Questions on Shared and Group To Do lists

A few questions:
1) I am in a Group (domain group), that was assigned a task. So I had a To Do list for that group on the left, in my To Do list screen. Well, we aren't going to assign tasks to that group anymore. The To Do list is empty. How do I remove it from the list of To Do lists on the left?
2) I have a different group queue that had a task in it. Due to a problem with the workflow, I had to terminate the process behind it. But the task is still listed in the Group To Do list. I can't do anything with it. How do I get rid of it?
3) I shared my To Do list with a different user. That user can see my Shared Queue in their To Do list on the left, as one would expect. However, they never see any of the tasks in my To Do list. I thought they should be able to see what is in my queue. Any idea why they wouldn't?

Jasmin,
As for cleaning out those process, I already have, I think. The only option I see is "Terminate", which is what I did to start the problem in #2. I terminated the process, the task is still in the group queue. In the admin ui, the process shows as terminated. In the task search, the specific task shows as complete. However the Task card is in the Group to-do list. If you look at the Task Details on tat card, it says the process is terminated. However, there are not buttons available at all - you can't remove the task in any way I can find.
WorkspaceUser,
These groups are domain groups imported from active directory. So I don't control their membership.

Similar Messages

Few basic questions about sharing and other stuff..

Hi there!
First of all I know where are "101" pages, but they are not giving detail information.
1.I know there are some folders where I can put files, web-sites and other in order to enable sharing.
What do I have to do to enable other users (from internet to)
- view my webpage when they enter my IP address in browser
- to access files which I want them to be able to acces (with user and password required)? I know there is sth like sharing, and windows sharing, but I give access to my all user folder, do I have to create new accounts on my mac?
2. It's kind of small problem, but can I run apps in finder using only keyboard (enter causes rename action)
3. Why doesn't safari keep addresses I used in addres field after few days?
The most important question is 1.
Will be gratefull for help.
Thanks
Adam Mscisz

1. Start Personal Web Sharing from the Sharing pane of System Preferences; if you have a router between your computer and the Internet, ports 80 and 443 need to be forwarded to your computer. You can set this up from the router's configuration page, which is accessible by finding the router address in the Network pane of System Preferences and putting it into a web browser. See this article for instructions on how to password protect your shared files.
2. You can use the Command and O keyboard shortcut to open the selected item in the Finder.
3. The default setting in Safari is to keep the history for 7 days. You can use the method posted by ptejad in this article to extend the time Safari remembers the history for. The method at the top of the linked page won't work in Tiger.
(14218)

Screen sharing in group video calling

Is it available screen sharing option for gp video calls ?

I got this e-mail too. I do not think it is scam. But I want to use both desktop and windows apps. What the problem? Please Skype team do not change anything.
Use the best Skype experience on your computer
Hello .......,
It looks like you’ve signed into two Skype for Windows apps ‒ Skype for Windows desktop and Skype for modern Windows ‒ on your Windows 8 device.
We’re simplifying your experience down to one app that you can use either with your mouse and keyboard or with touch. Going forward you’ll only need to use the Skype for Windows desktop app. This app has more features to help you stay connected like screen sharing and group video calling. Also, your chat conversations (from the last 30 days) and all your contacts will appear as normal.
Note: From 7 July, 2015 you’ll no longer be able to sign into the Skype for modern Windows app.

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

How can I stop my iPhone from synching my contacts and groups lists twice?

How can I stop my iPhone from synching my contacts and groups lists twice....I am using iCloud but am not sure how correct this duplication.

Go into Settings>Mail, Contacts, Calendars. Is this happening at the bottom in the signature section, or in the header of the mail where your email address is? If it is the signature, then go to the Signature area of the Mail settings. If this is in the header, then go to the account in question and edit your account information to include your name instead of Johnny.

Snow Leopard Finder's Get Info fails to show Owner and Group for some files or folders which reside on a Shared Volume, hosted by G5 Server w/ OS 10.4 - why?

Frustrations with file permissions abound, as certain co workers are unable to manually determine their level of permission or who to ask to make changes to files and folders belonging to others. Users of Snow Leopard desktop OS get unhelpful feedback via Finder's Get Info, seeing only the permissions listed for "Everyone" and a statement that "You have custom access". The custom message exists, presumably, because ACL's are employed on the shared volume in an attempt to give managerial control over these volumes to specific users, even if all users can create files and folders on those volumes.
Shared volumes are partitions of an external RAID which are set up as sharepoints on a G5 tower running Server 10.4. Other persons in the office, using machines that are running desktop OS 10.5, can correctly see the assigned Owner and Group permissions (although the "custom access" still shows). This at least lets the 10.5 user know who created a given file or folder, so that they can resolve permissions-restricted issues if they come up (i.e. User A wants to delete file X, but as it was created by User B, A must contact B and have them delete it. In 10.6 it appears that A cannot determine who B is).
I know that ACL's are functioning (enabled on the drive) since we have been making use of ACL-granted write privileges for quite a while (and the custom access seems to be evidence too).
An error I encountered, pertaining to this, is that I used a 10.6 machine to create a working folder, then generated and saved several files in this location. Expected permissions thus would be Owner = me (i.e. the user I was logged in as), R/W, Group = staff, R only, Everyone = R only. However, immediately the permissions shown in Finder / Get Info consisted only of Everyone = R only, with no entry for Owner or Group. Moreover, clicking + to add either an Owner or a Group resulted in error message that I had entered an invalid user or group, even though I typed in correct info (such as trying to add "staff" as a group).

Frustrations with file permissions abound, as certain co workers are unable to manually determine their level of permission or who to ask to make changes to files and folders belonging to others. Users of Snow Leopard desktop OS get unhelpful feedback via Finder's Get Info, seeing only the permissions listed for "Everyone" and a statement that "You have custom access". The custom message exists, presumably, because ACL's are employed on the shared volume in an attempt to give managerial control over these volumes to specific users, even if all users can create files and folders on those volumes.
Shared volumes are partitions of an external RAID which are set up as sharepoints on a G5 tower running Server 10.4. Other persons in the office, using machines that are running desktop OS 10.5, can correctly see the assigned Owner and Group permissions (although the "custom access" still shows). This at least lets the 10.5 user know who created a given file or folder, so that they can resolve permissions-restricted issues if they come up (i.e. User A wants to delete file X, but as it was created by User B, A must contact B and have them delete it. In 10.6 it appears that A cannot determine who B is).
I know that ACL's are functioning (enabled on the drive) since we have been making use of ACL-granted write privileges for quite a while (and the custom access seems to be evidence too).
An error I encountered, pertaining to this, is that I used a 10.6 machine to create a working folder, then generated and saved several files in this location. Expected permissions thus would be Owner = me (i.e. the user I was logged in as), R/W, Group = staff, R only, Everyone = R only. However, immediately the permissions shown in Finder / Get Info consisted only of Everyone = R only, with no entry for Owner or Group. Moreover, clicking + to add either an Owner or a Group resulted in error message that I had entered an invalid user or group, even though I typed in correct info (such as trying to add "staff" as a group).

WLS Users and Groups interface questions / observations

I'm new to WLS, having just installed OBIEE 11g for the first time. There are some oddities in WLS around setting up Users that I'd like to ask about, to see if I'm just missing something, or if the interface really IS this bad. Please feel free to comment in any way, or to correct any statements that are erroneous. Here goes:
1. The use of Previous and Next buttons instead of a vertical scroll bar for finding users and groups in their respective lists. What if you have several hundred users, and the one you want to modify starts with the letter 'Z'? That means clicking the Next button several dozen times. (Security Realms … myrealm … Users and Groups … Users) Not only is there no scroll bar, there's no search box either. The only way to get to a user near the end of the alphabetical listing is the Next button. Is that correct?
2. After adding a new user, what's the next most logical thing to want to do? How about assigning that user to Groups? So why do I have to click Next several times to find that new user in the alphabetical list? I don't see a sortable 'Date Modified' field for the table of users, nor a link to the "Most Recently Added" user. Nor can I assign groups during the same action as creating the user. In the example in #1, I might have to click Next several dozen times to get to the user I just added. Is that correct?
3. When creating a new User, immediately after clicking New, where is the most likely place that I'd want to go? How about the Name field? Right now, the cursor rests in some indeterminate location. I have to hit the Tab key 14 times, or move the mouse into the Name box and click it. The active cursor position does not default to the Name box when creating a new user. Is that correct?
4. I don't see a 'Create Like' button for creating Users, so that existing group membership can be easily replicated. I'd like to be able to add a new employee by clicking to highlight an existing user from the same department, clicking a 'Create Like' button, then entering a new user name and password, with all group memberships assigned automatically based on the source user. The same could be said for replicating groups. I don't think that exists. Is that correct?
5. I don't see a clean way to return to the User list on the page on which I clicked a user name. Imagine that I'm going through my entire list of users one at a time to set an attribute. I click on the user JSMITH and set the attribute. The only way to get back to JSMITH's page and select the next user list is to hit the browser's back button three times, or to click the Users and Groups breadcrumb at the top of the screen and use the Next link multiple times to find that page again. Is that correct?
6. I don't see a way to bring up a Group and assign Users to it from a list. It appears that the only way to assign a User to a Group is to access a User profile and click Groups. If we're creating a new group that has 200 users selected from a list of 500 users, that could potentially represent somewhere between 5000 and 10000 mouse clicks. It would be much more efficient to be able to bring up a group, then select its members from a list of users. That does not appear to be possible. Is that correct?
7. It also appears that when assigning groups for Users, the list of Available Parent Groups sorts the lowercase entries after all uppercase entries, so that groups that start with the letter 'a' fall after groups that start with 'Z'. That is not the case with the list of users. The User table uses a case-insensitive sort. Is that correct?
8. When I want to delete more than one User, and the ones that I want to delete are on different pages, there appears to be no way to select those users from multiple pages at the same time. So, imagine that I have 500 users, and I want to delete two users, one of whom is listed on page 48, and the other on page 50. I would have to click the Next button 47 times to find the first user and delete it. At that point, the interface returns to page 1, and I have to click the Next button 49 times to reach the second user. Is that correct?

Hi,
Regarding your first question, you might want to press the "Customize this table" button, then select the maximum allowed amount of rows in "Number of rows displayed per page:" that would resolve some of the problems you're having with the interface. I do think this is not a great graphical tool, and there are some usability issues.
Regarding the adding of users to groups, it seems the way you describe is the only way of doing it, however you could try using a script instead of the graphical console, the easiest way of making it is adding a user to a group while using the "Record" button on the top of the screen to get a wlst script to use as a model, then create a new script with all new users you want to add/modify.
Regards,
Franco.

Strange Sharing and Permissions and Admin Users question.

I am having problems printing and need to change the permissions and ownership on a library file
My directions were to:
[ The fiery cups filter needs ownership changed from admin to system (root) ]
My secondary question is I am making the assumption that when someone refers to my "system (root)" that this is the same as "my name (me)" Yes?
But my primary mystery question is
As I went to change the permissions on the above top topic I noticed I had four choices.
I am the only single user of this computer. My permissions are set to Administrator status.
I apparently had a guest account enabled but I don't remember turning this on.
On the get info window, at the bottom, under sharing and permissions, NAME and PRIVILEGE when I add - select a new user or group, I have:
My account "my name (me)"
"administrators"
and *"firebird database"?*
"everyone" is already there as a standard default.
*I don't know what the **** "firebird database" is. It shows as a single user account.* My guest settings were enabled to connect to my shared folders, which I have turned off. Is this "firebird" part of Apple code or has something been compromised without me knowing?
Anyone know? Thanks in advance.

Root or System ownership is not the same as you. You are a restricted user. Root is an unrestricted user.
If you have installed third-party printing software with incorrect permissions, then start by using Disk Utility to repair permissions. Do not begin changing file/folder permissions when you obviously do not know what you are doing as this could screw up your entire system.
Firebird is a third-party database program that you must have installed. Obviously there is a problem with it. Either uninstall it or contact the developer for assistance.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

I am trying to stop programs from opening automatically when I turn my computer on. I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing. They continue to open up every time I turn on my Macbook Pro.

Hi r,
It sounds like you're running Lion?
Have you tried running Verify and/or Repair Disk?
Have you tried running Repair Permissions?
Do you have at least 15% free space available on your HD?

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Using member sorting and grouping with two reports sharing rows

Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT               MATERIAL          AMOUNT
TOTAL PROD_A-X                                   100
PROD_A_A             MAT1                          22
PROD_A_B             MAT1                          50
PROD_A_A             MAT2                          28
TOTAL PROD_B-X                                   120
PROD_B_A             MAT1                          30
PROD_B_A             MAT2                          50
PROD_B_B             MAT2                          40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much

Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT               MATERIAL          AMOUNT
TOTAL PROD_A-X                                   100
PROD_A_A             MAT1                          22
PROD_A_B             MAT1                          50
PROD_A_A             MAT2                          28
TOTAL PROD_B-X                                   120
PROD_B_A             MAT1                          30
PROD_B_A             MAT2                          50
PROD_B_B             MAT2                          40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much

Family sharing question-after we updated to family sharing, and I have a new apple id, I have found that all the pages documents on my iPad are only accessible if I sign in via the original apple ID- now my husband's( the primary user). is there an e

Hi there,
this is a Family Sharing question. After we upgraded to family sharing, and I now have a new apple id, I find that all the documents on my iPad in pages, are only accessible if i sign in with the original apple id- now my husband's ( he is the primary account holder). Is there an easy way to migrate these documents to my iCloud account, or do i need to email them to myself . There are a couple of hundred documents.
Many thanks in advance.

Thankyou for the reply.
No. I have tried twice. When I turn off pages in the iCloud settings while logged into his account, then my documents in pages just are gone. They return when I turn it back on.
Is there another way I can save them to the device?

How can i send a email to multiple people on my ipad2 using the contact and group list downloaded from my iMac. Thank you

I am 63 yrs old and not to computer literate. I know how to send an email to multiple people using my contact list and groups on my IMAC. I tried using a group name downloaded to my Ipad2 from my IMac. It does not work. If I choose a single email address it works. Any idea what I am doing wrong?
Thank you for your paitence and help.
Steve

You are not doing anything wrong. The feature that you need is totally lacking in the built in Mail app on the iPad.
There are a couple of third party mail apps that will let you do this ... MailShot and Group Email with Attachments. You can check them out in the App Store.

CSSimport.bat error: while migrating the Shared Services groups and users

Hi,
I am trying to migrate the shared services native users and group from 9.3.1(on server A) to 11.1.1.3(on server B)
- I have taken the export in CSV format from 9.3.1 using CSSexport.bat.(export.csv) -Successful.
- I have copied this on the 11.1.1.3 server and changed lil details like removing the admin user etc.
- When I am trying the import this on 11.1.1.3, I am getting the below error:
CSSimport importexport.properties2010-10-11 09:36:41,328 Attempting a import operation
log4j:WARN No appenders could be found for logger (com.hyperion.css.common.CSSLogger).
log4j:WARN Please initialize the log4j system properly.
null
Aborting program...
- There are not log or error files geting generated - The only error recieved , is given above.
- I have made the necessary changes to the impotexport.properties file on 11.1.1.3 before starting the CSSimport utility.
Can you please let meknow what should I do to overcome this error.
-thanks,
Ankit

First thing I would try would be on the 11.1.1.3, try and run an export, if it works then run the import on the same file, this way you will make sure you have the version 11 utility working.
Once you have done that then you can move on to the 9.3.1 export file.
Cheers
John
http://john-goodwin.blogspot.com/

Questions on Shared and Group To Do lists

Similar Messages

Maybe you are looking for