Can Resource Group Virtual IP be same as that of any of the Cluster Node?

Hi,
Can Resource Group Virtual IP Address be same as the IP Address of any of the Cluster Nodes?
As in if my Cluster node (node-1) has IP Address, say 172.23.28.218, then can I configure a Resource Group with the same IP Address, i.e. 172.23.28.218?
Thanks,
Chaitanya

Chaitanya,
Short answer - no. The physical nodes have IP addresses which are fixed and unique. A RG group can have 0 or more logical hosts (IP addresses) associated with it, one per subnet, that are also unique.
Regards,
Tim
---

Similar Messages

  • I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

    I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • Dear All, today i am trying to generate a chm in Robohelp 11, by combining two topics under a single book but again and again i am facing same issue  that is "Cannot open the file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm"

    Dear All, today i am trying to generate a chm in Robohelp 11, by combining two topics under a single book but again and again i am facing same issue  that is "Cannot open the file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm"
    Amy_WongWoojinDebbieclawsonmghalpinjwarrenJochem van DietenLee Design
    Please help me in solving the same

    HI,
    Thanks for the response.
    I am really tensed for the same...
    Actually the error occurs in the following case:
    1. I am creating a Parent folder in robohelp with the name ABC..
    2. Next Under ABC i have created 2 separate folders say XYZ and EFG.
    3. Under XYZ i have created various Topics say 2 or 3.
    4. Under EFG i have created various Topics say 7 or 8.
    5. Now, i have created a TOC with name for ABC (Parent Folder.)
    6. Next i have dragged and dropped my two sub folders that i have created under ABC in Project Set up wizard that is XYZ and EFG, in order to generate the webhelp first and then the CHM file fo rthe same.
    7. Webhelp is successfully getting generated.
    8. But when i convert the Webhelp to CHM Converter, after few seconds the robohelp gets halt and it shuts up the robohelp, showing a message dialog box that the Adobe Robohelp 11 is Troubleshooting for the error, the Windows manager will get back to you..Someting like this, the .CHM file for the same gets generated on the described path, but when i click on it, it does not open and shows the error as "Cannot open file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm".
    Please  help me in sorting the above issue.
    According to me:
    I think i am Lacking in the two things:
    1. How to link all the topics with the parent folder.
    2. How to Merge the projects.
    Can you please provide me the link where i can get tutorial to create a TOC for multiple files in a same TOC and to generate a chm for them.
    Actually for single project folder i have worked successfully. But, its first time i have to create a chm with lot many sub folders in it, as like one create a book.
    Please help
    Thanks & Regards,
    dhm

  • If I add a new account user,can I sync my iPhone and iPad to that account without effecting the other user?

    If I add a new account user,can I sync my iPhone and iPad to that account without effecting the other user? I'm trying to sync my iPhone and iPad  to a new account on a computer I am now sharing after my computer died.

    Don't create a new iTunes account.
    Just update everything with new info/change password/ security questions.
    -> https://appleid.apple.com/

  • As with others I can't export from Lightroom 4 to Elements 10 or any of the Nik products except HDR

    As with others I can't export from Lightroom 4 to Elements 10 or any of the Nik products except HDR Efex pro. Surely this has been fixed? If not it is appalling. It has been going on for too long in a program that has supposed to have some integrity

    I am able edit pictures in PSE (Photoshop elements) 10 BUT i am unable to edit videos in PRE (premiere elements) 10. I will uninstall LR 4.1 RC1 and then install RC2 and use a backup of the catalog. Lets see if that works.

  • HT2731 How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..

    How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..

    As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
    Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

  • I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    Warranty and support is only valid in the country of origin.  The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
    Warranty is determined by device (serial number), no documentation required.
    Apple does not repair devices, they replace them.  For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

  • I can't open Keynote documents in Keynote'09 that was exported from the latest Keynote software. Why is that?

    I can't open Keynote documents in Keynote'09 that was exported from the latest Keynote software. Why is that?
    specifivations of my Mac: MacBook Pro 10.8.5, 2.66GHz INtel Core Duo,
    Keynote version installed: Keynote '09 5.3
    Thanks a lot for your help,
    Dirk

    This work around has always worked, it may make some changes to transitions but better that than be unable to  open. 
    Export  from version 6 as a PowerPoint, choose PowerPoint 2003 in the in advanced options.
    Once you have the PowerPoint file open in Keynote.

  • Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played on non-apple music devices that do not support the M4A format?

    Is  it legal to convert the music files, which I have purchased in recent  months, to the mp3 format and burn them on to a CD so that they can be  played on non-apple music devices that do not support the M4A format?

    Hi,
    This is what apple says about converting files http://support.apple.com/kb/PH12167
    Jim

  • How can I update cluster items from inside a while loop that does not contain the cluster?

    I have a VI that contains front panel clusters and two while loops. The main cluster contains items such as a doubles "distance" and "stepsize" and boolean "step" (a whole buch of this type stuff). The first loop contains an event structure to detect front panel changes and the second contains code and sub VIs to perform operations based on detected events.
    The operator can enter data into either double or click the boolean. If distance is changed the second loop does what is required to process the change. The same happens with stepsize. If step is clicked the ±stepsize value is added to distance and the result is processed. In each case the front panel should track the result of the input and subsequent processing.
    Because the clusters are outside the while loop, they are not updated unless I click 'highlight execution' which seems to allow updating each time the execution highlight is updated. There are other issues if I move the clusters into one of the loops.
    I've tried referencing the clusters and using local variables and nothing works. It looks like overkill to use shared variables for this.
    Any ideas would be greatly appreciated.
    Thanks,
    Frank    

    Hi Ben,
    Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case? 
    What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
    All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI.  Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
    I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
    Thanks again for the suggestion,
    Frank 
    Attachments:
    Front Panel Reference.vi ‏33 KB

  • Where can i get a iphone 5s user manual that is specific to the ATT iphone 5s?

    I'm looking for a user manual that is specific to the ATT iphone5s. All I can find is the generic manual from the apple site. There must be one that specifically addresses all the features, icons and apps on the ATT version.  I also own a Samsung Galaxy 4S and I was able to download the ATT manual for this phone, so there must be one for the ATT iphone 5s somewhere?  Can anyone help?  Plaese don't say go to ATT, they were no help at all.

    The iPhone 5s manual is here:
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    There is no carrier specific version as there is no real difference between carrier specific phones. The hardware and OS are exactly the same. There are no additional AT&T apps or features for iPhones that would be pre-installed. iPhones are identical across the board. 
    Any Additonal AT&T apps can be downloaded from the App Store and would have their own Help or guide to use them.

  • How can I recover files from a hard disk that I erased using the Erase Disk command in Disk Utility?

    Thanks for your help!

    Kappy wrote:
    True but a DVD is a lot less expensive than the cost of commercial recovery software. TestDisk is also free but it is a set of Terminal programs.
    Yes, it's not for GUI only using folks.
    Free Linux alternatives are awkward. First, you have to download a Linux ISO and burn it to a DVD. Then boot the live demo and install Linux. That requires first partitioning the hard drive.  And, on and on. It's nice if you already have a Linux installed.
    Linux doesn't have to be installed. It can be loaded into RAM for the duration of the recovery.
    Even if PartedMagic can be downloaded with a bootable Linux system it must still be burned to a DVD.
    Any computer can be used to burn the ISO to disk, which makes it attractive in that regard.
    Once PM is burned and booted off of it's loaded into RAM and flushed upon a reboot.
    But the data recovery software in PM requires familiarity of the command line. That's it's drawback unfortunately.
    However one can transfer files that were not deleted using this method.
    ...using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    Those "bootable cd's" of Data Rescue, File Salvage, and TechTool are probablly using Linux as it's a free OS.
    Apple won't allow their OS to be used, Microsoft charges a huge license fee. So that only leaves Linux.
    The user likely won't know that they are using Linux when using the bootable recovery disk, all they see is the recovery GUI.
    Data Rescue is likely best downloaded, installed and run from a familiar OS X installed on a new HFS+ formatted external drive, then option booted from.
    This would be faster than waiting for bootable disks to arrive in the mails. One has to use a exteranl drive anyway larger than the drive being recovered to hold all the potential recovered data.

  • HT202213 can i use home sharing with a computer that is not in the same house hold but uses the same apple id?

    Hi my dad has my laptop and i need to transfer everything to my new iphone5 that i got reacently but thing is i cannot do that because he lives in asia so i can't get a hold of my laptop to transfer everything can i use home sharing even if he is that far ? to transfer all the materials to my iphone5 or is it possible if i use homesharing on my iphone4s to share the music apps.. ect. to my new iphone? please and thank you

    If you are using the same iTunes library (meaning the exact same iTunes folder), it should work fine.

  • Can I use a inputHidden for javascript values that doesn't set the value?

    I have a hiddenInput field for each row in a datatable so I can restore default values to a date field with a javascript function. I am getting conversion errors because I don't have the right setters in the backing object - and I really don't want to put them there - but I don't want the tag to set the values! Is there any way to just set a hidden value somewhere for each row of a datatable but not have it try to set the value? Thanks in advance!

    I just realised that won't work because all the HTML tags will have the same name, whereas I need the dynamically generated suffix that a dataTable assigns to every element in the row i.e. '_id34', so I can reference the value in the javascript and compare it to entered values. Any more ideas? I am having huge memory problems when I'm submitting my form too, using up 2GB of mem and then dying! I'm not sure what's causing it, because it doesn't get as far as my action method code before it dies! It works for smaller tables but I need to be able to handle ~20 users with tables 4x the size I can process now without running out of memory :( Any help would be really really appreciated!!

  • I can't restore my iPod: Haven't seen this on any of the forums!!

    I will try to make this brief to save time.
    I connected my 4G iPod Photo.
    iTunes started up.
    Got the "corrupt iPod" message.
    Clicked "Restore".
    Connected to charger to complete the restore.
    Restore completed fine.
    Connected the iPod again.
    iTunes started up.
    Got the "corrupt iPod" message again.
    I have done every possible troubleshooting step, both here on the Apple site and on the wonderful WWW.
    NOW, here is the issue I have, that I haven't seen anywhere else...please read and understand this part!
    - When I plug the iPod into the computer, I hear the USB connection sound.
    - I check My Computer and there it is; Drive E: IPOD
    - I go to iTunes Help > Diagnostics > iPod, and the green dot is there.
    - I check the Diagnostics report, it shows my iPod is "truly mounted", has the correct serial number, correct iPod software version etc etc
    - Here's the kicker: After all this, the iPod does NOT show up in the pane on the left side of iTunes!! I have uninstalled then reinstalled iTunes, I have version 7.1
    - I cannot restore it again, because it doesn't show up for me to restore! But the Diagnostics in iTunes say it is there and mounted. I also cannot format it in My Computer...I click 'Format' and nothing happens. So I am stuck in a loop.
    Can anyone please help? THANKS!

    What model was the old iPod?
    What model was the new iPod?
    The new one has to be same or newer model than the old iPod
    First just set the iPod up as new.
    Then update the iPod by going to Settings>General>Software Update
    After upodated go to Settings>General>Reset>Erase all Content and Setting. \When done setup by restoring from iCloud backup

Maybe you are looking for