Queue / Support package issue

Hi everyone!
Can someone give me direction on resolving the following issue?
Ssytem: SAP ECC 6.0
I first updated the Kernel from level 58 to 83. eveything went fine from what I can see.
Then I have been importing a queue to implement some Support Packages. the import has now stopped with the following errors:
I am not too sure what it all means and where to go from there.
Thank you for any explanations or suggestions
Regards
Corinne
1 ETP199X######################################
1 ETP152 TESTIMPORT
1 ETP101 transport order     : "SAPK-60007INISOIL"
1 ETP102 system              : "QAS"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "370.00.09" "700"
2EETW165 Function "OIUREP_GET_RECENT_ROYHIST (OIUREP_ROY_HISTORY|05)" does not fit into the existing function group "(OIUREP_ROY_REPORTING|09)".
2 ETW167 Please transport the whole function group.
2EETW165 Function "OIUREP_GET_RECENT_VOLHIST (OIUREP_ROY_HISTORY|06)" does not fit into the existing function group "(OIUREP_ROY_REPORTING|10)".
2 ETW167 Please transport the whole function group.
1 ETP152 TESTIMPORT
1 ETP110 end date and time   : "20070213113558"
1 ETP111 exit code           : "8"
1 ETP199 ######################################

Hi Ammey and others ,
The queue import failed with the same error.
I have found in note 822379 that this message can actually be ignored.
SAPK-60006INISOIL - SAPK-60007INISOIL
           Symptom: If the Support Packages SAPK-60006INISOIL und SAPK-60007INISOIL are imported together in a queue, the TEST_IMPORT step returns an error for Support Package SAPK-60007INISOIL. The following error messages are displayed in the test import log:
Function OIUREP_GET_RECENT_ROYHIST (OIUREP_ROY_HISTORY 05)
   does not fit into the existing function group.
   (OIUREP_ROY_REPORTING 09)
Function OIUREP_GET_RECENT_VOLHIST (OIUREP_ROY_HISTORY 06)
   does not fit into the existing function group.
   (OIUREP_ROY_REPORTING 10)
           Solution: You can ignore this error by choosing 'Extras'-> 'Ignore test-import error'. The error will not occur during the later import.
based on your latest message (2.39 PM) suggesting to ignore "Warnings" I should be able to mark the queue now as "Ignore test-import errors" and bypass my original error. That was the only error of type 8 or above.
Thank you
Corinne

Similar Messages

Error getting in useradmin after support package issue!!

Hi all ,
We have just upgraded our support package for Bi_JAVA and other.According to our BASIS guy the package installation is through.
But when i checked the portal-----user adminnistration , iam getting the below error.
500   Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NoSuchMethodError: com.sap.tc.webdynpro.services.task.IRequestTask.isUsrLogoffRequest()Z
    at com.sap.portal.pb.PageBuilder.wdDoExit(PageBuilder.java:203)
    at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoExit(InternalPageBuilder.java:169)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doExit(DelegatingComponent.java:112)
    at com.sap.tc.webdynpro.progmodel.controller.Component.exitController(Component.java:255)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.exit(Controller.java:154)
    ... 27 more
See full exception chain for details.
Correction Hints
The currently executed application, or one of the components it depends on, has been compiled against class file versions that are different from the ones that are available at runtime.
If the exception message indicates, that the modified class is part of the Web Dynpro Runtime (package com.sap.tc.webdynpro.*) then the running Web Dynpro Runtime is of a version that is not compatible with the Web Dynpro Designtime (Developer Studio or Component Build Server) which has been used to build + compile the application.

Hi
Check SAP Note : 869852
I think it UME is not correctly installed
After upgrading your system to a newer SP, you get one of the following
exceptions when executing the UME WD application:
o java.lang.NoSuchMethodError:
com.sap.security.core.wd.umeuifactory.wdp.I
ExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/St
ring;
Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/St
ring;Ljava/lang/String;)Z at
com.sap.security.core.wd.maintaingroup.MaintainGroupComp.afterModel
Init(MaintainGroupComp.java:787)
In order to avoid this error, perform following steps:
- Open the SDM tool and undeploy all components starting with
"tc/sec/ume/wd/..."
- Go to your downloaded SP archives and find the UMEADMIN*.SDA.
Redeploy it.
Regards
Krishna.

CRM 5.0 - Middleware issues after Support Package installation

Hi experts,
after upgrading the support package (from version 11 to version 17) we are facing a lot of issues.
1. We need to synchronize custom tables from CRM to R/3.
Can you give me an example on how to configure table SMOFQFIND/CRMMAPTAB for inbound queues CRI*?
We know we have to do but we don't know how.
2. We need to synchronize standard tables from R/3 to CRM.
Do you know we have to do some new configuration in SMOFQFIND/CRMMAPTAB table?
With the older version of SP we were'nt asked to configure those tables.
It has worked up to now
Thank you in advance
Emanuele

Hi,
We have the exact the same issue her using the 0DAT variable to restrict to the system date (in the filter process of the APD).
Did anyone resolve this issue?
Thanks,
Fabian

ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.

Hi,
Can anyone advice on below issue?
ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.
Add the missing Support Packages or repeat the current step and change the add-on selection.
Missing Support Package(s):
Correction
Component
IW_FNDGC
I have manually download these components which is SAPK-10001INIWFNDGC and SAPK-10002INIWFNDGC and put it in the download directory and repeat the phase.
Besides, I also checked that these 2 components were inside EPS/in folder CSN0120061532 0083837 PAT and CSN0120061532 0079648 PAT
Thanks and regards,
Shu Jie

Hi Shu Jie,
you can't delete already installed add-ons. Please refer to note #1569624:
It is not possible to uninstall GATEWAY 2.0
Before you install the GATEWAY 2.0, keep in mind that you cannot uninstall ABAP add-ons.
The add-on GW CORE will be merged in IW_FNDGC. This information can also be found in above note:
Please
note:
GW_CORE 200 is not released for SAP_BASIS 740.
The successor is IW_FNDGC 100.
There are two possible reason for your error:
The stackfile is not well configured.
Your SUM is not the very latest one. SUM SP10 contained a bug in its first patch levels which shows retrofitted components in IS_SELECT.
Cheers,
Andreas

How to deal with delta queue when importing Support Package/Kernel Patch

Hi,
From my experience, when importing a Support Package for an installation, the system will issue an error message and get stuck if this Support Package is about to alter the structures used in delta loads.
But I would like to double with you if there is possible that the support packet which is going to alter structure, but no error message. If so, the delta data will be lost.
Do we need to clear down the delta queue every time we import support package?
Anyway, is there anyone have any suggestions or steps regarding this question?
Many Thanks
Jonathan

Hi,
Delta queues during support package upgrade
Its always better to drain the delta queues before an upgrade.
As a standard practice we drain the delta queues by running the IP/ chain multiple times.
As a prerequiste we cancel/reschedule the V3 jobs to a future date during this activity.
The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss.
V3 collector jobs should be suspended for the duration of the upgrade.
They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
See SAP Notes 506694 and 658992 for more details.
Page 17
Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
The SAP BW Service SAPI, which is used for internal and BW to BW data mart extraction, is
upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the
upgrade to avoid any possibility of data loss.
upgrade preparation and postupgrade checklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/3221895#3221895
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
/thread/804820
Effect on BW of R/3 Upgrade
How To Tackle Upgrades to SAP ERP 6.0
/people/community.user/blog/2008/03/20/how-to-tackle-upgrades-to-sap-erp-60
Start with the Why Not the How When You Upgrade to SAP ERP 6.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008dddd1-8775-2a10-ce97-f90b2ded0280
Rapid SAP NetWeaver 7.0 BI Technical Upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2b3a272-0b01-0010-b484-8fc7c068975e
Hope this helps.
Thanks,
JituK

R/3 Delta queues in support package upgrade

Hi gurus,
Our team needs to apply a support package upgrade to our BI 7.0 (without an upgrade in R/3 source system).
Do I need to worry about SM13 and RSA7 in my source system R/3 or just my data marts inside 7.0?
Or do I need to empty R/3 delta queues before BI upgrade to prevent data loss?
Best regards,
Enric

You may wish to take a look at below for few insights -
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
https://forums.sdn.sap.com/click.jspa?searchID=10299818&messageID=3221895
Hope it Helps
Chetan
@CP..

CRM Support Package Manager - Add transport request to queue

Hi,
I'm applying CRM Support Packages with SP_MANAGER on the production system.
I already applied these SP on the development system, I performed an SPAU adjustment, selected the corresponding transport request to use it on the production system, but SP_MANAGER didn't asked for this transport on the production system.
How can I add the SPAU adjustment to the queue with SP_MANAGER ?
Kind regards,
Christophe

Hi,
That's why I opened this message: in step 1 of the procedure described by the link (http://help.sap.com/saphelp_nw04s/helpdata/EN/de/151042f664e12ce10000000a1550b0/content.htm), the system should ask for a transport request. This is not the case here, despite the fact that the correct setting is set in SPAM.
Any other idea ?
That's not a problem since I can use a workaround (import via STMS when the system asks to perform the adjustment), but I wonder why the system doesn't ask for a transport request in the case of a CRM system.
Kind regards,
Christophe

SAPBINews NW7.0 BI Support Package 15 Issue

Hello,
We just Install "SAPBINews NW7.0 BI Support Package 15" after that
We try to load the data from CSV file to PSA
I am getting error message "*can not convert character sets for one or more characters*"
Do we need to apply any OSS NOTE to fix this problem?
Gurus please look into this issue I will assign fullpoints.
Thanks,

How do i know ?
Its just CSV file
It had Char Fields, Numeric Fields......some field having blank data like #
Thanks,

Support package upgrade / SPAU with multiple queues

Hello, We are upgrading our support package level on our ECC 6.0 system. I divided up the support packages into 4 different queues:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
SAP_BW
SAP_AP
SAP-HR
After importing each queue, I had a few things to do in SPDD and SPAU. I created a new SPDD or SPAU transport request for each queue. My question is now what is the recommended procedure to handle these SPAU/SPDD transport requests when you have multiple queues? I plan to define the same queues when doing QA and PRD. Do I mark all of the requests and then when I do each queue, I only specify that particular request? Thank you in advance for your help.
Best regards,
Russ Cook

Hi Russ,
when did you export the different SPAU requests or didn't you export them at all?
If the export happens only after all queues are already imported, this final system state (component version + SP level) is stored in the requests.You are then not able to include e.g. the request for the SAP_BASIS SPs into the SAP_BASIS queue, because the other components are still on the old version, while according to the request they should be on the newer state.
So, the right procedure would be; import the SP queue, do the modification adjustment for this queue, mark the workbench request as modification adjustment transport request and export this request. Then you can import the next SP queue.
Best regards,
Dirk

Importing Support Packages - Error during XPRA_EXECUTION

Hello,
Database: Oracle 10.2.0.4
Operation System: Windows Server 2008 X64
I´m facing with an error during an importing of support packages in our Solution Manager Ehp1 system (SPS 20 to SPS 25).
I checked the import logs of the queue and I see in there the following error:
Program terminated (job: RDDEXECL, no.: 02083200)
   See job log
Execution of programs after import (XPRA)
End date and time : 20110126020847
Ended with return code: ===> 12 <===
When I checked the job log I see in there this:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server SAPSM were synchronized
Internal session terminated with a runtime error (see ST22)
Job cancelled
I went to ST22 and I see in there that specific short dump which show:
Short text
    XSLT: No valid XML source
What happened?
    The transformation is not possible since the XML source document cannot
    be parsed.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not
     caught in
    procedure "TRANSFORM_FROM_XML" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Either the source document contains invalid XML or it is handled
    incorrectly in the ABAP program that called the transformation.
How to correct the error
    The most common cause of this error is a conflict between the encoding
    specified in the declaration <?xml version="1.0" encoding="..."?> in the
     document and the actual encoding of the data.
    If the document is held in an ABAP string, the actual encoding is the
    system code page. If this does not match the declaration, a parsing
    error may occur.
    These conflicts are a particular issue when XML documents are produced
    in one system and then imported into a system with a different code page
     (as strings).
    For this reason, XML documents should be held as binary data (X strings)
    , if they are extracted from the system or accessed from outside.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "XSLT_BAD_SOURCE_CONTEXT" "CX_XSLT_RUNTIME_ERROR"
    "CL_SM_BFR_CONTENT_TRANSPORT===CP" or "CL_SM_BFR_CONTENT_TRANSPORT===CM00E"
    "TRANSFORM_FROM_XML"
    The exception must either be prevented, caught within proedure
    "TRANSFORM_FROM_XML" "(METHOD)", or its possible occurrence must be declared in
     the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
Can you help how to correct this situation for I can continue the update of support packages!
Best regards,
João Dimas - Portugal

Hello William,
Which import logs do you refer?
I pasted in my first message the log of import... that is the unique error that it appeared.
I checked the SLOG:
STOP MOVE NAMETABS        SSM 6      20110125215838              SAP_BASIS    SAPSM 20110125214839404
START MAIN IMPORT          SSM I      20110125215838              SAP_BASIS    SAPSM 20110125214839404
STOP MAIN IMPORT          SSM I      20110125235752              SAP_BASIS    SAPSM 20110125214839404
START TBATG CREATION OF EN SSM n      20110125235752              SAP_BASIS    SAPSM 20110125214839404
START tp_getprots          SSM Y      20110125235753              SAP_BASIS    SAPSM 20110125214839404
WARNING: '\SAPSMsapmnt     rans     mpN110126.SSM' : cant open
(tpfsnam.c:504)
WARNING: '' : cant open
(tpfsnam.c:584)
WARNING: '\SAPSMsapmnt     rans     mpN110126.SSM' : cant open
(tpfsnam.c:504)
WARNING: '' : cant open
(tpfsnam.c:584)
STOP tp_getprots          SSM Y      20110126000148              SAP_BASIS    SAPSM 20110125214839404
STOP TBATG CREATION OF EN SSM n      20110126000148              SAP_BASIS    SAPSM 20110125214839404
INFO EXECUTION OF STANDAR SSM 9      not needed                  SAP_BASIS    SAPSM 20110125214839404
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all              SSM   0004 20110126000149              SAP_BASIS    SAPSM 20110125214839404
I also checked the ULOG which has the following records:
APServiceSSM 20110126013719 RFC: tp XPA ALL SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=\SAPSMsapmnt     rans (pid=5276)
APServiceSSM 20110126020829 RFC: tp SHOWPARAMS SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dtransdir=\SAPSMsapmnt     rans (pid=5196)
APServiceSSM 20110126020830 RFC: tp CONNECT SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dtransdir=\SAPSMsapmnt     rans (pid=5196)
APServiceSSM 20110126020831 RFC: tp XPA ALL SSM pf=\SAPSMsapmnt     rans inTP_DOMAIN_SSM.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -
Any idea what´s happen?!
Kind regards,
João Dimas - Portugal

Support Package Manger for EBP/CRM cannot confirm SP ???, 'Package unknown'

I am installing CRM 5.0 SR1 (Windows 32bit/Oracle/NW04s).
I have imported SAP_BASIS SP07 and SP08:
'Queue SAPKB70007 - SAPKB70008 imported successfully according to Standard scen.: Confirm this',
but I cannot confirm (Support Package - Confirm is grayed out). If I start Support Package Manager for EBP/CRM SPAM, I get a window: 'Package is unknown'; after continuing I get an exception 'PATCH_NOT_SPECIFIED'. The status window in SPAM shows:
Software Component: ???
SPAM Status: yellow triangle
Next Action: Confirm
Please help.

I ran into this issue. Upgraded spam from 38 to 42. When I go to env-EBp/CRM, the SPAM Package is unknown error came up
Resolution: go to support package -> import spam/saint update again. It tokk care of the issue. Contuniuing with upgrade.

Support Package still running in Import_proper phase ( KB70017)

Dear all,
When i appling Basis Support Package ( KB70017) , still its running the import_proper phase and its running around 12 hours .
kindly suggest me to resolve the issue
Regards

Dear all ,
i applied Basis Patch it took long time and still its not complete so i restart the server .
now i cant able to login SAP its giving Syntax error kindly advise me
i found these are the logs in this directory usr\sap\trans\tmp logs
1 , UMODPROT.SID log
ETN080X*************************************************************************
1 E0U531 "Report RSUMODSP (modified objects)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:40:03"
1 ETN080 *************************************************************************
3 E0U531 "Analysis for OCS Package Queue:"
3 E0U531 "SAPKB70017"
3 E0U531X"Special handling of SORTTABS tables..."
3 E0U532X"Check objects of request" "SAPKB70017"
3 E0U531X"Update modification information..."
3 E0U531X"Summary:"
3 E0U531 "No modified SAP objects found"
1 ETN080X*************************************************************************
1 E0U531 "Report RSUMODSP (modified objects)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:53:07"
1 ETN080 *************************************************************************
3 E0U531 "Analysis for OCS Package Queue:"
3 E0U531 "SAPKB70017"
3 E0U531X"Special handling of SORTTABS tables..."
3 E0U532X"Check objects of request" "SAPKB70017"
3 E0U531X"Update modification information..."
3 E0U531X"Summary:"
3 E0U531 "No modified SAP objects found"
AMODPROT.SID log
1 E0U532 "Report RSUMOD10_SP" "(Classification of Modified Objects)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:54:57"
1 ETN080 *************************************************************************
3 E0U533X"Fetch objects to be adjusted" "(SPDD)" "from UMODOBJ..."
4 E0U533 "Fetch objects from request" "SAPKB70017" "..."
3 E0U532 "0" "objects to be adjusted were fetched"
CMODACT.SID log
ETN085X"OCS Package Queue Import:" "15.01.2010" "10:23:11" " "
1 ETN085 "(De)activate customer exits:" " " " " " "
1 ETN085X"OCS Package Queue Import:" "15.01.2010" "11:23:22" " "
1 ETN085 "(De)activate customer exits:" " " " " " "
IMODPROT.SID log
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "09:45:14"
1 ETN080 *************************************************************************
Regards
1 ETN080X*************************************************************************
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:08:39"
1 ETN080 *************************************************************************
1 ETN080X*************************************************************************
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:54:58"
1 ETN080 *************************************************************************

Support pack Issue

Dears,
I am facing one issue in applying Support package.
I am getting error :
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
While In SPAM status is:
No queue has been define
SPAM status:green
In SAINT also there is no pending Support Pack.
Tried several times but same result.
Deepak.

hi deepak
try to reset the status of spam by
Run tcode SE37 (Functional module)
Program SPAM_RESET_STATUS
IV_FORCE - X
IV_TOOL - SPAM
IV_WITH_POPUP - X
Execute
retry the same
hope this will solve
Regards
George

Support packages in status canceled

Hi,
In our test system (SAP Netweaver 7.00 with Oracle 10.2) we got an error upgrading the support packages SAP_APPL 15 to 19. First, we deleted de contents of table PAT01. Now these are in status canceled in transaction SPAM. When we try to
define the queue again, we get the error: No Support Packages found for this selection.
Please, can you help us with this issue?.
Regards.

Hi Arjun,
I'm sorry, but I just finished to check again the table PAT03, and I have found the next entries:
PATCH                SHORT_TEXT                                     STATUS   DELIV_DATE   DELIV_TIME    IMPLE_DATE
SAPKH60015           SP 15 for SAP_APPL 6.00                   ?        07.01.2009       11:01:33          13.02.2012
SAPKH60016           SP 16 for SAP_APPL 6.00                   ?        20.07.2009       08:42:37          13.02.2012
SAPKH60017           SP 17 for SAP_APPL 6.00                   ?        25.02.2010       16:02:29          13.02.2012
SAPKH60018           SP 18 for SAP_APPL 6.00                   ?        13.08.2010       18:49:10          13.02.2012
SAPKH60019           SP 19 for SAP_APPL 6.00                   ?        31.01.2011       15:07:47          13.02.2012
What do you think about to delete them?.
Regards.

Support package update error

Dear all,
I am currently update my system.
The current version is ECC6 EHP7 based on NW7.4
SAP_BASIS 740 0002
SAP_ABA 740 0002
I would like to upgrade to SPS level 5
We use DB2 LUW 10.5
In the update phase, we encountered an error message:
SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
As I can see in the log file, error messages are as below
===========================
3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
3 ETP399
2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED                " - repeat
2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N A reference to column "SHLPNAME" is ambiguo
2EETP345 us. SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED                "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
3 ETP355Xstatements:
3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
3 ETP399 "AS4LOCAL" = 'A'
3 ETP399
2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL               " - repeat
2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL               "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP338XTouch Load of nametabs
===========================
I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
Do you have any idea how to solve this problem? Big thanks!
Best regards,
Fresh man

Hi Ashutosh,
Many thanks for your reply, yes this definitely solve my problem.
But I feel quite confused what's the real reason.
Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
The support packages are totally the same...
is it because I should upgrade from 02 to 05 directly? 04 has problem?
or I should update with SUM instead of SPAM?
or it is because of DB2??
or I should involve other packages like something like ST into the update queue?
Best regards,
Fresh

Queue / Support package issue

Similar Messages

Maybe you are looking for