a folder on my desktop and then install it. There was no key needed as this is a preview version. So I was never asked about any key. Although it must've had a key that came with it because
after it installed I went to Help, Register Product and was advised after a bit that it updated with a key I suppose, even though it was already working, and the product was good for so many days.
Microsoft recommends the following for extracting files from an ISO in order to install the software without using an optical disk. I used 7Zip which is not recommended by MS.
The following tools offer .ISO file support:
IsoBuster
CDmage
Daemon Tools
Winrar
Also note: "Visual Studio 2015 Preview cannot be installed on a computer that has a previous version of Visual Studio "14" CTP installed. To install this release version, you must first
uninstall any currently installed CTP."
And I had installed .Net Framework 4.6 preview prior to installing VS 2015 preview.
La vida loca

Msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25

msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25bdaf18c3b9b1a1ee8\ab4027db46dde994b955a68c2fdf44a. verify that you have sufficient access to that key, or contact your support personnel. please go to http:\\hp.com\support for troubleshooting information about "fatal error" and " msi.webprintlist"

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

1603 fatal error during installation-L7680 all in one printer

I continue to get this error because the installation finds newer software and quits. I have completed the MSI error 1603 solution 16 page paper for windows XP and was unsuccessful. I then used CCleaner to clean all registry errors, and that still didn't work.
Is there a quick fix to get past this error and install the latest scanner software on the HP site? I can print with this printer, but can not see it on the network nor use the scanner.
Best regards,
Ed

Hello @charleydog
Welcome to the forums
I read your post about the Fatal Error 1935 you're receiving when installing your Photosmart C4280 on your Windows 8.1 system.
I have located a specific document for this certain error you are seeing. I would suggest checking out the guide and trying out all of the steps it recommends to resolve the Fatal Error issue.
Fatal Error 'Error 1935. Fatal error during installation.' (MSI Error 1935) Displays During HP Softw...
I hope this helps you!
Have a terrific weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

1603 - Fatal error during installation

Hi all,
3 days ago I got Adobe Creative Cloud with access to all Apps in the Creative Suite. After downloading the Adobe Application Manager I commenced downloads/installs of each of the apps. Nearly half of them have come back saying that "Installation completed although some optional components failed to install correctly.
After hitting the hyperlink of "more details" I get this:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Microsoft_VC90_CRT_x86 1.0.0.0 {08D2E121-7F6A-43EB-97FD-629B44903403} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x8007054F.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x8007054F.
ERROR: Third party payload installer Microsoft_VC90_CRT_x86.msi failed with exit code: 1603
Two questions. What do I do from here to ensure that all problem installations are rectified? And is this error code a minor or major issue?
Thank you,
dropbear1990

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Error during installation of oracle 10g on fedora14

Hi all,
I am trying to install oracle 10g on fedora14. However i am getting the error during installation.
Could you people suggest me the root cause...!!
Error log:
[oracle@test database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
Tried another option as well but same error:
[oracle@test database]$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success

Vinod Ranjan wrote:
Hi all,
I am trying to install oracle 10g on fedora14. However i am getting the error during installation.
Could you people suggest me the root cause...!!
Error log:
[oracle@test database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
Tried another option as well but same error:
[oracle@test database]$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-06-22_03-26-15AM. Please wait ...
Error in writing to directory /tmp/OraInstall2011-06-22_03-26-15AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Successpost results from below
id
env | sort
Edited by: sb92075 on Jun 21, 2011 9:33 AM

Questions about Tuxedo patches and errors during installation

Similar Messages

Maybe you are looking for