Questions on Solution

I'll try to keep this short. I am trying to get my hand wet on Solutions and versions
This is what I did. I created a solution and drag and droped my Project in it.
Under Principle element the project came and under required elements all models and global variables came.
To test how solution works...
I added few columns in a datastore under a model. Then I restored the model from Solution thinking the new columns I added would go away. But those new columns still exists. I am bit confused on this.
Question 1)
If I delete a column and restore model it comes back. But if I add a column and restore its not going away. Is that a correct observation?
Question 2)
Also I deleted few interfaces in my project and a global variable.
When I restored project the global variable I deleted didn't come back. So is there an order to restore a project?
Question 3)
I see an option Synchronize. What does it do?
-app

I pretty much did what you did ,
1. Deleted the complete Folder inside project ,
2. Deleted Data store,
3. Additiion 3 column in Datastore
4. deleted Global Variable.
When i restored , i got all the objects back . Its just when the restoration is complete , the objects is not visisble immediately, try refreshing or re opening the designer then you should see the objects back to version created .

Similar Messages

  • Questions in Solution manager

    Hello friends,
    Can any one answer these questions
    SAP Solution Manager Overview Key points
    -       Scope of Solution Managers capabilities
    -       Work required to implement and configure Solution Manager – i.e. how much is out of box vs. customer/implementation specific?
    -       How it can be customized
    -       Reports / metrics that solution manager offers
    Thanks

    Hello,
    what is Solution Manager? A platform that provides integrated content, tools and methodologies for implementing, supporting, monitoring, upgrading and operating your enterprise SAP solutions.
    My recommendation would be, if you have a chance to attend any of the SAP Solution Manager Seminars www.sapsolutionmanagerseminar.com/ would be the best to do. I am just back from the Amsterdam session. I have mainly worked in SAP Solution Manager projects, but still learned a few things even in areas I have been involved in.
    Can you use SAP Solution Manager out of the box without any customizing? No. You need to execute basic customizing and maintain your landsape at the minimum.
    For example you have to maintain your landscape. Generate RFC connections, setup up monitoring if required. Configure EWA reports if needed. Service Desk and Change Request Management would be large configurations. There are some reports you can use.
    How can it be customized? Check out in transaction SPRO to get some idea, but not everything is in there covered you still need to configure.
    There is a SAP Solution Manager book published since this year. 
    Regards,
    Markus

  • Interview  questions need solution

    Dear all
    1. I have an interview question
    Is it posible to do credit check at base value say pr00 value, generally credit check is done at netvalue, all open items or total value but at base value is is possible
    2. Tcode for list of customers
    3. Can we delete CMR if yes how can we delete, if not why we can delete
    4. What is the system landscape of your latest client
    5. How shipment calculation can be done and what r the necessary configuration settings to carry out shipping calculation
    6. Is solution manager is implemented in ur company, how and why a SD functional consultant can use
    your immediate response is highly appreciated
    thanks
    sateesh

    Hi
    Here is more details in your question.
    1. Is it posible to do credit check at base value say pr00 value, generally credit check is done at netvalue, all open items or total value but at base value is is possible
    Ans : Basically in your pricing procedure there is a coloum Subtotal  with option A "Carry over price to KOMP-CMPRE (credit price)" it means whichever condition type you will maintain this option system will carry the credit check against the value of that condition type.
    2. . Tcode for list of customers
    Ans. For standard SAP t-Code is VCUST, for table level go to SE11 and use table KNA1(for General) KNVV (for sales)
    3.  Can we delete CMR if yes how can we delete, if not why we can delete
    Ans. Generally master data which is created in SAP you can not delete. You can only block the customer master for overall or some specific sales area level
    4. What is the system landscape of your latest client
    Ans. This is totally depands on customer. Some customer keep system landscape like DEVELOPMENT - QUALITY - PRODUCTION
             Whereas some client keep DEVELOPMENT - QUALITY - PRODUCTION - SENDBOX (REPLICA OF PRODUCTION SERVER for R&D or for support teams research purpose)
    5. How shipment calculation can be done and what r the necessary configuration settings to carry out shipping calculation?
    Ans.  This question is not cleared that what u required whether shipment cost calculation or transportation time calculation
              For Shipment cost you have to make setting in SPRO -- LOGISTIC EXECUTION -- TRANSPORTATION ---SHIPMENT COST (here you maintain the config of shipment cost)
    6. . Is solution manager is implemented in ur company, how and why a SD functional consultant can use
    Ans. Solution manager is very important implemantation tool. It is kind of document repository where u maintain all information of variouse implemantation steps. It is one place where you maintain the all information of project (whether project related issue with their processing status or other imformation)
    Regards
    Shambhu Sarkar

  • Biztalk Architecture Question - EDI Solution Setup

    I have to setup an EDI Solution .
    There are multiple trading partner with multiple transaction(850,810,832 , 867 Transaction).
    Please help me in set up the solution and Project structure .
    so that in future i will be able to add trading partner and transaction .

    Hi Mohit,
    For one of my client what we used to do use RoleLink and party for dynamic resolution of the part and send the message.
    So we
    Receive a message, this message will have ID which resolves the source
    Map it to canonical schema.
    Have a orchestration process mapped canonical schema
    Have a code in orchestration to resolve the destination, using Party
    Have RoleLink, connect the RoleLink to send shape.
    Configure the Party details with qualifiers to resolve destination details.
    Configure the send out to the party
    In the send port have outbound map specific to the destination system. In this map you can have maps for EDI.
    So when the new party comes in, just create Map, create send port configure it with outboundmap, and the Party with send port.
    So coming to project structure.
    External schemas-Inbound
    Canonical schema
    Maps
    Orchestration which Common-Orchestration which will have Role-Link
    External schemas-Inbound
    When the new party comes-in, you can create a new project/assembly for their map (and new project if the outbound schema change).
    Obviously you can have many solution, choose the one which fits you better.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Some Question about solution manager

    Question about Trusted/Trusting system solution manager
    1. What is the different between:- thease RFC SAP created automatically ? can we create ?
    SAPNET_RFC
    SAPNET_RTCC
    SAPOSS
    SM_NSMCLINT100_BACK
    SM_NSMCLINT100_TRUSTED
    TRUSTING_SYSTEM@NSM
    2. How EarlyWatch Report works, Is that Job run first in R/3 system or solution manager, and what job would be?
    3. In Tr: SDCCN "ToDo" where this data comes from ? what posible resons to check if data is not there in R3 system
    4. SM_CLNT100_BACK & SM_CLNT100_TRUSTED has login user: solman do we need to put password for that ?
    5. In R3 NQA system SMT1 there is no Trusted systems show: when create: messages "No authorization to logon as trusted system"
    Thanks in Advanced

    ok

  • Problem with Video Capture, and question towards solution

    Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
    I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
    My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
    Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
    thanks!

    For how and why this could have happened, would you mind sharing your capture and sequence settings?
    As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
    Alter one of your problematic clips
    Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
    Select the remainder of your problematic clips
    With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
    Select Basic Motion - under the Video options, on your left-hand side - then click OK
    (Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
    All your selected clips should be nudged up appropriately.
    But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

  • Question during solution manager installation SLDDSUSER

    Hi,
    During the installation sapinst ask me that :
    [http://fdf.cod.free.fr/screen10.JPG]
    my question is this one :
    Who is the user SLDDSUSER?
    Is it a user who exist already in the sld in order to connect on the sld?
    Or is it a user existing only on solution manager?
    Same question on SLDAPIUSER?...
    Did it better to changer their name for example choosing j2ee_admin for example.
    Thx by advance.
    Edited by: Fabrice BABY on Mar 20, 2008 4:44 PM
    Edited by: Fabrice BABY on Mar 20, 2008 4:49 PM

    Hi Fabrice..
    During the previous step you select Register in existing Central SLD() that mean that you are using one SLD already in your network.
    The SLDDSUSER and the API User are already in the SLD...
    If you dont know the password or you dont want to use a existing Central SLD..press back and select Configure Local SLD..there you create this 2 users and assign the passwords..
    bye
    Wence
    http://www.linkedin.com/in/solutionmanager

  • Some quick question for solution manager in 2 system landscape

    First of all is there any way to not implement Solution manager but to still be able to patch the system.?
    i really need it only for this.
    If there is no way to avoid the solution manager, tell me is the saprouter the only way for connection to SAP for the patches download. I don't need anything else for now.
    IS there a way to use a direct connection to SAP,?
    do the sAP router has to have 2 NICs where one is the public and one the private IP?
    i need to solve this one quickly so any help would be appreciated
    Thank you in advance!

    Hi,
    you do not need Solution Manager to patch the systems but you need Solution Manager to approve download basket for downloading pacthes.
    Information regarding the connection to SAP can be found at:
    Note 35010 - Service connections: Composite note (overview)´
    Hope this helps.

  • Folder flashing with question mark solutions

    How to fix the flashing folder with question mark, without software CD?

    auldlangsyne.09,
    follow Niel’s advice and boot your MacBook Pro with Command-R held down. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that it found errors, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; this will start your MacBook Pro in its normal mode. See if you get the normal login screen.

  • FTP to FQDN doesn't work- to IP, it does... question AND solution

    I have a 10.6 Server and i just setup FTP services. I am trying to ftp to the server locally. I can ftp to the IP address but I can not FTP to the FQDM. I tried to the ftp to just the domain name even though I thought it wouldn't work...and it did not. I even tried FTPing to the Bonjour .local address. Still no dice.
    On the failure cases , I get an authentication dialog followed by a "connecting..." dialog followed by a Connection Failed, " There was an error connection to the server "server.blah.com". Check the server name or IP address, an then try again."
    In checking the server logs, Open Directory shows authentication success and as expected, FTP has no further information, since FTP doesn't log login requests. SACL is not a problem since the user is part of an allowed group.
    My lookup and reverse lookup match. Cyberduck reports a "Connection refused" error.
    Anyone have any trouble shooting ideas?
    Well, in the time I spent writing this up and researching the problem, the problem has cleared itself up! Thanks for all your help!

    I have the same problem in Mac Book Pro Mid 2010 . But it happens both on the trackpad and mouse. If you want email me at [email protected] to discuss it

  • Simple question, hard solution (for me)

    Hi,
    I've made a jsp base application that works without problems
    Now I have to execute a class included in WAR file by command prompt because I want to make a scheduled batch procedure.
    I went to war directory and:
    C:\Program Files\Apache Group\Tomcat 4.1\webapps>java it.agic.interventi.ConnessioneDB -classpath Interventi.war
    Exception in thread "main" java.lang.NoClassDefFoundError: it/agic/interventi/ConnessioneDBPlease, HELPPPPPP !!!!!!
    Thanks in advance
    Bye

    Yes your classpath is wrong indeed. You need to build your classpath so that it contains all the thirdparty library jars as well.
    The "java" command gives the following hint:
    -classpath <class search path of directories and zip/jar files>
                      A : separated list of directories, JAR archives,
                      and ZIP archives to search for class files.So from this I can assume that in this directory you specified as your classpath:c:\program files\apache group\tomcat 4.1that the mail jar is not present there. You must get the correct path where these jars are present, and edit your "java" command's classpath option appropriately.
    HTH
    Gerrit

  • Simple Question, Easy Solution?

    Ok, i need help doing one thing. I have created a file with
    about 500 images in it. The problem is that I put the wrong images
    and some are duplicated. hence, I want to replace all of the images
    with images that I now have. Ultimately, is there ANY way to
    replace the batch of images without doing each one manually by
    going to Edit-->Replace (Or CRTL and F)? Can i extract the
    entire library from flash and but it on my desktop and replace
    quickly?
    Any help you GREATLY be appreciated, this project is very
    important to me

    LostRon wrote:
    > Ok, i need help doing one thing. I have created a file
    with about 500 images
    > in it. The problem is that I put the wrong images and
    some are duplicated.
    > hence, I want to replace all of the images with images
    that I now have.
    > Ultimately, is there ANY way to replace the batch of
    images without doing each
    > one manually by going to Edit-->Replace (Or CRTL and
    F)? Can i extract the
    > entire library from flash and but it on my desktop and
    replace quickly?
    >
    > Any help you GREATLY be appreciated, this project is
    very important to me
    >
    You can't automated that, tho you could simply maintain the
    images original names
    and upon import of all of them at once flash will ask whether
    you want to replace
    existing one. In the same time updating the one you want to
    change.
    Best Regards
    Urami
    !!!!!!! Merry Christmas !!!!!!!
    Happy New Year
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • [Forum FAQ] Date Deduplication frequently asked questions and solutions

    Q1: Sometimes we deleted a folder or a file on a deduped volume. The Free space is not released. How to do a refresh to show the correct result?
    A1: The following cmdlet could help to perform a refresh (Figure 1):
    Update-DedupStatus
    Figure 1: Force a refresh
    Q2: How to remove a file on a volume from Deduplication list after the whole volume is already deduped?
    A2: Run the following cmdlet:
    Expand-DedupFile –path: “X:\folder\file”.
    Note: It does not support wildcards in the -Path parameter (Figure 2).
    Figure 2: Error when use wildcards
    We can do standard PowerShell pipelining to automate for multiple files such as:
    dir X:\folder | expand-dedupfile
    Here is an example:
    Figure 3: Example
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    4. How to clear the SBOMailer queue?
    As a workaround, please use dummy or wrong SMTP server and send all those mails to that address.
    After sending those mail to dummy SMTP, you can see the mail status changed to "E" (Error), then after setting up the correct smtp mailer
    would not try to send the mails with status "E".
    5. How to use dialer in BP?
    1.How does this work?
    If you have Microsoft#s automatic phone dialer installed, you can press CTRL+TAB to automatically dial the numbers in the telephone fields.
    2. Are there settings I can change? In the System Initialization - General Settings - Services, to place calls directly through SAP Business One if a phone system or modem is installed on your computer or in your network, in these fields specify the area code and the number to dial for an outside line.
    3. How can I troubleshoot when this doesn't work? Try to check if the number is correct, the best way to check it is to use the MS Phone Dialer and to enter this number exactly as it is written in B1. If the dialer succeed dialing this number so B1 should succeed too, if the dialer failed check what is the problem with the number or with the Microsoft Phone Dialer.
    6. Iu2019m unable to set exchange rate in credit note
    To set an exchange rate in a Credit Note is only possible to if the credit note is not based on another document. In this case the exchange rate of the base document will be considered. Please see also SAP Notes [686224|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=686224] und [703028|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028]

  • DIP profile, simple question, no solution?

    Hi all,
    I have to create a quotation from a service order, and it looks like simple because I have 2 or 3 internal operations everytime and they have to be reported in quotation (DP80).
    Work Center for operations is the same, activity type the same... but I have to report exactly the same NUMBER of entry in quotation.
    Example:
    CS Order:
    Operation 10: Internal work center A: TEXT01, activity A, duration 1 hr. cost = 10
    Operation 10: Internal work center A: TEXT02, activity A, duration 2 hr. cost = 20
    Result in DP80 is:
    Item 1: Service material AAA price 30
    Requirement is:
    Item 1: Service material AAA price 10
    Item 2: Service material AAA price 20
    Is it possible?
    Thanks.

    Hi Frederico,
    yes this is possible. In the settings of the DIP profile you can go to: Characteristics, after selecting the Usage: Quotation creation and sales pricing. In the characteristics list you mark the Activity Type in the field: NoSummarization. If you choose F1 in this checkbox you get this explanation:
    No summarization
    Controls the second summarization level for dynamic items, meaning from dynamic items to items of the billing request. The indicator defines whether the characteristic is taken into consideration during summarization of the items.
    Use
    If you do not set the indicator, the system summarizes into an item all dynamic items in the billing request for which the same material was found during quotation or billing creation. This also applies even if, for example, the assigned activity type is different for both materials (see Case 1).
    If, for example, you do set this indicator (for example, for the activity type) the system does not summarize into an item the dynamic items for which the same material was found during quotation or billing creation if the activity types are different (see Case 2).
    Examples
    Case 1:
    The indicator No summarization is not set for the activity type.
    Dynamic item Activity type Material found
    12 h Activity 1 Mat 1
    5 h Activity 2 Mat 2
    1 h Activity 3 Mat 2
    When creating a billing request, the system creates the following items:
    Item Material Qty/Unit
    10 Mat 1 12 h
    20 Mat 2 6 h
    Because the indicator is not set for the activity type, the material "Mat 2" is summarized in the item of the billing request.
    Case 2:
    The indicator No summarization is set for the activity type.
    The system does not perform summarization in the item of the billing request, but instead lists the items separately by activity type.
    Item Actvy type Material Qty/Unit
    10 Activity 1 Mat 1 12 h
    20 Activity 2 Mat 2 5 h
    30 Activity 3 Mat 2 1 h
    Best regards
    Lars

  • Same "unable to import file" question, but solution did not work for me....

    I receive an error message as well and decreasing the size of the photo does not help.
    I scanned in images using the canoscan software. I can open the image in preview. The original file is about 4BM. I've save as a smaller 1MB file in Photoshop elements.
    I am still unable to import the image into iPhoto.
    Any thoughts? Again, the picture looks fine in Preview.

    I'm glad you got it to work.
    FYI:
    If you like editing in Photoshop Elements and would like iPhoto to link your edited version to the original, you can set PE as your external editor in iPhoto's Preferences. Then when you double-click in iPhoto, your pix will open in PE. If you do a straight Save, the edit will appear as the thumbnail in iPhoto. If you do a Save As or rename the file (including changing the file extension) you still have to Save As to the desktop and Import to iPhoto as a new Original. To edit in iPhoto with PE set as your External Editor, simply click on the Full-Screen Edit icon near the Key words icon at the bottom of the iPhoto window.

Maybe you are looking for