Quickly relocate resources to the available node

version : 11.2.0.2 on RHEL 5.4
In our 2-node RAC , Node1 was hung for a while. So, I wanted to restart that Instance. But I had some 50 services running in Instance 1(Preferred Instance) which has to relocated before I bounce the instance.
Question 1.
Instead of using srvctl relocate for each service, Is there any way to quickly relocate all services to the Node2 (Available Instance) ?
Question2.
When a service is relocated , are DMLs running from sessions using that service be 'moved' to the available instance ? Or, is it just the SELECTs that can be failed over ?

J.Kiechle wrote:
version : 11.2.0.2 on RHEL 5.4
In our 2-node RAC , Node1 was hung for a while. So, I wanted to restart that Instance. But I had some 50 services running in Instance 1(Preferred Instance) which has to relocated before I bounce the instance.
Question 1.
Instead of using srvctl relocate for each service, Is there any way to quickly relocate all services to the Node2 (Available Instance) ?Issue shutdown immediate using SQLPLUS and all service will failover ( don't use srvctl stop instance", because service will not failover). I have tested it using Policy-Managed Database. So, you should test it using Administrador-Managed Database.
Question2.
When a service is relocated , are DMLs running from sessions using that service be 'moved' to the available instance ? Or, is it just the SELECTs that can be failed over ?If you are using TAF PRECONNECT with a BACKUP Connection, then only SELECT will preserve statements in progress.
A backup connection can be pre-established. The initial and backup connections must be explicitly specified. In the following example, clients that use net service name sales1.us.example.com to connect to the listener on sales1-server are also preconnected to sales2-server. If sales1-server fails after the connection, then Oracle Net fails over to sales2-server, preserving any SELECT statements in progress. Similarly, Oracle Net preconnects to sales1-server for those clients that use sales2.us.example.com to connect to the listener on sales2-server.

Similar Messages

Moving active node resources to the inactive node

We have a 2 node , majority disk, Windows 2008R2 failover cluster.   The active node is currently showing all resources and services on node A.   Node B is the inactive node.    we are about to perform a DataCenter shutdown
test.   Our application manager would like us to make Node B inactive during the DataCenter Shutdown test but he believes we can make Node B active if we do it this way:
1. power down Node B (inactive node)
2. power down Node A (active node)
3. power up Node A (active node)
4. power up Node B (inactive node)
By doing this way, he believes Node B will automatically become the Active node.
I do not believe this is correct.   I believe it has to failover to get Node B active. So, my proposal is:
1. power down Node A (active node) This should cause a failover of resources and services to Node B
2. Once all resources and services are on Node B, power Node B down.   Now, both nodes are powered down and Node B is holding the cluster resources and services and is the Active node.
3. Power up Node B (now the new Active node)
4. Power up Node A ( the new inactive node)
Which is correct?
Thanks in advance

Earlier question on ownership ... In a two-node cluster, ownership does not mean much. In multi-node clusters, it is often used with the anti-affinity property to try to keep certain resources from running on the same node. For example, if you
have a four node host cluster running two VMs that are also in a cluster, you would most likely not want both of the SQL VMs to reside on the same node of the cluster. Using anti-affinity and preferred owners, you can pretty much ensure the two VMs never
end up on the same node. In a two node cluster, ownership doesn't mean much.
When SQL is installed in a cluster, SQL is installed on two or more nodes of the cluster. SQL is actually running on each node on which you have installed it. In your case, both nodes are running SQL. By default, if something happens to
the SQL instance running on one node, it will try to restart on the same node, i.e. it will not immediately failover. There is a retry count and a time limit set up on the resource. If the retry count is reached in the specified time limit, then
the resource, in your case the SQL instance, will fail over to the other node of the cluster.
In the Failover Cluster Manager console you will see a selection option for Cluster events. That will show you all the event log entries that have occurred on both nodes of your cluster relating to cluster events.
.:|:.:|:. tim

404 'the requested resource is not available'

Hi All,
We created a KM iview and accessing Flash file. Some users are able to see the iview without error. Some users are getting 404 'the requested resource is not available' Error. They are not able to see the flash file in portal.
Can anyone advise me what the problem is and resolution steps for this?
Thanks,
Srinivasu.Y

Hi Srinivasu,
Well you already have lots of valid suggestions above but this problem might be causing for various reasons. As you have already checked the permissions for the set of the users having this problem, it might be worth checking if there are many nodes of the server instance and if any of these are not working properly. It can happen that when those set of users are trying to access the resource, the request is hitting specific server nodes which is unable to find the resource for some reasons. You can try asking the users to clear their browser cache and try again so that when the users try to access the same resource again it might go to different node this time.
But probably this is a temporary solution that might work as has worked in my case but there might be problem with some server nodes which is worth looking at.
Hope it helps.
Regards,
Gourav

I saturated all the available iPad (3rd. generation) screen space (home screens or desktop space) with apps, and the apps that got bumped out of the last screen, mysteriously disappeared? Where are those missing quick lauch app icons?

Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?

Christopher Doryan wrote:
Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
Wow, kind of a snotty response to someone who was taking their own time to offer help. Whether you thought it was helpful or not, didn't deserve such an unkind retort. Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
Just sayin.......
Oh and Meg offered the right answer. Put your Apps in Folders, which will create extra space for the apps which have disappeared.

Http Status 404, The Requested resource is not available

Dear Friends,
I am getting error with my tomcat that " The Requested resource is not available"
Kindly help me , What is the wrong with my code.
I am using Eclipse 6.0.1, Tomcat 5.5.20, jdk 1.5.0, j2sdk 1.4.0
My application is just to print user datas and my files are
*1. login.jsp*
<html>
<head>
<title>login Page </title>
</head>
<body>
<form action="login" method="post">
<table>
     <tr>
     <td>UserName</td><td><input type="text" name="username"/></td>
     </tr><tr>
     <td>Password</td><td><input type="password" name="password"/></td>
     </tr>
     <tr><td><input type="submit" value="login"/>
     </tr>
</table>
</form>
</body>
</html>
*2.web.xml*
<web-app>
<servlet>
     <servlet-name>login</servlet-name>
     <servlet-class>login</servlet-class>
</servlet>
<servlet-mapping>
     <servlet-name>login</servlet-name>
     <url-pattern>/login</url-pattern>
</servlet-mapping>
</web-app>
*3. login.java*
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class login extends HttpServlet
     public void doPost(HttpServletRequest req, HttpServletResponse res)
          try
          PrintWriter out = res.getWriter();
          String name = req.getParameter("username");
          String password = req.getParameter("password");
          out.println(name+" servlet page");
          }catch(Exception e)
          e.printStackTrace();
File Directory:
Myapp
! !-->src
! ! !--> login.java
! !-->WebRoot
! !--> META-INF
! !--> WEB-INF
! !--> Classes
! !--> login.class
! !--> lib
! !--> web.xml
-->login.jsp
CATALINA_HOME C:\Program Files\Apache Software Foundation\Tomcat 5.5
CLASSPATH C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\servlet-api.jar;C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\jsp-api.jar
path C:\Program Files\Java\jdk1.5.0_05\bin;C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin;C:\j2sdk1.4.0\bin
Please anyone give me the solution to solve my problem.
Thank you

Try moving your class file to a package
<servlet-class>com.logon.login</servlet-class>
! !-->src
! ! !-->com
          ! !-->logon
                    ! !--> login.java

[TOMCAT] [SERVLET] : The requested resource () is not available.

Hi!! I'm looking for an answer to my problem, and I'm going to explain what I mean.
I've created a .jar named yuhuuTunnel.jar that has the following structure:
yuhuuTunnel.jar:
--> web (contains the servlets)
      --> *.class
      --> HelloWorldServlet.class
--> META-INF
      --> MANIFEST.MF
--> SimpleClient.classThe code of HelloWorldServlet.java is this:
    package web;
    import java.io.IOException;
    import java.io.PrintWriter;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.ServletException;
    import javax.servlet.ServletConfig;
    public class HelloWorldServlet extends HttpServlet {
        public void init(ServletConfig config) throws ServletException {
            super.init(config);
        public void doGet( HttpServletRequest request, HttpServletResponse response )
                throws ServletException, IOException {
            doPost(request, response);
        public void doPost( HttpServletRequest request, HttpServletResponse response)
                throws ServletException, IOException {
            response.setContentType("text/html");
            PrintWriter out = response.getWriter();
            out.println("<html>");
            out.println("<body>");
            out.println("<body bgcolor=\"white\">");
            out.println("<h1>Yuhuu Servlet!</h1>");
            out.println("</body>");
            out.println("</html>");
    }then, using a .war file (created with ANT), I've created into /../tomcat/webapps/ a directory call yuhuuTunnel that has this structure:
    /webapps/
          --> yuhuuTunnel
                --> WEB-INF
                        --> web.xml
                        --> lib
                             --> yuhuuTunnel.jar
                --> META-INF
                        --> MANIFEST.MF
                             --> yuhuuTunnel.jar
                --> index.htmlThe content of web.xml is the following:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
    <web-app>
        
        <servlet>
             <servlet-name>HelloWorld</servlet-name>
             <servlet-class>web.HelloWorldServlet</servlet-class>
             <load-on-startup>0</load-on-startup>
        </servlet>
        <servlet-mapping>
             <servlet-name>HelloWorld</servlet-name>
             <url-pattern>HelloWorld</url-pattern>
        </servlet-mapping>
    </web-app>Tomcat works correctly ( http://localhost:8080 return me the page of tomcat ) but when I try to use the HelloWoldServlet typing http://localhost:8080/yuhuuTunnel/HelloWorld into a browser, this one returns me the HTTP Status 404 - The requested resource () is not available.
What is wrong? The address that I type into the browser or there's an error into web.xml?
Something interesting: If I type
http://localhost:8080/yuhuuTunnel/HelloWorld
the message given back is: "The requested resource () is not available."
but if I type
http://localhost:8080/HelloWorld the message is different:
"The requested resource (/HelloWorld) is not available."

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<servlet>
         <servlet-name>HelloWorld</servlet-name>
         <servlet-class>web.HelloWorldServlet</servlet-class>
         <load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
         <servlet-name>HelloWorld</servlet-name>
         <url-pattern>HelloWorld</url-pattern>
</servlet-mapping>
</web-app>Please change the servlet url pattern from
<url-pattern>HelloWorld</url-pattern>to
<url-pattern>/HelloWorld</url-pattern>in servlet mappings
REGARDS,
RaHuL

Value not available in the context node

Hi,
I have created one custom component through BSP_WD_CMPWB with only one view called u2018partneru2019 with sample button.
In this view partner ,then created one model context node with reference to u2018 BuilHeaderSearchu2019 search component with only one attribute u201CPartner IDu201D.
When I test the component , WebUI screen shows partner id input box, and sample button. After entering partner id value in the input box, then I am pressing sample button. But entered value not available in the context node. Please help me, how can i get this value?
Kathir.

Hi,
Check the set_method of that attribute and compare with standard.
Regards,
Shobhit

Error after Installing PDK - (404 The requested resource is not available)

Hi
I recently installed my PDK over my existing Portal 6.0 using SDM Tool. I downloaded PDK_6.0.14.0_BusinessPackage from SDN. I deployed pdkcontent6.0.14.0.SCA file using the SDM Tool. It installed successfully. But when i go and check the links under 'Portal Content Development ' , it gives me a 404 - The requested resource is not available.
Please help out.
Regards,
Murali.

Hi All,
I am also unable to deploy pdkcontent6.0.14.0.sca completely. I get the exception below
===========================================================================
Deployment started Thu Jun 22 11:01:34 IST 2006
===========================================================================
Starting Deployment of TutWD_KMBrowser
Finished with warnings: development component 'TutWD_KMBrowser'/'local'/'LOKAL'/'0.2005.11.09.09.51.44', grouped by software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/TutWD_KMBrowser and wait. Reason: Clusterwide exception: server ID 309660150:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/TutWD_KMBrowser cannot be started. Reason: it has hard reference to resource com.sap.km.application with type application, which is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:596)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:147)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:327)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:230)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4705)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4610)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4583)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/com.sap.km.application', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/com.sap.km.application
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4359)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:588)
     ... 21 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::local/TutWD_KMBrowser', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::local/TutWD_KMBrowser
     at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:886)
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
     ... 23 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::local/TutWD_KMBrowser
     at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
     at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
     at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
     at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
     at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
     at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:882)
     ... 24 more
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.km.application
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:415)
     at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
     ... 29 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of TutWD_KMBrowser finished with Warning (Duration 9504 ms)
Starting Deployment of pdk-content
Finished with warnings: software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
No further description found.
Deployment of pdk-content finished with Warning (Duration 1152 ms)
===========================================================================
Deployment ended Thu Jun 22 11:01:47 IST 2006
===========================================================================
Please resolve this issue.
Regards,
Amjad

ESS/MSS - Error " 404, The requested resource is not available."

Hi
I have deployed below archives in the EP 7.0 SP14 system. My back end system is ECC 6.0 with SP14.
1)BP ERP05 ESS 1.0 with sp14
2)BP ERP05 MSS 1.0 with sp14
3)SAP ESS 600 with sp14
4)SAP MSS 600 with sp14
5)SAP PCUI_GP 600 with sp14
We are getting " The requested resource is not available." error after clicking on
Working Time tab.
Can anyone suggest me whether i need to update any higher level patches from EP and ERP side ?
Or what could be the problem ?
Thanks in Advance,
Vinay

Hi Vinay
Check below steps one by one for your application.Whch is very helpful link.
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
Regards
-SS

Portal Error 404 (The requested resource is not available)

Dear,
I have faced the below error in our Portal (6.0), I have created a new role that its linked normally with worksets, pages and i-view, all the way to custom SAP R/3 transactions, most of the users are able to see and execute these transactions, but one of them faced the below error, please advise? What it could be the problem?
404
The requested resource is not available.
stack trace
com.sapportals.wcm.protocol.webdav.server.WDServletException
at com.sapportals.wcm.protocol.webdav.server.WDObject.throwNotFoundIf(WDObject.java:54)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:110)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:775)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:334)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)

check whether user has end user permissions or not

The requested resource is not available - Please help i want to complete it

Hi,
Im using netbeans 6.0 and java 1.6 update 3.
While executing my netbean web application it is saying that the requested resource is not available
Please help
I have to complete it with in this week
for your information i have formatted my OS and reinstalled
windows 2000
apache tomcat server 6.0.14 version im using
before formatting it was working fine.
Thanking YOu.
R.Muthu Kumar.

I looks like you have classpath issues deleted. why not download latest netbeans bundled with tomcat that should work smoothly.

Can Resource Group Virtual IP be same as that of any of the Cluster Node?

Hi,
Can Resource Group Virtual IP Address be same as the IP Address of any of the Cluster Nodes?
As in if my Cluster node (node-1) has IP Address, say 172.23.28.218, then can I configure a Resource Group with the same IP Address, i.e. 172.23.28.218?
Thanks,
Chaitanya

Chaitanya,
Short answer - no. The physical nodes have IP addresses which are fixed and unique. A RG group can have 0 or more logical hosts (IP addresses) associated with it, one per subnet, that are also unique.
Regards,
Tim
---

How to change the primary node for a resource group. Solaris cluster. 3.2

I have searched for hours to try to find this answer.
I want to change the primary node of a resource group.
example.
log-rg runs on node1.this.com it will list node1.this.com first when you do clrg status.
But we run it on node2.this.com
A reboot will have log-rg run on node1 after a reboot. We have to switch it by hand to run
on node2 .
I want it to know that it should always try to first run on node1, but still failover to node2 if the situation arises.
scswitch -z -g log-rg -h node2 (and all the fully qualified versions of this command)
would not work.
How tow can I change the primary node for log-rg (logZ) from node1 to node2???
thanks!

Hi.
Show current configuration for RG:
clrg show -v log-rg
For change order Nodelist you can:
clrg remove-node -n node1 log-rg
clrg add-node -n node1 log-rg
But tis command more destructive. It may be problem add-node back to this RG.
I don't know why Validation of resource log-tiv in res group log-rg on node1 failed.
Need more know about configuration, resourse type, etc.
May be it's better create for test small RG and try move and change resource.
Nodelist - say candidates for run this resources. But at this moment RG can run on any from this list.
Docs about Sun Cluster.
http://download.oracle.com/docs/cd/E19787-01/820-7360/fxjbo/index.html
Typical tasks:
http://download.oracle.com/docs/cd/E19787-01/820-7359/z40002701009474/index.html
Adding or Removing a Node to or From a Resource Group
http://download.oracle.com/docs/cd/E19787-01/820-7359/z400043a1055200/index.html

The requested resource /HelloName not available

Hi all,
I am new to servlet technology
I am trying to execute a simple servlete HelloName, I am having a html page which action="/HelloName". When I say Submit it is giving me "The requested resource /HelloName not available" error.
My servlet class is located at
"<inst dir>/webapps/Myservlet/WEB-INF/classes" folder.
The html page is at ""<inst dir>/webapps/Myservlet".
The web.config content is as below
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>My Servlet Examples</display-name>
<description>
My Hello Servlet Example.
</description>


<servlet>
<servlet-name>HelloServlet</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>HelloName</servlet-name>
<servlet-class>HelloName</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/HelloServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HelloName</servlet-name>
<url-pattern>/HelloName</url-pattern>
</servlet-mapping>
</web-app>
The html page is
<html>
<title> Hello name client </title>
<FORM METHOD=GET ACTION = "/classes/HelloName">
PLEASE ENTER YOUR NAME:
<INPUT TYPE=text NAME="name">
<INPUT TYPE=SUBMIT NAME="SUBMIT" VALUE="SUBMIT">
</FORM>
</html>
The servlet code is-
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
class HelloName extends HttpServlet {
public void doGet(HttpServletRequest req, HttpServletResponse res) throws IOException{
String name = req.getParameter("name");
res.setContentType("text/html");
PrintWriter out = res.getWriter();
out.println("<html>");
out.println("<head><title> HELLO NAME SERVLET DISPLAYS THE NAME OF THE USER ENTERED </title></head>");
out.println("<body> Hello "+name+" good morning </body>");
out.println("</html>");
Please let me know why am I getting this error.
Thanks in advance
Mithun

Your servlets MUST be packaged, they cannot be part of the root package. And your action should be /Myservlet/HelloName.

0x800713CF: The owner node cannot run this resource (SQL)

I have SQL 2012 SP2 service on 2 FC nodes of 2012 R2 servers. Everything were working fine about a year, but now my first Node got mixed up with updates and it is offline now. Problem is, that second Node cannot start SQL services By its own.
I checked/tried:
- I checked, that other services related to SQL are online.
- I chenged Node´s ownership to SQL service
- Cluster name has full Access rights to OU where all Computer record of this service are in place
The error I get:
0x800713cf:The cluster resource cannot be brought online. The owner node cannot run this resource.

Thank you both. I´m not sure, how to to check the workload. In FC graphical GUI, both nodes are memebers in owner group, same Place where the owner order can be changed or owner can be disabled. I gone through entire FC management snap-in
and didn´t find any other places or settings to go through. The article kb313882 Umesh refers, is for Server 2008, and I have 2012 R2. Command
cluster res <var> name of resource</var> /listowners is not supported (there is no such command). I got first node up and running, and then SQL services were ON again, but if I shutdown first Node, SQL services will go down
and won´t come up. Disk storage are online and SP level matches.
Please could you guide me step By step, how to check ownership in 2012 R2?

Quickly relocate resources to the available node

Similar Messages

Maybe you are looking for